Problem on LSMW for STPO

Dear all,
I had try upload STPO by LSMW with PO standard object
( Object: 0085, Method: 0001, Program Name: RM06EE10, Program Type: Direct Input),
but 2 error message is come out at the last stage - Start Direct Input Program :
message 24 - "Order type UB is not allowed"
message 6 - "Item category U not allowed".
Do any one has any idea on it ? I can't found out any issue from OSS.
Thanks !
Regards,
Eric

HI Eric
I hope this is relating to Tcode Me21n in R3 and you want to upload STPOs in R3.
Actually me21n does not support LSMw for some reason.
kindly go through this post .
Re: LSMW For T-code ME21N
we tried in my last project but could not suceed and ultimately we did though program using BAPI.
Regards,
Nimish sheth
pls rewards points for helpful answers.

Similar Messages

Scheduling problem in LSMW for Sales Order

I am doing LSMW for Sales Order using the BAPI method.
I am able to upload the item details along with their quantities also but the problem that I am now facing is the scheduling problem.I am unable to schedule the item quantities, only the last quantity passed is taken as the final quantity and the consolidated quantity is also getting ignored.
I am using E1BPSCHDL structure, in this structure I am mapping Itm_number , req_date and req_qty(scheduled qty).....
in the structure E1BPSCHDLX, the same fields are mapped as 'X'.
in the structure E1BPSDITM, I am mapping the item info along with the consolidated qty(TARGET_QTY), but this is getting ignored and the last scheduled qty is taken as the final consolidated qty and the rest scheduled qty data is getting rejected.
Please do help... I dont know why this problem is coming... tried n number of alternatives but of no hope... do try to help me
with regards,
Daya.

Check the format of your date and check the format expected.
sometimes you can have diff like YYYYMMDD, MM.DD.YYYY,...
Look at the converted data.
Hope this helps,
Erwan

A small logical problem in LSMW for MM01...

I need to create a LSMW for MM01 transaction, wherein I have to check the initial four
digits of the material as 'ORCL'. If initial four digits of the
incoming material are 'ORCL', then create this material as it is.
Else replace these four digits with 'SAPM' (for sap material) while
creating this material.
This will differentiate between materials coming from Oracle and non
oracle system.
I know that I need to create a new rule in the step 5 of LSMW: "Maintain Field Mapping and Conversion Rules", under the ABAP heading.
But, how should the rule proceed??
Pls help me out!!!

awesome! thnks a lot naimesh.... you are tooo goood!
Can you please help me again...??
Now, I need to replace the records which are not 'ORCLXXX' with SAPXXX format. For example, say a record has the material number as ORCL007. This will pass on and created as ORCL007. If a record has the material number as MMMM007, this should be converted to SAPM007.
Should I use fieldsymbols for this, or just replace the strings??
This will be the last, I promise....

Problem in LSMW for Routing. Urgent

Hello all,
I am doing LSMW for Routing. The object attributes are
Object 0170 Routing
Method 0001 Batch inpu
Program name RCPTRA01
Program type B Batch input
The material number MATNR and the plant WERKS is not getting filled up in the initial screen (CA01 tcode). The fields are RC27M-MATNR and RC27M-WERKS. But all other fields are getting filled up.
I have given the structure relation to BI001, BIMPL, BIPKO, BIPFL, BIPPO.
When I checked the program RCPTRA01, I could able to find out the below code which actually passes space to the above fields.
Material
BDC_TAB-FNAM = 'RC27M-MATNR'.
BDC_TAB-FVAL = SPACE.
APPEND BDC_TAB.
CLEAR BDC_TAB.
Werk
BDC_TAB-FNAM = 'RC27M-WERKS'.
BDC_TAB-FVAL = SPACE.
APPEND BDC_TAB.
CLEAR BDC_TAB.
How to go about this.
Awaiting your reply,
Thanks in advance,
Balaji

Hi,
Im trying to load long text for Operations using the program RCPTRA01 however the screen sequence dosn't even enter the long text area, is there is anything specific that i would have to do to make sure the long text gets in

Problem in lsmw for purchase order (direct input)

hi friends,
i am trying to upload po using lsmw by direct input method.
only problem is it is not taking delivery date properly.
at the end error message is 'plz enter valid delivery date'.
can any one tell me why it is happning.
thanks
sonu

Check the format of your date and check the format expected.
sometimes you can have diff like YYYYMMDD, MM.DD.YYYY,...
Look at the converted data.
Hope this helps,
Erwan

Problem with LSMW for tcode BP

HI
I am trying to update some data from flat file to the CRM using lsmw.every step is complted and the batch in put is completed sucess fully but after seeing the BP i cannot find the data

Hi
go to settings and idoc In bound processing, have you completed this also?
Reward if helpful
Venkat

Error in the LSMW for vendor master using standard batch/direct input

I am facing the problem in the LSMW for the Vendor master data. The vendor is initially created for the company code 350 by using LSMW. NOw when I try to uploasd the same vendor using the same LSMW for the company code 450 then I get the error in the Bach input creation as follows:
Batch Input Interface for Vendors
FB012                    Session 1 : Special character for 'empty field' is /
FB007                    Session 1 session name VNDR_CREATE_ was opened
FB104                    Trans. 2 XK01 : Acct already exists; general area not being processed
FB125                    ... Data in table BLFA1 cannot be processed
FB016                    ... Last header record ...
FB014                    ... BLF00-STYPE 1
FB014                    ... BLF00-TCODE XK01
FB014                    ... BLF00-LIFNR 300951
FB014                    ... BLF00-BUKRS 402
FB014                    ... BLF00-EKORG /
FB014                    ... BLF00-KTOKK VEND
FB017                    ... Last data record ...
FB014                    ... BLFA1-STYPE 2
FB014                    ... BLFA1-TBNAM BLFA1
FB014                    ... BLFA1-ANRED /
FB014                    ... BLFA1-NAME1 SAVOIE AUTOMATISME DEXIS
This is because when we use XK01 to create the vendor by using the

Please check this answered link:
Re: LSMW for Vendor Master
LSMW Upload vendor master data
Edited by: Afshad Irani on May 5, 2010 12:42 PM

Creation of lsmw for updation of position and pers area

Hi friends,
I am tried many time to update position and personnel area through lsmw for all employees ,at time of recording its coming.But once compltion of lsmw preparation i am uploaded my inputs through tabfile that time its updating only personnel number and infotype and its asking the save the action screen (At the same time its showing one popup below screen like there is no recording for mp000000).Can you tell any one there whats the problem.At the same time is it possible to upload the position and personnel area through lsmw.
Thanks,
arjun.

Hi Arjun
Are you performing a hiring actions, if you are performing a hiring action, when you start with LSMW, the recording should be correct with hire date or start date, personnel number, reason for hire, position number, personal area, employee group and subgroup.
The source field you specific should contain the required field name, type, length and field discription. The field mapping should be done perfectly and assign the specified file in txt format and try to upload.
If you are facing any problem, let me know. I think I can help you
Regards
Santhosh.S

LSMW FOR P.O UPLOAD

Hi Guys,
I am using LSMW for uploading the Purchase order. This I could able to do without any problem for single line item P.O.
This was done by recordning method.
Can some one explain how to upload purchase order for more that one line item.
Thanks,
Dhanu
Edited by: Dhananjayappa E on Jul 30, 2008 4:40 PM
Edited by: Dhananjayappa E on Jul 30, 2008 4:40 PM

It is Somewhat Difficult to Contol Screen Variables While Using LSMW. If the Data is Bulk Use BDC with the Help of Abaper.
http://aspalliance.com/1130_Batch_Data_Communication_BDC_in_SAP_R3
http://abap-gallery.blogspot.com/2007/08/bdc-batch-data-communication-tutorial.html
http://it.toolbox.com/wiki//index.php/Bdc
Regards,
Ashok

Need help with LSMW for ME23N

Hey Guys,
I have this problem where i need to do a recording for LSMW for ME23N. This are the steps i took:
1. Enter ME23N
2. Click on the Change Button (i can't enter me22n directly to edit when its running a batch)
3. Click on the Drop down List
4. Key in a different Item number
5. Press enter
6. Select the delivery TAB
7. Check the Delivery completed button
8. Save.
When i run the batch, the problem comes at step 4. I have a batch file with the following format:
05 4500120382
The list box, cannot read the number 05. Is there anyway to go around this?
Thank you

hi,
Check it, may be usefull for you:
Here is the link explaining step by step LSMW
/people/hema.rao/blog/2006/09/14/lsmw--step-by-step
http://www.scmexpertonline.com/downloads/SCM_LSMW_StepsOnWeb.doc
Regards
Priyanka.P

LSMW for Special GL transaction

Hi,
I am doing a LSMW for upload open items for special GL transaction (TYPE W) with a Batch input. I couldn't do with the standard method (RFBIBL00) because the dynpro for SGL type W is very different. The problem is that the posting is not passing to the second position. It reads all the information but in the step 'convert data' only reads the first posittion (the one of the SGL). In the steps 'FIeld Mapping and conversiont' I can only assing the information of the SGL's dynpro.
Any idea?
Thanks,
Cecilia

For sugestion, define 'W' as default value in your recording and remove this field from upload sheet. If you got more than one entries like that execute in separated sheets.
If the situation remains contact a SAP or presence support to analyse your system.
Good luck and best regards

LSMW for changing user status on work order(IW32)

Hi All,
I have created a LSMW for changing user status on work order using transaction IW32. It does not change the status when i run the LSMW. In the recording for the LSMW, i select the radio button on the user status i want to select.
When i run the LSMW in the foreground, it does everything except select the correct status.
Is there a way to fix this or is it a problem with LSMW. I'm using ECC6
Kind Regards
Emanuel

Hi ,
I am not sure whether it would work with LSMW but if your on ECC 6.00 ,Enhacement Pack 3 then you have BADIs which allow you to make collective status changes in IW38 .The below are those BADIs :-
BADI_EAM_RIAUFK20_FCODE_CUS1 :Implement Customer Function Code in Order List
BADI_EAM_RIAUFK20_FCODE_SAP1 :Implement SAP Function Code in Order List
Else if your on lower version then write up a batch programme which checks the PM Order types with specific status and sets user status using FM STATUS_CHANGE_EXTERN[This is used to set or delete User Status] in SE37 ..
regrds
pushpa

Lsmw for me21n transaction

Hi ,
I had a problem while doing lsmw for me21n transaction. My problem is how to handle table control in that. can any one send some screen shots or link, how to do table control
Thanks & Regards,
sreehari
Moderator Message: Search for available information on the web before posting
Edited by: kishan P on Sep 3, 2010 9:51 AM

Hi ,
I had a problem while doing lsmw for me21n transaction. My problem is how to handle table control in that. can any one send some screen shots or link, how to do table control
Thanks & Regards,
sreehari
Moderator Message: Search for available information on the web before posting
Edited by: kishan P on Sep 3, 2010 9:51 AM

Problem in bdc for MB01

We have developed a bdc for t-code MB01. We want to genreate material documents in background. For some reasons we are not in a position to use BAPI for MIGO (as we are not able to input data of two fields). we are on ECC 6.0
BDC for MB01 is working fine. Only thing is we want to input "Goods recipient" also in this bdc. But we are not able to find this field in MB01. is it possible to get goods recipient also in MB01? how to do it?
Also is there any problem in using bdc for MB01 instead of MIGO?

Hello,
try LSMW with Object 0110 - Material movement.
You can develop standard LSMW for this object in half an hour.
Andrzej

Upload LSMW for Grant Master and Business Partner

Hi,
Does anyone have LSMW' for uploading business partners and Grants
A basic one can be shared. I will build up on that in terms of adding fields etc...
Regards
Anish

Hi,
As both the Grant master and the business partner have tables in several screens, using LSMW is not recommended.
For the grant master record I'd use BAPI_0035_CREATE - Works better and faster.
LSMW cannot support complicated scenarios, such as adding an alternating number of sponsored classes per grant (for example - one grant has 3 classes and another has 4 classes). The BAPI can solve such problems.
Best regards,
Shahaf Yaari

Problem on LSMW for STPO

Similar Messages

Maybe you are looking for