Problem on procedure import wizard

I have a very strange problem on importing procedure on OWB.
The installed software is:
Oracle DB 10g
Oracle Warehouse Builder 10.2.0.4
on Windows Vista.
The problem is that within the procedure import wizard I cannot view all of the procedures that are phisically stored on the repository.
If I create a procedure with any editor like TOAD, this new procedure is not available in the list of the wizard.
For all of the others object this problem doesn't exist, so I can import all the tables, functions, sequence.. stored on the repository.
About the deploy I have no problem on any object. So I can deploy tables,function,PROCEDUREs and so on created on the Design Center.
The only problem I have is about importing procedures.
Can u help me?

This might stupid buit still worth saying it:
In Owb client:
Under your repository ==> Databases ==> Oracle --> EMP( Schema which is registered and there is an entry in connection explorer for this schema)
Under your repository ==> Databases ==> Oracle --> HR( Schema which is registered and there is an entry in connection explorer for this schema)
when you click on transformations ==> Import within EMP Schema, you will be able to view all procedures which are in EMP schema and not procedures under HR schema.
Trust all your procedures are in one schema dn the schema where all this exists is registered in your connection explorer i.e it points to the correct location like DEV or Test or Prod etc.
If all of this is correct then there is no reason why the procedures should not be visible.

Similar Messages

Problem with the importing wizard

Hei,
I have a dll which I want to import to the Labview project. So, I decided ti use the import wizard, but when parsing the header file, Labview freezes. I am using a couple of structures (3) and a handle. I have also read that the wizard has problems when dealing with complex data. What would be best solution for adding it to the project? To in a way "unbundle" the struct and then create a many simple variables and then parsed to dll. (This would be a pain)
How to deal with the handle or will wizard easy understand that?
I am really looking for a painless solution
thanks for the help

Can you post the header file for the DLL?
Through a process of trial and error you could determine which functions causes problems with the wizard (comment out half the functions, attempt to import, repeat) and then manually create the LabVIEW VIs for the troublesome ones. If there aren't too many functions, you could do it all by hand, which isn't that hard if you have some understanding of C (and if you don't, you'll undoubtedly have other problems when the wizard doesn't do the right thing).

Information sources for Import Wizard

Post Author: Geert
CA Forum: Migration to XI R2
Which input is used by the Import Wizard to migrate Personal - and Inbox documents from 6.5 to BOXIR2?
We have noticed that for some users, not all the Personal documents are migrated from 6.5 to BOXIR2. We have done a test on a Non-PRD environment. In PRD we have to migrate +80.000 documents for +10.000 users. I'm trying to find out why, to make an impact analysis.
Does the Import Wizard use: - only the 00000xyz.wid-files? - Profile.txt? - Index.dat? - Index? - Attribut.txt? - the Repository?
Does anyone recommend to copy the filestore on the server where the Import Wizard is installed? When I copy the filestore to a separate location, can the Impot Wizard make the link with the repository (if needed)?

Post Author: Geert
CA Forum: Migration to XI R2
- We have had a consultant to do an assessment of our environment. He's a former BO-employee and has the best experience I have ever seen. So, we are not operating on our own.
- We use BO since 1994 and BO is a standard reporting tool at our site. We have +5000 user who use BusinessObjects Full Client, who have created 50.000 documents on the Network. This is on average 10 docs per person. We have +5000 users who use Webi since 2005. They have created 40.000 docs in 3 years. So, this makes on average 8 documents per user over a period of 3 years. I think this is not too much... With a lot of users, you get a lot of documents
- If we do a cleanup (Delete) for the personal documents in Webi, the content of the 'index.dat' and the 'Attribut.txt' is not in sync with the actual files in the storage-directory. How can we solve this? Can a cleanup create a possible source of problems with the Import Wizard? To avoid this,we choose to migrate all the documents. Doing this, we ' follow' the rules of BO and can contact BOSupport in case of problems. We have allready introduced # cases for specific problems. The only thing we are missing is the 'general rules' the Import Wizard uses for the migration.
- We have 624 universes. The universes point for 75% to an ODS-layer which covers 80% of the operational systems. A lot of 'operational reporting' is done in BO. We use the SDK of Designer to create universes. This enables us to create a universe of +/-500 -1000 objects in, on average, 3 days.
-> I come back to my question: does anyone have any idea what the Import Wizard needs to migrate Personal Documents from Webi 6.5 to BOXI?

Import Excel with Import Wizard / Problem during the import of "Actual Work" column

Hello,
I am trying to import an Excel File (*.xlsx) to Project Server 2013 through Project Professional 2013 and Import Wizard.
I am having trouble when I try to include the column "Actual Work". After selecting the columnsmapping I am getting a strange error message saying that "The File cannot be oppened","Make sure, that the Filename and Path is right"
and some other strange messages concerning compatibility, although I am using the same File, which works perfectly without the "Actual Work" column.
I have tried as well with csv and the outcome was the same.
Any help is welcome!
Thank you in advance,
Ioannis

Which DW are you using - DMX on Mac? It didn't have that
option. This is
not an Educational version issue - it's a Mac issue.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Terry_Straehley" <[email protected]> wrote
in message
news:fm85u9$5ec$[email protected]..
> From a 11/06 post
> <<Hi, My Dreamweaver MX Education Version does NOT
have the Import to
> Excel
> option. I am using "Excel 2003 (11.6560.6568) SP2, Part
of Microsoft
> Office
> Professional Edition 2003". If I start with a blank page
in Dreamweaver,
> click
> on File, Import, I only have the options "XML into
Template", "Word HTML,
> and
> "Tabular Data". Does anyone know why I don't have the
"Import Excel" >>
>
> This was not answered in the thread I copied it from. I
have the same
> problem.
> Can some one answer the question?
>

Import wizard has hanged for an hour; browser doesn't start

1. I am trying to install Firefox. For the past hour it has been hanged at this point:
Import Wizard
Importing...
The following items are currently being imported...
Internet Options
Cookies
Browsing History
Favorites
[<Back][Next>][Cancel]
All 3 buttons are grayed out, disabled.
2. Internet Explorer is still working even though Firefox already set Firefox to be my default browser.
In Internet Explorer I tried to view http://www.mozilla.org
But Mozilla's site redirected Internet Explorer to http://www.mozilla.jp
At the bottom of http://www.mozilla.jp, I clicked on words "mozilla.org (グローバルサイト)".
Those words are a link to http://www.mozilla.org
But Mozilla's site redirected Internet Explorer to http://www.mozilla.jp
Now I'm stuck in an infinite loop too.
Every time I click on "mozilla.org (グローバルサイト)",
it repeatedly displays http://www.mozilla.jp with words at the bottom "mozilla.org (グローバルサイト)".
3. Meanwhile, the Import Wizard is still hanged, and I still can't open Firefox as a browser.
4. By the way, the reason Firefox is trying to install in English is that
a Google search for firefox showed site http://www.mozilla.org/en-US/firefox/new/
and http://www.mozilla.org/en-US/firefox/new/ did not redirect to mozilla.jp
5. Meanwhile, the Import Wizard is still hanged, and I still can't open Firefox as a browser.
The OS is Windows 7 SP1 64-bit Japanese with all Windows Updates except that
Internet Explorer is version 10 because Internet Explorer 11 breaks Outlook 2003.

As previously stated:
So in summary, not much damage has been done, but the hang of the original Import Wizard is not solved.
When the original Import Wizard hanged during installation, there was a Firefox icon on the desktop but double-clicking the icon did not start Firefox because there was already a firefox.exe process (the hanging installer) so it would not even be possible to do the procedure of "import from another browser". I did not know that it was hanging on favorites. In fact I think it was not hanging on favorites, it was probably hanging on history and it was hanging on abusing my Outlook.pst file because Outlook couldn't even run. I think it didn't reach the stage of importing favorites because that would come later than the hang of importing history.
But at the time, I didn't know what it was hanging on, it was just hanging there for an hour with the Cancel button grayed out (together with two other grayed out buttons). I thought I was going to have to use Windows Task Manager to kill the installer and then uninstall whatever amount of Firefox had been installed. But I tried the [X] in the upper right corner and it did work more or less, even though the Cancel button didn't.
The original problem is not solved.
Also the abuse of Outlook.pst is not solved. Why would Firefox (not Thunderbird) prevent Outlook from accessing Outlook.pst?
I do know that everyone's a volunteer and I can't complain the way I complain about Microsoft, but I can still say accurately that the problem is not solved. If you don't want to solve it then mark it WONTFIX, but don't pretend that you solved it.

How do I use "LabVIEW dll import wizard" to import NETAPI32.dll

I am trying to use the LabVIEW dll import wizard for the first time. I am not very familiar in C-coding so this might be a good help instead of configuring CallLibraryFunction nodes myself.
I want to import NETAPI.dll. I am interested in several functions in that dll, but my main priority is the funtion NetUserGetInfo(). On MSDN I have found that the header file for the mentioned function should be: lmaccess.h (include lm.h).
My problem is this:
The shared library contains 317 function(s). But no function is found and recognized in the header file. The following function(s) cannot be wrapped. If you want to import these functions, please review the warning messages next to the functions below. You will need to fix the problems before you can continue with the wizard.
The function cannot be imported into LabVIEW. This might be caused by one of the following problems:
The function is not declared in the header file but is exported in the library.
Check the header file to make sure it contains declarations of the function.
Undefined symbols can prevent the wizard from recognizing functions and parameters. To correct this problem, check the header file to determine if you must add predefined symbols. Click the Back button to return to the previous page of the wizard to add a predefined symbol (for example, "NIAPI_stdcall = __stdcall" or "NIAPIDefined = 1").
MIDL_PASS;_STDCALL_SUPPORTED;__cplusplus;
Any suggestions how I can solve my issue?

astrid wrote:
I am trying to use the LabVIEW dll import wizard for the first time. I am not very familiar in C-coding so this might be a good help instead of configuring CallLibraryFunction nodes myself.
I want to import NETAPI.dll. I am interested in several functions in that dll, but my main priority is the funtion NetUserGetInfo(). On MSDN I have found that the header file for the mentioned function should be: lmaccess.h (include lm.h).
My problem is this:
The shared library contains 317 function(s). But no function is found and recognized in the header file. The following function(s) cannot be wrapped. If you want to import these functions, please review the warning messages next to the functions below. You will need to fix the problems before you can continue with the wizard.
The function cannot be imported into LabVIEW. This might be caused by one of the following problems:
The function is not declared in the header file but is exported in the library.
Check the header file to make sure it contains declarations of the function.
Undefined symbols can prevent the wizard from recognizing functions and parameters. To correct this problem, check the header file to determine if you must add predefined symbols. Click the Back button to return to the previous page of the wizard to add a predefined symbol (for example, "NIAPI_stdcall = __stdcall" or "NIAPIDefined = 1").
MIDL_PASS;_STDCALL_SUPPORTED;__cplusplus;
Any suggestions how I can solve my issue?
Sorry I forgot the attachment, but here it is.
Attachments:
NETAPI32.doc ‏103 KB

Report and Layout Import Wizard does not work

We used the Report and Layout Import Wizard extensively in 8.80 with no problems encountered.
We are now upgraded to 8.81 PL07. This is the first attempt at using the wizard in 8.81. The intro window of the wizard, with 'To Start, use the "Next" button' message is as far as I can get. The "Next" and "Cancel" buttons are inoperative - when I click them, there is no response (but they are not greyed out). The program has not crashed - I can move the window, and the "X" close button at top right works, but nothing else does. I am logged in as a superuser, running B1 in an RDP session on the server, same as under 8.80.
Any ideas out there?

Hi,
This is a 8.81 PL07 bug!
I had the same problem this week, and i found the note [1615932 - Buttons "Cancel" and "Next" are inactive in Report and layout import wizard window], that says that it is corrected on PL08!
Regards,
Alice

BO XI 3.1 FP 3.4 : Import wizard gives error when trying to import users

Hi all,
I tried to import BO users from backup repo to production repo using the import wizard.
The import failed with message
Committing the export object to the destination CMS failed. Reason: Fehler beim Senden der Objekte an Server:
Fehler beim Erstellen.
However, all other objects (universes, public folders, public reports, ...) become imported without any problem
Env:
server platform : AIX 5.3
database : DB2 V 9.5
BO version : 3.1 SP3 (12.3.0) client and 3.1 FP 3.4 (12.3.4) server
Since source and destination versions are the same, problems with version migration are unlikely.
Studying other forum threads, gave indication that there are problems if the license type (concurrent use vs. named user) are different. This is not the case - both system user named user licenses.
Does somebody have an idea on how resolve this problem?
Thanks,
Robert

Hi Dennis,
I tried to update the clients but that didn't work. The installer found a patch with newer date and refused to continue. Trying to get rid of that problem, I removed the client software and re-installed it afterwards - but this problem with the newer patch remained.
I opened a case @ BO support to investigate this problem.
Thanks,
Robert

Error while importing text file to Power Pivot via Table Import Wizard

Hello there,
I'm a rookie at handling Excel to be honest. I've been trying to import a .txt file to Excel (it contains around 14 million rows of information) but Excel won't let me since it can only handle around 1 million rows per sheet (too troublesome to do such thing
14 times in 14 different sheets). Then I googled that Power Pivot let me handle around 100 million rows in a Pivot.
I'm trying to import this .txt file to Power Pivot by doing the following:
Home tab > From Text > File Path (insert .txt location here) > Finish
After that it shows the Table Import Wizard retrieving the rows from the .txt file. Problem is... at the end of the import (once it hits row 14,000,000 or so) it shows an error. It states the following:
"Memory error: Allocation failure : Not enough storage is available to process this command. .
The current operation was cancelled because another operation in the transaction failed."
Please note that the size of the .txt file is 900 MB.
Another thing is that, when I select the .txt file from its location at the File Path section, the "preview" field only shows 50 rows, not all of them. Is that okay to happen?
Is it because the size of the .txt file is too big?
Please let me know if you need more info in regards to this.
Thanks in advance.

Hi AdiUser,
Only showing 50 rows for the preview is normal behaviour. Based on what you've described, it sounds like Power Pivot is running out of memory when you are loading this .txt file. Are you running the 32 bit or 64 bit version of Excel. Also, if you are running
the 64 bit version how much RAM is available?
If you're running the 32 bit version then the available RAM for Power Pivot is less than 1 GB even if the system has more than this installed. You can address this by installing the 64 bit version. If you're running the 64 bit version then it may be
that you don't have enough RAM to accommodate this amount of data and you may consider upgrading the RAM. Alternatively, you could try and reduce the size of the table in memory by using the preview screen to remove any columns that are not of use. This
is especially important if there are any column with a high number of unique values that aren't actually needed in the model. In addition to removing columns altogether, you could try filtering the data so that only a subset of the rows are imported.
This can also be done from the preview screen.
Regards,
Michael Amadi
Please use the 'Mark as answer' link to mark a post that answers your question. If you find a reply helpful, please remember to vote it as helpful :)
Website: http://www.nimblelearn.com
Blog: http://www.nimblelearn.com/blog
Twitter: @nimblelearn

Import Wizard fails to export - object could not be written in the ids-file

Hello,
the complete export of the BO environment into a biar-file with the import wizard fails. In the wizard's dialog every option is choosen as "all". When the export is started it stops already in the folder objects. The log file says the object allocation could not be written in the ids-file. So I presume a problem with references.
In order to figure out which object is responsible for the error I varied the export and finally identified the "repository objects" as the the responsible type of objects. When I now run the export and only use the needed repository objects it works fine.
But I don't know, if export is complete (I presume it).
Has anyone a idea what the reason can be for this problem? Can it be fixed in the database? This kind of export did work fine the week before.
thanks, matthias

Could you quote the entire error message, word-for-word, verbatim? What Import settings are you using ... Copy, Move, Add?
Most likely you have a permissions issue, but it will be much more clear to me if I can see the entire message.

Data Import Wizard from Excel on DATE column

I have exported data to a csv in Oracle SQL Developer and one of the columns are of an Oracle Date datatype. In opening up Excel I see the Date column represented as 15-MAY-01 12.00.00.000000000 AM.
I am now going through the Data Import Wizard to create a new table and import the data. When I get to Step 3 of 4 it reads the data and assigns it a VARCHAR2. I want the column to be Date or Timestamp. In this case I choose timestamp and for format entered DD-MON-YY hh.mi.ss.fffffffff AM.
When I go to Step 4 of 4 to and click the Verify button I get:
"Verifying if the Date columns have date formats" Date columns DOT_LOGN_EFDT, have invalid or null date formats.
I am using Oracle SQL Developer 2.1.0.63 Build 63.73.
Any idea what I put in the format window to read the excel value of 15-MAY-01 12.00.00.000000000 AM correctly?

I am not able to reproduce your problem. When I export a date column, I do not get the time portion. This is the expected behavior. When re-importing the date, I therefore have no problem. I have tried manipulating the tools->preferences->database->nls->date format mask to include the time (and fractional seconds), but export still only exports the date portion. The fractional seconds is not valid for a date field, which explains the import error you are getting. The question remains as to why the exported data has the time. Can you describe your exact steps for doing the export?

Import wizard logon error

When attempting to log onto a system using the cluster name, the Import
Wizard returns the following error:
Error logging on to server. Check logon information and try again.
(IWZ 00001)
Unable to connect to cluster <cluster name:port number> to retrieve CMS
member list. Locally cached member list not present. Logon cannot

IW works by making a connection to a CMS I don't think it was designed for or recommended to try to have it bounce between CMS's. Even if you could get this to work I would imagine it could cause data integrity problem trying to keep up with which CMS is transferring to where...
Use the CMS name
Regards,
Tim

"File" does not have "Import. Can't open Import Wizard

"File" on the Mozilla Firefox screen has no "Import" necessary to open the Import Wizard. I can't import any info. from my former browser.

The Import wizard has been moved to the Library window: click ''Bookmarks > Show All Bookmarks > Import and Backup > Import Data from Another Browser''
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Demantra - problem with procedure EP_BUILD_MODEL

Hi,
We have installed Demantra 7.3.1 Then create new model with Data Model Wizard. After clicking Build model we got the following error:
Error - ORA-20001: Error in Procedure REBUILD_DATABASE ORA-1400: can not insert null in (DEAMANTRA.LOC_LEVELS.ENGINE_PROFILES_ID)
I found out that reason of this problem is procedure Data_Model.rebuild_database
Statements like this:
INSERT INTO LOC_LEVELS (loc_level,loc_field_name,loc_field) VALUES (1,'Lowest Location Level',1);
INSERT INTO LOC_LEVELS (loc_level,loc_field_name,loc_field) VALUES (2,'Highest Fictive Level',0);
INSERT INTO ITEMS_LEVELS (item_level,item_field_name,item_field) VALUES (1,'Lowest Item Level',2);
INSERT INTO ITEMS_LEVELS (item_level,item_field_name,item_field) VALUES (2,'Highest Fictive Level',0);
INSERT INTO FORECAST_TREE (forecast_level,item_level,loc_level) VALUES (1,1,1);
INSERT INTO FORECAST_TREE (forecast_level,item_level,loc_level) VALUES (2,1,2);
INSERT INTO FORECAST_TREE (forecast_level,item_level,loc_level) VALUES (3,2,2);
gives error due to a fact that all this tables (LOC_LEVELS, ITEMS_LEVELS, FORECAST_TREE) has column ENGINE_PROFILES_ID with nullable set to no.

Hi,
The problem is solved it was a constraint violation when creating the data model on the location levels.
Thank you

LabVIEW web services import wizard can only import .asmx?wsdl URLs only?

Hi,
I am new to using web services from labVIEW.
I would like to import list of methods a web service is providing into LabVIEW VIs
is there any limitation in terms of the
Web services should have been developed only in .net
Not in Java or C etc.
I am seeing an url which we needed to use as "http://10.155.20.100:8080//ControllerService" only.
This is not being accepted by import wizard
Can anyone please enlighten me on this?
Regards
Prakash

I'm running into the same problem except I'm deploying the webservice using .NET WCF (not asp). I'm using LabVIEW2011 32bit on Windows 7 64bit. Is this possible? My WSDL URL is something like this: http://localhost:8085/TSNISvcLib/TSNISvcLibImpl/ABC?wsdl and I'm getting the error below:
AEs please advise/respond!!!
Attachments:
4DEL.png ‏3 KB

Problem on procedure import wizard

Similar Messages

Maybe you are looking for