Problem Opening the Editor
I have just installed Elements 9 and have been using it successfully for about a week. Last night I installed "Classroom in a Book, The official training workbook from Adobe Systems" and began the lessons. Tonight when I tried to open the Editor, I got the following message:
Microsoft Visual C++ Runtime Library
This application has requested Runtime to terminate it in an unusual way.
Please contact the applications support team for more information.
Then the entire program closes. I have no problem getting into and using the Organizer, but am unable to edit. I installed the updates hoping that would help and I have completely turned off the computer and removed the battery in hopes that would help, to no avail.
Can you help me with this problem?
Thanks.
Moving this discussion to the Photoshop Elements forum. The users in this forum should be able to provide suggestions for steps you can perform to resolve your difficulties.
Similar Messages
-
Whenever I open the editor in Photoshop Elements 12 it does not work. When I try to click open in the application it does not do anything. None of the buttons work. When I open a photo using file at the top it opens but I cannot edit it or use any of the features on the left side.
Hi Nealeh
Thanks i think I got it working of a fashion.
Except the replace colour, does not seem to end up with the colour I picked using the picker tool. Its as though it hads not replaced the colour but blended in the desired colour with the old incorrect colour!
Buy trial and error picking not the right colour but close - which when mixed with the existing colour is close.
Sorry I can't post the pictures as the Lingerie Mfg, has me under non disclosure.
The scenario is:- say a blonded mainly tanned model a high cut [at the hips] corsette style basque, with an ultra low bra line.
Our dear model, has just come back from St Barts with a fabulous Tan, and equally striking bold Tan lines!.
So we have great tanned legs, then the 'porcelain white band' where her swimsuit was.
Likewise we have a tanned face, and arms, shoulders etc and a great tan on the top of the cleavage, then it stops, white band to the top of the ultralow cut bra line of the basque.
She must have lived in like the most conservative bikini on the planet [50's style], for 2 weeks!
Had she had a normal skimpy bikini on, no problem!
If i don't solve it, she will get fired!
Not a lack of interest in your post, but I was out, and tried to log in to this site; which I could do, on my iPad Air / 5 [whatever its the new one]. And tried to 'sign in' - but it just hung at the
"Join Adobe Community" adobe sign in splash screen! with he little whell spinning around continuously!!!
I have Safari on this iPad. Guess that is all it runs.
So technology is not my friend today! -
Could not open the editor: The editor class could not be instantiated.
Yesterday FlashBuilder was automatically updated for Adobe updater and now Flashbuilder shows an error: "Could not open the editor: The editor class could not be instantiated. This usually indicates a missing no-arg constructor or that the editor's class name was mistyped in plugin.xml."
Bellow some lines of log error:
java.lang.NoClassDefFoundError: com/adobe/flexbuilder/codemodel/common/IMXMLConstants
at com.adobe.flexbuilder.mxml.editor.MXMLEditor.<init>(MXMLEditor.java:120)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java: 39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorIm pl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
at java.lang.Class.newInstance0(Class.java:355)
at java.lang.Class.newInstance(Class.java:308)
at org.eclipse.core.internal.registry.osgi.RegistryStrategyOSGI.createExecutableExtension(Re gistryStrategyOSGI.java:170)
at org.eclipse.core.internal.registry.ExtensionRegistry.createExecutableExtension(ExtensionR egistry.java:874)
at org.eclipse.core.internal.registry.ConfigurationElement.createExecutableExtension(Configu rationElement.java:243)
at org.eclipse.core.internal.registry.ConfigurationElementHandle.createExecutableExtension(C onfigurationElementHandle.java:51)
at org.eclipse.ui.internal.WorkbenchPlugin.createExtension(WorkbenchPlugin.java:259)
What is wrong!!!
I can't work without him!!!Just had this problem occur as well.
All the workspaces seem to now have the Flash Player Icons on the menu. They were not there before.
If I create a new workspace, it seems to work fine until I switch to any existing workspace and then the new workspace is also affected.
I can import a project from the other workspaces, into a new workspace and that works as well.
My only mental history is that all was well. Then I spent some time writing a project in CS4 for a day without any need for Flex Builder. Then when I returned to FLex Builder the last opened project would not run and although I can get to the new project screen, the next and Finish button although enabled fail silently.
Eclipse Galieo, Flash 4 Builder Plugin.
Not sure what path to take. Remove Flex Builder plugin? Exclipse? Certain files or hidden folders?
Any suggestions where to explore would be nice. -
I have another problem for migrating from Eclipse/Tomcat to Oracle Enterprise Pack for Eclipse/WebLogic. I got a message for a file "header.jsp":
"Could not open the editor: URLDecoder: Illegal hex in escape (%) pattern - For Input String: " =".
The error is for :
<img id="EFLogo" src="<%=EFLib.Pub.Logo %>" /> Where "EFLib.Pub.Logo is a public static variable.
The project works in Eclipse/Tomcat. It is also work for WebLogic. The problem is I cannot open and edit the file "header.jsp" and some other files with similar scriplets. What is wrong?
Please help.
Jerry
Edited by: 883301 on Sep 5, 2011 6:45 AMHi Jerry,
Looks like you've hit a bug in the code for the Web Page Editor (WPE) in the JSF Tools project of WTP. The design view of the WPE fails with an IllegalArgumentException in a call to the URLDecoder. I've filed a bug at Eclipse. See...
http://forums.oracle.com/forums/thread.jspa?forumID=578&threadID=2278517
https://bugs.eclipse.org/bugs/show_bug.cgi?id=356841
To work around this until the issue is fixed, you could open this file with the "JSP Editor" - just use the "Open With" context menu option.
Carlin
Edited by: crogers on Sep 6, 2011 11:44 AM -
I can not open the Editor in Photoshop Element 12
Hallo and sorry for my bad english!
I can not open the editor in Photoshop Elements 12.
After clicking the stands ".... only the workspace is loaded", but nothing happens.
After installation in May, he has about a month and suddenly no longer works.
What can I do?Version CS3
Adobe DNG Converter and Camera Raw 4.6 update
6.2MB
10/10/2008
Camera Raw 4.6 update
3.5MB
10/10/2008
Camera Raw 4.5 update
3.5MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.5 update
6.1MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.4.1 update
5.4MB
4/10/2008
Camera Raw 4.4.1 update
3.3MB
4/10/2008
Camera Raw 4.3.1 update
3.3MB
11/15/2007
Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
72.8MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.3.1 update
6.1MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.2 update
5.9MB
9/13/2007
Camera Raw 4.2 update
3.2MB
9/13/2007
Camera Raw 4.1 update
3.2MB
5/30/2007
Adobe DNG Converter and Camera Raw 4.1 update -
I have imported music from my ITunes in IMovie 11 but I cannot listen it. When I open the editor is ok but I just close the editor the music is muted. Can someone help me?
Thanks in advance.Do you have Logitech gaming software installed on the PC? If so, perhaps try the suggestion from the following post:
Re: Everytime I close Itunes it loads back up -
I have been trying to get elements 13 working for a couple of weeks, after many hours of chat with support and them using remote access, it has still not worked. However, having been on several websites I have made progress and it is now running as the trial version.
The organiser works fine but every time I open the editor, it asks me to sign in and requests the serial number followed by the message "verifying serial number" which disappears after a few seconds. The same thing happens every time I open it as if my serial number is not being accepted
Please helpInDesign CS2 will not be able to open PM files on XP SP3, Vista, or Win 7.
Bob -
When trying to open a PDF format using Adobe XI I get an error message that there's a problem opening the document (57)
Hi chasore,
Are you still facing this issue?
Is this issue happening with all the documents you have. If yes, i would suggest try uninstall and reinstall. Or if the documents are located on some shared drive try to copy them on local machine and test again.
Regards,
Ajlan Huda. -
When I click the Editor, it loads but does not open the Editor page. Options?
When I click the Editor, it loads but does not open the Editor page. Options?
Try making separate desktop icons for the Editor and Organizer. You can then launch directly. The standard desktop icon is for the welcome screen which often runs in the background or doesn’t shut down properly.
Start by right-clicking on the desktop and select:
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Photoshop Elements 13
Inside the Photoshop Elements 13 folder make sure you select the application (not a shortcut) by scrolling down to the files beginning with the letter P and highlighting ‘PhotoshopElementsEditor’
Then click next followed by finish.
You can repeat for the Organizer using the different file path.
New >> Shortcut
Then browse to:
C:\Program Files\Adobe\Elements 13 Organizer
Highlight ‘PhotoshopElementsOrganizer’
Then click next, followed by finish.
Now that you have your separate desktop icons you can delete the one for the welcome screen, if preferred. On Mac try launching directly from Applications. [if not using PSE13 substitute your own version and go to Program Files (x86)] -
[not solved] Error opening the editor - assertion failed
Hello everyone,
I began a project under Linux with Eclise and Flex builder alpha build 3.0.204732.
Everything's going fine under Linux but then, I wanted to access my project from Windows using Flex builder 3.0.2.214193.
If I do that, I receive the error: "Error opening the editor. Reason: Assertion Failed:"
Could you help me?
Thanks a lotup
-
I have been running elements 12 for a few months now....today when I tried to open the editor I get " Visual C C runtime error. I can open the organizer but not the editor
I'm keen to know if you get a response to this. I've been running Elements 12 for a year now, and suddenly my Editor is not working. I'm running Windows 8.1 and just get a message that says "The Editor is not working". Not very helpful.
-
There was a problem opening the catalog 'My Catalog' PSE 4.0
In the new PSE 4.0 I always get the message "There was a problem opening the catalog 'My Catalog'", then after pressing the start button again, the catalog starts. Is that the same error that was solved in Version 3.0 with the update 3.0.1.
That would be not very nice!!!! :(.
FraenzchenHave you done a catalogue recover?
File > catalogue > recover
Chris French -
I downloaded, and paid for, Photoshop Elements 13. At first I was able to open the editor only when I made an adaption to the Task Manager Processes(at the recommendation of one of the forums) but now I am unable to open the editor at all.
Can you try opening Editor directly from the exe available at:
C:\Program Files\Adobe\Photoshop Elements 13\PhotoshopElementsEditor.exe
If it still does not open, are you seeing an error message when you try to open Editor?
Thanks,
Anwesha -
I have Elements 12 installed. When I am in the catalog, click on a photo, then want to open the Editor, I get an error message. If I click on Editor from the Welcome screen, I get the same error message. Why doesn't Editor work? Thanks.
You'd better ask in the Elements forum.
Photoshop Elements -
I cannot open the editor.
I bought the disc. Installed it, registered it and now cannot get into the editor. I was able to earlier. Following the forum discussion, I downloaded a trial version and put in my serial number. Of course it uninstalled the program I had loaded with the disc. I still cannot open the editor. What do I do?
gephart41
Please tell us what version of Premiere Elements that you have and on what computer operating system it is running on. If your "editor" represents Photoshop Elements, you have posted in the wrong forum.
Whatever the case, I would start with a "clean slate". Uninstall the program via Control Panel route, do a ccleaner run through to get rid of any leftovers from incomplete uninstalls reinstalls, and the reinstall the program with anti-virus and firewalls disabled.
CCleaner - PC Optimization and Cleaning - Free Download
The above is assuming a Windows computer in use. Suggestions will be fine tuned after you supply the appropriate background information regarding program and computer.
Also, please review the content of the following blog post on Photoshop Elements and Premiere Elements Editor not opening...
ATR Premiere Elements Troubleshooting: PE12: Premiere Elements 12 Editor Will Not Open
We will be watching for your follow up information. If this is a Photoshop Elements based question, you should post your question in the Adobe Photoshop Elements Forum or wait for a moderator here to see your thread and move it from here to there.
Photoshop Elements
Thanks.
ATR
Maybe you are looking for
-
SSO from Portal to a ITS (standalone) to the R/3 backend
Dear all, I have the following situation: 1. I have successfully installed SSO between Portal and the Backend system. That works fine. PORTAL -> D98 (R/3 System with 4.7) 2. The backend system has no ITS because it's SAP R/3 4.7 without ITS. PORTAL -
-
okay so my ipod got disabled, so i had to restore it and i was wondering how to get my music from itunes to my ipod?
-
Install Adobe Photoshop CS4 on Mac
I have been trying to install Adobe Photoshop CS4 onto my MacBook Pro (2009 version) and it doesn't automatically popup to install. So i transferred the files to my "Application" on my mac. When i try to click on "Setup" an unreadable script appears.
-
A BPM process with out any human task
Hi All, I am new bie to BPM. Can I create a BPM process without any human task? Like start event, service task (or any other activity) & end event. If it is possible, please let me know the proper steps to execute and test this process also. Thanks,
-
Updating logs of output message of a delivery using custom program
Hi Experts, I have a requirement where in i need to create processing logs for a output message type of a delivery using custom program. So basically for a delivey a output type will be triggered , furhter i will develop a custom program which i will