Problem on using batch file

Hi,
I have an application which reads data from a text and writes them to a database. I should use batch files in my project to work classes with double clicking on them. Java application reads path of the text file from a properties file. I used relative paths like that " ..\\data\\records.txt" for text file path . But my problem is that; when I run application normally it executes. But when I tried to run it from batch file placed build folder(under project folder) it does not work. Because it tries to find the data folder under the build folder. But data folder is under parent folder of build folder. My batch file code is like that :
SET PATH=%JAVA_HOME%\bin;%PATH%
SET LIB_PATH=..\lib
SET CLASSPATH=%LIB_PATH%\mysql-connector-java-3.0.17-ga-bin.jar;..\bin;..\
java.exe yega.timesheet.MainApplication ..\\configuration\\properties.props
pause
Which statements should I add(and where) to make this batch file search for data folder under its parent folder... Please help me.
Thank you.

Thanks Paul, but I tried to use cd before running program. I added "cd .." or "cd ..\" lines to batch file but they didn't work. I decided to use absolute path instead of using relative paths. I also found one more solution. I can put a properties file in build too. And define text path as " ..\\data\\records.txt " in this properties file.
Also I need to use "\\" because "..\\configuration\\properties.props" is the input for args...

Similar Messages

Call ggsci using batch file from windows- get error

i create a script to use ggsci, start manager, extract and replicat.
i have success doing this in my linux.
here is one of my script : start_ext1.sh
cd /u01/app/oracle/ggs
./ggsci <<EOF
start manager
start ext_s
exit
EOF
clear
i have an error when i do this using batch file from windows.
here is the batch file :
@echo off
cd C:\putty
plink.exe -ssh -2 -P 22 [email protected] -pw oracle "./start_ext1.sh"
every time i try to enter ggsci when i run that batch file, i get this error :
./ggsci: error while loading shared libraries: libnnz10.so: cannot open shared object file: No such file or directory
i didn't get this error when i run the script in linux.
is there anybody can help me?
thanks a lot!

problem solved!
add : . ./.bash_profile before enter ggsci.
it's worked! :)

How to use batch files to send the load from ODC to UCM?

Hello all.
We're trying to do this along this week and, until now, we couldn't figure out how to use batch files containing metada on ODC and commit the output files to UCM.
So these are our specs:
VM 1
ODC - 10gR3
OS - Windows XP 32 bits SP3
DB - Oracle DB 11.2
VM 2
No ODC
UCM 11.1.1.6
OS - Enterprise Linux Enterprise Linux Server release 5.5 (Carthage)
We've opened a ticket with Oracle Support to know how we should do this. The number is SR 3-6108348211.
Let me try to explain what we want to do:
1 - we have a batch file with all metadata of many files from UCM
2 - we want to use this file in ODC, so the application will convert the images and commit them to UCM
3 - we should see all these files, their metadata, thumbnails and related content in UCM
4 - this is a batch file example we want to send to ODC:
@Properties LocalData
IdcService=CHECKIN_UNIVERSAL
dRevLabel = 1
primaryFile=/tra/Relatorio_UHPF-03-04-2008-M-RL-EA.pdf
dDocName=TRA_33
dDocTitle=UHPF-03-04-2008-M-RL-EA
dSecurityGroup=MAM_TRA
dDocType=Document
dDocAuthor=luis.neotropical
dInDate=14/05/08
xC_CLASSIFICACAO=EA - Educação Ambiental
xC_DATA=01/04/08
xC_DATAVALIDADE=30/04/08
xC_LOCALIZACAOFISICA=N/D
xC_USUARIO_DEP=LUIS FERNANDO DA CAMARA
xC_TIPO=RL - Relatório
xC_USINA=UHPF - USINA HIDRELÉTRICA PASSO FUNDO
xC_FICHA=MAM - Relatorios Ambientais
xC_IDDOCMAN=TRADocID=157
xC_IDANEXODOCMAN=TRAFileID=33
xC_DESTINOINICIAL=Tractebel
xC_ORIGEM=Neotropical
xC_FORMATODOCUMENTO=Digital
xC_GENERODOCUMENTO=
xC_DOCPRINCIPAL=Sim
@end
<<EOD>>
5 - So, when we use this batch file on ODC, the file (or image) will be converted, all metadata attached and then sent to UCM.
But we don't know how to do the link between ODC and UCM. The Oracle Support says it is necessary to do some customization. In the books I could not find any info about how to do, just generic information or how to use ODC.
Is there a way (without customization) to do that? Can anyone give us a step-by-step guide?
Thanks for all help and guidance.
Fernando

What is the one-sentence requirement or issue you're trying to solve?
If you only want content to be converted to pdf, then you should already have that with your items checked into UCM (if you have IBR enabled).
if you really want to feed content into ODC using a batchfile, my first thought would be to create a transformation utility/app that will convert your batchfiles to the expected ODC import server folder job format. then you'll have to move or map the content to match.
Again, without knowing the exact issue/business requirement you're trying to work through, I'd say a redesign of your ingestion process may be in order.
If you feed content directly into ODC through any supported ODC method (watch folder, email, scanner, fax, etc), then you'll be able to use everything ootb as you'll be able to auto-commit directly into UCM or add an indexing step and manual commit to UCM.
ODC is basically a front end for indexing and extra ingestion options to your content repo.
IPM is basically the same, but it includes some extra process-related details (process metadata, process integrations/bpel/bpm, other system integrations/ebs/crm, etc). I don't feel that IPM would help with the transformation-specific question you've put out there.
-ryan

Two problems in using LKM file to sql

hi all,
i met two problems during use "LKM file to sql" for loading data from csv file to oracle db. please try to help me, thanks a lot!
my environment:
os: win 7
odi version: 11g
The 1st condition is: in the 10th step of the execute session, a table called ".SNP_CHECK_TAB" which could not be created in oracle will be created!
If i modify it to SNP_CHECK_TABLE, the step will pass...
why naming table like this?
create table .SNP_CHECK_TAB
     CATALOG_NAME     VARCHAR2(100 CHAR) NULL ,
     SCHEMA_NAME     VARCHAR2(100 CHAR) NULL ,
     RESOURCE_NAME     VARCHAR2(100 CHAR) NULL,
     FULL_RES_NAME     VARCHAR2(100 CHAR) NULL,
     ERR_TYPE          VARCHAR2(1 CHAR) NULL,
     ERR_MESS          VARCHAR2(250 CHAR) NULL ,
     CHECK_DATE     DATE NULL,
     ORIGIN          VARCHAR2(100 CHAR) NULL,
     CONS_NAME     VARCHAR2(35 CHAR) NULL,
     CONS_TYPE          VARCHAR2(2 CHAR) NULL,
     ERR_COUNT          NUMBER(10) NULL
The 2nd condition is: i want to filter out certain name in the source table and the filter string is "BRE.name!='some_value'".
When I clicked the "Testing query" button, the following error shows:"Error while executing query Invalid format description".
It works well when the source db is oracle, why not file? Is there any format for the filter string in file? I don't think so...
Jun

Hi Jun,
Can i contribute a little for ur 2nd problem.
This error is coz, If u are using a filter against a File "data store" u can't test it, only against RDBMS query will be tested at data store level.
Well, for using that filter and make sure its working, drag and drop the source file in the interface (u can get the filter) and make it to execute on STAGING.
Thanks,
Guru

Rman backup fails on windows when using batch file

Hello Gurus ..
I am trying to setup incremental backup on my windows OS based server using RMAN command in batch file. When I use batch file in OS scheduler it is working fine, when I am calling same batch file from my LOCAL desktop PC it throws errors as below.
D:\> \\3.193.211.19\sgdba\rman\bkp_acressit.bat
D:\>rman catalog rman/******@acressit target / cmd
file=E:\sgdba\rman\bkp_arch.rcv log E:\sgdba\rman\sit_arch_rman_backup.log
RMAN-00557: could not open MSGLOG "E:\sgdba\rman\sit_arch_rman_backup.log"
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00556: could not open CMDFILE "E:\sgdba\rman\bkp_arch.rcv"
Contents of the batch file and RCV file as below:
Batch File:
rman catalog rman/*******@acressit target / cmdfile=E:\sgdba\rman\bkp_arch.rcv log E:\sgdba\rman\sit_arch_rman_backup.log
RCV File:
RUN {
ALLOCATE CHANNEL ch1 TYPE
DISK FORMAT 'E:\ORA_RMAN_BACKUP\ARCH_%d_%u_%s_%p';
BACKUP ARCHIVELOG delete input;
RELEASE CHANNEL ch1;
EXIT;
--------------------------xxxxxxxxxxxxxx------------------------
* on my DB server I am login using my administrator account, on my PC I dont have admin account.
* I have checked remote execution using local user as well as admin user.
* I have checked the permission and my local ID & EVERYONE has all permission in that folder.
Any help will be appriciated.
Thanks & Regards
Ashish

Ashish wrote:
hi Atil,
u have guessed it correctly, I came to know that issue later I copy file on local PC and it works fine.
Now I am working on netbackup server. I want to use the same script to initiate backup from netbackup server. Do you have any idea or any guidelines from you will appriciate.
Thanks
AshishAshish,
Is it "symantec's netbackup"? I do not know that product and if it has an option to enter your own RMAN scripts. On the other hand, it should be able to create irman scripts according to your backup job definition.
Regards
Gokhan

Run Form using Batch file

Hiii
how can run a form using batch file (.bat) .. .
???

i forget to say that am using Developer 10g R2 ...
another question is what should i start when using the batch file other than the
OC4J instance .....

Problem wiht Running Batch File using Runtime.exec()

I am writting one program which will create a jar file using a windows Batch file.
The main program is in the folder "d:\CmdExec.java".
The other one to which a jar file to be created is in the folder "e:\folder\HelloWorld.class"
The contents inside the "e:\folder" are
e:\folder\HelloWorld.class
e:\folder\mainClass.txt
e:\folder\run.bat
The mainClass.txt contains "Main-Class: HelloWorld"
The Run.bat file contains "jar cmf mainClass.txt HelloWorld.jar *.class"
The coding for CmdExec.java is as follows
import java.io.*;
import java.awt.Desktop;
public class CmdExec {
public static void main(String argv[]) {
try {
Desktop desktop = null;
if (Desktop.isDesktopSupported()) {
desktop = Desktop.getDesktop();
desktop.open(new File("e:\\folder\\run.bat"));
catch (Exception err) {
err.printStackTrace();
When i double click the file e:\folder\Run.bat, it will create a jar file for HelloWorld.class.
But, i want to create that jar file using the java program CmdExec.java.
When i run CmdExec.java, the batch file is opened. But it shows error as "Can't find the specified file"
But when i copy the following files to "d:\",
e:\folder\HelloWorld.class
e:\folder\mainClass.txt
the jar file is created using the CmdExec.java.
But,
e:\folder\HelloWorld.class
e:\folder\mainClass.txt
these files should be in the folder"e:\folder" only.
Can anyone Help me this Problem?
Or Anyother way for creating a jar file for one program by using another program?
Help me soon.............

Try this. It's not running a bat file. You can say it almost is a bat file.
import java.io.*;
import java.util.Scanner;
public class CmdExec {
    public static void main(String argv[]) {
        try {
            Process p = Runtime.getRuntime().exec("jar cmf mainClass.txt HelloWorld.jar *.class");
            Scanner s1=new Scanner(new InputStreamReader(p.getInputStream()));
            while(s1.hasNextLine())
                System.out.println(s1.nextLine());
            p.waitFor();
            System.out.println(p.exitValue());
            if(p.exitValue()==0)
                System.out.println("Okay");
            else
                System.out.println("Error");
        catch (Exception ex) {
            ex.printStackTrace();
}Run it in the same folder as mainClass.txt
Edited by: ColacX on Aug 1, 2008 10:35 AM

Pass tablespace(s) as a parameter to RMAN using batch file (windows2000)

I want to make a backup of one or more than one tablespaces.
For Example:
Backup tablespace USERS,TOOLS;
Backup tablespace USERS;
In this regards I am using windows batch file. Below you find the code of batch file which I am using to perform this operation (windows 2000)
Batch file (c:\rman.cmd)
set tbs1=%1
set tbs2=,%2
if exist tbs1 == goto usage
if exist tbs2 == goto usage
echo BACKUP tablespace %tbs1% %tbs2% ; > c:\temp\tbs.rman
rman TARGET / @ c:\temp\tbs.rman
Problem
I run this batch file on command line .
When I issue this command its ok and backed up both the tablespaces.
Host @c:\rman.cmd USERS,TOOLS
But when I want to backup only one tablespace and issue the command like that:
Host @c:\rman.cmd USERS
It gave the following error
BACKUP tablespace users , ;
Found comma after first tablespace.
Point of focus
How to get rid of the comma after first tablespace on run time, when I want to backup only one tablespace.
BACKUP tablespace users , ;
How to avoid that comma on run time when I only want to make a backup of single tablespace.
Please check this matter it is only the batch file side problem.
With Best Regards
Fawad Ahmed

I am not expert is DOS but I think you can fix this with
a simple programming logic elements in the script.
You have 2 cases:
1 case ) When you have only one parameter
2 case ) When you have more or equal than two parameters
if exist tbs1 == goto mark1
if exist tbs2 == goto mark2
mark2:
echo BACKUP tablespace %tbs1% %tbs2% ; > c:\temp\tbs.rman
goto end
mark1:
echo BACKUP tablespace %tbs1% ; > c:\temp\tbs.rman
goto end
end:
rman TARGET / @ c:\temp\tbs.rman
This can be one the case for 1 or 2 parameters . If
you think to pass more parameters you have to use
another logic.
I hope this can help you!
Joel P�rez

Use batch file to determine if computer is a terminal server

Hello experts,
I am trying to create a batch file that I can use to install MS Office 2013 and another software on Windows Server 2003 R2,
Windows Server 2008 R2, and Windows Server 2012 terminal servers (Remote Desktop Services) via GPO. The installation files are NOT
"msi" files. Can you please tell me how I can use command line in a batch or script file to determine if a machine is a terminal server or not? I tried the Change user /query command on a Windows Server 2008 R2
terminal server and a Windows 7 machine and both machines returned the following status
Application EXECUTE mode is enabled.
which will be a problem because the installation batch file would treat the Windows 7 machines as a terminal server when it's not really a terminal server.
Basically, I want the batch file to check to determine if the machine is a terminal server. If it is a terminal server, then it would run change user /install, install the software, reboot server, then run change user
/ execute. Your help will be greatly appreciated.

Hi,
For Office 2013 there should not be any concerns since it is windows installer based and things will be handled automatically. For the other software you could simply put the session in install mode in every case. For the servers/workstations
where install mode doesn't apply the change user /install and change user /execute will simply fail without any harmful effects.
You may check whether or not the machine is a terminal server using WMI, for example:
wmic /namespace:\\root\CIMV2\TerminalServices PATH Win32_TerminalServiceSetting Get TerminalServerMode
0 = Remote Administration mode (not a RDSH/TS)
1 = Application Server mode (aka RDSH/Terminal server)
-TP
When I run the command from the command line, it works, but when I try it in a "IF" statement, nothing happens. I am I doing something wrong using the wmic code in the IF statement?

Installing Windows Updates Manually by using Batch File

Hi
i'm having a computer lab of Windows XP SP3. I want to create batch file so that i can maually installed updates by just clicking the batch file in every pc of computer lab instead of using WSUS or Windows update directly on all computer.
Regards,
Devang Patel

We use
BatchPatch for this sort-of thing. You should take a look at it to see if it solves your problem.

How to delete a file by using batch file

hi
i tried for deleting a file from batch filr in Linux environment.
it is working when i run batch file thruogh command line.
but its not woking through program.
i am sending tha code that i used in tha program.
First i have to create the file and send the information to that file
and the content from taht file after that i have to delete the file.
For that i wrote code but the batch is not woking.
Batch file
@echo off
rm filename
Actual Program Code
I used RunServer
public class RunServer extends Object
RunServer();
String cmdServer = "test.bat";
Runtime run = Runtime.getRuntime();
Process p = null;
try
p = run.exec(cmdServer);
catch(IOException e)
System.out.println("Error:"+e);
By using RandomAccessFile i am creating a file
please help me
Thankyou

1) You can't execute a batch without having a shell.
2) It's totally stupid to run a one-line batch file from system.exec.
3) It's also totally stupid to delete a file using Runtime altogether.
But there you go...

CREATE MULTIPLE TABLES USING BATCH FILE OR ANYOTHER MODE

Dear Legends,
I want to create Multiple table at a single stroke in oracle sql developer or sql*plus using any mode like batch file or sql files...
I dont know the exact mode and how to create it please guide me..I want to learn more about this since am a DBA Beginner..
Any kind of help would be appreciated more...Thanks in Advance
Regards,
Karthik..

Hi Everyone,
According to your suggestion I did everything and all works fine yesterday... But today the same script.bat file is not opening sqlplus...
as soon as I double click the bat file it opens the prompt and it shows upto the copyright ..oracle all rights reserved. sql> prompt is not visible or upto that it strucks... please help me..
My SCRIPT.BAT
@echo off
set ORACLE_SID=VESS
set PATH=%oracle_home%\bin\
sqlplus scott/tiger@VESS @test.sql
echo "Disconnected"
My test.sql
select * from tab;
Please help me...
Regards,
Karthik..

Delete folder in a particular scenario using batch file

How to achieve this using a batch file?
The batch file should check if inside this folder "c:\test\", a directory named "temp1" only is present. If so then delete the folder test, but if the folder test contains more directories and files other than "temp1" directory, then just remove the "temp1" directory alone.
Regards,
Mathan

First, why are you asking about this in a LabVIEW forum? I would suggest starting with Google.
Second, you could simplify your algorithm by deleting temp1 and then checking if the test dir is empty or not. The Windows command is rd, if memory serves, but I believe that doesn't work on non-empty directories, so you might need to add switches to it or use another command. You could probably even simplify it by trying to delete test and letting it fail, so something like this:
del c:\test\temp1\*.* (add switch for quiet mode).
rd c:\test\temp1 (and check if there is a recursive switch)
rd c:\test (should fail if not empty).
Try to take over the world!

Remove odbc system dsn using batch file and odbcconf

I create user system dsn entries by using a batch file and odbcconf call. I've found references here on how to do that, yet cannot seem to find any results on how to remove them using that same call. The library information (http://msdn.microsoft.com/en-us/library/ee388579(VS.85).aspx) states add and modify a system dsn for configdsn and configsysdsn and references equivalent to SQLConfgDataSource function. (http://msdn.microsoft.com/en-us/library/ms716476(VS.85).aspx) but the config data source function has a a removal and this doesn't seem too.
Apologies for being obtuse, but I can't seem to locate it. Any links to how this is done from a batch file are much appreciated.
Regards,
NR.

John C is basically correct, you can remove a System ODBC data source via the registry, but there is apparently no way via odbcconf.exe. That is of course really stupid and poor programming!
John, however, forgot another important registry entry. That key deletion he mentioned will disable the odbc connection, but not remove it entirely. If you just do that and then open the "ODBC Data Source Administrator", you will find the
connection is still listed, but you can't remove it or modify it. It becomes completely screwed up! There is a value to delete as well which dictates if the connection is listed. Consider it the "header" to the data source.
Also, in Windows 2003 and 2008 at least, the registry key John C listed is not quite the location to modify either. This is where to find them in those OSs:
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\%DSN%
or
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ODBC\ODBC.INI\%DSN%
The "header" I reffered to is a string value in inside a key (not the whole key!)
HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\ODBC Data Sources
or
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ODBC\ODBC.INI\ODBC Data Sources
The string value is the data source name. This entry must be removed to remove the data source listing entirely.
Here are some batch snipets for creating and then removing an odbc data source. I'm leaving out some premiliary chunks, but you can figure it out from here. If you can't, you probably shouldn't be messing with this stuff in the first place!
In these scripts, I create and remove a 32-bit data source in either a 32-bit or 64-bit version of windows. The windows folder variable gets set to either "C:\Windows\System32" or "C:\Windows\SysWOW64" depending on the os. In case you didn't
know, on a 64-bit machine there is are also 2 differrent versions of the "ODBC Data Source Administrator" gui tool and the data source lists differ (32-bit vs 64-bit lists). The 32-bit version on a 64 bit OS is found at "C:\Windows\SysWOW64\odbcad32.exe".
The one in the start menu will load the 64-bit version so you will never find your 32-bit connections there.
Note - for simplicity I use the database name as the user name and and the data source name as well (in case there was any confusion).
Create the connection like so:
echo Creating 32-Bit System ODBC Connection "%DatabaseName%"...
"!WindowsFolder!\ODBCCONF.EXE" CONFIGSYSDSN "!ODBCDriver!" "DSN=%DatabaseName%;Server=localhost;Port=3306;Database=%DatabaseName%;UID=%DatabaseName%;PWD=%DatabasePassword%"
And then remove it like this:
echo Removing 32-Bit System ODBC Connection "%DatabaseName%"...
if "%WindowsBits%"=="32" (
If Exist "!TempRegFile!" Del "!TempRegFile!"
echo Windows Registry Editor Version 5.00>>"!TempRegFile!"
echo.>>"!TempRegFile!"
echo [-HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\%DatabaseName%]>>"!TempRegFile!"
echo [HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBC.INI\ODBC Data Sources]>>"!TempRegFile!"
echo "%DatabaseName%"=->>"!TempRegFile!"
regedit /s "!TempRegFile!"
) else (
If Exist "!TempRegFile!" Del "!TempRegFile!"
echo Windows Registry Editor Version 5.00>>"!TempRegFile!"
echo.>>"!TempRegFile!"
echo [-HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ODBC\ODBC.INI\%DatabaseName%]>>"!TempRegFile!"
echo [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\ODBC\ODBC.INI\ODBC Data Sources]>>"!TempRegFile!"
echo "%DatabaseName%"=->>"!TempRegFile!"
regedit /s "!TempRegFile!"
If Exist "!TempRegFile!" Del "!TempRegFile!"

AUTOMATION OF IMPORTING USING BATCH FILES...!

Hello Everyone!
I want your help on this matter. Actually I am trying to get data( in the form of XML) from BI into MDM SP04.
I want to automate the import process. i have saved the map and defined a port in the console and given the map name for the port.
now i configured the INI file present in the import manager batch.
I read somewhere that to run the importmanagerbatch.exe file i need to create a batch file having info about the INI file and then run the batch file which will execute the .EXE file.
But after doing this still data is not cmg in the repository.
Can anybody list me down all the required steps to automate importing. N can more than 1 map be taken care of in the console? or probably for every map we will have to create new ports for them?
I am totally confused....... please help me out.
Thanks and Regards.
Nitin jain.

Hi, Nitin,
The Import Batch can handle any number of maps in one batch process. It does have a limitation that the batch ini file will only reference 1 import file. But that file can contain any number of records and different table data.
I have used the Import Batch (only useable on Windows) for importing multiple check table data into the repository. In the dat file, I used the following code for each map. This is the code for the Partner Function.
:: IMPORT MAPS
cd "C:Program FilesSAP MDM 5.5Import Manager Batch"
@echo . STARTED Map: "Partner Functions" %DATE% %TIME% >> "C:MDMImportReport.log"
@echo Executing Map: Partner Functions
ImportManagerBatch.exe /INI "C:MDMMdmImportCheckTables.ini" /CLIENTSYSTEM "R/3 4.7" /MAP "Partner Functions"
            /LANGUAGE "English [US]" >> "C:MDMImportReport.log"
IF errorlevel 0 (echo . Completed successfully. >> "C:MDMImportReport.log")
           ELSE (echo . FAILED with error code %errorlevel% >> "C:MDMImportReport.log")
IF errorlevel 0 (echo Completed successfully - %TIME%) ELSE (echo FAILED with error code %errorlevel%)
@echo . Ended Mapping: "Partner Functions" %DATE% %TIME% >> "C:MDMImportReport.log"
@echo .   >> "C:MDMImportReport.log"
I then repeated this code in the batch.dat file for each map used. In total I had 93 maps.
Kristin

Problem on using batch file

Similar Messages

Maybe you are looking for