Problem opening OneNote notebook from Web App to Desktop App

Hi everyone,
Apologies if this is not the right forum. Hope someone can help me. I can't seem to open my OneNote 2013 Notebook which resides in SkyDrive (and is synced fine with my computer at home) in my copy of OneNote 2013 on my work laptop.
When I try opening the file from the Web App to the Desktop:
I first gett a message warning me about hyperlinks. That's fine, I click Yes.
The next message is about certificates, warning me that there is a problem with the site's security certificate.
The certificate is issued by a company I have not chosen to trust.
The name on the certificate is invalid or does not match the site
The security certificate date IS valid. I click Yes to proceed.
It now says:
We couldn't find a notebook at "https://etc.etc.etc/" A notebook usually has a table of contents file (*.onetoc or *.onetoc2)
Not sure why. As I say, it can do it from my home PC.
The problem could be with the network at work I connect to. I know the techies spent a long time trying to figure out which ports/domains to open to allow me to connect. They did it - mostly. I can access Skydrive from the web, but I can't sync files through
the Skydrive app sitting on my system tray. Weird that it works one way, but not the other.
It does open fine in the web app, but not when I try opening it from the desktop. I would much rather use the desktop app.
What do you think? Any suggestions?

Is anyone able to help with this please?

Similar Messages

  • Launch problem opening PSE 13 from a read only desktop applied by group policy

    PSE 13 won't launch.  What is different between opening PSE 13 and other programs? On a normal login it opens. Are there special requirements?

    Hi,
    Thanks for posting your issue in the forum.
    Based on your description, I suspect that maybe Software Restriction Policy has been configured in the domain. At this time, I suggest we could try to collect the following information to narrow
    down the cause of the issue.
    GPMC.log
    ==================
    a. On domain controller, click Start ->Run, type GPMC.MSC, it will load the GPMC console.
    b. Right click on "Group Policy Result" and choose wizard to generate a report for the problematic computer and user account (please place appropriately). (Choose computer and select the proper
    user in the wizard)
    c. Right click 
    the resulting group policy result and click the "Save Report…" => save report to save the report to a HTML file.
    Once we get the report, please check if the Software Restriction Policy has been configured and applied to the problematic computers and users. If so, please disable the policy setting to see
    if the issue persists.
    In addition, please try to refer to the following articles for detailed information about Software Restriction Policy and how to troubleshoot Group Policy problems.
    Software Restriction Policies
    http://technet.microsoft.com/en-us/library/hh831534.aspx
    Troubleshooting Group Policy Problems
    http://technet.microsoft.com/en-us/library/cc787386(v=ws.10).aspx
    Hope this helps.
    Best Regards,
    Andy Qi
    TechNet Subscriber Support
    If you are
    TechNet Subscription user and have any feedback
    on our support quality, please send your feedback here.
    Andy Qi
    TechNet Community Support

  • Problem opening pdf file from an app built by Flash Builder 4.5

    problem opening pdf file from an app built by Flash Builder 4.5

    The iPad and iPhone have NEVER supported Flash and never will. In fact, Adobe is no longer distributing Flash builds to mobile devices.
    Time to move on...

  • Opening pdf files from web

    New to forums. Trying to open pdf files from web, and no luck, despite following Adobe trouble shooting suggestions. Using OS 10.7.5.  no flickering or messages, just a tab with a blank screen. Older documents fine, nothing changed until this week. Downloaded X1 in attempt to solve problem.

    Yes i tried following your list of commands and got the same error from MyMathLab by Pearson Publishing or the other link.  I'm beginning to wonder if they are protected. 
    As you probably guess - I am not computer savvy.  I will take my laptop to school tomorrow and ask another student. 
    Thanks for your followup.

  • Problem opening Office documents from KM

    Hello, I have some problem opening Office documents from KM.
    We stored a lot of office documents (Excel, Word ecc.) in a File System repository (the standard repository "/documents"), when I open one of these files, before to view the document, a little logon window appears, it asks portal user's credentials.
    If the user presses the "Cancel" button the logon window will be closed and the document showed, but on the next attempt to open an office file the system will asks again the user information .
    If the user gives the right information the documents will be showed and the logon window does not appear again..
    How con I avoid the logon request for each Office document in my repository?
    Any suggestion??
    Best Regards

    Thank you a lot Brad!!
    We use Office 2003 and the note 549610 solves our issue!!
    Best Regards.

  • How to launch an Air desktop app from a second Air desktop app?

    Hi,
    Is there a way to launch an Air desktop app from a second Air desktop app?
    I'm using Air 4 with Flash CS 6 on Windows.
    Thanks

    According to Adobe documentation, AIR doesn't allow you to launch one application using another on desktop. The best bet that I could find at the moment would be to use the File.openWithDefaultAppilcation() function and open a file(like a .doc or .txt file) that has an AIR app set as the default application to use for X filetype. Unfortunately, launching app(.exe, .app, etc) files directly is not allowed. Probably for safety/security reasons. You might be able to get around that with a Native Extension though. Below is a link to the File.openWithDefaultApplication() method which includes a table of all the filetypes not allowed. Tried messing around with some ways around it, but the best I could do was open a new Finder window(testing on a Mac) and highlight the file. The code below assumes that both AIR apps are installed in the same app directory. Not sure how it would work on Windows but the result might be the same. For Mac, no special characters or anything was needed even though the app I was trying to open had spaces in the filename.
    var filePath:String = "file://" + File.applicationDirectory.nativePath + "/App to highlight.app";
    navigateToURL(new URLRequest(filePath));
    File - Adobe ActionScript® 3 (AS3 ) API Reference

  • Not able to open PDF files from Web

    Sometimes reader 9.3.1 in IE on Windows 7 stops working and it is not possible to display any more PDF files from web. Reinstall helps for a while.
    By looking into running programs I found the acrobroker.exe starts and immediatelly shuts down. After a while IE responds with a generic acrobat problem that asks me to shutdown acrobat reader and start it again.
    Any idea what might be wrong?
    Thanks

    For the settings to check, see the [[opening PDF files within Firefox]] article.

  • Adobe 9 opening pdf's from web site

    We recently upgrade to Adobe 9 from 8 and have noticed a slowdown in the time it takes to download and open a pdf from a web page link. Adobe 9 shows a download to a temporary folder pop up before the pdf will open. Adobe 8 did not behave the same way and seemed to open the same link faster. Is this controlled by an Adobe preference? We are using IE 7.0 and have new pc's with plenty of memory and processor speed so I know it's not the hardware causing the problem. Or is there a setting in IE 7 that might be causing this affect with the new Adobe version. Any help would be greatly appreciated. Thanks in advance,
    Tommy

    i would suggest a de-installation of Acrobat 9. Run Microsoft Installer Cleanup to remove any dregs left in the Registry. Disconnect computer from the web, turn off all virus and spyware protection. Then re-install.

  • Problem when exporting Query from Web template to Excel Sheet.

    Hello,
    Im encoutering a problem when im trying to export query output from web template to excel sheet.
    A popup windown appears when excel sheet opens which reads.."problem cameup in the following areas during  load : Cell Value".The report layout appears to be fine but the totals shows unwanted values starting with * followed by number.
    Any valuable inputs, what could be the problem. where can i rectify the same.
    Regards
    Ellora

    Hello A K,
    Thanks for ur time and response but the option u mentioned did not serve my purpose.
    The problem seems to be only with pirticular cells.As mentioned earlier the layout appears properly..all the values are seen..but the end result..totals are disturbed.
    eg: If the report shows in template the total value :20,668,554...when exported the values is shown as **668553.88000000600000.
    So what could be the problem ? any template setting ? global setting to look at ?
    Regards
    Ellora

  • Open OBIEE report from web application

    Experts, I want to open OBIEE report from a web application. I have a question regarding the security here. Say I login as 'USER1' in web application, I would have to pass 'USER1' in nquser parameter. Correct? Also, this report has access to 'Sales Group' users only. So, does 'USER1' in web application need to be assigned to 'Sales Group'? Or, any user in the web application can open this report as long as I pass nquser in the GOURL.
    thx,
    parag

    You don't need to specify group details.
    When the report hits OBIEE, it will determine the permissions based on the nquser.
    Hope it helps.

  • Problems opening pdf-files from KM of portal

    Hi,
    we store documents in our portal in KM. When I use pdf-files that where not saved with Office2007 tools I get the problem, that I can open the file once. If I open it the second time I get the error message "file doesn't start with "%PDF-". and the file will not be opend. If I delete the temporary files in the internet explorer, the file can be opended, again.
    If I open the file directly in the internet explorer I don't have those problems, so it seems, that the portal uses a different viewer than the internet explorer itself. 
    Has anyone an idea how to solve this problem?
    Regards
    Ulrike

    Ulrike,
    I think this is a known issue.
    Affected versions:
    o KMC SAP NetWeaver 7.0 (formerly named 2004s) SP 14
    o KMC SAP NetWeaver 7.0 (formerly named 2004s) SP 15
    If you have the above KMC and SP Versions then you need to follow the below SAP note:
    Note 1146711 - Problem opening PDF files.
    Have you checked the belowSAP Note?
    Note 954627 - Issues with opening/displaying PDF files from KM
    Regards,
    Karthick Eswaran

  • How do I open pdf file from web? Opening pdf docs from hard drive works fine.

    Hello,
      I am unable to open pdf files from the web.  Documents on my hard drive open fine.  My computer gives me 2 error messages when I try to open web-based documents.  Thanks.

    Why did you post so many informations about operating system, web browser, Adobe Reader version, and the error messages?

  • Problem with Print Email from Web IC

    Hello Experts,
    I am currently working on CRM 6.0. When i try to print an EMail from Web IC using Print Message Button at the bottom of Email body, I can only find this email in spool rather than printing on printer.
    Also I have assigned the printer to my user. Even though `m not able to get the print of the email using Print Message Button. Please Advice.
    Thank you.

    I have a same problem. I've turned on print immediately, but it still prints E-mails to spool and not to printer. Printing from GUI works ok. Do you have any other advice?
    Best regards,
    Duško Šorak

  • Problem opening Illustrator files from Bridge

    I recently installed cs5.5 and can no longer open my Illustrator files from within Bridge.  When I double click on the file in Bridge, it switches to Illustrator and the hour glass appears for about 5-10 seconds before switching back to the selector tool, but the file never opens???  The only way I can open Illustrator files now, is to do the File>Open command within Illustrator. 
    I'm hesitant to reinstall CS5.5 because it took so long the first time. 
    Any suggestions??
    Thanks
    Paul

    It only seems to affect ai files.  I am able to open psd files from Bridge.
    I just discovered that I am also unable to "place" ai files in InDesign.  The same thing happens - I go to File>Place, find the ai file, double click the ai file, the hour glass appears for a brief moment then disappears, but the file doesn't get placed.
    Thanks for any suggestions.
    Paul

  • Can't open pdf files from web pages

    I recently upgraded to Adobe Reader 8.1. Now I cannot open pdf files from email attachments. Advises to set Adobe Reader as default in folder options. When I try to do so, it appears to be OK, but still will not open files from emails.

    [email protected] wrote:
    > I recently upgraded to Adobe Reader 8.1. Now I cannot open pdf
    > files from email attachments. Advises to set Adobe Reader as
    > default in folder options. When I try to do so, it appears to be
    > OK, but still will not open files from emails.
    Did you check the settings of your mail client for handling attachments?
    Rainald

Maybe you are looking for