Problem opening mail attachments...were opening seamlessly on os 7.0...get an error Filename Office open XML document/presentation File size Does anyone have a solution? Please help.
problem opening mail attachments...were opening seamlessly on os 7.0...get an error
Filename
Office open XML document/presentation
File size
Does anyone have a solution? Please help.
Hi Charlotte,
You don't say what your version of Windows you have. Assuming XP, go to Start | Run, type DXDIAG and click OK. Click the Sound tab and run the tests to eliminate a hardware problem first of all. If you don't hear anything, check your cables first of all. Also make sure "Mute" isn't checkmarked in your sound setup. You'll find that in Windows Control Panel.
Which browser do you use? If you have Firefox 4, sign up to the HTML5 trial @ http://www.youtube.com/html5
HTML5 is the latest video standard and doesn't require Flash player. Google is in the process of converting all its files to work with the new format. It may solve you problem. If you don't have Firefox 4, you can get it from here: http://www.mozilla.com/en-US/firefox/fx/
IE8 doesn't support HTML5.
To clean out your temp files, go to Start | Run, type: CLEANMGR and click OK. Click OK again to start the utility. Tick all the boxes except "Compress old files" because the latter takes too long, and then click OK. You can run this utility any time you wish by the way.
The above steps will hopefully fix your problem. If not, post here again please.
Similar Messages
-
Since I have connected my iPad with the MacBook through ICloud I have problems in Preview of opening PDF- and JPG-files. Does anyone have a solution for this?
I'm not sure I understand the connection between iCloud and this problem. Is it simply a problem of coincidental timing (ie, the problem happened after you set up iCloud)? If so, there's almost certainly no connection between these two events.
Where are you getting the files you're trying to open, and what specifically happens when you try to open them? -
Hi, I was importing pictures into iPhoto from my sd card and suddenly iPhoto quit. Now it just won't open. When I click on the iphoto icon in the dock, nothing happens! Does anyone have a solution to this problem please?
As a test launch iPhoto with the Option key held down and create a new, test library. Import some photos and test to see if the same problem persists. Does it?
If it does then your current library has been damaged and should be repaired: apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start
with Option #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT -
I opened a pdf file that was attached to an email message I received and now it will not close when I press "Done" as files usually do. Does anyone have a solution to suggest please? Thanks.
Try double clicking your home button then force close the stuck PDF by swiping upward. Once you've done that just click the home button again to exit.
-
After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .
Hi,
What version of the OS did you upgrade from ?
Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
In the Apple Icon menu use the About this Mac item.
In the new panel click twice on the line that tells you the current OS level
It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
If it is missing you need to get it replaced.
(It is supposed to be done on Repair or Refurbishment).
An Apple Store or Apple Authorised Service Provider as the best choices.
There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
8:56 pm Sunday; November 24, 2013
iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
Message was edited by: Ralph Johns (UK) -
After performing a routine software update this week, I am having problems with both of my email accounts. I am unable to "Reply" to any emails. Does anyone have a solution to this problem?
I am having the same problem also Thought it was my network and reset everything including Apple TV but still the problem is there . I assume now it is down to iOS 8 prior to that was perfect
-
My display has quit working. Does anyone have a solution for this problem?
I have had my Verizon Jetpack MiFi 5510L for a couple of months now. It has worked fine until a few days ago the display on it started looking strange and now has finally gone blank. Does anyone have a solution for the problem?
You can do both, whatever is more convenient to you. As long as VZW gets its hands on the old device you will be good to go. Replacements under the warranrty require the user to turn in the old device to VZW. If your old device is not returned then you will be charged a fee for an entirely new device. Purchasing a tracking number for a shipment of this kind would be a good idea if you choose to send it in. Otherwise dropping it off at a store is the safest route you can take.
I would suggest contacting VZW phone support on this one and running through your options. The VZW phone rep can coordinate a delivery to your local VZW store if they do not already have one in stock. You can also turn in the old device in person to rule out any non-returned device fees. -
I have downloaded the iOS6 software on my iPhone4 and now I can't delete/move or create new mail. The bar at the bottom has disappeared. Does anyone have any solutions?
Hold Power and Home buttons until iPhone restarts. Ignore "Slide to Power off".
-
When I try to install PSE11, I keep getting error 1935, does anyone have a solution for this problem
When I try to install PSE11, I keep getting error 1935, does anyone have a solution for
this problem?This thread from the Premiere Elements forum may help:
http://forums.adobe.com/thread/1286807?tstart=0 -
Does anyone have a solution to fixing the Facetime echo problem?
I get this echo that occurs only on my end. It's louder than my friends who I video chat with. They use an older model of the MacBook Pro, but they do not have this echo problem. Does anyone have a solution to this?
I have the same problem. If I use an iPad for facetime, it works fine. If I use skype or voip, it works fine. If I use facetime, the other party hears an echo. To fix it 'i have to turn the audio down to inaudible levels. "use headphones" isn't a solution, when it works fine in Skype.
What probably happened is, previous macbooks have had the microphone and speakers sufficiently separate that they've never had to bother with echo cancellation. Now they've screwed up with the positioning on the retina macbook pro and facetime testing never even occurred to them. I've seen plenty of posts about this issue, not a single apple response. Apple really needs to respect their customers more. -
In Safari, the link to "mail this web page" doesn't work, and the share link shows "no service". Does anyone have a solution? I have a MacBook Pro and upgraded to Yosemite yesterday.
See here: If sharing options and Markup are missing after you install OS X Yosemite
This resolved the issue for me.
Rick -
Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you
Hello I bought a new 11 inch 2012 macbook air. Recently, i have been watching youtube and movies from my laptop. I have seen some green images flickering when playing videos. Does anyone have any solution or the cause of the problem ? Thank you
-
I have Imatch and songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?
By "hard reset" you mean hold down the Home and power buttons until the iOS device restarts, correct?
-
Using SMTP I can not use a mail server with more than 13 characters. I get an error from TCP open
I have no trouble sending an email if the mail server name is less than 13 characters long. I get an error 54 from TCP open when it exceeds that length. How do I get around this?
Don't know what to say, I just tried the SMTP email VI I have with an 18-character mail server address and everything worked fine. The error 54 means that the address is ill-formed.
The only thing I would suggest is trace the mail-server address down through the hierarchy and make sure nothing is done to modify it. Also try putting a probe on the wire going into the TCP open function and make sure the string you see there is the same one you are using. Finally, change the formatting of the control taking the address into the subvi that contains the TCP open function (SMTP Open Session.vi)to show the slash codes and make sure some invisible characters aren't getting added along the way.
As a last resort save the vi in 6.0 format and send it to me and I'll
try it on my system--maybe there's something screwy going on with your computer...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps -
Hi. I am trying to restart my macbook air. but getting the following popup : "The application Mail cancelled shut down. To try again, quit Mail & chose Aplle menu > Shut down"
Problem: I dont seem to be able to quit Mail. "Quit Mail" in the menu is grey. Also, I can seem to open Mail & see my mails.
This problem started to showup after I downloaded & installed Thunderbird as a mail software.
Could somebody advie.To make Mail quit you'll need to perform a forced quit or, failing that, a forced shutdown.
When an application won't quit you can hold the Command and Option keys together and then type the ESC key. This (usually) brings up a dialog with all the running applications. Select the offending program and click the Force Quit button.
If this doesn't force the application to quit (quite rare) or if you cannot get the Force Quit Dialog to pop up, hold the power button for about 10 seconds to shut down the entire computer. This should be a last resort but sometimes is necessary.
Maybe you are looking for
-
Cisco 1841 SSL VPN and Anyconnect Help
I am pretty new to Cisco programming and am trying to get an SSL VPN set up for remote access using a web browser and using Anyconnect version 3.1.04509. If I try to connect via a web browser I get an error telling me the security certificate is n
-
HT1338 Software Update says it can not connect to the internet - why?
I had to take my MacBook in to have it worked on. I can't afford to buy a new one so I have to fix this one. I had OS 7.2 Lion installed. Since then Software Update will not work always saying I should check my network connection to make sure it is o
-
A problem with initiating a BPEL process through its web service interface
hi, i am trying to initiate the helloWorld BPEL process through its web service interface. i use a proxy class that i wrote and i use it from J#.net. this is the relevant code part: hello.HelloWorldBinding wsProxy = new hello.HelloWorldBinding(); wsP
-
Error: iTunes cannot run because it has detected a problem with your audio configuration. iTunes worked perfectly fine before I downloaded and installed Version 7.0.2 I had 7.0.1 Anyone know how to possibly fix this....I would love to have axcess to
-
Airplane sound when opening new tab.
When I open a new tab it sounds like an airplane flying overhead. I already tried the safe mode thing and it does not occur in safe mode I am already on the default.