Problem opening files with Mac OS Mavericks and Elements
I have recently installed Mac OS 10.9.x Mavericks. Since this I have had problems opening files in Elements 11. I upgraded to Elements 12, blindly hoping the problem would fix itself, however it hasn't. When I try to open a file the Finder window pops up then disappears immediately. Occasionally it will stay open until I scroll down but then closes. I keep the files on an external drive but the drive is working with all other applications, so I don't think it is that. If anyone has had a similar problem and has any ideas I would be grateful as the program is unusable for now. Thanks very much in anticipation
Hi Sjmitc, I followed Barbara's instructions about only about 24 hours ago and since then my files have been opening perfectly. I tried it again before replying to you and they are still opening fine.
I did have to go through my files a couple of times to find all the Elements preferences, but the solution is working fine so far. I will let you know if I have any further problems. It is maddening when it happens, so I hope you can fix yours.
Best of Luck
Date: Wed, 6 Nov 2013 18:23:28 -0800
From: [email protected]
To: [email protected]
Subject: Problem opening files with Mac OS Mavericks and Elements
Re: Problem opening files with Mac OS Mavericks and Elements
created by sjmitc in Photoshop Elements - View the full discussion
Henwen, Is this solution still working for you? I tried this same solution on mine a few days ago and had no luck. However, it actually let me open files this afternoon then when I went back in later today, it was doing the disappearing act again.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5821793#5821793
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5821793#5821793
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5821793#5821793. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
Similar Messages
-
Having problem opening files with gradients in CS2
When I try to open an illustrator 9 file from CS2, I get "An unknown error has occurred." message. I believe this may be a CS2 problem because when I checked further, I discovered that only AI 9 files where the gradient feature was used were affected. Any suggestions would be appreciated.
Hi Sjmitc, I followed Barbara's instructions about only about 24 hours ago and since then my files have been opening perfectly. I tried it again before replying to you and they are still opening fine.
I did have to go through my files a couple of times to find all the Elements preferences, but the solution is working fine so far. I will let you know if I have any further problems. It is maddening when it happens, so I hope you can fix yours.
Best of Luck
Date: Wed, 6 Nov 2013 18:23:28 -0800
From: [email protected]
To: [email protected]
Subject: Problem opening files with Mac OS Mavericks and Elements
Re: Problem opening files with Mac OS Mavericks and Elements
created by sjmitc in Photoshop Elements - View the full discussion
Henwen, Is this solution still working for you? I tried this same solution on mine a few days ago and had no luck. However, it actually let me open files this afternoon then when I went back in later today, it was doing the disappearing act again.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5821793#5821793
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5821793#5821793
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5821793#5821793. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0. -
ICloud OK with Macs running Mavericks and Mountain Lion?
I have two Macs on Mountain Lion currently, but only want to upgrade one of them to Mavericks.
Will iCloud still work seamlessly?
Thanks!Correct. iCloud is compatible with OS X Lion and later, so you won't have any problem using iCloud in OS X Mavericks even if one of your Macs is using OS X Mountain Lion. The only thing that iCloud adds in Mavericks is iCloud Keychain, so you can't use it with your computer with OS X Mountain Lion. Apart from that, everything should be working correctly.
Before upgrading, make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com -
How to delete pages in a pdf file with mac OSX Mavericks?
Indeed i don't have Pages options in my tools window... Is that normal for the mac version? Please it's urgent...
Sorry, it was my fault. When I searched on the Internet, I was reading the Acrobat help pages, without knowing it, because in my research I wrote "how to delete pages in a pdf file with Adobe reader", i was just automatically redirected toward Acrobat help but i didn't notice.
So no incorrect information exist in the Reader Help pages. -
Problems opening files with adobe reader 11
I have just downloaded Adobe Reader 11 and now cannot open pdf files online (the computer freezes and I have to shut down explorer) or saved files either (adobe reader opens for about 5 seconds, then just shuts down). I am operating on windows 7 and have all the current updates from windows. Can anybody help please?
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
Another thing to try: use Windows Explorer and navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader
then double-click on Eula.exe and accept the license agreement. -
I'm using OS 10.6.8 and Mail 4.5. When I receive mails with attachments which are visible the save button doesn't work. And some contacts occasionally have problems opening files sent by me using Mail too. This was never a problem on pre-Intel Mac. A real Mac **** up ! Any ideas ?
Can you drag and drop the attachments visible in the email to the Desktop OK or does that fail ?
Re the sending: Are these recipients on Mac's or PC's as the file type could be an issue, if on Mac's then try setting the Mail Preferences Composing setting to Plain Text not Rich Text and see if that improves things. -
Opening files with Illustrator and photoshop doesn't work, i have to drag the files from finder in to the program.
This problem appears after opening 4 a 5 files, rebooting helps another 4 a 5 times and appears again.I'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
Good luck. -
indesign opens files with no space between each word, this happened after a mac update, help?? I don't want to have to go through and manually do it.
thanks in advance!If you are unable to enter the passcode into your device, you will have to restore the device to circumvent that passcode.
Is the music purchased from iTunes? If it is you can contact iTunes support and ask them to allow you to re-download the music that you purchased from iTunes.
Also, do you sync the device regularly? When syncing an iPod Touch/iPhone a backup file is made. That backup file doesn't contain your music but it does contain your address book, application data, pictures, notes, etc. After restoring your device, you can try restoring from the last backup that was made of your device so you will not have to start over completely from scratch.
Hope this helps! -
Process.start("winword", filename) can not open file with space in the path and name
Hi,
I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles.
the problem: if the path or file name has space in it, even it exist, winword still can not open it.
could someone kindly show me what I did wrong and how to do it properly.
Thanks in advance.
Belinda
public static class FileOpen
public static void info()
string path = @"c:\a temp folder\aaa 1.txt";
if (File.Exists(path))
// the file I am using in the sample does exist
MsgBox.info("yes");
else
MsgBox.info("no");
// working
//Process.Start("winword", "c:\\aaa.txt");
// not working
//Process.Start("winword", "c:\aaa.txt");
// not working
Process.Start("winword", "c:\\a temp folder\\aaa 1.txt");
// not working
Process.Start("winword", path);string AppPath;
AppPath = ReadRegistry(Registry.CurrentUser, "Software\\FabricStudio", "TARGETDIR", value).ToString() + @"help";
string FileName = "'"+ AppPath + "\\ImageSamples.doc" + "'";
try
System.Diagnostics.Process.Start("Winword.exe", FileName);
can any body please help for this.
where i am making mistake? -
Help, I installed parallel and windows, and opened videos (on an external hard disk) with windows, and now cannot open them with Mac, and use i movies. How do I reverse this?
Paragraphs help the reader, just saying.
What are you actually trying to do? Why do you need "DVD size" folders if you're creatng an Archive on an external hard drive?
Also, I understand burning folders instead of individual photos or albums gives you more space on a DVD.
It makes no difference at all.
How can I keep the captions on my photos (not events) when I print or transfer to a new folder?
You can export while writing the metadata to the file in most cases.
Tne only way I know is to copy photos from the Windows to folders on my HD, then copy and paste photos or albums or events to HD, then create a new folder and fill it to the appropriate DVD size.
HD? Another HD? You use HD there in a way that makes no sense. What's the point of 'DVD size'?
I also thought I should download future photos to my Canon programming that comes with EOS cameras and edit and then decide which photos to save to iPhoto library and which to save only to my archival HD?
Does this have any relation to the previous questions? You know you can delete from iPhoto, right?
You're somewhat confused and you need to
1. Decide what exactly you want to do
2. Then go about it.
If I understand you correctly - and there's no guarantee that I do - the easiest thing is to bring all your Photos into iPhoto and do everything from there.
You can have an archive on an external disk, you can sort and select and edit with or via iPhoto
Regards
TD -
Unable to open PDF files with Adobe Reader, Mac trying to open files with QuickTime instead, but not succeeding. HELP!
Hi BDAqua,
Thanks for the info, I dragged a PDF to desktop ctrl-, get info. change all to open with adobe.
Problem solved, many thanks for a quick response.
Barry69 -
I updated my MAC to Mavericks and purchased iPhoto 9.5. Installed iPhoto; however when I try to open iPhoto I receive The folling, "To open your library with this version of iPhoto, it first must be prepared. To prepare use iPhoto Library Upgrade". I have have downloaded and installed the upgrader, with no success.
I need to add that I am a senior and am not as computer savey as I should be. Therefore, i really need step by step help.After you download the upgrader, you will need to go to your Applications folder and find the Utilities folder.
In there will be the iPhoto Library Upgrader (version 1.1). Open the application and follow the instructions. Should get you going. -
I started to learn HTML, and I'm using text edit and everything is going fine, when I save the file with a .html extension and open it with safari I only view the code and not the webpage that was supposed to be created.
That is because you don't have a web server configured and running to serve the html page. In order to see the page in a browser you need to access it using a url similar to http://localhost/~yourUserName if you are serving the page from your user account.
Prior to Mountain Lion you could go into web sharing and turn on the web server. With Mountain Lion there is no option, other than using terminal, to turn on the web server. The web sharing menu item has been removed in Mountain Lion. Apache is still on your computer but it will take a little searching these forums or the Internet to find how to turn it on.
If you want a graphic user interface to turn on/off the Apache server you could download and install a server application like xampp, http://www.apachefriends.org/en/xampp.html. I use this and it works well. -
Swing problem with mac os 9 and 10
Hi,
I've finished my first "big" application, a little french-lemmatisation tool. It works well on my PC but some people who have tried it with mac os 9 and X tell me it doesn't work at all ?!
I've built my soft with InstallAnywhere 5 (is that the bad idea ?). On mac OS9, it reports java.lang.NoClassDEfFoundError : javax/swing/UIManager (which is the first Swing element that is called). So it seems that the path is not correct. On mac OSX, it stops too (no message)... I've spent my day to try to understand what I should change. Without success.
Where do you think I should watch to correct the paths ?
The installer (in French) can be found at this adress : http://wwwpeople.unil.ch/Benoit.Curdy/install.htm
(I don't think there is a problem in the code but if someone wants to have a look : http://wwwpeople.unil.ch/Benoit.Curdy) it's free ;)
ThanksI developed a application for MAC os/x and win plateforms.
To distribute my appplication on wins , i use installAnywhere but for the mac I use MRJAppBuilder to create a application.
Then the user has just to drag the directory from the CD to his desktop or anywhere else, and make an alias to the app on his desktop to lauuch the app.
MRAppBuilder is on every MAC OS/X, I think.
Hope it helps -
Can all Acrobat Readers open files with mixed orientation pages (portrait and landscape)?
Can all Acrobat Readers open files with mixed orientation pages (portrait and landscape)? If not, which versions can? Thanks!
Hi Sami,
You can open files with mixed page orientations in all Adobe Readers There is no such constraint on opening files with different page orientations in Adobe Readers.
In case if you have any other query please let us know. We will be happy to assist you.
Regards,
Aadesh
Maybe you are looking for
-
I just went to the apple store to replace my Ipod Touch yesterday. There I began the process of restoring my Ipod. When I got home to continue doing it my apps werent downloading, they just read waiting... So I decided to stop the restoring and my ap
-
Dear Forum, I have below 4 scenario to seek advice. When there is quantity variance during miro, how does the system do 1) PO quantity 100 unit. GR 40 unit and IR time also 40 unit. This will post automatically during miro as GR/IR account value same
-
I installed the new firefox 4 browser today. In the description about the new app tab the following feature is claimed: "Links to new websites open in a new tab so that your App Tab doesn't change." This doesn's seem to work for me. When I click a li
-
Graphing visualization bug - holes in 3D stacked area graphs
Has anyone seen this bug in the grapher? http://web.mac.com/iconoplasty/iWeb/Site/other_data/numbers-bug-1.pdf http://web.mac.com/iconoplasty/iWeb/Site/other_data/numbers-bug-2.pdf These are both 3D stacked area graphs of similar periodic data from t
-
New to Weblogic 7 - How do I verify digital certificates?
Hello, I am new to Weblogic and my department has 2 servers running Weblogic 7 and they have asked me to verify whether the servers have both root and intermediate digital certificates installed. How do I check for this?