Problem on Installing RAC System - Oracle Linux 6.2 as Guest OS

Folks,
Hello. I just start to install 4-nodes RAC system using VMplayer 3. The host Operating System is Windows 7.
The Guest OS is Oracle Linux 6.2.
Because my computer's hard disk does not have enough space, I install the Guest OS Oracle Linux 6.2 into a external hard disk. But its speed is very slow. It has taken more than 24 hours by now, but still don't finish installing Oracle Linux 6.2.
Do any folk understand what's going on ? Is there any problem on Oracle Linux 6.2 ?

user8860348 wrote:
Folks,
Hello. I just start to install 4-nodes RAC system using VMplayer 3. The host Operating System is Windows 7.
The Guest OS is Oracle Linux 6.2.
Because my computer's hard disk does not have enough space, I install the Guest OS Oracle Linux 6.2 into a external hard disk. But its speed is very slow. It has taken more than 24 hours by now, but still don't finish installing Oracle Linux 6.2.
Do any folk understand what's going on ? Is there any problem on Oracle Linux 6.2 ?of course the problem is with Oracle Linux 6.2 & not with your VM implementation

Similar Messages

  • Problem on Installing RAC System - Oracle Linux 6.2 and 11gR2

    Folks,
    Hello. I just start to install 4-nodes RAC system using VMplayer 3. The host Operating System is Windows 7.
    The Guest OS is Oracle Linux 6.2.
    Because my computer's hard disk does not have enough space, I install the Guest OS Oracle Linux 6.2 into a external hard disk. But its speed is very slow. It has taken more than 24 hours by now, but still don't finish installing Oracle Linux 6.2.
    Do any folk understand what's going on ? Is there any problem on Oracle Linux 6.2 ?

    user8860348 wrote:
    Folks,
    Hello. I just start to install 4-nodes RAC system using VMplayer 3. The host Operating System is Windows 7.
    The Guest OS is Oracle Linux 6.2.
    Because my computer's hard disk does not have enough space, I install the Guest OS Oracle Linux 6.2 into a external hard disk. But its speed is very slow. It has taken more than 24 hours by now, but still don't finish installing Oracle Linux 6.2.
    Do any folk understand what's going on ? Is there any problem on Oracle Linux 6.2 ?of course the problem is with Oracle Linux 6.2 & not with your VM implementation

  • Installing RAC on Oracle Linux 6.3 using VMWare ESX

    Hi
    I have configured a pair of Linux servers following a guide on Oracle-base.
    Both servers have their own OS disks and they have four virtual disks that are shared between the two vm's (configured as sharable in VMWare using a separate SCSI controller to the OS disks etc.
    The /u01/app/11.2.0.3/grid/root.sh script is failing at what appears to be the part where the daemons are added to the inittab the error i get is :
    CRS-4124: Oracle High Availability Services startup failed.
    CRS-4000: Command Start failed, or completed with errors.
    ohasd failed to start: Inappropriate ioctl for device
    ohasd failed to start at /u01/app/11.2.0.3/grid/crs/install/rootcrs.pl line 443.
    I have found a few notes of the Internet suggesting disabling IPv6 (It's already disabled)
    Restarting syslog
    and removing some file in varoius tmp dirs (there were none)
    But i'm getting the feeling the issue is with the shared disk config.
    Can anyone point me to log files etc so i can troubleshoot this further?

    I guys I have run into same problem. Is there a solution for this or not.
    OS: OEL 6.3 x86_64
    ASM 2.0
    Grid Infra: 11.2.0.1
    root.sh script fails saying:
    Adding daemon to inittab
    CRS-4124: Oracle High Availability Services startup failed.
    CRS-4000: Command Start failed, or completed with errors.
    ohasd failed to start: Inappropriate ioctl for device
    ohasd failed to start: Inappropriate ioctl for device at /u01/app/oracle/product/11.2.0/grid/crs/install/roothas.pl line 296.

  • Issue to install mhVTL on Oracle Linux 5.9

    Hi Everyone
    I'm dealing with an issue to install mhVTL on Oracle Linux 5.9, my current operating system. My goal is to install Oracle Secure Backup once that mhVTL is running.
    According to the the link https://sites.google.com/site/linuxvtl2, I have followd this steps:
    1.- rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
    2.- rpm -Uvh http://www.elrepo.org/elrepo-release-5-4.el5.elrepo.noarch.rpm
    3.- rpm -Uhv http://dl.atrpms.net/el5-x86_64/atrpms/stable/atrpms-repo-5-6.el5.x86_64.rpm
    * NOTE: By default, the liblzo2_2 is not installed and my box doesn't have a repository to find it. For this reason I have installed this rpm file that let my box access a repository with the liblzo2_2 lib
    4.- yum yum install liblzo2_2
    5. sudo yum install mhvtl-utils kmod-mhvtl
    After running all this steps, I get the following message if I perform /etc/init.d/mhvtl start:
    /etc/init.d/mhvtl start
    FATAL: Module mhvtl not found.
    No kernel module loaded to feed these daemons.
    Need mhvtl kernel module version at least 0.18.11
    Did you remember to compile the 'mhvtl' kernel module ?
    Please see http://sites.google.com/site/linuxvtl2/
    According to this message, I understand, that I haven't install the kernel, so I have downloaded and uncompressed the mhvtl-2013-10-20.tgz file but with no success
    1. tar xvzf mhvtl-2013-10-20
    2. mhvtl-1.4
    3. cd kernel
    4. # make
    Output:
    make -C /lib/modules/2.6.39-400.211.3.el5uek/build SUBDIRS=/tmp/mhvtl-1.4/kernel modules
    make: *** /lib/modules/2.6.39-400.211.3.el5uek/build: No such file or directory.  Stop.
    make: *** [default] Error 2
    does someone have a tip to help me with this issue?
    Thank you in advance

    If the problem is only to install Xvfb, you can do that doing the following:
    # yum list "*xvfb*"
    Available Packages
    xorg-x11-server-Xvfb.x86_64     1.15.0-22.el6   public_ol6_latest
    # yum install xorg-x11-server-Xvfb

  • Issue while installing SOA in Oracle Linux 6

    Hi,
    I am getting below errors while installing SOA in oracle Linux 6:-
    entryPoint: entryPoint = oracle.installType.all condition = null className = null
    contextFile:/tmp/OraInstall2012-04-13_08-04-44PM/prereq/oui/agent_prereq_context.xml
    The entry point is: oracle.installType.all
    Check Name:CertifiedVersions
    Check Description:This is a prerequisite condition to test whether the Oracle software is certified on the current O/S or not.
    $$$$$DEBUG>>>>CertifiedVersions
    Expected result: One of enterprise-5.4,enterprise-4,enterprise-5,redhat-5.4,redhat-4,redhat-5,SuSE-10,SuSE-11
    Actual Result: redhat-6.2
    Check complete. The overall result of this check is: Failed <<<<
    Check Name:Packages
    Check Description:This is a prerequisite condition to test whether the packages recommended for installing the product are available on the system.
    Check complete. The overall result of this check is: Not executed <<<<
    Please help.
    Check Name:Kernel
    Check Description:This is a prerequisite condition to test whether the minimum required kernel parameters are configured.
    Check complete. The overall result of this check is: Not executed <<<<

    it is not supported
    http://www.oracle.com/technetwork/middleware/downloads/fmw-11gr1certmatrix.xls
    just filter it on wls server on which soa runs rhel 5 is the latest

  • Oracle 11gR2 RAC on Oracle Linux

    Folks, need some help in finding the correct asmlib for this linux box, have already tired one and screwed up one box, now trying on 2nd one.
    Here is info: Oracle Linux Server release 5.6   x86_64
    Please advice, I'm looking at here and tried this one, but it's not working too:
    Intel EM64T (x86_64) Architecture
    Library and Tools
        oracleasm-support-2.1.8-1.el5.x86_64.rpm
        oracleasmlib-2.0.4-1.el5.x86_64.rpm
    Link: http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html#oracleasm_rhel5_amd64
    and this is my oracleasm status on the server:
    [root@rac1 ~]# rpm -qa | grep -i oracleasm
    oracleasm-support-2.1.4-1.el5
    oracleasm-2.6.18-238.el5xen-2.0.5-1.el5
    oracleasm-2.6.18-238.el5debug-2.0.5-1.el5
    oracleasm-2.6.18-238.el5-2.0.5-1.el5
    Please assist, do I need to upgrade or ... how to fix this problem and proceed to complete the Oracle RAC setup.
    Thanks in advance.

    ASMLib is becoming "obsolete" (by system admins, not by Oracle Corp) and believe it will soon disappear.
    For RHEL6 or Oracle Linux 6, Oracle will only provide ASMLib software and updates for the UEK Kernel and the Red Hat Compatible Kernel for Oracle Linux.
    I recommend you use udev rules instead.
    Configuring Storage for Oracle Grid Infrastructure for a Cluster and Oracle RAC
    ORACLE-BASE - UDEV SCSI Rules Configuration for ASM in Oracle Linux 5 and 6

  • RAC with Oracle Linux (Using firewire drive)

    Guys
    Did anyone install RAC (10g or 11g) using Oracle Linux using firewire drive? Does Oracle linux support firewire technology?
    Please share your experience.
    Regards
    PJ

    Start here
    Installing Oracle Database 11g Release 1 on Enterprise Linux 5 (32- and 64-bit)
    http://www.oracle.com/technology/pub/articles/smiley-11gr1-install.html#kernel
    My installation:
    [root@linux3 OCFS2]# uname -a
    Linux linux3 2.6.18-8.el5 #1 SMP Tue Jun 5 23:11:13 EDT 2007 i686 i686 i386 GNU/Linux
    OCFS2
    -rw-r--r-- 1 root root 274826 May 2 17:22 ocfs2-2.6.18-8.el5-1.2.8-2.el5.i686.rpm
    -rw-r--r-- 1 root root 9123303 May 2 17:23 ocfs2-2.6.18-8.el5-debuginfo-1.2.8-2.el5.i686.rpm
    -rw-r--r-- 1 root root 1144294 May 2 17:27 ocfs2-tools-1.2.7-1.el5.i386.rpm
    Others rpms needed in my case after installation
    -rw-r--r-- 1 root root 39297 Jun 7 2007 rsh-server-0.17-37.el5.i386.rpm
    -rw-r--r-- 1 root root 126577 Jun 7 2007 xinetd-2.3.14-10.el5.i386.rpm
    lsmod
    parport 37513 2 lp,parport_pc
    snd_page_alloc 13641 2 snd_intel8x0,snd_pcm
    serio_raw 10693 0
    ohci1394 32964 1
    ieee1394 83252 2 sbp2,ohci1394 <-
    ohci is part of kernel modules !
    ./modules/2.6.18-8.el5/updates/drivers/ieee1394/sbp2.ko
    ext3 123081 1
    jbd 56553 2 ocfs2,ext3
    ehci_hcd 32845 0
    When the driver was loaded succesful looks similar to this, please verify other configuration like serialize_io
    [root@linux3 sysconfig]# dmesg | grep 1394
    ieee1394: no version for "struct_module" found: kernel tainted.
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201] MMIO=[ea125000-ea1257ff] Max Packet=[2048] IR/IT contexts=[4/8]
    ieee1394: The root node is not cycle master capable; selecting a new root node and resetting...
    ieee1394: Node added: ID:BUS[0-00:1023] GUID[0030e002e04546d5]
    ieee1394: Host added: ID:BUS[0-01:1023] GUID[001106664001995a]
    ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
    ieee1394: sbp2: Try serialize_io=0 for better performance
    scsi0 : SBP-2 IEEE-1394
    ieee1394: sbp2: Logged into SBP-2 device
    ieee1394: Node 0-00:1023: Max speed [S400] - Max payload [2048]
    and here we are!
    [root@linux3 etc]# fdisk -l
    Disk /dev/hda: 40.0 GB, 40020664320 bytes
    255 heads, 63 sectors/track, 4865 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    /dev/hda1 1 1824 14651248+ 83 Linux
    /dev/hda2 * 1959 4699 22017082+ 83 Linux
    /dev/hda3 4700 4865 1333395 82 Linux swap / Solaris
    /dev/hda4 1825 1958 1076355 82 Linux swap / Solaris
    Partition table entries are not in disk order
    Disk /dev/sda: 82.3 GB, 82348277760 bytes <= Firewire Disk
    255 heads, 63 sectors/track, 10011 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Device Boot Start End Blocks Id System
    /dev/sda1 1 5000 40162468+ 83 Linux
    /dev/sda2 5001 6217 9775552+ 83 Linux
    /dev/sda3 6218 7434 9775552+ 83 Linux
    /dev/sda4 7435 10011 20699752+ 83 Linux
    Please let me know if you need more information.
    J

  • Installing RAC on 11g - Linux 5

    I will install RAC on DB 11g in Lunux 5.
    I am evaluating hardware needed for the implementation.
    I have two server in Linux.
    Server 1 - I have My BD 11G
    Server 2 - Is my new server for RAC.
    Now. I don't understand about the shared storage.
    Is necessary buy a shared storage for RAC? because, I have revised in some notes and It mentioned that not is necessary the shared storage. that with server 1 and server 2 can make a RAC with clusterware It is correct.
    Thanks,
    Guido

    Hello,
    Welcome to the forums.
    Now. I don't understand about the shared storage.
    Is necessary buy a shared storage for RAC? because, I have revised in some notes and It mentioned that not is necessary the shared storage. that with server 1 and server 2 can make a RAC with >clusterware It is correct.You don't need to buy a new one if you can create shared disks (which will be mounted on both of your RAC nodes) on your existing available storage in your organization. You have to have shared file system.
    following note should be best for you in this regard where you don't need to buy any extra storage but you can use NFS to build your cluster. This article is for 11GR1, but it can also help you for 11GR2
    http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnLinuxUsingNFS.php
    Salman

  • Problem while installing java system application server 8.2

    Hi
    i am trying to install Java System Access Manager 8.2 on LINUX and during this process i am getting the below error.
    Valid DNS Domain Name is required.
    The DNS Domain name provided could not be validated.
    The server being installed require a valid internet name.
    Installation cannot proceed until a valid DNS Domain Name is provided.
    The above arror is at COMMON SERVER SETTINGS window.
    help me out.
    varun

    Hi,
    This is a problem with your DNS settings (or lack of), not with Sun Java System Application Server/Access Manager.
    You will need to setup DNS before installing.
    One of these articles may help you:
    http://www.aboutdebian.com/dns.htm
    http://www.troubleshooters.com/linux/dns.htm
    http://www.linux.org/docs/ldp/howto/DNS-HOWTO.html
    Hope this helps....

  • Problem in installing SOA Suite on Linux

    Hi All
    I am trying a silent install of the Oracle SOA Suite on Linus. I get the following content as the silentlog
    A configuration script needs to be run as root for the installation to be complete. Please run /opt/oracle/oracle/product/oracle_soa/root.sh as root at the end of install.
    Configuration assistant "Oracle Application Server Configuration Assistant" failed
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/sysman/ias/studio/installer/ASControlConfigAssistant
    Configuration assistant "Oracle ESB Configuration Assistant" was canceled.
    Error:*** Alert: Some of the configuration assistants failed. It is strongly recommended that you retry the configuration assistants at this time. Not successfully running any "Recommended" assistants means your system will not be correctly configured. Select the failed assistants and click the 'Retry' button to retry them. ***
    The installation of Oracle Application Server SOA Suite was successful, but some optional configuration assistants failed, were cancelled or skipped."
    and now when I try starting the opmn I get the following log content:
    java.lang.NoClassDefFoundError: javax/transaction/TransactionManager
    at java.lang.Class.getDeclaredMethods0(Native Method)
    at java.lang.Class.privateGetDeclaredMethods(Class.java:2365)
    at java.lang.Class.getMethod0(Class.java:2611)
    at java.lang.Class.getMethod(Class.java:1579)
    at oracle.classloader.util.MainClass.invoke(MainClass.java:81)
    at oracle.oc4j.loader.boot.BootStrap.main(BootStrap.java:30)
    Please help.
    Thanks

    Hi.
    No one else seems to be reporting this. Please post the full text of the error here.
    Thanks,
    Michael
    Siva wrote:
    Hi,
    When I am installing weblogic6.1 sp1 on Linux 7.1 I am getting a page full specified font not found.
    Any Ideas about it?
    Thanks In Advance
    -Siva--
    Developer Relations Engineer
    BEA Support

  • Error while installing juicer on oracle linux 6

    Hi Team,
    I have juicer installation on my plate, i installed ruby and rubygem as pre-requisite for juicer but while running below command after successful installation i am getting error stating "cannot load such file -- nokogiri/nokogiri".
    while i have installed nokogiri already.
    ~# juicer --version
    /usr/local/lib/ruby/site_ruby/2.0.0/rubygems/custom_require.rb:36:in `require': cannot load such file -- nokogiri/nokogiri (LoadError)
      from /usr/local/lib/ruby/site_ruby/2.0.0/rubygems/custom_require.rb:36:in `require'
      from /usr/local/lib/ruby/gems/2.0.0/gems/nokogiri-1.5.6/lib/nokogiri.rb:27:in `<top (required)>'
      from /usr/local/lib/ruby/site_ruby/2.0.0/rubygems/custom_require.rb:59:in `require'
      from /usr/local/lib/ruby/site_ruby/2.0.0/rubygems/custom_require.rb:59:in `rescue in require'
      from /usr/local/lib/ruby/site_ruby/2.0.0/rubygems/custom_require.rb:35:in `require'
      from /usr/local/lib/ruby/gems/2.0.0/gems/juicer-1.1.1/lib/juicer/install/base.rb:1:in `<top (required)>'
      from /usr/local/lib/ruby/site_ruby/2.0.0/rubygems/custom_require.rb:55:in `require'
      from /usr/local/lib/ruby/site_ruby/2.0.0/rubygems/custom_require.rb:55:in `require'
      from /usr/local/lib/ruby/gems/2.0.0/gems/juicer-1.1.1/lib/juicer/install/closure_compiler_installer.rb:2:in `<top (required)>'
      from /usr/local/lib/ruby/site_ruby/2.0.0/rubygems/custom_require.rb:55:in `require'
      from /usr/local/lib/ruby/site_ruby/2.0.0/rubygems/custom_require.rb:55:in `require'
      from /usr/local/lib/ruby/gems/2.0.0/gems/juicer-1.1.1/lib/juicer.rb:61:in `block in require_all_libs'
      from /usr/local/lib/ruby/gems/2.0.0/gems/juicer-1.1.1/lib/juicer.rb:61:in `each'
      from /usr/local/lib/ruby/gems/2.0.0/gems/juicer-1.1.1/lib/juicer.rb:61:in `require_all_libs'
      from /usr/local/lib/ruby/gems/2.0.0/gems/juicer-1.1.1/lib/juicer.rb:66:in `<top (required)>'
      from /usr/local/lib/ruby/site_ruby/2.0.0/rubygems/custom_require.rb:55:in `require'
      from /usr/local/lib/ruby/site_ruby/2.0.0/rubygems/custom_require.rb:55:in `require'
      from /usr/local/lib/ruby/gems/2.0.0/gems/juicer-1.1.1/bin/juicer:3:in `<top (required)>'
      from /usr/local/bin/juicer:19:in `load'
      from /usr/local/bin/juicer:19:in `<main>'
    ~]# gem list
    *** LOCAL GEMS ***
    closure-compiler (1.1.10)
    cmdparse (2.0.5)
    dev-utils (1.0.1)
    extensions (0.6.0)
    json (1.8.1)
    juicer (1.1.1)
    mini_portile (0.5.2)
    minitest (5.0.8)
    nokogiri (1.5.6, 1.5.0)
    rake (10.1.0)
    rdoc (4.0.1)
    rubyzip (0.9.9)
    I need your urgent help on this as I am totally stuck here. Thanks in advance.

    When asking a question is often helps to explain what the software is good for and how to reproduce the problem. This is not a juicer or ruby forum and there are probably not many if any user familiar with juicer in this forum. But for what it's worth, the following works in Oracle Linux 6.3 x86 and probably other release versions:
    curl -L https://get.rvm.io | bash -s stable --ruby
    source /usr/local/rvm/scripts/rvm
    ruby --version
    ruby 2.0.0p247 (2013-06-27 revision 41674) [x86_64-linux]
    gem install --verbose juicer
    juicer --version
    juicer 1.1.1
    juicer help
    Usage: juicer [global options] COMMAND [options] [ARGS]
    Available commands:
        help            Provide help for individual commands
        install         Install a third party library
        list            Lists all dependencies for all input files/patterns
        merge           Combines and minifies CSS and JavaScript files
        verify          Verifies that the given JavaScript/CSS file is problem free
        version         Show the version of the program
    Global options:
        -v, --verbose                    Be verbose when outputting info
        -q, --quiet                      Only log warnings and errors
        -h, --help                       Show help
            --version                    Show the version of the program
    P.S. nokogiri requires Ruby version >= 1.9.2.

  • Missing packages while installing 11gr2 on oracle linux 6 os

    hi,
    i am installing Oracle 11gR2 on oracle Linux 6 OS via a vmware.
    i bum into this problem of not able to install the required packages:
    glibc-2.3.4-2.41
    compat-libstdc++-33-3.2.3 (64bit)
    elfutils-libelf-devel-0.97
    libaio-devel-0.3.105
    libgcc-3.4.6
    libstdc++-3.4.6
    unixODBC-2.2.11 (64bit)
    unixODBC-deve-2.2.11
    pdksh-5.2.14
    i try to rpm -qa | grep <packges name>
    [root@rcat lib64]# rpm -qa | grep glibc
    glibc-devel-2.12-1.132.el6.x86_64
    glibc-common-2.12-1.132.el6.x86_64
    glibc-2.12-1.132.el6.x86_64
    glibc-headers-2.12-1.132.el6.x86_64
    [root@rcat lib64]# rpm -qa | grep libaio
    libaio-0.3.107-10.el6.x86_64
    libaio-devel-0.3.107-10.el6.i686
    libaio-devel-0.3.107-10.el6.x86_64
    [root@rcat lib64]# rpm -qa | grep compat-libstdc++
    [root@rcat lib64]# rpm -qa | grep elfutils
    elfutils-libs-0.152-1.el6.x86_64
    elfutils-0.152-1.el6.x86_64
    elfutils-libelf-0.152-1.el6.x86_64
    [root@rcat lib64]# rpm -qa | grep libaio-devel
    libaio-devel-0.3.107-10.el6.i686
    libaio-devel-0.3.107-10.el6.x86_64
    [root@rcat lib64]# rpm -qa | grep libgcc
    libgcc-4.4.7-4.el6.x86_64
    [root@rcat lib64]# rpm -qa | grep libstdc
    libstdc++-4.4.7-4.el6.x86_64
    libstdc++-devel-4.4.7-4.el6.x86_64
    [root@rcat lib64]# rpm -qa | grep unixODBC
    [root@rcat lib64]# rpm -qa | grep pdksh
    it seem like the packages i have on my oracle linux 6 os is of higher version compared to what oracle 11gR2 database installer is asking for which is of lower version.
    i can't seem to find/download those packages individually from any website.
    I am trying to download the oracle linux 5 os iso with the hope i can find the lower version packages from the iso disc.
    Appreciate if there is any help here. pointing to any website i can quickly download the packages cos trying to download the iso takes me more then 13 hour!.

    >>it seem like the packages i have on my oracle linux 6 os is of higher version compared to what oracle 11gR2 database installer is asking for which is of lower version.
    i can't seem to find/download those packages individually from any website.
    I am trying to download the oracle linux 5 os iso with the hope i can find the lower version packages from the iso disc.
    You should find all rpms and their right version (as required by installer) onto linux 6 iso.
    For some rpms the installer can like higher versions but not for all. For some rpms installer requires the exact version.
    HTH
    Pradeep

  • Version error installing SOA on Oracle Linux

    Hi,
    I'm trying to install Oracle SOA Suite 10g (10.1.3.1.0, soa_linux_x86_101310_disk1.cpio) on Oracle Linux 5, but I'm getting the following error:
    Checking operating system version: must be redhat-Red Hat Enterprise Linux AS rele
    ase 3, redhat-Red Hat Enterprise Linux AS release 4, redhat-Red Hat Enterprise Lin
    ux ES release 3, redhat-Red Hat Enterprise Linux ES release 4 or SuSE-9
    Failed <<<<
    Is Oracle Linux not compatible with SOA? My understanding is that Oracle Linux 5 is basically Redhat 4:
    cat /proc/version
    Linux version 2.6.18-53.el5 ([email protected]) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Sat Nov 10 18:24:52 EST 2007.
    Thanks,
    Yi

    You require a patch 6339508 which provides replacement pre-requisite tests. To use it you need to add two parameters to the runInstaller command as shown below.
    ./runInstaller PREREQ_CONFIG_LOCATION=<PATCH_LOC>/prereq –paramFile <PATCH_LOC>/oraparam.ini
    PATCH_LOC is the location where you unzipped the 6339508 patch. With these new parameters the installer correctly recognizes Oracle Enterprise Linux as a supported platform. Note that OEL needs some specific patches when used with SOA Suite and these need to be installed prior to running the installer. Check the documentation for details.
    cheers
    James

  • How to Install Xvfb on oracle linux 6.5

    Dear,
    I wanted to run Autovue on oracle linux, so that needs the first run Xvfb.
    How can I install and run Xvfb o oracle Linux 6.5?
    Best regards,
    Saeed.

    If the problem is only to install Xvfb, you can do that doing the following:
    # yum list "*xvfb*"
    Available Packages
    xorg-x11-server-Xvfb.x86_64     1.15.0-22.el6   public_ol6_latest
    # yum install xorg-x11-server-Xvfb

  • Installing 11gr2 in Oracle Linux 6.3 (./runInstaller - permission denied)

    Whenever i try to run ./runInstaller in terminal,
    i get the error as Permission denied ,
    While installing oracle linux 6.3 , i have given root password and in terminal ,
    even though being a root user, can't install the Oracle Database 11gr2.
    I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
    Pls help me anyone, as am a beginner in the field of Linux environment.
    Thanks...
    Edited by: flixblixclix on Jan 1, 2013 10:51 PM

    979352 wrote:
    Whenever i try to run ./runInstaller in terminal,
    i get the error as Permission denied ,
    While installing oracle linux 6.3 , i have given root password and in terminal , trying to install as root is a clear indication that you either haven't read the Installation Guide, or you are choosing to ignore it. If you missed or chose to ignore the point that the installation should not be done as root, who knows what else you missed or chose to ignore.
    From Oracle® Database Installation Guide
    11g Release 2 (11.2) for Linux ( http://docs.oracle.com/cd/E11882_01/install.112/e24321/inst_task.htm#BABJGGJH)
    4.5.1 Running Oracle Universal Installer
    For any type of installation process, start Oracle Universal Installer and install the software, as follows:
    Logon as the Oracle software owner user (typically, oracle) to the computer on which you want to install Oracle components.
    even though being a root user, can't install the Oracle Database 11gr2.
    I know, there are many tutorials about installing 11gr2, i followed almost all from different sites, but stuck with Permission denied.
    Pls help me anyone, as am a beginner in the field of Linux environment. Read the Installation Guide. Read all of it. Believe it.
    >
    Thanks...Edited by: EdStevens on Jan 1, 2013 8:24 AM

Maybe you are looking for