Problem opening a project after is saved

Hi guys;
I'm not sure what I'm doing wrong here.
I record all my tracks (drums, bass, a few guitar tracks, etc...)
Then I'm done and I save it to a folder in logic. Great.
But when i re-open the project, only the drum track is in the arrange window. I have to go and hunt down the other tracks and drag and drop them into the window and sync it up again.
Clearly I'm missing something here.
Any and all help would be greatly appreciated.
Drew

Hi Drew,
Go to 'Save As' in Logic and Tick Include 'Assets…'
Click on the 'Disclosure Triangle' below that and 'Tick Any Boxes' that are relevant to your Project.
P 184 of the User Manual for more Info…
HTH

Similar Messages

HT203477 Can't open my project after FCP X 10.0.7 crash

Can't open my project after FCP X 10.0.7 crash. Backup file is missing, Autosave Vault too. Pro Maintenance Tools does not fix the problem. The event and media are ok. I have crash log and CurrentVersion.fcpproject. Please help, it's very big project.

And here are the last crash logs if it can be of any help:
Plugin
This crash appears to have been caused by a plugin.
Relevant Line
0 com.apple.FxPlug.provider 0x000000011a296640 0x11a28b000 + 46656
And the next one is:
Corrupt Project
This crash seems to have been caused by a corrupt project file. You can attempt to repair the project with Project Repair, but you will most likely need to restore from a backup or autosave (note that the corruption may have spread to recent autosaves).
Relevant Line
13 com.apple.DeepSkyLite 0x0000000101958bf3 -[DSStore prefetchData:] + 437
and the next one:
Corrupt Project
Background exception: '*** -[NSKeyedUnarchiver initForReadingWithData:]: incomprehensible archive (0x62, 0x70, 0x6c, 0x69, 0x73, 0x74, 0x30, 0x30)' --> { (

Problem opening my project on adobe premiere element 10.

When I try to open it it says: Cannot open project because some file are damged or are obsolete. Does someone have any advice on what I could do?

Thank you, problem solved. A corrupted photo , thanks
Envoyé de mon iPad
Le 2014-04-17 à 21:08, "A.T. Romano" <[email protected]> a écrit :
Re: Problem opening my project on adobe premiere element 10.
created by A.T. Romano in Premiere Elements - View the full discussion
berthiaumes
What computer operating system is your Premiere Elements 10 running on?
Please review the following Adobe document on damaged project, if you have not already.
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-proje cts-premiere-elements.html
We will be watching as your discussion with SB moves forward.
Thanks.
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6308980#6308980
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6308980#6308980
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6308980#6308980. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Error opening a project after i have saved it

The following is the error I recieve after I have saved a project and try and reopen it. It does not matter if I close Premiere Elements v7 or if i try and reopen the project right away. I get the same error. "Projects created with Adobe Premiere Pro and Adobe Premiere Elements are not compatible. Please use the appropriate application to open this project." I only have Adobe Premiere Elements on my computer. HELP!!!

Kay,
The biggest problem that any academic "lab" faces, with the use of either of the Adobe NLE (Non Linear Editing) application is that they do not work well, when one is fully networked, or when users are not set to "administrator."
Because both Premiere Elements and Premiere Pro are such great teaching tools, it would be great if there was an easy solution for this. Many professors have asked similar questions, and I have never seen a definitive answer. Some shcools have been able to configure things, so that they work to some degree, but I've yet to see a post back, with the exact details. This is something that I would definitely contact Adobe Support Technical Support with. There could well be simple workarounds, but details of these is sorely missing in the fora. From a general user's standpoint, the answer is usually, "can't be done," or "only if all users have administrative rights," etc. That is because we know many of the limitations of the programs, but have never been faced with a situation like yours, or the other professors. To be blunt - we just do not know.
I'm not at all familiar with the two programs/schemes that you mention, so I cannot comment on the viability, or the settings of either. I hope that maybe one of the professors, who has been successful, will chime-in with some good suggestions for you. In the meantime, I would definitely ring up Adobe Technical Support. TS for installation issues, and that is what you have, really, is free. Please do report back with how they helped you to do, what you need to do. You will likely help a teacher, and probably soon.
Wish I had better news, and a quick-fix for you, but I do not. Maybe Steve, or another user, has some tidbits that might help. Unfortunately, the closest that I have come to running an Adobe NLE in a networked environment is having some media Assets on a NAS. Though all of my computers are on a p2p network, each Adobe program is local, and I am the only user and have full administrative rights on each machine - no use to you and your situation.
Sorry, and good luck,
Hunt

Big problems opening a project

Hi all,
I've been working on an iMovie project which is about 1 hour long. Everything was going fine until yesterday, when iMovie froze inexplicably (actually, just after I had readjusted the audio levels for a soundtrack), and I had to force quit and start again. Now the project is really slow to open (it takes 10-15 minutes just to open), and even after then, it's unusable because I have the spinning wheel displayed almost all of the time. To get the project to where it is I put in many hours of work and am reluctant to just start again so I'm wondering if there is some way to still salvage this project.
I can open other projects in iMovie without any problem by the way. Any suggestions what I can do?
thanks,
David

Thanks John.
+1. Try making a copy of the project (using Finder, not in iMovie) and opening the copy. Low probability of working, but you never know.+
Yeah, I don't hold out too much hope of that working either but I'll give it a go.
+2. If you can get into the project, try exporting it as a full quality .dv file. That will take quite a while, and when you are done, all of your transitions, titles, etc. will be incorporated into a single file. You can then drop that file into the Media folder of a new iMovie project and finish editing. Your new iMovie will have only one, giant clip. You can search through it and split the clip at any point to do your editing. I have done this before, and it gets rid of all of the problems of the old file.+
That sounds like it might work, if only I can get the spinning wheel of death to stop turning long enough to execute the command.
I wonder if there is anything to be gained by opening the package itself, and trying to extract the raw media files...

Imovie won't open any projects after upgrading to yosemite

Can anyone help? I upgraded to yosemite and imovie 10.0.6 and now imovie won't open. IPhoto and Garageband open just fine. After clicking Imovie, it appears in the menu bar but all options from the drop down menus are grayed out. I cannot open any projects and there is no imovie window opening. I have tried deleting and reinstalling the program twice with the same result. Any suggestions? Thank you.

Apple introduced a new document architecture with Pages v5, that is not backwards compatible with Pages '09. With Pages v5.5.2 (Yosemite) installed, a simple double-click on a Pages '09 document will default open it in Pages v5. Once you save, or Pages autosaves this document, it is no longer directly compatible with Pages '09, without first exporting it to Pages '09 format. Pages v5 documents do not contain index.xml files, and Pages '09 documents do.

Help!! About 20min to open a project after some crashes...!!

Briefly:
- Working in a project with about 10 audio instruments and 10 audio tracks
- "Multi-thread plugin seems to cause a problem"
- logic crashes and autosave the project
- reopen the project, unload the plugins that "caused" the problem
- save the project with new name
- open the project, thinking everything it's going to be fine, and...
- impossible to open the project normally!!
When opening, some exs instruments are loaded. One of them seems to hang logic. Several times forcing quit, trying to kill some processes in activity monitor, etc. Nothing. Last time i was browsing internet while logic was "working" in loading project and suddenly the project has loaded! 20-30 mins have gone since I'd opened the project! What's up?! Someone can help me?
What i'm going to do right now is to create a new empty project and copy one by one all my tracks. I hope this tedious and dirty solution will "solve" my present problem, but I'm terrified about working in the future with a more complex project (with tempo changes, folders, automation data, audio regions, etc). This present solution will be impossible to go ahead.
Any suggestions? Is there some way to "reset" a project or to load it without some audio-instrument settings? I think there was a way to import selectively layers from a project into another one.
thank you!

Aha!! It worked!! Thanks sampleconstruct!
Also useful information to those with these (non desirable) problems:
1. With activity monitor i could see the last opened files with logic, and it can be useful to know where logic is hanging.
2. i detected there was some problem with an audio unit and i was going to deactivate it with au manager, when...
3. sampleconstruct told me the good idea of disabling core audio and purge then the project.
cu for better items.

I can't open my project after HP Photo Creations update.

Hello.
After updating to a new version of HP Photo Creatinos i can't open my project. I created it in old version and when i try to open it in a new version of HP Photo Creations - it's nothing happens. It doesn't open my project and no any message shown... How can i open my old project in a new version?
Regards, Dmitry.

Hi Dmitry.
Please send more detail to our support team at [email protected]
Which type of project was it?
Mac or Windows?
Does this affect all projects?
Thank you, RocketLife
RocketLife, developer of HP Photo Creations
» Visit the HP Photo Creations Facebook page — news, tips, and inspiration
» See the HP Photo Creations video tours — cool tips in under 2 minutes
» Contact Customer Support — get answers from the experts

Can't open my project, after Animate crashed

Hi!
After Animate crashed with error, I can't open my project. I have the following error message, when trying to open it:
"Loading Failed, please check your page for JavaScript errors".
I'm using Animate v.2014.1 under Win7.
Does anybody knows, how to deal with it, and restore my files?
Thanks!

As far as I can see, EA doesn't allow the user to create items with the same name. If you try to create an identical name, for instance in renaming, it reverts to the previous name.
So how in the world can this even happen?
And so how can I correctly comb the code to fix it?

Problems Opening iMovie Project in Final Cut Pro

We created a 12 minute Video in iMovie for a client last year (basically starting Video editing as an experiment). However because they now want a multilingual DVD version we've decided to take the plunge and invest in FC Studio, thinking it will be able to open the project and allow us to add the additional audio tracks.
However, on opening the iMovie project in FCP, a lot of the clips along the timeline are missing, and the few clips that have transferred successfully seem to have spread themselves over 5 or 6 hours with huge gaps between them.
Are we doing something wrong? Final Cut Express seems to have a seamless upgrade path, does Final Cut Pro not have this ?
We don't really want to remake the whole video in FCP if there is a way of just importing the iMovie project.
iMac 20" G5 Mac OS X (10.4.8) Using latest FCP and iMovie

Thanks everyone for your help.
I've just finished the project. As Steve mentioned I didn't actually need to add the audio tracks in FCP, in fact after adding them to Sound Track Pro and adjusting the volume I then realised they needed to be exported from there and added as separate tracks to DVD Pro. (everything has a timeline)
I used FCP to superimpose a new sequence and a logo to the top corner, I'm getting more comfortable with the programs now.
I think I've got my head around what application does what now, and have established a better work flow.
Once again thanks for your help.
PS. I get the feeling FCP is a slightly older program than iMovie or any of the other applications. The lack of live scrolling and audio wave forms (in the timeline) gives me that impression. But the whole FC studio an amazing piece of software, don't think I'll ever look back.

Problem opening Logic projects

I've just done a fresh install and I'm no longer able to open projects with Logic Express 8. If I click File > Open... > Logic > (Example) > ... The project is greyed out, yet I can open them from Finder with no problems at all.
Does anybody know what may be causing this and how I can resolve it? It's not too worrying, but is quite a pain! Logic Express seems to become more inconvenient each time I do a fresh install of everything - I'm no longer able to access Nexus2 from Media > Library either...

If you open the project from Finder, then do a Save-As to a new project name, can you then open it in LE8? If this works, rename the Logic folder to something like LogicOld, then create a new Logic folder. Open each project from finder, then save as each project to a new project in the new Logic folder. When you are happy, delete the old folder (or back it up just in case). Does anyone else have a problem with this suggestion? It should work, don't you think?

Problem opening old projects

I just upgraded my Mac to Tiger and Final Cut Studio 5.1.2 from my 4.5. I keep trying to open a project in 4.5 and when I go to update the project to open it up. FCP Studio keeps crashing. I dont' want to lose my project and don't know what to do. Any help here?
Victor

One method would be to export the project as an XML from FCP 4.5, then import that into 5.1.2 - another method might be to open the project up first in 5.0, then save it (to a new name), then open that project in 5.1.2
If you don't have those versions around (always back up your app before upgrading), you could zip the project up and email it to me and I'll try and upgrade it...
Patrick

HT202358 problems opening I photo after yosemite upgrade

I have tried to open i photo after loading yosemite and have been asked to download software to 'prepare' the mac for the new i photo version. I have done this and it says it's successfully installed the I Photo library upgrade but I still can't open I p

Did you use the iPhoto Library Upgrader to fix your iPhoto Library? Have you upgraded iPhoto to the latest version for use with Yosemite?

Problem opening jpeg file after saving it from photoshop

I have been using Adobe Photoshop Elements 4 for years and have had virtually no problems. Today I edited a picture from windows "my pictures" file and after editng it in photoshop, I renamed it and saved it as a JPEG back to the original file. It came in a an unopenable file. What is wrong. Just to note, recently I updated my Norton and used a Norton tech, who took conrol of my computer because of certain issues. She deleted some programs and I am wondering if certain drives were affected. I reinstalled my Photoshop Elements 4 from my softward CD in hopes that would make a difference. It did not. What could be the issue?
kphoto editor

I did it... I figured out the problem. Incidentally, there must have been some formatting changes in photoshop that took place since I last used it with success.
The steps I now took. I opened up one of my JPEG picture files, opened up one of the pics with photoshop, edited it.
1. Clicked save as
2. The box came open as to where to save and I saved as JPG file plus I checked the "as a copy" box clicked OK/save
3. The next window that came up was the JPEG option box and I checked the "Preview box" and save
4. A window came up in photoshop asking if I wanted to save (the edits on the original) I clicked no because I wanted to keep the original as is.
5. I closed out of photoshop and there was my edited picture in "my pictures"
I am so glad that I got this all worked out. Thanks to all of you who tried to help me.

Problem opening a project

Hi!
Had this problem on a V6 system.
Premiere Pro has encountered an error.
[..\..\Src\Clip\Clip.ccp-556], elements
The project could not be loaded, it may be
damaged or obtain outdated
Anyone with a solution?
/Fredrik B

OK, but do you know why it says 'elements'? Was that part of the error line or did you add it?
Regardless, it sounds like you have a corrupt project and going back to the autosave is the right thing to do. Hopefully that doesn't set you back to far. Once you get the project to open successfully, you should probably save as with a new name/location. Or if your timeline isn't too complex you could maybe have success copying all of the assets from your timeline into the timeline of a whole new project. Also, you could try importing the project from a new one. If you ever move to CC you will also have options to import sequences and assets from other project using the media browser. However you do it, the idea is to get the project to pen again and then save it in a steer where it's free of whatever has been corrupting it. That may take some trial and error, since we don;t actually know what's corrupting it, so save backups often.

Problem opening a project after is saved

Similar Messages

Maybe you are looking for