Problem opening Canon 6D RAW even after upgrade today to PS CS6, WinXP-SP3

Givens: PS CS5>CS6 upgrade via $199USD download today, Non-CC upgrade. OS: WinXP SP3, camera: Canon 6D RAW (.CR2 files) and prefer to work on RAWs via Bridge.
Main goal: view Canon 6D files in Bridge, do adjustments, open via ACR into PS CS6 for further work.
My fav workflow for photos is: Bridge>ACR>PS. Just got a Canon 6D camera. So I updated to PS CS6 today and I did go through PS CS6 menu: help>update mechanism for all available updates, which was one round of ACR (and Bridge) updates, no more were offered. That brought ACR from v7.0.0.308 to v7.1.0.354--still could not see Canon 6D RAW files.  I went to Adobe.com and did manual download for ACR/DNG 7_3 but it did not enable Bridge to see my new camera files nor could I open the 6D .CR2 files in PS. Got PS error message about not recognizing filetype, update ACR, etc (which of course I just attempted). (Seems as through PS and Bridge did not know the ACR/DNG 7.3 "existed" IF that is a capability).
Then I tried to install ACR 8.7 from the "Fix your 6D RAW problems page" and got error messages in PS CS6 (perhaps bc I am on 32-bit system). Decided to start from scratch; uninstalled PS CS6 upgrade.
Secondary issue is: Now I have uninstalled PS CS6 and done System Restore to the point just after I downloaded PS CS6 upgrade. I want to reinstall but the installer fails. Support chat told me to download PS CS6 Upgrade again (doing that now), then reinstall.
Solve: Main problem: Be able to work on Canon 6D RAW through Bridge and ACR (prefer NOT to workaround with DNG if possible) At time of writing, as mentioned, I am downloading PS CS6 upgrade again, then plan to reinstall. If that works, then I need steps to update ACR so that I can work on 6D RAWs through Bridge and ACR. Please know that going through Photoshop's Help>Update mechanism does NOT seem to work. Do I need manual updates? If so, please direct me to the correct ones and order of procedure to execute this upgrade successfully.
Many thanks, Paul

Yammer, thanks for the info about Camera Raw 8.3--that is my goal to load PS CS6 Upgrade and update to Camera Raw 8.3  Currently, I am having problems installing PS CS6 upgrade after uninstall. I have used Adobe CC Cleaner several times. It seemed to help, and the installer proceeded further with next try. Then I looked and there was no PS CS6 icons. I have done system restore also several times and am about to try again. It seems that my original PS CS6 upgrade installed, but when I tried to load ACR update, problems arose. Is there a way to remove recent version Camera Raw remnants from my computer. There is no Photoshop CS6 folder and further none for the CameraRaw.8bi for PS CS6. One possible clue: Yesterday I did two upgrades: 1) PS CS4>CS5 via box, then 2) PS CS5.CS6 on-line download non-CC. In one round of update, I saw that PS CS*5* Extension Manager failed to update. Seems unrelated but mentioned here for thoroughness.
Running ACR 8.3 in XP SP3 would be most useful and timely today as I have work to do. Many thanks, Paul

Similar Messages

  • Problems opening documents (zip files, excel) after upgrade to Snow Leopard

    Since upgrading to Snow Leopard I have not been able to open a lot of files. Mainly, zip files and excel documents (which I had no problem opening before the upgrade. It seems that when I save the files down (from my email or whatever) the files go into the "Archive Utility" program, I try to open them from the Finder but they still won't open (or unzip).
    When I go to open an excel document (most likely from a PC user), I get a msg that the file isn't formated for excel. However, before the upgrade to Snow Leopard I had no issue opening this same file in Mac Office-Excel.
    Thanks in advance for your help/advise.
    -Katherine

    Hello Katherine:
    I have not experienced those problems, but I do not receive Excel spreadsheets via E-mail. My Stuffit Expander version is 13.0.2.
    You might want to check your Excel preferences to see if there is a setting that needs to be changed (compatibility?). I use Office 2004 so your version may be different.
    You could also trash preference files to see if something happened during the install.
    Barry

  • Problem Opening Canon 1100d Raw file with Lightroom2

    I have dusted off an old copy off lightroom2 and installed the updates, but It wont import RAW from the 1100D, Jpeg no problem. Is lightroom2 too old? Should it work?
    I get a message saying file not recognised or corrupt.
    Any advice would be greatly appreciated.
    Thanks
    Aaron

    Yes to your "Is it too old" question, I'm afraid. Raw support for that model was not introduced until Lightroom 3.4 (which you can no longer purchase). Your options are either to upgrade to LR5 (assuming your hardware and OS is capable), or download the latest version of Adobe's free stand-alone DNG Converter and use this to convert your Raws to DNG which your LR 2 should be able to read.

  • Scanning problems with Canon Pixma 5300 series after upgrading to newest Macbook Pro

    Are there drivers available for Canon pixma 5300 series for OS X Mavericks 10.9?
    Scanning with my brand new Macbook pro using  OS X 10.9 just isn't working like it used to with my old white Macbook.
    Does anyone have any suggestions?

    Do you have an MG53xx? If so, then a scanner driver for this model is available from Apple so that you can scan with Image Capture / Preview. So if you open Printers and Scanners and select the MG53xx, you should have two tabs - Print and Scan.
    Canon also has a scanning application called MP Navigator available from their web site. To use this application you will also need to download and install the scanner driver for the MG53xx, which should also be available from the same Canon web site.

  • Can't open Canon 6D raw files

    I'm using windows XP and Lightroon 2.7, and am having problems opening Canons 6D RAW files, I can use CS6 but I like LR better.

    You need LR4 to open file from 6D. And LR4 doesn't run under win XP.

  • I cant open Tools in Menu of Mozilla. Even after upgrade and re install.

    I cant open Tools in Menu of Mozilla. Even after upgrade and re- install.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    You can also try:
    * http://kb.mozillazine.org/Corrupt_localstore.rdf

  • Good evening, after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I  loaded Iphoto 9.4.3  with Time machine but I had lost quite a few photos. As a matter of fact, after searc

    Good evening,
    after upgrading Iphoto 9.5 a page opened requiring to upgrade my library. As it did not work out,for fear of losing all my pictures I  loaded Iphoto 9.4.3  with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures. Therefore, I would like to use 9.5 just by by clicking on the icon down my finder and  not by being obliged to open my hard drive.
    Would you please tell me what I should do. Thank you.
    Best regards,
    Robert

    Huh?
    As it did not work out,for fear of losing all my pictures I  loaded Iphoto 9.4.3  with Time machine but I had lost quite a few photos. As a matter of fact, after searching , I found them In Photo library in 'images' on my hard drive. When I double click, 9.5 appears with all my pictures.
    So, you have restored 9.4.3 from Time Machine but can see all your pictures in 9.5?
    Do you have two version of iPhoto on your Machine?
    And if you didn't update the Library, ("as it did not work out,") how can you see things in 9.5?
    So, whatever set up you have is confusing.

  • Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

    Hi
    I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
    Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
    using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
    Thanks Portozzygirl

    More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
    http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
    http://captaindbg.com/how-to-update-drivers-on-windows-7/   (works on win 8 too)
    Wanikiya and Dyami--Team Zigzag

  • Pmessenger kick me out ! even after upgrade the frimware to 5.1.1 !

    Pmessenger kick me out ! even after upgrade the frimware to 5.1.1 !
    i deleted many times and reinstall
    it kick me out when making retrieving the contacts
    but when i close WI-FI the Pmessanger didn't kick me out !
    is it from connection or what ?
    any one face this problem ? and solved ?

    Hello, rohan.kishore.patel. 
    Thank you for visiting Apple Support Communities.
    Battery life can be difficult to troubleshoot as multiple factors contribute to how long a charge can last.  Graphic intensive applications, display brightness and data connectivity are just a few of the items that can cause the battery life to decrease rapidly.  I would need to know a little more information about your usage patterns to give you and idea on how to maximize battery life.  However, here are some tips on how to adjust settings and charge the device that may help.
    iPhone and iPod touch: Charging the battery
    http://support.apple.com/kb/ht1476
    About Batteries
    About iPhone Batteries
    If you feel that you need assistance with the battery concern, you can always reach out to us via the link below.
    Contact Apple
    Cheers,
    Jason H

  • Problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    problem updating to iphoto 9.6 after upgrading to Yoesmite  I am getting the following message when I try top date iPhoto This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or canc

    "This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled." ?
    This error message will appear erraneously, if you skipped the update to Mavericks and iPhoto 9.5.1 and went straight from an earlier MacOS X version to Yosemite, without first updating to iPhoto 9.5.1 and associating iPhoto to your AppleID.
    Try first to buy iPhoto with your AppleID instead of updating. Delete iPhoto from Applications, but don't empty the Trash, then go to the main page of the App Store and search for iPhoto. If you are lucky, it will show as free and you can buy it directly.
    If iPhoto  is not showing as free, there is no help but contacting the App Store Support: Ask for a redemption code. You will need to provide a prove of purchase for your mac with iPhoto preinstalled.
    http://www.apple.com/support/mac/app-store/contact/

  • I can not open canon 60d raw images on photoshop CS5.1? can not go to updates either- error?

    I can not open canon 60d raw images on photoshop CS5.1? the same program on stationary mac can open the same raw files, whereas new lap top can not? Why?  can not go to updates either- error, why?

    Which version of mac os x does your new mac have?
    What error do you get when going to Help>Updates in photoshop cs5.1?
    You might try downloading and installing the 6.7 camera raw update from here:
    Adobe - Photoshop : For Macintosh : Camera Raw 6.7 Update
    If you need any other updates, you can find most of them here:
    http://www.adobe.com/downloads/updates.html

  • Problems to reconize the sim card after upgrade itunes, what should I do???

    Problems to reconize the sim card after upgrade itunes, what should I do???

    Get a SIM card from the carrier to whom the phone is legitimately locked.

  • Video sync problem in vista premium 32bit even after enabling all movies

    video sync problem in vista premium 32bit even after enabling all movies and or movies.the vids are in itunes and ive tried to sync again and again.with no luck .
    and i cant seem to find a related or symular problem. has anyone else had this problem?

    cbeer77 wrote:
    Not sure how to find out the GPU acceleration
    Edit > Preferences > General
    If GPU acceleration is checked, uncheck it and see if that helps.
    Also:
    Could you give us a Mediainfo or Gspot screen shot of what's in the AVI wrapper?
    Please  answer Richard's question.

  • Cannot open Canon CS2 Raw files in Bridges and Photoshop

    I cannot open Canon CS2 Raw files in Bridges and Photoshop. I have never been able to open it.

    Here are what cameras are supported by what version of the ACR plug-in and Lightroom:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    Here are what Adobe programs use what version of the ACR plug-in:
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

  • I am unable to open canon 6d raw files w/ elements 11

    I am unable to open canon 6d raw files w/ elements 11. It seems that camera raw 7.1.0.384 is installed. I tried to update and nothing happens.Any help please?

    Sometimes the Adobe servers can get busy; so try again from Expert Mode:
    Help >> Updates
    You should be able to select ACR 7.4 (see image) and then click the update button.

Maybe you are looking for

  • Default Keyboard input change in using roaming Profile on different Win 7

    We found a strange problem on default Keyboard setting. We are using roaming profiles for all users. One of our users is using two Windows 7. One Windows 7 is VDI for working out of office and another Win 7 is her local PC. She is only using Two keyb

  • Xperia l restarts when using Walkman app with internal speaker

    Hi recently I updated my xperia l to 15.3.A.1.14. But after that whenever I start playing songs without headset my phone shutdown and restarting. Is there any solution for this issue. Anybody please help to fix this problem. Solved! Go to Solution.

  • 2 Clusterware on the same node

    Hi everyone in this forum, I want to ask: is posible install 2 clusterwares (Infrastructure Grid) on the same machine. We want to have 2 ORA_GRID_HOME in the saeme machine for having 2 solutions complety indepently. Thank you very much for yours time

  • SPL Block when manually changing address detail form r3

    I have a strange situation: We have completed an upgrade to GTS 7.1 - SSLLEG SP 15 We are using R3 4.7 - PI 2004_1_470  SP 0015   PI_BASIS 2005_1_620 SP 0014 When we create a sales order with reference to another sales document - and manually change

  • ERROR WHEN I HIT WEBLOGIC CONSOLE

    Hi all, i have installed OIM PS1  did the following steps 1) Install Database 2) Run RCU and create Schema for required products 3) Install Weblogic Server 10.3.6 4) Install SOA Server and Install SOA patches 5) Install IDM Server 6) Create Domains 7