Problem opening original iPhoto files with Yosemite

On my iMac I have Yosemite. iPhoto works but iPhoto Original apps in Applications will not open. Told to update but I have and iPhoto is now
9.6   Earlier apps still do not open. This is the message I always get. Any fix for this? Thanks in advance.

Ok I went to the location and found this:
mac/library/application support/adobe/plug-ins/cs3/file formats/dng_cameraraw_4-6_091708.dmg
It turns out that it was here all along - I put in camera raw as two words and not one when I asked the finder and I put the exact name of the camera raw update so you can see it.
I must still be doing something wrong as its still not reading the NEFs from either my Nikon D700 or the NEFs from a D200 that I had before I switched to the D700.
I will go and check the path again - I do not know what else to do.

Similar Messages

  • Having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

    having problems opening a pdf file with reader 10/11 get error msg cannot open close reader and try again any ideas

    Hi George ,
    Is it happening with all the PDF' or any specific one?
    Could you please share the error message so that we can replicate at our end ?
    Try repairing reader  once and see if that fixes the issue.
    Launch Reader>Navigate to Help>Repair Adobe Reader Installation
    Regards
    Sukrit Dhingra

  • Problems opening & resaving NEF files with CS3/CS2

    I seem to be having problems sending my NEF files to Photoshop from Aperture. This started happening just today & I'm not sure what to do.
    What happens is that when I open a NEF file in external editor, instead of just opening up as a psd file in CS3 or CS2 directly like it used to do, it now opens Adobe Raw instead which means that I am unable to resave back into my Aperture Library. Is there anyone who has experienced this as well? Any suggetions as to the cause and a solution? I tried checking preferences for both Aperture as well as Photoshop but nothing seems to work.
    The only thing I can think of is having just updated Adobe Raw to the latest version, 4.3 I think. Other than that Aperture did start up about a week ago & declared my library corrupt & proceeded to rebuild my library. Other than that it was behaving normally until today. Its really irritating & counter productive to be unable to resave my edits in Aperture.
    Any help or suggestions will be very welcome indeed. Thanks in advance.

    Thanks for the tip Eduardo, but I checked the preferences and they seem to be correct.
    It seems that only images in certain projects were affected. Could be the ones that Aperture rebuilt earlier. I guess I may have to try exporting the raw files from the affected projects, then deleting and reimporting the projects again. I did try to rebuild the thumbnails but it doesn't seem to help.
    Does anyone have any other suggestions for me to try before I do this?

  • Problem opening D700 nef files with ACR 4.6

    Hi there,
    I am running PS CS3 on a Mac with OS 4.11. I have just down loaded the beta version of adobe camera raw 4.6 - normally I don't down load betas but I am desperate to work on my D700 files in PS CS3. And I still can't open the RAW files...ACR 4.6 won't recognize the 'NEFs'...I have followed the instructions about replacing the plug in as per the release notes. Yet I still can't open the files. I love PS, please help.
    Thanks,
    Sean

    Ok I went to the location and found this:
    mac/library/application support/adobe/plug-ins/cs3/file formats/dng_cameraraw_4-6_091708.dmg
    It turns out that it was here all along - I put in camera raw as two words and not one when I asked the finder and I put the exact name of the camera raw update so you can see it.
    I must still be doing something wrong as its still not reading the NEFs from either my Nikon D700 or the NEFs from a D200 that I had before I switched to the D700.
    I will go and check the path again - I do not know what else to do.

  • Original application file with extension .flc not opening

    hi,
    I have got an requirement from my end user for DMS. He operates a software named FLOW LOGIC CONTROL, from there he generates a document with extension .flc.
    I am able to check in the docuemnt in DIR, but when I try to access the same through DIR, it does not open.
    I have defined work station application as FLC with file format as .flc and application (path and programme name) as %AUTO% for Define work station application in network in customizing.
    Do I need to define application other then %AUTO% ? If so what it will be?
    I have tried to open same file through DIR on the desktop where the software is running, but there also I could not open original application file.
    Kindly help me resolving the issue.
    Thanks and Regards,
    Niraj Sikligar

    Hi NIraj
    The filed which I mentioned to You mentions the Path of the application which is used to display or change the Original Alpplication file.
    example.
    If you want to change or display Word document that you have checked in the content server, when you say display the system find the path where this Program ( eg. WINWORD.Exe ) .
    eg Path                 C:\Program Files\Microsoft Office\OFFICE11\WINWORD.exe
    Check in your PC this Path.Whenever you open a word document it uses this path for winword.exe to process word document.
    So in your case the program may be installed in your PC or on some anather Computer.If its on your local machine the Mention * %AUTO%
    If 2D or 3D Document mention it as suggested earlier reply.( I Think in your case a Engineering document is getting generated.And it must be 2D or 3D doucment. ).
    If your program in on anather machine then give path name of that program.
    Please press F1 in the field * Path with program Name * to check the help for possible entries.This will help you to solve the problem.
    Hope this helps you
    With regards
    Mangesh Pande

  • Photoshop CS3 shuts down after opening a PSD file with layers

    Hello, I have met a problem with Photoshop CS3 (Windows XP SP2, no network printer) - after opening a PSD file with layers (saved with CS2) Photoshop shuts down. No error message.
    Can some of you help me? (The only software that I have installed after Creative Suite CS3 is Corel X4. I have installed no upgrades of CS3.)

    > I have installed no upgrades of CS3
    You should!
    Even if it doesn't help here you should.

  • How to open a DWG file with AutoCAD options (AppleScript)?

    Hi,
    I'm looking for help specifying the AutoCAD options when opening DWG files.  I have DWG files of floor plans that I always want to open at the same scale. 
    I can successfully open a DWG file with the default options using:
    open POSIX file "/Users/crmckinnon/Desktop/cabin_floor_plan.dwg" as alias without dialogs
    But I don't want the default options, so if I try to specify them:
    open POSIX file "/Users/crmckinnon/Desktop/cabin_floor_plan.dwg" as alias with options {class:AutoCAD options, scale unit:"autocad inches"} without dialogs
    I get a "Can't find alias" error.  How do I specify the AutoCAD options?  I'm sure this is due to my lack of understanding of AppleScript.  Any help would be appreciated!
    Thanks,
    Chris

    I'll answer my own question.  Here's how I specified the options:
    open POSIX file filePath as alias with options {pGSO:original size, pASU:inches, pASR:12.0 / 0.1875} without dialogs
    I had to look in the Apple Script dictionary to get the "codes" to use.  The variable names didn't work.  I think that's because some have "global" in the name which is a keyword in Apple Script.  Here's what the codes translate to:
    pGSO = "global scale options"
    pASU = "scale unit"
    pASR = "scale ratio"
    Thanks,
    Chris

  • I can't open a PDF file with password with my iphone app

    I can't open a PDF file with password with my iphone app, the app send me an error, but the password is correct. This only happend in the new version of iphone. In the latest version I didn't have this problems.

    Can you please share the file with us at [email protected]? Also, can you please confirm that you are viewing the PDF in the Adobe Reader app rather than an app like dropbox, Mail or Safari?

  • An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to ad

    An attempt to open a pdf file with Photoshop Elements (version 12) resulted in a pop generated by the Photoshop Editor stated "Impossible to execute this operation (opening file) because one of the specified colour is not managed". Is there any mean to adapt the file to make its reading possible?
    Did somebody get the same problem?

    It is a high order probability that your SQL's report generator is creating the PDF, not Acrobat (which by design and EULA cannot be used in as/with server).
    That the report generator outputs to an old-old version of PDF bears this out.
    Wiki articles on PDF are very nice for those high level intro summaries.
    To know / understand PDF you purchase and study the ISO Standard for PDF (ISO 32000-1:2008).
    Rather than "PDF validation" you may want to consider addressing the appearent root cause of the problem(s).
    You can change the email2fax application to one that can deal with older PDF versions.
    You can change the report generator to one that can output to the ISO Standard.
    (Perhaps the in-use application can be configured to output to the current version of PDF (i.e., the ISO Standard).
    Be well...

  • Is there a procedure to open keynote 09 files with videos in the new Keynote without converting videos?

    is there a procedure to open keynote 09 files with videos in the new Keynote without converting videos?
    I have a big presentation with many video mov and avi files created with Keynote 09. When trying to open the file in the new Keynote the procedured crashes and Keynote crashes abruptly. It seens that an avi file is not converted. I have no more the old Keynote 09. How can this problem be solved?

    if you right click or control click on the file, do you get an option to 'show package contents'?

  • You already have a schema opened on this file with another name: abc

    I am trying to create a model for an XML file, when I clicked on "Objects to Reverse" checkbox under "Selective Reverse" tab, I am getting the following error:
    java.sql.SQLException: You already have a schema opened on this file with another name: abc
    I have created a Data Server in Topology whose schema and workschema are "abc" and logicla schema is "Labc".
    Where is the mistake going in?

    That is because you can only connect to a file in read/write mode once at a time. When you connect to a file without specifying ro=true (e.g. Read Only=true) in the URL, the file is locked and you can’t connect to the file from another instance until the original connection is dropped. I assume since you are trying to connect to the file multiple times that you mean to connect in readonly mode. To do this, like I mentioned earlier, simply add ro=true to your URL and you should be all set. Note: you may need o restart your JVM for chnges to take effect. Let me know if that works.

  • Cant open embedded msg-files with Standard

    Hi,
    my problem is:
    I have embedded some msg-files into an pdf now I cant open the links to the msg-files with X Standard but
    I can open them with X Pro.
    The Problem is I need to get them opened with X Standard.
    When I try to open them with Standard he tells me something about the security-settings wont allow this.
    I already checked the security-settings and I have the option with " open in extern" activated and
    I dont got a blacklist.
    Is there a possibility to open the msg-files with Standard ?
    I would be very happy if you could write me a solution.
    Sincerly,
    David Scharlau

    Dale,
    Thanks for your reply.
    The problem is that I need to use the "fill" in the paint program.
    I have actually just been able to get the file to load into Appleworks paint after reading about using the .pict save. All looked good untill I tried to fill. What happens now is that the fill is very chunky and does not bleed thru at all. This makes it pretty useless at the moment.
    Same problem, with a twist now.
    Looking forward to any further ideas.
    Michael

  • I am using PSE 9. I had no problem opening my Raw files from my Canon Rebel XT  Now  I have a Rebel 5ti and pse 9 won't reconize the Cr2 files

    I am using PSE 9. I had no problem opening my Raw files from my Canon Rebel XT  Now  I have a Rebel 5ti and pse 9 won't reconize the Cr2 files

    See this faq:
    FAQ: Will Photoshop Elements work with my camera, or Why won't my raw files open?
    That will explain why each new camera model uses its own raw format. (.CR2 does not indicate a format, only a Canon family of formats).
    The first link tells you what version of camera raw is needed for your camera : https://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    You need ACR 7.4
    The second link tells you which ACR versions are supported by Elements versions Camera Raw-compatible Adobe applications
    PSE9 supports version 6.5
    Further down on that paper, you get links to download the free Adobe DNGconverter for Mac or Win.
    This standalone software can batch convert a whole folder of raw files to the DNG raw file format that your present PSE9 can read.
    Otherwise, you would have to upgrade to version 10 or later.

  • Why can't I open ccitt g4 compression tiff files with ps6? and could open theses same files with ps3?

    Why can't I open CCITT G4 compression , TIFF format files with PS6?  I used to open these same files with PS3.   Can anyone help me out with this????

    This is what I get when trying to open ccitt G4 compression files. Tiff format.   Thanks for trying to answer my question and Problem.  I found a site where supposedly I can download a plug in into photoshop 6 that will open the files.  don't know if it will work but am gonna try it.

  • I cannot open a pdf file with aole-mail. I can open pdf files from windows explorer. I have associated pdf with adobe reader. My operating system is window

    I cannot open a pdf file with aol e-mail. I went to preferences in Adobe Reader but did not know what to enter for Incoming IMAP and outgoing SMTP. I can open pdf files from windows explorer as  I have associated .pdf files with adobe reader. My operating system is windows 7.
    When I try to open the pdf file within aol e-mail I get a message: 'Your security settings do not allow this file to be downloaded'.  I have not changed my security settings (Tools, Internet Options, security).

    Or http://helpx.adobe.com/acrobat/kb/pdf-browser-plugin-configuration.html

Maybe you are looking for