Problem opening PSCS5 32 bit - Photoshop.exe Entry Point Not Found

I am having a problem opening 32 bit version of Photoshop CS5 in Windows 7. The 64 bit version opens fine, but when I try and open the 32 bit version, the following window opens: “Photoshop.exe – Entry Point Not Found” X The procedure entry point_CFCreateApplicationRepositoryPath could not be located in the dynamic link library CoreFoundation.dll. My only option in this window is an OK button. If I click this button several times, the program eventually opens. Below is screen shot of the error window.
Thanks,
Matthew Kraus

Thanks Zeno and others. Uninstalling Quicktime and then reinstalling it was the fix.
Thanks again,
Matthew Kraus

Similar Messages

Owl Orphanage: Photoshop.exe - Entry Point Not Found

Using Photoshop CS5 64 bit on Windows 7. New problem recently started. Whenever I try and open PSCS5 I get the following error. I then click OK and PS opens without further problem.
OWL Orphange: Photoshop.exe - Entry Point Nont Found. The procedure entry point ONPreviewLayerRelease could not be located in the dynamic link library ONImaging.dll. Any suggestions?
Thanks,
Matthew Kraus

Did you use their installer to install your copy of the plug-in?
This is the list of files put in place by OnOne Software's Perfect Resize on a Windows 7 x64 system for 64 bit Photoshop:
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)
05/17/2011 09:40 AM           112,640 ONPSEmulator2.dll
05/17/2011 09:40 AM           869,888 onOneCoreFoundation.dll
05/17/2011 09:40 AM           505,856 ONImaging.dll
05/17/2011 09:40 AM           101,888 ONDocument2.dll
05/17/2011 09:40 AM           411,648 onOneWelcomeDialog.dll
05/17/2011 09:40 AM           250,368 OnOneWidgets.dll
05/17/2011 09:40 AM           345,088 onOneToolbox2.dll
05/17/2011 09:40 AM         1,198,080 icuuc42.dll
05/17/2011 09:40 AM         1,409,536 icuin42.dll
05/17/2011 09:40 AM             3,072 icudt42.dll
05/17/2011 09:40 AM           237,568 glut32.dll
05/17/2011 09:40 AM           147,968 ONCore2.dll
05/17/2011 09:40 AM           272,896 glut64.dll
05/17/2011 09:40 AM           350,720 onOnePR7ProEdCheck.dll
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Panels\onOne
05/17/2011 09:40 AM               233 onOne Palette Config.txt
05/17/2011 09:40 AM             4,681 onOne.jsx
05/17/2011 09:40 AM           610,989 onOne.swf
C:\Program Files\Adobe\Adobe Photoshop CS5 (64 Bit)\Plug-ins\Perfect Resize 7.0 Professional Edition.plugin
05/17/2011 09:40 AM         1,145,344 GFAutomation.8li
05/17/2011 09:40 AM         3,138,560 GFFilter.8li
05/17/2011 09:40 AM         1,470,464 GFFormat.8li
05/17/2011 09:40 AM           317,440 onOneActivationToolbox.dll
05/17/2011 09:40 AM           411,648 onOneWelcomeDialog.dll
-Noel

Photoshop.exe - Entry Point Not Found (MSVCP80.dll)?

Hey guys, new to the board here and pretty much at the end of my rope.
Starting maybe 2 days ago I began getting quite a strange message when I tried to open Photoshop CS3.
I'd send a jpeg of the window but with photoshop down i'll settle for just typing this crap out:
Photoshop.exe - Entry Point Not Found
The Procedure entry point ?replace@?$basic_string@DU$char_traits@D@std@@V?$a llocator@D@2@@std@@qaeaav12@IIPBD@Z could not be located in the dynamic link library MSVCP80.dll
Now, that's a mouthful! Fortunately i'm at least computer literate enough to dig around on google.
After doing that, I came up with nothing. I found a replacement for the DLL that it's having trouble with, but that did nothing.
I then tried out a program called Registrybooster, which found quite a few problems with my registry but failed to correct whatever is causing this problem.
So I tried to backtrack a little bit and see if anything I had done since the last time the program worked (wednesday the prior week) had broken it. I had shut off some startup programs so i figured maybe that had something to do with it. Unfortunately undoing those changes had absolutely no effect at all.
I then tried out doing a repair install, which did nothing. After this, I did an uninstall and reinstall and... nothing.
Some extra info: I run windows xp home edition on this PC and have it updated to SP3.
I've had photoshop on it for about a year with no problems.
Hopefully someone can help me here. Almost every thread I located with similar problems via google either went unanswered or the answers given didn't actually help me out.
Someone save me!

Hi Chris, thanks for chiming in on my problem.
I'm doubtful of it being TWAIN/WIA caused, but will look into it. I have a wacom tablet and a canon scanner so who knows. What would you suggest I do to see if those two are causing anything in particular? (Not sure why they would as I haven't made any changes to the programs or hardware involved recently.)

HELP....Error Message...Photoshop.exe-Entry Point not found

Hello
I bought the Adobe Photoshop cc and it has been working great untill this morning when i tried to open it, i got this error message:
Photoshop.exe-Entry point not found
The procedure entry point
?terminate@struturalimageeditingYAXXZ
Could not be located in the dynamic link library Patchmatch.DLL.
I have tried to redown load but keeps saying that it is downloaded
Help please
Bobbi-Lee

Please follow the below mentioned steps let me know if they work:
1. Uninstall current Ps CC app, If there are any issues with CC uninstall then run the Cleaner tool to remove Ps CC :http://www.adobe.com/support/contact/cscleanertool.html .
2. Restart your system
2. Install Ps CC app from Creative Cloud
3. Do not launch Ps
4. Update to 14.1.2 via the Creative Cloud desktop application
5. Once the updates are successfully applied, Launch Ps CC to verify.

Error : Photoshop.exe - Entry Point Not found

I have downloaded Photoshop cs6 trial and when i click the Photoshop icon to open the software i get a window:
Photoshop.exe - Entry Point Not found
The procedure entry point GetLogicalProcessorInformation could not be located in the dynamic link library KERENEL.32.dll."
-Jitu

Install SP3. It's required in order to run Photoshop on Windows XP.
http://www.adobe.com/products/photoshop/tech-specs.html

Photoshop.exe entry point not found

any ideas please?

Nobody can tell you anything without proper system information and other technical details like the crash logs. Entry point errors usually point to incompatible drivers or missing system libraries.
Working with your Operating System’s Tools | Mylenium's Error Code Database
Mylenium

Photoshop.exe - Entry Point Not Found error

I updated Photoshop and Bridge CC last night. Afterwards, I was unable to open up Photoshop CC getting this error message. The box has a lot of jibberish but ends with "could not be found in the dynamic link library PatchMatch.dll
I can however open up Lightroom and ask it to Edit in Photoshop and it opens up doing it that way. I have Windows 7 64 bit and had never had a problem until last night.

So you're suggestion going thru Windows Control Panel to uninstall it. Then I can re-install it thru the Adobe Creative Cloud? Thanks for you reply. It did occur to me that it might be an installation problem but just wanted to get an additional opinion.

How do i fix the following message that appears when i open my computer :- Apple Sync Notifier.exe Entry Point not found the procedure entry point sqlite3_wal_check point chould not be located in the dynamic link library SQLite3.dll

Apple Sync Notifies,exe.Entry point not found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll
I have uninstalled Itunes 10.4 shut down and installed Itunes 10.4 and still get this message on opening? How do i fix this problem?

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Now paste it in the folder C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Restart the programme, it should not display that message, it should be clear.
Good Luck

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

My iTunes won't open on Windows XP. iTunes.exe - Entry point not found, Error 7 (Windows Error 127)

When I open iTunes, I get a message saying under iTunes.exe - Entry Point Not Found, it says, The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. And I'm not talking about the AppleSyncNotifier.exe. Along with that, I get the message saying, "iTunes was not installed correctly. Please reinstall i Tunes." Error 7 (Windows Error 127). That's why I'm unable to open iTunes. I sure hope to see a solution to those problems soon.
I know I've mentioned this before, but I've now given a little more info to make my explanation more clear.

Try this one from Article TS3074
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074

ITunes.exe - Entry Point Not Found - QTCF error popup - can't open iTunes

Hi, whenever I try to open iTunes I also get this message:
iTunes.exe - Entry Point Not Found
The procedure entry point QTCF_CFUniCharGetUnicodePropertyDataForPlane could not be located in the dynamic link library QTCF.dll
I've tried uninstalling iTunes then reisntalling, uninstalling Quicktime, rebooted and I still get the same problem. I also moved QTCF.dll into iTunes. Still get the same error. I also tried a system restore, and I STILL get the same error.
I tried removing everything and turing off my antivirus and I still get this message and my iTunes does not work. Also when the message comes on it will not go away until I re-start my system. Any help out there on this???
Thanks.

*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

Itunes 11 will not open itunes.exe entry point not found

Every time I try to launch itunes this message box shows up:
iTunes.exe - Entry Point Not Found
The procedure entry point kCVKmageBufferChromaSubsampling_420 could not be located in the dynamic link library CoreVideo.dll
When I click ok another message box shows up:
iTunes
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 127)
I redownloaded itunes directly from apple.com. I clicked on the repair option. It completed. The error is still happening. I have been using itunes for over 10 years with no problems until now.
PC info:
Windows 7 32bit service pack 1 x86
3GB ram
AMD Athlon 64 processor 3500+ 2.20 GHz
NVIDIA GeForce 210 video card 2.2 GB
Also I used the Firefox browser to download itunes.

update:
I just restarted my computer. Now it seems to be working fine. Next time I update itunes I'll just restart my computer twice.

Since updating to 10.4 getting error message on startup 'AppleSyncNotifier.exe – Entry Point Not Found, The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'. How do I fix this annoying problem?

Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belle

This is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

When i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

when i open iTunes i get this message "iTunes: iTunes.exe - Entry Point Not Found" "The procedure entry point RefAudioFileWritePackets could not be located in the dynamic link library CoreAudioToolbox.dll." how do i fix this!

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
Does iTunes launch properly now?
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes

ITunes.exe - entry point not found - VideoToolbox.dll error - can't open!

hello, can somebody please help me...
Everytime i open iTunes it comes up with this error message:
The procedure entry point VTSelectAndCreateVideoDecoderInstance could not be located in the dynamics link libary VideoTookbox.dll.
I've tried uninstalling, reinstalling, and deleting all iTunes and Quickime files and programs but it still wont work...
Please help me, Thanks!

*Replying to smyth_m*
So I followed the instructions and downloaded the newest version of iTunes like it told me, but after I did that, When I would attempt to get on iTunes an iTunes.exe - Entry Point Not found messege would come up. And it says The procedure entry point sqlite3preparev2 could not be located in the dynamic link library SQLite3.dll.
That's a different one, smyth. At the moment, you could try basiam's workaround from the following post:
http://discussions.apple.com/thread.jspa?messageID=10444196#10444196
... however, this could possibly cause trouble in its own right next time you upgrade iTunes, given that there will be a misplaced, older SQLite3.dll in system32 ... So be sure to remember you've got that dll down there, and if you get an odd message about SQLite3.dll when you try launching iTunes *after your next iTunes upgrade,* delete the old copy of the dll in system32 and see if you get a normal launch without it there.

Problem opening PSCS5 32 bit - Photoshop.exe Entry Point Not Found

Similar Messages

Maybe you are looking for