Problem on Error Message at Table Event

Hi ,
I have one table where I used EVENT-01 which will trigger in the time of SAVE .
when I maitain data through SM30, I have all New Entry in this Event.
I validate this entry and if there have any problem I am displaying Error , But it will EXIT from the Maintain Screen.
But I want to go to the Maintain Screen with Error.
How Can I do this ?
I also tried with EVENT-05 there I can do all item check .But here i didnot get all the Line Item.
But I need all the line item at a time and then I can validate my requirement so i have to do validation in EVENT-01 .
Please tell me How I will do this validation .

Actually I want to check .....
This Table has 33 fields with 8 Primary key. There have 1 field name Sequence Number .
If there have 10 numbers of entry and and among them three entry has same Sequece Number , then I need to check some data
with in these three Entry .And if it fail then I want to display error and go to the Maintain Screen to correct the data

Similar Messages

QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

Hello QM expert,
I encounter a error when I make a UD. (Please refer to below screenshot. )
Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.' (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
Case 3: I only fill one field [to new material. It can be passed, no error message.
Could you please give me some guidance? Thank you so much.
Best Regards,
Fanchao Bu

Hi Fanchao,
Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
1. Is this a normal PO or Sub-contractor's PO? Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
You can also check SAP notes below, based on the business needs:
1. 403671 - Error M7001: 'Please check table &...'
    401462 - Error M7001: 'Please check table &...'
    201833 - M7001: 'Please check table XEKPO: Entry & &...'
    2072019 - Error M7001 raised during posting goods receipt
    407265 - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
    439945 - GR w/ freight costs for stock transport ordr w/ML currencies
    521090 - FAQ: Stock transfer to stock transport order
    867878 - Inconsistencies in the EKBE table because of conversions
    214814 - M7001/M7361: Table T156M, entry MAA7 2
    1584493 - Overdelivery check for GR blocked stock with GR-based IV
    102863 - GI f.delivery f.a stock transfer w.delivery costs
2. 409529 - Price differences during goods receipt for purchase order
3. 1528009 - MAA: incorrect distribution of goods receipt quantities
4. 1569831 - MAA2: Composite SAP Note after Support Package SAPKH60504
5. 406973 - M7001: Please check table XEBEFU: Entry does not exist
6. 70577 - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
7. 824322 - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
Thanks,
Arijit

"Error 16" solution doesn't solve problem, same error message pops up. Further steps?

Steps followed: all Adobe products (CS6 Suite and CC) have been removed (w/uninstaller and manual Library cleanup) and reinstalled (from discs and downloads); permissions corrected as per KB note on Error 16, to no change. This occurred after updating Mac OS to 10.9x. The OS was then reinstalled, new admin & standard users created (MacPro hardware passes all tests). "Error 16" permission solution performed at every stage to no change in error generation. Adobe Reader, Lightroom 4, and CS6Bridge do launch, but Acrobat Professional, Photoshop (13, CS6), and CC Photoshop stop launch w/error 16. Stumped!

Thanks for the suggestion, Gene, but it had no affect on the ³error 16²
situation, I¹m afraid. I think I¹m going to have to start with a new drive
and import/update until I find the source of this issue.
Jim
"Error 16" solution doesn't solve problem, same error message pops up.
Further steps?
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop
General Discussion - View the full discussion
<https://forums.adobe.com/message/7154907#7154907>
Permissions problem. Open Terminal and copy/paste this line: sudo chmod -R
777 /Library/Application\ Support/Adobe Gene
If the reply above answers your question, please take a moment to mark this
answer as correct by visiting:
https://forums.adobe.com/message/7154907#7154907 and clicking Correct¹ below
the answer Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
Please note that the Adobe
Forums do not accept email attachments. If you want to embed an image in your
message please visit the thread in the forum and click the camera icon:
https://forums.adobe.com/message/7154907#7154907 To unsubscribe from this
thread, please visit the message page at
, click "Following" at the
top right, & "Stop Following" Start a new discussion in Photoshop General
Discussion by email
<mailto:[email protected]> or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=4694> For more information about maintaining your forum email
notifications please go to https://forums.adobe.com/thread/1516624.
>

DISPLAYING ERROR MESSAGE FOR TABLE

How can I dispaly error message for table havong input fields from message pools,so that when I clicks on that message,that should point to that particular field having error
Thanks
Fahad

Hi Fahad,
From Message pool retrive data using text accessor
IWDTextAccessor textYesAccessor = wdComponentAPI.getTextAccessor();
String tempYes = textYesAccessor.getText(IMessageSample.<YES>);
You can report error message like.
if(tempYes !=null)
reportException(String message, boolean cancelNavigation);
See this link for Webdynpro API..
https://media.sdn.sap.com/javadocs/NW04/SPS15/wd/index.html
Regards
Suresh

Displaying error messages in table...

Hi All,
How can we display error messages in a table in a bsp page.
I am filling an internal table in OnInputProcessing on some event with all the error messages to be displayed.
Table sould have two columns
1)Graphic depending on error type.
2)Error message.
Thanks,
Anubhav.

Hi Graham,
The solution is perfect!
One more thing...when the page is displayed with errors table , i need to set focus on the table.
My code is:
<htmlb:gridLayoutCell columnIndex="1" rowIndex="1" id="fourthmain">
<% if itab_message is not initial .%>
<table class=""urGridLayout" border="1" cellpadding="2" id="err_tab">
    <%
loop at itab_message into wa_message.
    %>
    <tr>
    <td class="urCoB2Whl">
    <% case wa_message-typ.
      when 'S'. %>
      <htmlb:image src = "ICON_MESSAGE_INFORMATION" />
      <% when 'error'. %>
      <htmlb:image src = "ICON_MESSAGE_ERROR" tooltip="Error" />
      <% when 'W'. %>
      <htmlb:image src = "ICON_MESSAGE_WARNING" />
      <% when 'I'. %>
      <htmlb:image src = "ICON_MESSAGE_INFORMATION" />
      <% when 'A'. %>
      <htmlb:image src = "ICON_MESSAGE_CRITICAL" />
      <% endcase. %>
    </td>
    <td><font size="2" face="Times">
    <%= wa_message-msg%>
    </font>
    </td >
    </tr>
    <%
endloop.
    %>
    </table>
<% refresh itab_message. %>
<% endif. %>
      </htmlb:gridLayoutCell>
I tried using
<phtmlb:focusRect focusElementId="err_tab"/>
and also:
<s cript="text/javascript">
daument.farm.elementid.focus();
</s cript>
But failed...pls help me out.
Thanks,
Anubhav.

Crw32.exe has encountered a problem.. error message

I am using Crystal Reports 10 to create reports. I am selecting tables from two different SQL databases on two different servers. I have successfully used each of these tables in other reports, independently.
I link the tables with an inner join. Once I attempt to actually use a field from the second table in my report, I get this error:
crw32.exe has encountered a problem and needs to close. We are sorry, etc,etc.
Any suggestions?

Some of the users are getting the following error message while trying to open the Crystal Reports from Mobile Sales.
"This program is used to host and to initialize the UF F has encountered a problem and needs to close. We are sorry for the inconvenience."
I think, this is a windows error.
Can you please let me know where can I find any update about these issues?
Has anyone ever come across this type of error?
Thanks in advance.
Regards,
Pijush

Problem when error message in exit Save document prepare(MV50AFZ1) on PGI

Hi,
I am using USER_EXIT_DOCUMENT_PREPARE for throwing error message during PGI. The error triggers properly, But after that if I press enter button, The program ends with an ABEND error 'Risk of posting several mat.documents for one delivery->long text'.
If anyone come across with this please help me.
Thanks in Adv.
Regards
Nishad

Hi,
I am not clearing any tables , there is a check where any BOL lading is entered or not, if not entered then throw the error message. I think when i debugged, in standard code they is a flag check
if wa_zaehl > 0 and        "WA-Zaehler noch Null?
     fcode(4) <> 'SIC1' and "und FCODE nicht 'Sichern'!!!
     fcode(4) <> 'LT06'.     "und FCODE nicht 'LT06'
    message a621.            "wenn nein, Abbruch!!!
endif.
in include MV50AF0F_FCODE_BEARBEITEN causes problem, This flag is set after successful creation of voucher.
I am not sure how can this be tackled.
Thanks for your reply.
Nishad

Error message "CREATE TABLE permission denied in database 'master'"

I am starting an application and I get the error message above. I do not want to creat tables in the master database - therefore I created my own database and added it to the Connection string:
DATABASE=TEST
But still the same message.

Hi,
As said you have created the new database and want create a table. Please make sure you are connecting to the right database. If you are unable to get the connection string of the newly created database, please go to the management portal and click
on the newly created database and click on dashboard to get the connection strings for the database. Then you can add the same information from where you are trying to create table with the database name to proceed further.
It seems that you are connecting to master instead of connect against your new database that you have created. Once you connect to your database you will need permission to create tables. If you are "dbmanager" role you should not have any problem
to create it.
Hope this helps you.
Girish Prajwal

Making field input editable after giving error msg from table event 01

Hi All,
I have a requirement of giving error msg and making that row or the particular field input editable by writing code in table event 01 i.e before saving any record in a z-table i have to chk some condition for a column value and if that condition fails then i have to give error msg and make that column input editable.
I have created a routine for event 01 and written the code to give error msg. But my problem is that column is not becoming input editable. Could you pls tell me how can i make that field editable?
Thanks in advance.

Hi Piyali,
Use SET PARAMETER & GET PARAMETER ID .
You will get it.
Best Regards,
Pravin

Problem with error message truncated

hi, friends iam new to informatica i need 1000 realtime scenarios please help me how can i get the scenarios for practice....

Hi,
When Iam Trying to excute the mapping Which is having Lookup Override (dynamic cache enabled) on Teradata Target tables it causing unexpected error.in lookup i have taken care by giving alias names for all colums and used same in ports.i also maintained column count in override with port columns with same data types.i also maintained same data types for incoming ports with lookup ports.
lookup overide is
Select
CASE When INDIVIDUAL.Birth_Date IS Null Then CAST('01/01/9999' AS DATE FORMAT 'MM/DD/YYYY') Else INDIVIDUAL.Birth_Date End AS Birth_Date,
CASE When INDIVIDUAL.Gender_Code IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Gender_Code) End AS Gender_Code,
CASE When INDIVIDUAL.Individual_Name_Prefix_Code IS NULL Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Name_Prefix_Code) End AS Individual_Name_Prefix_Code,
CASE When INDIVIDUAL.Individual_First_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_First_Name) End AS Individual_First_Name,
CASE When INDIVIDUAL.Individual_Middle_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Middle_Name) End AS Individual_Middle_Name,
CASE When INDIVIDUAL.Individual_Last_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Last_Name) End AS Individual_Last_Name,
CASE When INDIVIDUAL.Individual_Name_Suffix_Code IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Name_Suffix_Code) End AS Individual_Name_Suffix_Code,
CASE When PARTY.Duns_Num IS Null Then -1 Else PARTY.Duns_Num End AS Duns_Num,
CASE When PARTY.Legal_Entity_Code IS Null Then 'NULL' Else UPPER(PARTY.Legal_Entity_Code) End AS Legal_Entity_Code,
CASE When PARTY.Party_Type IS Null Then 'NULL' Else UPPER(PARTY.Party_Type) End AS Party_Type,
CASE When PARTY.SBI_Client_ID IS Null Then -1 Else PARTY.SBI_Client_ID End AS SBI_Client_ID,
CASE When PARTY.Tax_ID IS Null Then 'NULL' Else UPPER(PARTY.Tax_ID) End AS Tax_ID,
CASE When PARTY.Tax_Identifier_Type IS Null Then 'NULL' Else UPPER(PARTY.Tax_Identifier_Type) End AS Tax_Identifier_Type
from
EDW_QI_TDV.PARTY
JOIN
EDW_QI_TDV.INDIVIDUAL
ON
EDW_QI_TDV.PARTY.Party_ID=EDW_QI_TDV.INDIVIDUAL.Party_ID
It Showing error message by giving following description
TRANSF_1_1_1> CMN_1022 Database driver error...
CMN_1022 [
FnName: Prepare -- lookup override(Teradata) problem for Date Ca[ODBC Teradata Driver][Teradata RDBMS] Syntax error, expected something like '(' between the 'FORMAT' keyword and the string 'M' keyword. ]
TRANSF_1_1_1> Mon Feb 13 08:58:37 2006
TRANSF_1_1_1> CMN_1056 Error executing sql statement to fetch lookup data
CMN_1056 [SELECT FORMAT 'MM/DD/YYYY') Else INDIVIDUAL.Birth_Date End AS Birth_Date,
CASE When INDIVIDUAL.Gender_Code IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Gender_Code) End AS Gender_Code,
CASE When INDIVIDUAL.Individual_Name_Prefix_Code IS NULL Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Name_Prefix_Code) End AS Individual_Name_Prefix_Code,
CASE When INDIVIDUAL.Individual_First_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_First_Name) End AS Individual_First_Name, CASE When INDIVIDUAL.Individual_Middle_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Middle_Name) End AS Individual_Middle_Name,
CASE When INDIVIDUAL.Individual_Last_Name IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Last_Name) End AS Individual_Last_Name, CASE When INDIVIDUAL.Individual_Name_Suffix_Code IS Null Then 'NULL' Else UPPER(INDIVIDUAL.Individual_Name_Suffix_Code) End AS Individual_Name_Suffix_Code,
CASE When PARTY.Duns_Num IS Null Then -1 Else PARTY.Duns_Num End AS Duns_Num, CASE When PARTY.Party_Type IS Null Then 'NULL' Else UPPER(PARTY.Party_Type) End AS Party_Type,
CASE When PARTY.Legal_Entity_Code IS Null Then 'NULL' Else UPPER(PARTY.Legal_Entity_Code) End AS Legal_Entity_Code,
CASE When PARTY.SBI_Client_ID IS Null Then -1 Else PARTY.SBI_Client_ID End AS SBI_Client_ID, CASE When PARTY.Tax_ID IS Null Then 'NULL' Else UPPER(PARTY.Tax_ID) End AS Tax_ID,
CASE When PARTY.Tax_Identifier_Type IS Null Then 'NULL' Else UPPER(PARTY.Tax_Identifier_Type) End AS Tax_Identifier_Type from EDW_QI_TDV.PARTY JOIN EDW_QI_TDV.INDIVIDUAL ON EDW_QI_TDV.PARTY.Party_ID=EDW_QI_TDV.INDIVIDUAL.Party_ID ORDER BY Birth_Date,Gender_Code,Individual_Name_Prefix_Code,Individual_First_Name,Individual_Middle_Name,Individual_Last_Name,Individual_Name_Suffix_Code,Duns_Num,Party_Type,Legal_Entity_Code,SBI_Client_ID,Tax_ID,Tax_Identifier_Type
if replace first CASE with INDIVIDUAL.Birth_Date it excutes correctly.
when i excuted above query teradata it giving correct values.
Can anybody help regarding this.

Error ,message into table

Hi all,
i am trying to put a error message into a table...any idea how i can get this without doing move 'matnr & is in error' into my table?
thanx

Hi,
There's a few ways you could do this;
Construct your message first (i.e. combine the message text and variables into one string, then move this into the table)
or
Don't store the text, instead store the message ID, number and variable parts of the message. This has the advantage if you're running a multi-language system the log can be used by users of different languages.
Regards,
Nick

Lots of Anyconnect Error Message in Windows Event Log

Hi Community.
We have lots of Anyconnect Error Messages in the Windows Event Log. Following two examples.
Can anyone tell me why these errors appears and how do I fix them ? I already installed the newest Anyconnect on my machine.
Thanks in advance and Kind Regards Patrick
Example 1
<Provider Name="acvpnagent" />
<EventID Qualifiers="9216">2</EventID>
<Keywords>0x80000000000000</Keywords>
<EventRecordID>97564</EventRecordID>
<Channel>Cisco AnyConnect Secure Mobility Client</Channel>
- <EventData>
<Data>Function: CNetEnvironment::logProbeFailure File: .\NetEnvironment.cpp Line: 1432 Invoked Function: CHttpProbeAsync::SendProbe Return Code: -27066354 (0xFE63000E) Description: HTTP_PROBE_ASYNC_ERROR_CANNOT_CONNECT HTTP (host: 109.164.211.237)</Data>
</EventData>
Example 2
<Provider Name="acvpnagent" />
<EventID Qualifiers="9216">2</EventID>
<Keywords>0x80000000000000</Keywords>
<EventRecordID>97565</EventRecordID>
<Channel>Cisco AnyConnect Secure Mobility Client</Channel>
- <EventData>
<Data>Function: CNetEnvironment::TestAccessToSG File: .\NetEnvironment.cpp Line: 1385 Invoked Function: CNetEnvironment::analyzeHttpResponse Return Code: -28966899 (0xFE46000D) Description: NETENVIRONMENT_ERROR_PROBE_INCOMPLETE:Network Probe could not contact target</Data>
</EventData>

HI and welcome to Discussions,
in my personal opinion there is not much for you to worry about.
The 'Windows Tool for the elimination of malware' is nothing you miss as long as you have a decent Anti-Virus Software running.
The update for the IE 7 might be missing an installed IE 7, which can do by downloading it yourself from Microsofts webpage.
If you don't use the IE but something like Firefox or Opera or Safari, than don't bother with these update.
Stefan

Firefox crashes when I try to attach a file. Seems related to second problem, receive error messages when opening a pdf in adobe (which I've reinstalled twice)

Crash report:
bp-74bcae4f-7091-4121-a809-5d0a12140616 is the crash report.
I have a Toshiba.
When I open my email (gmail, school email) and try to attach a file, firefox immediately crashes and gives me two error messages. first one is a WerFault, i think. I don't know if that's relevant.
Apart from these crashes in Firefox, I am also having the same problem when trying to view or open a pdf in adobe reader, or even open adobe reader itself. It won't try to open, I just receive the error messages. I've uninstalled and reinstalled it two times now. I did this thing suggested online where you go into the control panel and look at all your plugins. Then, "repair" adobe reader - pretty sure it's just a button that says repair. that didn't do anything, of course I also could have done something wrong.
I realize this could be a problem unrelated to Firefox, but I'm doing what I can before I take my laptop in.
Please save me.

Ok two things based on the crash report and the steps you took right before the crash:
# Try to disable scrolling acceleration and restart Firefox. Does it continue to crash?
# Try Safe Mode and do the same task as above with email and the pdf [[Troubleshoot Firefox issues using Safe Mode]]
# Also pdf.js may be helpful to read pdfs in the meantime. You can change the default reader in the Preferences/Options > Application menu of Firefox.
# Try to clear out the downloads folder and update flash to version 14 (that should do it)
IF it crashes again please also provide the new crash signatures and we can take a look :-) Sorry for the crashing :-(

ITunes install problems -- no error messages

I believe my problem is unique, but if this has been brought up before, I apologize. Anyway, down to business:
A friend just bought an iPod nano and had problems installing iTunes, so I volunteered to help. Here's what happens:
1) I run the iTunes installer
2) the installer appears to be doing fine, I can even see the iTunes desktop shortcut appear
3) right before it should tell me "installation successful," the installer just disappears. The icon that was on the desktop a second ago is gone, and there is no trace of any iTunes files on the system. Here's the fun part: There are no error messages.
Also important:
The same thing happens with the iPod software updater installer.
The same things happen whether I am using the CD that came with the nano, or if I'm using freshly downloaded installers from Apple's website.
I am myself a Mac user, and am pretty clueless as to the common tips and tricks of windows, so please don't assume I know things. Any help at all would be greatly appreciated.
Thanks,
Ross

Alright, turning off the virus protection didn't do it.
Next on the list of things to try is:
1. Locate the original Windows XP Home Edition CD that came with your PC or the upgrade disc used to install Windows XP Home Edition.
2. Insert the disc into your PC and use it to begin reinstalling Windows
3. During installation, your computer will restart or you will be prompted to do so in order to continue.
4. After the computer restarts you'll see a dialog asking if you want to install Windows. Select the option to install Windows. A repair option will be presented.
5. Choose the option to repair an installation of Windows
6. After the repair is completed, your PC should restart.
7. Attempt to reinstall iTunes.
I poked at this a little bit, but after I got into the repair option, all I had was a blank command prompt, and that scares me.
Does anybody have more advice on how I can repair this installation of XP?
Thanks,
Ross
900mhz iBook G3 Mac OS X (10.4.3)

Problem handling error messages in Axis

I am consuming a web service, and all calls work fine. However, when the web service raises an error (for example I pass the wrong login), my Java application returns the following:
java.lang.ClassCastException: org.apache.axis.message.Text
The error soap packet that gets returned looks fine, but the Java (or Axis) can't seem to parse out the error message. I am doing a simple catch
catch(Exception e){
System.out.print(e.getCause());
Here is an example of a Soap message it couldn't parse:
HTTP/1.1 500 Internal Server Error
Connection: close
Date: Tue, 16 Aug 2005 19:59:50 GMT
Server: Microsoft-IIS/6.0
X-Powered-By: ASP.NET
Content-Type: text/xml
Connection: Keep-Alive
Content-Length: 366
<SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Unable to authenticate technician. Either the Technician ID or password is incorrect, or there is more than one technician with submitted credentials.</faultstring>
<detail>1030</detail>
</SOAP:Fault>
</SOAP:Body></SOAP:Envelope>
I've tried all versions of Axis and keep getting the same problem. Am I catching the wrong type of Exception? Does the SOAP packet look weird? Is there something special I need to do when creating the classes from the WSDL2Java? Some setting?
I don't know. Thanks.

The format of the SOAP Fault is valid, and can be properly deserialized using oc4j DP4 release.
Maybe you are having trouble in the processing of the detail element; the message.Text axis is complening about.
Instead of catching a generic Exception, try catching javax.xml.rpc.soap.SOAPFaultException. Then, you will have accessor for each part of the fault. Based on your sample fault, the following code:
} catch (SOAPFaultException sfe) {
System.out.println("Expected error: " + sfe.getFaultString());
outputs:
Expected error: Unable to authenticate technician. Either the Technician ID or password is incorrect, or there is more than one technician with submitted credentials.
Process exited with exit code 0.
Hope this helps,
eric

Problem on Error Message at Table Event

Similar Messages

Maybe you are looking for