Problem on idoc filter on - ALE

Hi all,
I'm working with ale, in particular with CLFMAS IDOC.
In trx. BD64 we have a filter for this idoc.
The problem is that I need to filter the field
E10CLFM-objek with a select-option and no with single values?
Is it possible?
regards,
enzo

Hi,
U can set the filter on field level in BD64.
select the model view,click on NO FILTER SET option. you will get one modal screen... click on create button. then select the field..set the filter.
Thanks
Eswar

Similar Messages

Problem in IDoc XML Port Configuration

Hi All,
I'm trying the XML port scenario as per the blog /people/stefan.grube/blog/2006/09/18/collecting-idocs-without-using-bpm
The problem is the output XML file contains all the IDocs, not the exact number what we specify in the report RSEOUT00. For example if I specify 5 as Max No.Of IDocs for that report, the output file should have only 5 IDocs and not all which are waiting in the ALE layer. Is that correct? Or am I missing any configuration?
Thanks,
Joe.

Hi Ravi,
I've used the option EDI_PATH_CREATE_DATE_TIME for the filename (Function Module Description). So it should create new files for every execution. Correct?
Actually, I had given the Max IDocs no to 3 (scheduled every hour) and executed 7 Idocs from WE19 expecting 2 files and 1 IDoc in the ALE Queue. But all 7 of them were written to the file.
Thanks,
Joe.

Problem in Idoc type

Hi Experts,
I am facing one strange issue in idocs.
I am having a scenario where for particular LS i have assigned HRMD_A06 basic type and ZHRMD_A06 extension in partner profile.
and i am trying to implement badi HRALE00OUTBOUND_IDOC.
in this badi at runtime wrong message type is getting picked up at the runtime(checked in debugging). But at the end it displays proper basic type.
so for me it is getting difficult to write logic in this badi.
Please guide is there any particular setting apart from partner profile where we assign message type to LS.

Hi,
In problem in idoc type , that below link will helpful to you.
Try this link,
http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-a-step-by-step-approach/technology/sap/18/
Regards,
Sekhar

Problem in Idoc creation in ME22N

Hi All,
We are facing a problem in Idoc creation in transaction ME22N.Our requirement is to trigger an output type and create a idoc everytime a change is made to a particular Purchase Order.
Presently however,for some vendors,when we change the plant at the item level,an Idoc is not created(with a message that the changes are not relevant to create an Idoc).Any other change to the Purchase Order like changes in quantity or price,results in successful Idoc creation.
We have also noticed that this happens only in the case of certain vendors.The Customer Info records and vendor data are all believed to be fine.
Are any other config settings required to be maintained for this?
Thanks in advance!
Regards,
Nejuma Iqbal

Hi Nejuma,
I don't think there is any problem with cofiguration settings.u r getting the idocs for some vendors .
if iam not wrong u r giving LS in the tcode(we20).The method which u r using is change pointers.As u r using standard idoc all the settings will be done.
Only settings u have to do is
1>generate partner profiles(WE20)
2>Distribute model view(BD64).
REGARDS,
Nagaraj

HR Programming : Problem with IDOC HRMD_A

Hello ,
We use Idoc HRMD_A for transferring PA records from
one R3 system (ECC5) to another R3 system (46d).
We have a problem - The Idoc doesn't check the data
inserted against the database check tables and
inserts wrong values into the target system database.
(At least that what has happened when we transferred
wrong value of MASSN in 0000 records).
Is there something we can do ?
Maybe - Some flag we can sign in order a check against check tables will be done ?
Is it a problem with this IDOC ?
Thanks .
I appreciate any help.
Nitzan S.

Consultancy note 134085 :
"Ultimately you are responsible for consistency of this data. SAP saves this data directly on the database without checking the single fields and consistency of the data records (time constraints check, writing change pointers, value check) because the consistency for an R/3 - R/3 lingage is of course ensured."
The IDOCs were intended for R3->R3 data replication, and not for data loads/interfacing. Since you're having problems, I'm guessing in addition they require the same SAP version as well.

Problem with IDoc scenario - IDocs do not aarive to XI

Hi guys!
I have a problem with IDoc->XI->File scenario. Colleagues send IDocs from R/3 and they are not in the XI. In R/3 they look like if they were correctly sent, however, I can not see them in sxmb monitor. BUT, when they send them again explicitly from R/3 (t-code WE19), they arrive...
REALLY strange...
Any suggestions?
IDX2 metadata loaded.. I think, all needed settings are done.
Question - do I need to set up LS in XI ABAP part?
Thanx, Olian!
P.

Hi Olian ,
just check if u have followed all the following steps
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2) a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name
Regards,
AshwinM

Problem sending IDOC DESADV /AFS/DELVRY03 to XI

Hi Gurus,
I have problems sending IDOCs DESADV (basic type /AFS/DELVRY03) created by function LSEND_IDOC to XI system. IDOC is correctly created by R3 system (AFS ECC 5.0) and correctly sent on the XI port (Status: Data passed to port OK - 03), but XI system doesn't receive IDOC.
If I resend the same IDOC by WE19 tcode goes ok!!
In R3 sending system nothing warnings/errors in syslog or sm58.
Any suggests? Thanks in advance.

Issue solved! It is necessary close the master idoc with a commit

Problem with Extract Filter

I have Problem with Extract Filter which was working OK until recently.
Now, when I choose the filter the screen does not come up as the extract screen as it should and no other action can be taken except to press escape which returns me to normal. working. Looks as if the extraction function has been sleected but does not show?
I am trying to use the extract on a layer. Have tried to use it on a selection also.
Anyone suggest a solution please?
Bill

Without a way to reset the tool, the only possibility seems to be to reset your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

Problem with idoc DEBMAS

Hi everybody.
We have a problem with idoc DEBMAS.
This idoc is sent from R3 to PI throw change pointers then the idoc is field only with the data modified in the master custumer.
We need the information fill it in the segment /IDOC/E1KNA1M/E1KNVVM to determine the receiver determination but this segment is not always sent.
What can be done in R3 to send always this segment.
We dont want to sent the whole data but always this segment.
Any idea???
Thanks a lot!!!!!

Hi,
As E1KNVVM segement is not mandatory, when you are triggering IDoc based on change poitner data might not populted in the E1KNVVM segment until some sales data is changed.
if you need that segement always just copy the Idoc type and make it mandaotry field.
otherwise yoy can populate some fields like STDVRS with the reruried constant and can use in your receiver determination.
Regards,
Suresh

Problem with ALV filter functionality when filtered for multiple values

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

Hi,
I am facing a problem with ALV filter functionality.
I have displayed an ALV with some columns col_A, col_B and col_C
col_A---- col_B -
col_C
1----
a -
abc
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
5----
f -
stu
From the settings link I am applying filter on column col_C and selected multiple values say 'pqr', 'xyz' and 'lmn'.
Now the ALV is showing rows only for last selection i.e . results are fetched only for value 'lmn'.
i.e. after applying the filter the ALV table looks as below:
col_A---- col_B -
col_C
3----
c -
lmn
But ideally it should be:
col_A---- col_B -
col_C
2----
b -
pqr
3----
c -
lmn
4----
d -
xyz
I could not find any OSS note related to this issue.
Please help me resolve this issue.
Thanks,
Feroz

Problem with alv filter

Hi all,
I have a problem when i filter ALV column, which has data type BELNR (FI doc No). I input in filter FI doc: 40000007 (8 char long, w/o zero ahead), then i get the empty result. The really one i want to get is a ALV line with FI doc = '40000007'.
Could u pls help me?
Thanks and regards,
Hung.

Check the field catalog for field BELNR, it should have conversion exit ALPHA. (check your report or execute [The Consistency Check|http://help.sap.com/saphelp_sm32/helpdata/EN/d6/23253963143e6ae10000000a11402f/frameset.htm])
Regards,
Raymond

IDOC filter at Field / Segment Level

Hi
Can you please tell me how to set an IDOC filter at field and segment level in short?
Thanks

Hi,
There are two filtering in IDoc.
Segment Filtering:
Segment filtering can be achieved using T/Code BD56. Here you can suppress a whole segment irrespective of data inside it . You have to give Message Type / Sender Prrtner / Receiver Partner.
Data Filtering:
Data filtering can be done in dustribution model (BD64) where you can restrict whole IDOCS or partials IDOCS to be send based on data in fields inside IDOC depending on whether the segment in which you filter is at the highest level or at a lower level. For example in MATMAS if you put a filter of E1MARCM for a particular plant , only data for this plant will go and other plants will be ignored.
Please check this link for detail information.
http://help.sap.com//saphelp_470/helpdata/EN/0b/2a611c507d11d18ee90000e8366fc2/frameset.htm
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Problem in IDOC generation

Hi Freinds,
I am facing some problem in IDOC creation . We have used MATMAS03 as basic type. And activated the chang poineter. But for some materials it is not generating IDOC.
When we saw table BDCPS with the change pointer number from BDCP it is showing some other Message type MATMASAD instead of MATMAS for the materials for wch IDOCS not sent. Can you please tell me where it is getting from this message type .

Hi,
      check with below mentioned tcodes.
      BD50 - This tcode for Activate Change Pointer for Msg Type.
      BD52 - Tcode for Activate change pointer per change.doc object or record.
    Goto BD52 -> enter the message type as 'matmas' and enter.so that u find the object type,table name and field name.
      The status of change pointer can easily be checked from   BDCPV table/view.

Concept of IDOC's and ALE

Hi Friends,
I want to learn the concept of IDOC's and ALE.I want to understand the functionality that IDOC an d ALE has. May I have the guidance from anyone who can guide me how to create IDOC's?? And also how this two terms are related to each other.
The Support will be definitely appreciated.:-)
Thanks in Advance....
Vikash Gupta.
Edited by: VIKASH GUPTA on Feb 22, 2008 1:24 PM
Edited by: VIKASH GUPTA on Feb 22, 2008 1:25 PM

hi,
OPEN DATASET
     Opens the specified file. If you do not use any additions, the file is opened for reading in binary mode. It returns SY-SUBRC = 0 if the file is opened successfully. Otherwise SY-SUBRC = 8.
Syntax
OPEN DATASET <dsn> [Additions].
Additions:
     1. FOR INPUT     ( Default ) 2. FOR OUTPUT 3. FOR APPENDING
1. OPEN DATASET <dsn> FOR INPUT.
     This statement tries to open the field in 'read/update' mode (as long as the user has write authorization).If the user does not have write authorization, the system opens the file in 'read' mode. If this fails, an error occurs.
2. OPEN DATASET <dsn> FOR OUTPUT.
     This statement tries to open the file in 'write/update' mode as long as the user has read authorization. If the authorization is missing, the system opens the file in 'write' mode. If the file already exists, its existing content is deleted. If the file does not exist, the system creates it.
3. OPEN DATASET <dsn> FOR APPENDING.
     This statement tries to open the file in 'append' mode. If the file is already open, the system moves to the end of the file. When you open a file using FOR APPENDING, attempting to read the file sets SY-SUBRC to 4. The system display the end of the file.
CLOSE DATASET
          Closes the specified file.
Syntax
     CLOSE DATASET <dsn>.
DELETE DATASET
     Deletes the file specified file. If it deletes the file successfully it returns SY-SUBRC = 0. Otherwise returns SY-SUBRC = 4. The possible reasons for failing are:
The file does not exist.
The file is a directory.
The file is a program that is currently running.
TRANSFER statement
     Used to write a record into a file.
Syntax
     TRANSFER f TO dsn.
     Transfers the data object f to a sequential file whose name is specified in dsn. dsn can be a field or a literal. You must already have opened the file. . If the specified file is not already open, TRANSFER attempts to open the file FOR OUTPUT IN BINARY MODE. If this is not possible, a runtime error occurs.f can be a field, a string, or a structure.
Hope This Helps u,
Regards,
Arunsri

Could not complete the ... command because of a problem with the filter module interface

I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
Stu

Not sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu

Problem on idoc filter on - ALE

Similar Messages

Maybe you are looking for