Problem On Sun Netra 210 Network

Hi All,
Why does my sun netra 210 cannot passed the network packet over HP Procurve 3500yl Core Switch?
But, no problem occured when i use Cisco Catalyst Core Switch.
Is there any incompability between Sun and Hp Procurve, or i need to install new patches? Please help me.
Thankyou in advance

Dear sir,
i already tried that,
i also have try to use another port on the switch.
The strange thing is, when i use laptop (with the same ipadress as the Sun), other computer from another segment can ping, But, when i returned the ipadress to the Sun server, they cannot ping (RTO).

Similar Messages

Problem On Netra 210 Network

Hi All,
Why does my sun netra 210 cannot passed the network packet over HP Procurve 3500yl Core Switch?
But, no problem occured when i use Cisco Catalyst Core Switch.
Is there any incompability between Sun and Hp Procurve, or i need to install new patches? Please help me.
Thankyou in advance

Dear sir,
i already tried that,
i also have try to use another port on the switch.
The strange thing is, when i use laptop (with the same ipadress as the Sun), other computer from another segment can ping, But, when i returned the ipadress to the Sun server, they cannot ping (RTO).

Sun Netra 210 Interconnection With Procurve 3500 Switch

Hi, why does my sunnetra210 seems unable to send data packet over HP Procurve 3500 Core Switch?
Thanks in advance

Dear sir,
i already tried that,
i also have try to use another port on the switch.
The strange thing is, when i use laptop (with the same ipadress as the Sun), other computer from another segment can ping, But, when i returned the ipadress to the Sun server, they cannot ping (RTO).

Netra 210 - problem with powering on (SEEPROM access failed)

Hi,
Almost everyday, when I for the first time power on the NETRA-210 server by "poweron" command or by pressing button, the server says:
Configuring system memory & CPU(s)
ERROR: motherboard SEEPROM access failed
System configuration failed, powering off
The second try of powering on is successfull, no error is displayed, system boots with .
System is updated with latest patches and the OBP version is 4.22.33 (patch 121683-06), but it does not solve the problem.
Best regards.

You do know that JavaScript is a different language that Java, right?

Netra 210 interface problem

I`m new to Sun.
We have Sun Sollaris 10 on netra 210 with two interfaces, one is connected to Avaya PBX (link is fixed to 10Mbps HalfDuplex, because this hardware on Avaya PBX is old card and it does not support any other speed) and second interface is connected to LAN.
Till couple of days ago everything was working fine and without any errors in log files. Couple of days ago someone accidentally turned power off for all our equipment except for PBX.
When system had rebooted, interface bge0 on Sun is getting down and back up every few hour.
this is what we have in /var/adm/messages
Nov 24 00:20:04 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link down
Nov 24 00:20:24 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link up 10
Mbps Half-Duplex
Nov 24 01:20:15 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link down
Nov 24 01:20:35 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link up 10
Mbps Half-Duplex
Nov 24 02:49:25 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link down
Nov 24 02:49:45 0842TFI050 bge: [ID 801593 kern.notice] NOTICE: bge0: link up 10
Mbps Half-Duplex
can you help, I do not know what is wrong. I change cables, and also equipment on Avaya PBX, and every time is the same result

System was set to autonegotiation. When I set system to 10 Mbps halfduplex with:
ndd -set /dev/bge0 adv_10hdx_cap 1
ndd -set /dev/bge0 adv_10fdx_cap 0
ndd -set /dev/bge0 adv_100hdx_cap 0
ndd -set /dev/bge0 adv_100fdx_cap 0
ndd -set /dev/bge0 adv_1000hdx_cap 0
ndd -set /dev/bge0 adv_1000fdx_cap 0
ndd -set /dev/bge0 adv_autoneg_cao 0
link went down and did not come up until I set it back to autonegotiation.
I also set bge.cong file if system would reboot with:
name="bge" parent="/pci@1f,700000" unit-address="2"
adv_autoneg_cap=0 adv_1000fdx_cap=0 adv_1000hdx_cap=0
adv_100fdx_cap=0 adv_100hdx_cap=0 adv_10fdx_cap=0 adv_10hdx_cap=1;
And after I rebooted the system, link was stil down

Installation failed when using Jumpstart Server to install SUN Netra T1 200

I have a problem to install a couple of Sun Netra T1 200 Servers with a Jumpstart Server. The Jumpstart Server is set up and I have executed the add_install_client Script. If I boot the Server which should to be installed the server crashes after getting the assigned IP-Address with a software fault.
Attached i will sent the Jumpstart-Client-Output and the config Files of the Jumpstart-Server.
****Netra T1 Server Output, while configured as an Jumpstart client:****
ok boot net -install
Resetti
LOM event: +2h28m47s host reset
ng ...
`
Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #16692502.
Ethernet address 8:0:20:fe:b5:16, Host ID: 80feb516.
Executing last command: boot net -install
Boot device: /pci@1f,0/pci@1,1/network@c,1 File and args: -install
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
2ae00 Warning: boot will not enable cache
Requesting Internet address for 8:0:20:fe:b5:16
Enter filename [kernel/sparcv9/unix]:
Enter default directory for modules [platform/SUNW,UltraAX-i2/kernel /platform/sun4u/kernel /kernel /usr/kernel]:
SunOS Release 5.8 Version Generic_108528-13 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
whoami: no domain name
panic[cpu0]/thread=300010a9ba0: Can't invoke , error 2
000002a1000f7a40 genunix:icode+274 (ffbefff0, 0, 300010a7b88, 0, ffbefffc, ffffffffffffffff)
%l0-3: 00000000ffbefffc 0000000000000000 0000000000002000 000002a10000fd20
%l4-7: 0000000000000bb8 0000000010423a00 000000001041b2f8 00000000000007a9
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Resetti
LOM event: +2h36m51s host reset
ng ...
p
Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard
OpenBoot 4.0, 1024 MB memory installed, Serial #16692502.
Ethernet address 8:0:20:fe:b5:16, Host ID: 80feb516.
Executing last command: boot
Boot device: disk File and args:
SunOS Release 5.8 Version Generic_108528-13 64-bit
Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
configuring IPv4 interfaces: eri0.
Hostname: infrasrv
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c1t0d0s4: is stable.
/dev/rdsk/c1t0d0s6: is stable.
Starting IPv4 routing daemon.
starting rpc services: rpcbind done.
Setting netmask of eri0 to 255.255.255.0
Setting default IPv4 interface for multicast: add net 224.0/4: gateway infrasrv
syslog service starting.
Print services started.
Jun 26 04:48:14 infrasrv sendmail[220]: My unqualified host name (infrasrv) unknown; sleeping for retry
volume management starting.
The system is ready.
infrasrv console login: root
Password:
Last login: Thu Jun 26 02:13:59 on console
Jun 26 04:48:24 infrasrv login: ROOT LOGIN /dev/console
Sun Microsystems Inc. SunOS 5.8 Generic Patch October 2001
Sun Microsystems Inc. SunOS 5.8 Generic Patch October 2001
# uname -i
SUNW,UltraAX-i2
# ^[[A
^[[A: not found
# uname -m
sun4u
*****Config Files of the Jumpstart-Server******************
Sysidcfg
bootparams
bash-2.03# more bootparams
infrasrv root=adminws:/cdrom/sol_8_202_sparc/s0/Solaris_8/Tools/Boot install=ad
minws:/export/install boottype=:in sysid_config=adminws:/export/sysidcfg install
_config=adminws:/export/config rootopts=:rsize=32768
bash-2.03#
rules
bash-2.03# more rules
#       @(#)rules 1.12 94/07/27 SMI
# The rules file is a text file used to create the rules.ok file for
# a custom JumpStart installation. The rules file is a lookup table
# consisting of one or more rules that define matches between system
# attributes and profiles.
# This example rules file contains:
#   o syntax of a rule used in the rules file
#   o rule_keyword and rule_value descriptions
#   o rule examples
# See the installation manual for a complete description of the rules file.
# RULE SYNTAX:
# [!]rule_keyword rule_value [&& [!]rule_keyword rule_value]... begin profile fi
# nish
# "[ ]" indicates an optional expression or field
# "..." indicates the preceding expression may be repeated
# "&&" used to "logically AND" rule_keyword and rule_value pairs together
# "!" indicates negation of the following rule_keyword
# rule_keyword a predefined keyword that describes a general system
# attribute. It is used with the rule_value to match a
# system with the same attribute to a profile.
# rule_value a value that provides the specific system attribute
# for the corresponding rule_keyword. A rule_value can
# be text or a range of values (NN-MM).
# To match a range of values, a system's value must be
# greater than or equal to NN and less than or equal to MM.
# begin a file name of an optional Bourne shell script
# that will be executed before the installation begins.
# If no begin script exists, you must enter a minus sign (-)
# in this field.
# profile a file name of a text file used as a template by the
# custom JumpStart installation software that defines how
# to install Solaris on a system.
# finish a file name of an optional Bourne shell script
# that will be executed after the installation completes.
# If no finish script exists, you must enter a minus sign (-)
# in this field.
# Notes:
# 1. You can add comments after the pound sign (#) anywhere on a line.
# 2. Rules are matched in descending order: first rule through the last rule.
# 3. Rules can be continued to a new line by using the backslash (\) before
# the carriage return.
# 4. Don't use the "*" character or other shell wildcards, because the rules
# file is interpreted by a Bourne shell script.
# RULE_KEYWORD AND RULE_VALUE DESCRIPTIONS
# rule_keyword rule_value Type rule_value Description
# any minus sign (-) always matches
# arch text system's architecture type
# domainname text system's domain name
# disksize text range system's disk size
# disk device name (text)
# disk size (MBytes range)
# hostname text system's host name
# installed text text system's installed version of Solaris
# disk device name (text)
# OS release (text)
# karch text system's kernel architecture
# memsize range system's memory size (MBytes range)
# model 'text' system's model number
# network text system's IP address
# totaldisk range system's total disk size (MBytes range)
# RULE EXAMPLES
# The following rule matches only one system:
# hostname sample_host - host_class set_root_pw
# The following rule matches any system that is on the 924.222.43.0 network
# and has the sun4c kernel architecture:
# Note: The backslash (\) is used to continue the rule to a new line.
#network 924.222.43.0 && \
# karch sun4c - net924_sun4c -
# The following rule matches any sparc system with a c0t3d0 disk that is
# between 400 to 600 MBytes and has Solaris 2.1 installed on it:
#arch sparc && \
# disksize c0t3d0 400-600 && \
# installed c0t3d0s0 solaris_2.1 - upgrade -
# The following rule matches all x86 systems:
#arch i386 x86-begin x86-class -
# The following rule matches any system:
#any - - any_machine -
hostname infrasrv - infrasrv_class -
hostname msm_srv1 - msm_srv_class -
hostname msm_srv2 - msm_srv_class -
bash-2.03#
class
bash-2.03# more infrasrv_class
install_type initial_install
system_type standalone
partitioning explicit
filesys c0t0d0s0 2048 /
filesys c0t0d0s1 10
filesys c0t0d0s3 1024 swap
filesys c0t0d0s4 2048 /var
filesys c0t0d0s5 2048 /opt
filesys c0t0d0s6 free /export
cluster SUNWCXall
bash-2.03# more msm_srv_class
install_type initial_install
system_type standalone
partitioning explicit
filesys c0t0d0s0 2048 /
filesys c0t0d0s1 10
filesys c0t0d0s3 1024 swap
filesys c0t0d0s4 2048 /var
filesys c0t0d0s5 free /opt
cluster SUNWCXall
bash-2.03#
ethers
bash-2.03# more ethers
8:00:20:fe:b5:16 infrasrv
bash-2.03#
hosts
bash-2.03# more hosts
# Internet host table
127.0.0.1 localhost
192.168.0.220 adminws loghost
192.168.0.210 infrasrv
192.168.0.200 tc
bash-2.03#
dfstab
bash-2.03# more dfstab
# Place share(1M) commands here for automatic execution
# on entering init state 3.
# Issue the command '/etc/init.d/nfs.server start' to run the NFS
# daemon processes and the share commands, after adding the very
# first entry to this file.
# share [-F fstype] [ -o options] [-d "<text>"] <pathname> [resource]
# .e.g,
# share -F nfs -o rw=engineering -d "home dirs" /export/home2
share -d "jumpstart conf dir" /export/config
share -F nfs -o ro,anon=0 /export/install
share -F nfs -o ro,anon=0 /cdrom/sol_8_202_sparc/s0/Solaris_8/Tools/Boot
bash-2.03#
tftpboot
bash-2.03# pwd
/tftpboot
bash-2.03# ls -al
total 348
drwxrwxr-x 2 root other 512 Jun 26 11:45 .
drwxr-xr-x 24 root root 512 Jun 26 11:45 ..
lrwxrwxrwx 1 root other 26 Jun 26 11:45 C0A800D2 -> inetboot.SUN4U.Solaris_8-1
lrwxrwxrwx 1 root other 26 Jun 26 11:45 C0A800D2.SUN4U -> inetboot.SUN4U.Solaris_8-1
-rwxr-xr-x 1 root other 159416 Jun 26 11:45 inetboot.SUN4U.Solaris_8-1
-rw-r--r-- 1 root other 318 Jun 26 11:45 rm.192.168.0.210
lrwxrwxrwx 1 root other 1 Jun 26 11:45 tftpboot -> .
bash-2.03#

Hi,
It seems to me that you have not created a proper sysidcfg file. From your post, it looks to me like your sysidcfg contains no entries. This is why it prompts you to enter the kernel path. Look on docs.sun.com for a guide to creating the sysidcfg file .

Sun Ultra 210 AOLM stuck in a loop

start------------------LOOP--------------
Loading the runtime image...
ALOM - POST run incomplete previously, no POST this time
ALOM BOOTMON v1.6.7
ALOM Build Release: 001
Reset register: e8000000 EHRS ESRS LLRS CSRS
Check for Handshake
Returned from Boot Monitor and Handshake
Clearing Memory Cells
Memory Clean Complete
Loading the runtime image...
end------------------LOOP--------------
I was able to get the below ALOM Menu. Tried few things from the Menu, but no luck. I would appreciate some ideas.
ALOM <ESC> Menu
f - Wait for flash download from host.
C - Copy Boot Monitor from FLASHBOAT.
j - Jump to main code (at 0x01010000).
m - Run POST Menu.
(Do not try this after a flash update of the boot monitor!)
d - play DOOM
s - Set clock speed
e - Set external and internal console serial ports baud rate
i - Set internal control serial port baud rate
t - Toggle 'OK' flag
R - Reset SC
b,h,w - Read byte/halfword/word
B,H,W - Write byte/halfword/word
r - Return to bootmon
Your selection:

Nik,
I tried JP2, JP3 moving around. I was able to get out of ALOM and to OK prompt. But at ok prompt it could not find the disks. I tired connecting external power to a SATA disk and a SATA DVD player. Non were able to recognize. reset-all, probe-scsi-all did not find my external SATA drives/DVD or the internal two SATA hard drives.
Here is the output from them.
JP2, JP3 In:
pwr on
pwr off, take out JP3
pwr on
ERROR: Could not read keyswitch!
Executing Power On Self Test
0>
0>@(#)Sun Fire[TM] V210/V240,Netra[TM] 210/240 POST 4.22.33 2007/06/18 13:07
/export/delivery/delivery/4.22/4.22.33/post4.22.x/Fiesta/enxs/integrated
(root)
0>Copyright 2007 Sun Microsystems, Inc. All rights reserved
0>OBP->POST Call with %o0=00000800.01014000.
0>Diag level set to MAX.
0>Verbosity level set to NORMAL.
0>Start Selftest.....
0>CPUs present in system: 0
0>Test CPU(s)....Done
0>Interrupt Crosscall....Done
0>Init Memory....Done
0>PLL Reset....Done
0>Init Memory....Done
0>Test Memory....Done
0>Test CPU Caches....Done
0>Functional CPU Tests....Done
0>IO-Bridge Tests....Done
0>INFO:
0> POST Passed all devices.
0>
0>POST: Return to OBP.
ERROR: Could not read keyswitch!
Configuring system memory & CPU(s)
ERROR: Could not read keyswitch! Probing system devices
Probing memory
ERROR: Cannot determine chassis type
ERROR: SD Segment not found in SCSI backplane FRUPROM
Probing I/O buses
Sun Fire V210/V240,Netra 210/240, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.22.33, 1024 MB memory installed, Serial #84121232.
Ethernet address 0:21:28:3:96:90, Host ID: 85039690.
Running diagnostic script obdiag/normal
Testing /pci@1e,600000/ide@d
Testing /pci@1e,600000/isa@7/rtc@0,70
Testing /pci@1c,600000/scsi@2
Testing /pci@1c,600000/scsi@2,1
Testing /pci@1e,600000/isa@7/serial@0,2e8
Testing /pci@1e,600000/isa@7/serial@0,3f8
ERROR: ERROR: Unable to open the SC device.
ok
ok boot
ERROR: Could not read keyswitch! Probing system devices
Probing memory
ERROR: Cannot determine chassis type
ERROR: SD Segment not found in SCSI backplane FRUPROM
Probing I/O buses
Sun Fire V210/V240,Netra 210/240, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.22.33, 1024 MB memory installed, Serial #84121232.
Ethernet address 0:21:28:3:96:90, Host ID: 85039690.
ERROR: ERROR: Unable to open the SC device.
Rebooting with command: boot
Boot device: disk0:a File and args:
Evaluating:
Can't open boot device
ok
ok show-disks
a) /pci@1c,600000/scsi@2,1/disk
b) /pci@1c,600000/scsi@2/disk
c) /pci@1e,600000/ide@d/cdrom
d) /pci@1e,600000/ide@d/disk
q) NO SELECTION
Enter Selection, q to quit: a
/pci@1c,600000/scsi@2,1/disk has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for /pci@1c,600000/scsi@2,1/disk
ok boot disk0:a
Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args:
/pci@1c,600000/scsi@2/disk
/pci@1c,600000/scsi@2,1/disk
ok boot /pci@1c,600000/scsi@2,1/disk
ok boot -r
Boot device: /pci@1c,600000/scsi@2/disk@0,0:a File and args: -r
Can't open boot device
ok reste-all
ok probe-scsi-all
/pci@1c,600000/scsi@2,1
/pci@1c,600000/scsi@2
ok
ok show-devs
/pci@1d,700000
/pci@1c,600000
/pci@1e,600000
/pci@1f,700000
/memory-controller@0,0
/SUNW,UltraSPARC-IIIi@0,0
/virtual-memory
/memory@m0,0
/aliases
/options
/openprom
/chosen
/packages
/pci@1d,700000/network@2,1
/pci@1d,700000/network@2
/pci@1c,600000/scsi@2,1
/pci@1c,600000/scsi@2
/pci@1c,600000/scsi@2,1/tape
/pci@1c,600000/scsi@2,1/disk
/pci@1c,600000/scsi@2/tape
/pci@1c,600000/scsi@2/disk
/pci@1e,600000/ide@d
/pci@1e,600000/usb@a
/pci@1e,600000/pmu@6
/pci@1e,600000/isa@7
/pci@1e,600000/ide@d/cdrom
/pci@1e,600000/ide@d/disk
/pci@1e,600000/pmu@6/gpio@80000000,8a
/pci@1e,600000/pmu@6/i2c@0,0
/pci@1e,600000/isa@7/rmc-comm@0,3e8
/pci@1e,600000/isa@7/serial@0,2e8
/pci@1e,600000/isa@7/serial@0,3f8
/pci@1e,600000/isa@7/power@0,800
/pci@1e,600000/isa@7/i2c@0,320
/pci@1e,600000/isa@7/rtc@0,70
/pci@1e,600000/isa@7/flashprom@2,0
/pci@1e,600000/isa@7/i2c@0,320/gpio@0,68
/pci@1e,600000/isa@7/i2c@0,320/gpio@0,44
/pci@1e,600000/isa@7/i2c@0,320/idprom@0,50
/pci@1e,600000/isa@7/i2c@0,320/nvram@0,50
/pci@1e,600000/isa@7/i2c@0,320/rscrtc@0,d0
/pci@1e,600000/isa@7/i2c@0,320/dimm-spd@0,b8
/pci@1e,600000/isa@7/i2c@0,320/dimm-spd@0,b6
/pci@1e,600000/isa@7/i2c@0,320/power-supply-fru-prom@0,b0
/pci@1e,600000/isa@7/i2c@0,320/motherboard-fru-prom@0,a2
/pci@1e,600000/isa@7/i2c@0,320/i2c-bridge@0,18
/pci@1e,600000/isa@7/i2c@0,320/i2c-bridge@0,16
/pci@1f,700000/network@2,1
/pci@1f,700000/network@2
/openprom/client-services
/packages/SUNW,asr
/packages/SUNW,fru-device
/packages/SUNW,i2c-ram-device
/packages/obp-tftp
/packages/kbd-translator
/packages/dropins
/packages/terminal-emulator
/packages/disk-label
/packages/deblocker
/packages/SUNW,builtin-drivers
ok

Sun Netra X4250 ILOM update = unable to change iLOM ip to the factory def

This is about Sun Netra X4250 Server ILOM firmware update, using the update provided here:
http://www.sun.com/servers/netra/x4250/downloads.jsp
ILOM updated to Version 3.0.3.30 (ILOM) build 44534
We were able to upgrade the iLOM firmware from 2.0.2.6 to 3.0.3.30. After the upgrade, we were unable to change the iLOM ip to the factory default ip for hardware configuration. The problem was that after changing the iLOM ip with factory default ip (192.168.0.10) and saving the changes, the ip was reverted to earlier assigned ip i.e. 192.168.0.145. To check this, we downgraded the iLOM firmware back to 2.0.2.6 and rechecked the procedure. The iLOM ip was successfully changed to the factory default ip.
So, we suspect that the problem could be due to the new firmware.

This is about Sun Netra X4250 Server ILOM firmware update, using the update provided here:
http://www.sun.com/servers/netra/x4250/downloads.jsp
ILOM updated to Version 3.0.3.30 (ILOM) build 44534
We were able to upgrade the iLOM firmware from 2.0.2.6 to 3.0.3.30. After the upgrade, we were unable to change the iLOM ip to the factory default ip for hardware configuration. The problem was that after changing the iLOM ip with factory default ip (192.168.0.10) and saving the changes, the ip was reverted to earlier assigned ip i.e. 192.168.0.145. To check this, we downgraded the iLOM firmware back to 2.0.2.6 and rechecked the procedure. The iLOM ip was successfully changed to the factory default ip.
So, we suspect that the problem could be due to the new firmware.

Netra 210 slow boot

When I reboot my netra 210 is hangs at the console login prompt for 11 minutes before it contiues to boot to the GUI login screen.

We inheritied a system that hung for at least 5 minutes in a similar fashion - it was looking for a device that it was told was there but was no longer physically present. Once we reconfigured it, the problem was resolved. Perhaps your problem is similar - I'm assuming once it boots to the GUI, everything else works fine?

Sun netra t 200 please help

Hello and Hi to all members,
I am trying to install solaris 9 OS to my sun netra t 200, but the problem is i dont have any sun keyboard. I am currently using serial connection installing the OS. I have problem finding the command especially F2_standard.
please help me regarding the problem??I tried to search from the net but i still can find it?? please help me??
thanks
syafiq

During a serial installation, it asked for your terminal type. How did you respond?
During the serial installation it displays a message that function keys like [F2] can be replaced with the key sequence <ESC>-<2>. That should work fine with a 'vt100' connection.
Darren

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them eithe

Having horrible service with 4GLTE I have had 3G for several weeks (I am not the only person I know having this problem), I have reset my network settings and it did not resolve the issue. I am also unable to send SMS and text messages without them either failing or not sending at all. Is there an outage in the Cleveland, Ohio area (zip codes 44129, 44134, 44137) or anything else I can do to resolve this issue?

Not that I'm a Verizon employee, but I have experience in the field. An LTE tower will only extend up to, on a perfect day, with no elevation, 6-7 miles. On a typical day, you will be lucky at four (4) miles. The three ZIP codes you've given are all within about a 12 mile radius. That would mean that 2-3 towers are currently down at the same time, and Verizon would know about it within the hour. Being it's Cleveland, I'm sure they would receive numerous calls regarding an outage of that size.
My point is that if you're having issues in all three ZIP codes, chances are it's a phone issue. If you're handset is simply not receiving LTE, but still receiving 3G, that would signify a SIM card issue. You need to get your SIM card replaced.

Problems Setting up my wireless network with an Xb...

Hi, I have had some problems setting up my wireless networking.
I have everything switched on and am able to go online with the laptop and the Xbox with no problems but when I try to share media with the xbox I have problems.
I have opened the ports specified in the setup from xbox on windows firewall and have no problem connection Via Ethernet cable but when using wireless the xbox cannot detect the laptop.
I have checked the network map and both xbox and laptop are connected and have enabled sharing and am running sharing software.
Below is the network map.
I have also been having problems with BT software, the free virus protection will not install, The desktop help will not launch although it shows up on task manager and the installation disk does not launch correctly it doesn't get past the loading screen.
I have had a printer on the wireless network and had no problems printing.
If anyone knows how to resolve this please help.

I have this same Motorola modem and I just verified that my 802.11n AirPort Express Base Station (AXn) can get Internet access with this modem without any issues.
When changing ISPs (or networking equipment) it's always a good idea to start from "scratch" in configuring your equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Problems with communication across a network using shared variables

I have two programs(projects) running on two different computers connected with a LAN. I am using LabVIEW 8.0, and the DSC-module. The program on one of the computers have measurements that I want to collect and show on the program running on the other computer on the network. I choose the indicator where I want to show the data, select ''Properties'', ''Data binding'', ''Shared Variable Engine (NI-PSP)'', ''Network Items'' and then browse for a Network...but the problem is that in my ''Network Neighborhood'' There is only one computer...and that is the one I am one...not the computer on my Network that I want to communicate with....
Have anyone any suggestions on how to solve this?
Kind regards Mari

Mari,
Check this link regarding trouble shooting network-published shared variables:
http://digital.ni.com/public.nsf/websearch/6E37AC5435E44F9F862570D2005FEF25?OpenDocument
This might be a firewall issue, so I would check that first.
Frode

Complex Problem with Time Capsule and Network

I have setup an airport network based on a 500 gb Time Capsule which for about a year was working perfectly. Last days some problems came up. The network is shared to 2 different macbooks pro. The first macbook pro works perfectly, the internet connection is stable and fast. The other macbook works weird: Although it finds the network the internet speed is very slow and not stable. Also it can't backup on the time capsule as it used to do (msg: can't find the server). Ι have the same network settings for both the macbooks pro and I had several times restart and reset the time capsule.
Thanks in Advance
Costas

I suspect that you are using someone else's airport connection. That would let you access the internet, but not access your file server. go to the airport menu and make sure that you are using your airport connection.
If that does not work, does everything work well when the computer is within a few feet of the time capsule?

Problem with sun outlook connector, Microsoft LDAP services

Dear All
I have big problem with sun outlook connector and I can find any way to fix the problem,
I am using sun java system connector deployment to create installation script for my clients.
in the tool I have specify the location of Microsoft LDAP services, I am using outlook 2003 and sun say this option is not needed for outlook 2003, if I try to create the script and run the script on target client I will receive below error,
I tried the office CD-ROM as path for LDAP services but the outlook connector says there is no LDAP services on the CD and I receive same error,
19:02:29 [5365] Outlook version is 11.0.5608.0.
19:02:29 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
19:02:29 [5475] TMP directory is 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp'.
19:02:31 [5362] Checking Windows version.
19:02:31 [5363] Windows version is 5.1.
19:02:31 [5364] Checking Outlook version.
19:02:31 [5509] Checking default mail client.
19:02:31 [5508] Default mail client is 'Microsoft Outlook'.
19:02:31 [5178] Verifying that Outlook is not running.
19:02:31 [5179] Trying to login to shared session.
19:02:31 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
19:02:32 [5502] Upgrading the Sun Java System MAPI Service Providers.
19:02:40 [5370] Finished installing Sun Java System MAPI Service Providers.
19:02:40 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
19:02:40 [5367] Sun Java System MAPI Service Providers are installed.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:41 ERROR: Microsoft LDAP Directory MAPI Service Provider must first be installed.
Best regards
Mo

This is likely to depend on the version of the OC you have. The released one isn't supposed to work with Outlook 2003. Please contact Tech Support for the latest version and help.

Problem On Sun Netra 210 Network

Similar Messages

Maybe you are looking for