Problem On Netra 210 Network
Hi All,
Why does my sun netra 210 cannot passed the network packet over HP Procurve 3500yl Core Switch?
But, no problem occured when i use Cisco Catalyst Core Switch.
Is there any incompability between Sun and Hp Procurve, or i need to install new patches? Please help me.
Thankyou in advance
Dear sir,
i already tried that,
i also have try to use another port on the switch.
The strange thing is, when i use laptop (with the same ipadress as the Sun), other computer from another segment can ping, But, when i returned the ipadress to the Sun server, they cannot ping (RTO).
Similar Messages
-
Problem On Sun Netra 210 Network
Hi All,
Why does my sun netra 210 cannot passed the network packet over HP Procurve 3500yl Core Switch?
But, no problem occured when i use Cisco Catalyst Core Switch.
Is there any incompability between Sun and Hp Procurve, or i need to install new patches? Please help me.
Thankyou in advanceDear sir,
i already tried that,
i also have try to use another port on the switch.
The strange thing is, when i use laptop (with the same ipadress as the Sun), other computer from another segment can ping, But, when i returned the ipadress to the Sun server, they cannot ping (RTO). -
Netra 210 - problem with powering on (SEEPROM access failed)
Hi,
Almost everyday, when I for the first time power on the NETRA-210 server by "poweron" command or by pressing button, the server says:
Configuring system memory & CPU(s)
ERROR: motherboard SEEPROM access failed
System configuration failed, powering off
The second try of powering on is successfull, no error is displayed, system boots with .
System is updated with latest patches and the OBP version is 4.22.33 (patch 121683-06), but it does not solve the problem.
Best regards.You do know that JavaScript is a different language that Java, right?
-
I`m new to Sun.
We have Sun Sollaris 10 on netra 210 with two interfaces, one is connected to Avaya PBX (link is fixed to 10Mbps HalfDuplex, because this hardware on Avaya PBX is old card and it does not support any other speed) and second interface is connected to LAN.
Till couple of days ago everything was working fine and without any errors in log files. Couple of days ago someone accidentally turned power off for all our equipment except for PBX.
When system had rebooted, interface bge0 on Sun is getting down and back up every few hour.
this is what we have in /var/adm/messages
Nov 24 00:20:04 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link down
Nov 24 00:20:24 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link up 10
Mbps Half-Duplex
Nov 24 01:20:15 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link down
Nov 24 01:20:35 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link up 10
Mbps Half-Duplex
Nov 24 02:49:25 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link down
Nov 24 02:49:45 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link up 10
Mbps Half-Duplex
can you help, I do not know what is wrong. I change cables, and also equipment on Avaya PBX, and every time is the same resultSystem was set to autonegotiation. When I set system to 10 Mbps halfduplex with:
ndd -set /dev/bge0 adv_10hdx_cap 1
ndd -set /dev/bge0 adv_10fdx_cap 0
ndd -set /dev/bge0 adv_100hdx_cap 0
ndd -set /dev/bge0 adv_100fdx_cap 0
ndd -set /dev/bge0 adv_1000hdx_cap 0
ndd -set /dev/bge0 adv_1000fdx_cap 0
ndd -set /dev/bge0 adv_autoneg_cao 0
link went down and did not come up until I set it back to autonegotiation.
I also set bge.cong file if system would reboot with:
name="bge" parent="/pci@1f,700000" unit-address="2"
adv_autoneg_cap=0 adv_1000fdx_cap=0 adv_1000hdx_cap=0
adv_100fdx_cap=0 adv_100hdx_cap=0 adv_10fdx_cap=0 adv_10hdx_cap=1;
And after I rebooted the system, link was stil down -
When I reboot my netra 210 is hangs at the console login prompt for 11 minutes before it contiues to boot to the GUI login screen.
We inheritied a system that hung for at least 5 minutes in a similar fashion - it was looking for a device that it was told was there but was no longer physically present. Once we reconfigured it, the problem was resolved. Perhaps your problem is similar - I'm assuming once it boots to the GUI, everything else works fine?
-
Hi,
When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
"The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
If this problem persists, contact your network administrator."
It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
But it is working in Firefox.
Please help me on how to fix this issue.
Thanks.Hi Htet,
Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
Thanks
Daniel Yang
TechNet Community Support -
After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ
Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes -
When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?
Where is everyone???? Does anyone have an answer???
Allik1 -
Problem to detect Wifi networks. I restored without back up and it doesn't work. suggestions?
I detected one time networks with the trick (air plane mode on, power off, sim card out, power on, sim card in, air plane mode off...). since nothing. I think it's a software problem. suggestions ?
-
Problems printing in wlan network
hi
i have a strange problem. running a wireless network in my office, with an old lexmark optra S 1855 hooked up as the printer. we're all using macs, all running osx leopard or panther. i am the only one that can print either using the wireless network or ethernet. the others can't print using the wireless network, they have to use ethernet cables to print.
any ideas??Can you please describe your network a little more. Example - do you have a router and then added a second one (like an Airport Base/Express) for wireless?
-
Problems reading other wireless network.
Hello everyone,
I am writing this message because in the last weeks I have been having a problem with my wireless network on my macbook. Every time that I open the computer it reads another network first and not the one that is mine. My other computer, ipad and ipod touch are reading the network that I own, but this macbook is not reading it first. I always have to go to network settings and changes it.
Any advice or help in that regard? I will appreciate it.
Thank you.
LuisHi
Go into System Preferences... > Network
Select AirPort from the list on the left and then your usual Location
Click Advanced and select the AirPort tab
Delete ALL networks EXCEPT your own from the list of nearby networks
Click on OK, Apply, etc
Bob -
I had no problem connecting to my network and now all of a sudden I can't connect my iPad. Instead of prompting me for a password it comes back and says unable to join the network ("name") and then the option is Dismiss. Anyone else have that problem? I've gone thru all my settings and can't seem to find a way to log into my network. Don't get the option to put in my password. It just give me the name of my network and option of dismiss instead of password.
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone
What brand/model USB drive? Is it bus or AC powered?
On Mail...
First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
Users/YourUserName/Library/Mail
Users/YourUserName/Library/Mail Downloads
(Could be a different folder here if you chose such in Mail Prefs)
Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
/Users/YourUserName/Library/Preferences/com.apple.mail.plist -
I was trying to download a movie and then it said there was a problem connecting to the network , check your settings and try again (5) . I tried all the various suggestions already in the discussions including restore, restart, unplugging everything etc - still doesnt work. Any other new ideas? I bought my apple tv just a few days ago and am really annoyed its already run into problems
Reboot router, make sure it's up to date. If on wifi try ethernet. Make sure DNS is set to automatic (settings - general - network).
-
Emails are l "stuck" in my Apple Mail Outbox. I have deleted the account and reinstalled but still have the problem. Apple's "Network Diagnostics" report that it cannot connect to the SMPT server. TalkTalk (Tiscali) say there is no problem with their server because I have checked and can send emails with their webmail.
No that is not it:
Open Mail>Preferences>Accounts, the first page has this on it
If you click on the server name in the box (gmail in your case I assume) it opens and reveals this:
If you select Edit SMTP Server list you get this:
Post it here and, select the Advanced Tab (which looks like this)
Post this page as well.
Maybe you are looking for
-
How do I find the license for a deactivated product
I deactivated adobe acrobat 9 and need the license code to reactivate. How do i find it?
-
How to create a more general install package for an AIR app?
Hi, I have been using the ADT to compile an exe of my AIR app along with some other files I want to distribute. Problem is, I would like to do more general install actions (e.g. copy a bunch of files to the users Documents directory, copy a file to t
-
Pavilion Slimline s5212y desktop, Windows 7 I can't find info on how to control lower icon tray depth so that I can see and click on various program install, PDF print and other 'print', 'next', 'finish', etc. commands.
-
Finding and Deleting Duplicates Automatically
Hi, I just imported a bunch of photos from various old iphoto libraries I had on external hard drives. I now have tons of duplicate photos, and even many duplicate projects. It is absolute chaos. Is there a tool or plug-in that could automatically cl
-
How to change sybase sql default port
Hi Experts, Is there any option to change the sybase sql default port ? Here i want to change the port number because we can't start two SAP instances at the same time on the same server? Kindly advice Regards Praveen