Problem opening ipad 2!

i bought a brand new ipad 2 from Apple store; however, i cannot slide to set up my ipad. I also did a reset for my ipad, but i did not work. What am I going to do now?
Thanks for your help

Try the reset a few more times.
Hold the Sleep and Home button down (approximately 10 seconds) until you see the Apple logo.
Note: Data will not be affected; make sure battery is charged.

Similar Messages

Having problems opening my Ipad as code is not being recognized

I am having problems opening my ipad as it is not recognizing my code. what shall I do?

i typed the code i chose yesterday and it did not work, and now my ipad is disabled. what do i do? cannot make it work.
thank you for your reply!

HT4061 How do I unlock my iPad? Unable to get serial number since I can't open iPad to get serial number to get help fixing problem.

How do I unlock my iPad? Unable to get serial number since I can't open iPad to get serial number to get help fixing problem.

What do you need the serial number for to unlock the iPad? If the iPad is locked because you forgot the Passcode, you have to restore the device.
What are you trying to unlock?
Your serial number is written on the back of the iPad and on the box that the iPad came in.

I am having a problem opening the safari on my ipad. In the settings it shows that I am connected but when I go on the safari , it says that I am not connected.... any ideas. thanks..

I am having a problem opening the safari on the ipad. In the settings it tells me that I am connected to the internet but when I open the safari, it tells me that I am not connected. any ideas ?... thanks

Start with a reboot of your router and power the iPad off and on. Then look here for more help.
http://support.apple.com/kb/TS1398

Pdf problems on iPad

Hey all,
I have a problem opening .pdf files, converted from MS Word to .pdf in Adobe Acrobat. The .pdf file shows different font, font size and font settings. The font originally is arial, nothing exotic. The iPad pdf reader I use is GoodReader.
Please give me a hint what may be wrong.
Thnx.

will try.
can the problem be in update-ting iOS, because there were no problems before..? if so, why is this a problem?

Problem opening my project on adobe premiere element 10.

When I try to open it it says: Cannot open project because some file are damged or are obsolete. Does someone have any advice on what I could do?

Thank you, problem solved. A corrupted photo , thanks
Envoyé de mon iPad
Le 2014-04-17 à 21:08, "A.T. Romano" <[email protected]> a écrit :
Re: Problem opening my project on adobe premiere element 10.
created by A.T. Romano in Premiere Elements - View the full discussion
berthiaumes
What computer operating system is your Premiere Elements 10 running on?
Please review the following Adobe document on damaged project, if you have not already.
http://helpx.adobe.com/premiere-elements/kb/troubleshoot-damaged-proje cts-premiere-elements.html
We will be watching as your discussion with SB moves forward.
Thanks.
ATR
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6308980#6308980
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6308980#6308980
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6308980#6308980. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

HT1212 My ipad cant connect to itune due to locked wrong pass code to open ipad, how to solve my ipad?

I have problem with my ipad, when started to open ipad, i have to type code to open the ipad, but many times incorrect type. My ipad can't connect to Itune due to this locked. My ipad mini
Thank you.

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Problem opening pdf file from an app built by Flash Builder 4.5

problem opening pdf file from an app built by Flash Builder 4.5

The iPad and iPhone have NEVER supported Flash and never will. In fact, Adobe is no longer distributing Flash builds to mobile devices.
Time to move on...

I have problem with ipad is disabled

HI Mac,
I have problem with ipad was disabled. Please fix it. Let me know.
Thank you,
Luul

If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
iCloud: Activation Lock
http://support.apple.com/kb/PH13695
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I am trying to open iTunes on my mac. But a box pops up saying "The folder iTunes is on a locked disk or you do not have write permissions for this folder". Anyone know what that means? I've had my computer 2 years and its never had a problem opening it

I am trying to open iTunes on my mac. But a box pops up saying "The folder iTunes is on a locked disk or you do not have write permissions for this folder". Anyone know what that means? I've had my computer 2 years and its never had a problem opening it

I've already right-clicked on the application, clicked "get info", and changed it so all people listed in the "Sharing & Permissions" section have the "read & write" privilage.
The error message is referring to your iTunes library, not your iTunes application.
You need to check and fix the permissions of the iTunes folder in your iTunes library. This is by default located in your "Music" folder.
Select the folder Music > iTunes in the Finder, right click on it or Ctrl Click and click "Get Info". At the bottom of the contextual window thatwill pop up, disclose the Sharing and Permissions brick, change your status from Read only to Read & Write. You may need to click the padlock icon to make changes.

I'm having a problem opening my files -..

I'm having a problem opening my files …..for example if i want to download something off the internet and run it after it always opens in Textedit which is annoying…..other programs open fine which are dmg but the exe files won't run….i need help

If you are in fact running Mac OS 9 or earlier, which is from 2001 or earlier, .dmg files are disk image files like the .smi files used under Mac OS 9, but they are only Mac OS X compatible. They are frequently used to store Mac OS X only installer disk image files. .exe files are are Windows and MS-DOS executable files which can only run with Windows or DOS virtualization:
https://discussions.apple.com/docs/DOC-2741
Most Mac OS 9 programs you'll be able to download either have a .sea, .sit, or .hqx suffix in their file name and are able to be opened with the old Mac OS 9 copy of Stuffit Expander.
If you are using another operating system, please go to Apple menu -> About this Mac and tell us what you are running. You posted to the Mac OS 9 forum, hence my response. If there is an X in the name, you posted to the wrong forum, and I'll have this post redirected and try to answer if I have time.

I am having a problem opening pdf document. I get error message: "Adobe Reader has stopped working"

I am having a problem opening pdf document. I get error message: "Adobe Reader has stopped working" then I get Windows is looking on line for a solution, but then my document closes. I tried uninstalling and reinstalling Adobe Reader XI, rebooted my computer but this did not help. I get the same message. What to do?

Can you open Reader by itself? If so, check if disabling Protected Mode improves the situation [Edit | Preferences | Security (Enhanced)].

Error: "We're having a problem opening this location on file explorer. Add this website to your trusted sites list and try again"

Hello,
When i try to open document library from SharePoint Production portal then it throws the specified error. However, when i open document library from SharePoint Development portal then it opens it in file explorer quite easily.
Production portal is on https whereas development portal is on http. Also, UAG has been configured on production portal.
Any idea where it's getting stuck up? Surely, this is not a browser issue on Windows 7 as it's opening the development portal's document library on the same machine.
I've also done following things:
- Configured Desktop Experience on production environment
- Installed the hotfix for Windows 7
Regards,
Sohaib
Sohaib Khan

Hello Sohaib.
Here is the list of causes defined here.Hope it helps you
The cause and the resolution methods are the following:
Cause: There is a missing Root site collection...
Resolution: Check and ensure, that the “Managed Paths” are not changed in the web Application’s page, there is a (root) explicit for
this web application and there is a working Root site collection.
If for any reason this is not the case in your environment, you may try the following:
- Apply (if not already) the following Hotfix to one of those clients:
Error when you open a SharePoint Document Library in Windows Explorer or map a network drive to the library after you install Internet Explorer 10 in Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2846960
Then, try to delete the cache of the IE browser before reproducing the issue. Check the result..
- Try to temporarily disable the Antivirus and test again.
- Check if you have installed the Desktop Experience feature on the SPS13 server.
- Check if you face this behavior with all users, Or only with some specific ones, Or with all different client OSes..
Otherwise you will need to collect the logs to further analyze...
http://blogs.msdn.com/b/george_bethanis/archive/2013/11/04/sps13-quot-open-with-explorer-quot-random-error-quot-we-re-having-a-problem-opening-this-location-in-file-explorer-add-this-web-site-to-your-trusted-sites-list-and-try-again-quot.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

I am having problems opening pages in safari. the rotating wheel at the right end of the address window doesn't stop even after the page has filled up. then if i try to open other pages it gets stuck and won't open them.

I started having problems opening pages today. When first open a page it seems to download the page OK, but the rotating wheel on the right-hand end of the address field keeps rotating after the page is completely filled up. Then if I try to open other pages it becomes slower and eventually stops filling-in the pages, while the rotating wheel keeps rotating.
I wonder whether junk is being downloaded into my mac, or what is going on. Help will be geatly appreciated.

When was the last time you emptied the Safari cache?
From your Safari menu bar click Safari > Empty Cache
If that didn't make a difference, go back to the menu bar click Safari > Reset Safari. Select the top 5 boxes then click Reset.
And how much free space on the startup disk?
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space. Freeing Up Hard Disk Space - Mac Guides
If emptying cache or resetting didn't help and there's enough free space on the startup disk, login to another user account, launch Safari. Same problems there indicates a system wide problem. Log back into your admin account so you can check the startup disk.
Launch Disk Utility. /Applications/Utilities
Select MacintoshHD in the panel on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions)
If the startup disk needs repairing, follow the instructions for Using Disk Utility to verify or repair disks
I wonder whether junk is being downloaded into my mac
Nothing should "download" to your Mac unless you initiate the download yourself. You can check the Downloads folder from the Safari > Window menu or your Downloads folder in the Finder.

Error message when publishing and problems opening output file

I have 5 projects linked together. When I publish one, I get a message that the files listed below are linked to the open project, and one or more of these projects may require exporting. I have tried to open these files and choose File | Export | Project to | but the options in the list (Flash 8 and Flash CS3) are both grayed out--on every one of these files. I'm publishing to Flash 9.
I didn't think much about this message until a few reviewers said they can't open the project, or when they do, they don't see my playbar on the skin.
One more thing--when an IT person was trying to help one reviewer open the output file, the IT person said "Oh, there's a problem with the code in line 25." I guess that's the html code? I'm not a programmer, but I can look at html code. What should I be seeing there in line 25?
Is their problem opening the output file(s) related to my message about possibly needing to export files? Why might they be having problems getting the output file to open?
Thanks for any insights you can provide!
SAM

Hi Sam
It depends on a number of things. Are you certain you uploaded all the files involved? If not, there will be problems.
The message about the linked files is quite simply advising you that you have links from that particular movie that will expect to find the files being linked to.
If a person isn't seeing playback controls and you have included them, it's likely you haven't provided the correct link for them to open and play the file. Typically you provide a link to the HTML page Captivate creates. As long as all the output files are in the same place on the server, you should be good to go.
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Problem opening ipad 2!

Similar Messages

Maybe you are looking for