Problem opening workbook with parameter LOV

hi,
i have created a parameter LOV that contains a huge amount of data. i have set the query timing in discov admin as well as desktop so that it comes fine there.
but when i try to open the LOV page in the workbook in viewer its giving me the error :- 500 internal server error.oracle.discoiv.beans.ParameterException: parameter lov timeout.
is there any way i can set the query timings in viewer?

Hi,
Try changing the ItemClassDelay parameter in your pref.txt file on the server.
Rod West

Similar Messages

Having problem opening files with gradients in CS2

When I try to open an illustrator 9 file from CS2, I get "An unknown error has occurred." message. I believe this may be a CS2 problem because when I checked further, I discovered that only AI 9 files where the gradient feature was used were affected. Any suggestions would be appreciated.

Hi Sjmitc, I followed Barbara's instructions about only about 24 hours ago and since then my files have been opening perfectly. I tried it again before replying to you and they are still opening fine.
I did have to go through my files a couple of times to find all the Elements preferences, but the solution is working fine so far. I will let you know if I have any further problems. It is maddening when it happens, so I hope you can fix yours.
Best of Luck
Date: Wed, 6 Nov 2013 18:23:28 -0800
From: [email protected]
To: [email protected]
Subject: Problem opening files with Mac OS Mavericks and Elements
    Re: Problem opening files with Mac OS Mavericks and Elements
    created by sjmitc in Photoshop Elements - View the full discussion
Henwen, Is this solution still working for you? I tried this same solution on mine a few days ago and had no luck. However, it actually let me open files this afternoon then when I went back in later today, it was doing the disappearing act again.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5821793#5821793
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5821793#5821793
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5821793#5821793. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Problem opening files with Mac OS Mavericks and Elements

I have recently installed Mac OS 10.9.x Mavericks. Since this I have had problems opening files in Elements 11. I upgraded to Elements 12, blindly hoping the problem would fix itself, however it hasn't.   When I try to open a file the Finder window pops up then disappears immediately. Occasionally it will stay open until I scroll down but then closes.   I keep the files on an external drive but the drive is working with all other applications, so I don't think it is that. If anyone has had a similar problem and has any ideas I would be grateful as the program is unusable for now. Thanks very much in anticipation

Hi Sjmitc, I followed Barbara's instructions about only about 24 hours ago and since then my files have been opening perfectly. I tried it again before replying to you and they are still opening fine.
I did have to go through my files a couple of times to find all the Elements preferences, but the solution is working fine so far. I will let you know if I have any further problems. It is maddening when it happens, so I hope you can fix yours.
Best of Luck
Date: Wed, 6 Nov 2013 18:23:28 -0800
From: [email protected]
To: [email protected]
Subject: Problem opening files with Mac OS Mavericks and Elements
    Re: Problem opening files with Mac OS Mavericks and Elements
    created by sjmitc in Photoshop Elements - View the full discussion
Henwen, Is this solution still working for you? I tried this same solution on mine a few days ago and had no luck. However, it actually let me open files this afternoon then when I went back in later today, it was doing the disappearing act again.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5821793#5821793
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5821793#5821793
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5821793#5821793. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Photoshop Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Problem exporting workbooks with Admin

Hi,
I'm using Discoverer Administrator 10.1.2.48.18
I have no problem exporting an entire EUL, it takes about 5 minutes, same with specific Business Areas. But, when I select a few workbooks, the export never ends; I have to cancel it after more than 40 minutes.
This is a feature I would use quite often, but it doesn't seem to be working well. I have to transfert those workbooks with Desktop one by one...when there's a few, I don't mind, but I now have a request for over 100 of them.
Would also be great to be able to backup our workbooks collection (more than 5,500).
Thanks.

Hi
A couple of thoughts come to mind. Firstly, you are on the base, buggy version of Discoverer. You need to upgrade to 10.1.2.2. or 10.1.2.3 and then apply the latest cumultaive patch. The upgrade is free so you should do it.
Secondly, 5,500 workbooks is a lot of workbooks and to me it sounds like you need to do some sort of cleanup.
Now to your issue. You say that a full export takes 5 minutes yet selecting a few workbooks takes a long time. This is most strange.
I'm not saying this is definitely the cause but you might want to try upgrading your Admin machine to 10.1.2.2 or 10.1.2.3. While from a versioing perspective you may not want to have Admin running a higher version for a long time I am told by Oracle that it won't cause any real issues to have Admin upgraded and the Application Server still on 10.1.2.0.2. Try installing Admin on a different machine then upgrading it and see if the export works. You'll then still have your original, just in case. Please also make sure that the machine has a minimumof 2 GB RAM as you will need that for a Discoverer Administrator machine to run well.
Best wishes
Michael

Error while running a Discoverer Workbook with parameter from command line

I am trying to run a discoverer report from command line and export the results in xls on to my local machine. I could do it fine for a simple workbook, but if I add a parameter(madatory) to the workbook and run it from command line specifying the parameter value I wanted to run the report for, I do not get any results. Here is the command line I am using.
dis51usr.exe /connect user/password@database /apps_user /apps_responsibility "System Administrator" /eul EUL_US /open C:\Disco\Test.DIS /sheet Testsheet /parameter Period Jan-07 /export xls C:\Disco\X.xls /batch
Parameter value is entered in correct format(Jan-07).
When I removed /batch from this to see if I get any error, Discoverer Desktop opened up, logged in and gets terminated saying 'Oracle Discoverer Desktop has encountered a problem and need to close. We are sorry for the inconvenience.'
Did anybody come across this issue before?

Hello,
If you have a few minutes, Windows is also aborting for me:
the differences are, my situation is:
a) am running the command line from a .bat file
b) am NOT running with parms, want the discoverer query to come up for the user
c) am running a query from the database
i am signing in as myself BUT running a query that was created by a generic user called SREG
c) if i run the .bat file from Windows Explorer, the query opens fine
d) if i execute the .bat file from within Microsoft Access using the shell command,
the query opens and then aborts RIGHT BEFORE the parm screen would display
e) btw, if i modify the .bat file, to run a query from MY database signon, then (d) - running .bat file
from vb using SHELL command works
Do you have a ideas as to why (d) does not work? I would be very grateful for your time, tx, sandra
this is what i posted yesterday, tx: Re: Running Discoverer command line
tx, sandra

Problems opening documents with Adobe Reader XI

I tried to open a file from my email account. I got a message from Adobe Reader XI that it could not open ecause it is either not a supported file type or because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded. I get this message with some documents which I have been able to open in the past and now I can't. I do not have Microsoft Office on my computer. I have Microsoft Word Starter 2010. I am a home user and this program works well as my Word software. I have downloaded a trial of Adobe Acrobat Pro XI and that hasn't solved my problem. Can anyone help me?

If you don't have Word but want to view Word docs, you can download and install the MS Word Viewer from http://www.microsoft.com/en-us/download/details.aspx?id=4.
In fact, istalling it may clear up the file association problem all on it's own.

Problem opening photos with camera raw 7.1 with Photoshop CS6

I am using Windows 7 32 bit system with 4GB ram and graphics accelerator.
I have Photoshop CS5.1 installed in the same system at it works perfectly.
What happens is when I use the B+W function, I get an error message saying that I have not enough ram.
After that, when I open the next photo with Camera Raw, the raw image will not open.
I have already maximised the Ram that Photoshop can use to 1.7GB and there is more than enough space in my scratch disk.
Anyone can tell me what the problem is?

Hi Noel,
Thanks for your reply.
Just to clarify.
I applied B+W layer adjustment on my photos. It is part of an automated set of actions which I apply to all my photos. I adjust the B&W layer to 50% overlay. When I click on the B&W adjustment layer, there is an error message that tells me I have not enough ram. Once that happens, when I open the next photo in raw, I don't see the new photo but only the frame of the camera raw though which I see my photoshop desktop.
It doesn't occur with the first few photos. But by the 3rd or 4th it happens.
I will adjust it to 50% and see what happens.
Leslie

Windows 8.1 - problem opening pdf with reader

Hi, I am using windows 8.1 (not touch). Every time I try to open a pdf with reader, it brings up a previous document and not the one i'm trying to open. As there are not many menu options with windows 8 I can only close it.
Can someone tell me what I need to do to be able to open pdf files. Thanks in advance

I am having the same problem. Did you ever get a workable solution or anxwer?

Database logon failed when opening report with parameter values in CrystalReportViewer

Hi,
I designed 2 crystal reports: report A contains parameter fields and report B did not contain any parameter
I can open both reports in development site using CrystalReportViewer control. When I open the reports in testing site,
I can open report B but can't open report A. It display error message "Database logon failed". When I set EnableDatabaseLogonPrompt
to true and try to open the report A again, it shows database connection data which was created on report.
In addition, it is strange that it displays error "Database logon failed" when I click an item in group tree panel of the report B. This indicates that it can load data from database
in testing site but it connect to development database when clicking items in group tree panel
All reports connect to database using Windows Authenication. It use dynamic database connection at runtime
How to ensure the report always connect database using login data dynamically at runtime?
Below is my code about database connection:
string strServerName = null;
string strDatabaseName = null;
ReportDocument rptDoc = new ReportDocument();
rptDoc.Load(strFilePath);
ConnectionInfo connInfo = new ConnectionInfo();
TableLogOnInfo logonInfo;
for (int i = 0; i < rptDoc.Database.Tables.Count; i++)
logonInfo = rptDoc.Database.Tables[i].LogOnInfo;
ReportHelper.GetReportConnection(ref strServerName, ref strDatabaseName, strSystemType);
logonInfo.ConnectionInfo.ServerName = strServerName;
logonInfo.ConnectionInfo.DatabaseName = strDatabaseName;
logonInfo.ConnectionInfo.IntegratedSecurity = true;
rptDoc.Database.Tables[i].ApplyLogOnInfo(logonInfo);
rptDoc.Database.Tables[i].Location = rptDoc.Database.Tables[i].Location.Substring(0, rptDoc.Database.Tables[i].Location.Length - 2);
crvViewer.ReportSource = rptDoc;
crvViewer.DataBind();
Development environment:
- SAP Crystal Reports 2013 Support Pack 1
- Visual Studio Professional 2012
- .NET Framework 3.5
- DDL
CrystalDecisions.Shared (v 13.0.8.1216)
CrystalDecisions.Web (v 13.0.8.1216)
CrystalDecisions.CrystalReports.Engine (v 13.0.8.1216)
Database connection in crystal report:
- Database Type: OLEDB (ADO)
- Provider: SQLOLEDB
- Integrated Security: True
Thanks and Regards,
Tony

Hi Tonylck
Try to pass login info to crystal report dynamically as follows:
using System;
using System.Windows.Forms;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
namespace WindowsApplication1
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void button1_Click(object sender, EventArgs e)
ReportDocument cryRpt = new ReportDocument();
TableLogOnInfos crtableLogoninfos = new TableLogOnInfos();
TableLogOnInfo crtableLogoninfo = new TableLogOnInfo();
ConnectionInfo crConnectionInfo = new ConnectionInfo();
Tables CrTables ;
cryRpt.Load("PUT CRYSTAL REPORT PATH HERE\CrystalReport1.rpt");
crConnectionInfo.ServerName = "YOUR SERVER NAME";
crConnectionInfo.DatabaseName = "YOUR DATABASE NAME";
crConnectionInfo.UserID = "YOUR DATABASE USERNAME";
crConnectionInfo.Password = "YOUR DATABASE PASSWORD";
CrTables = cryRpt.Database.Tables ;
foreach (CrystalDecisions.CrystalReports.Engine.Table CrTable in CrTables)
crtableLogoninfo = CrTable.LogOnInfo;
crtableLogoninfo.ConnectionInfo = crConnectionInfo;
CrTable.ApplyLogOnInfo(crtableLogoninfo);
crystalReportViewer1.ReportSource = cryRpt;
crystalReportViewer1.Refresh();
Ref
http://csharp.net-informations.com/crystal-reports/csharp-crystal-reports-dynamic-login.htm
Mark as answer if you find it useful
Shridhar J Joshi Thanks a lot

Problem opening email with space in subject

I have a report region which displays the date, who sent and subject of emaisl from the users inbox. If they click on the subject then Outlook is meant to open and display the email in full.
This works ok for email with only one word in the subject but gives an error when there is more than one word.
I have tried replacing spaces with %20 but without any joy.
An example of the html link generated is "<a href="outlook:Inbox/~test%20subject>test subject</a>"
Has anyone done this sort of thing and got it to work?
Fintan.
Edited by: Fintan Stack on Dec 8, 2010 7:19 AM

Has anyone done this sort of thing and got it to work?No. Didn't even know that it was possible.
<a href="outlook:Inbox/~test%20subject>test subject</a>
{code}
Is that *exactly* how it appears in the HTML? If so, generating the link so the href attribute is properly terminated might help:
{code}
<a href="outlook:Inbox/~test%20subject">test subject</a>
{code}

Problem opening reports with a user in the Oracle Directory.

I have already followed all the steps in the user's guide to run reports with a user in the Oracle Directory.
I accessed the enterprise security manager and created the mandatory xml publisher roles, besides I created another role. I added user A to the new role I created.
I accessed then the administrator tab in XML publisher. I went to roles and the role I created was there. When I tried to add a folder. I'm able to add the folder there. I click on apply and then when I enter in the security Settings again the folder is not there anymore.
I get the following error in the log:
[021207_103218621][][EXCEPTION] oracle.apps.xdo.servlet.resources.ResourceNotFoundException: /opt/oracle/infra2/j2ee/home/xmlpublisher
/Admin/Security/security.xml
When I access xml publisher with the user A, who belongs to the new role I'm working with, I'm not able to see any folder, nor anything else.
Do you have any ideas about what could be going wrong?
Thanks,
Joaquin

Can you replay how? I have been facing this problem for nearly 3 months without any solution. Please help me.
Debarati

[SOLVED] Problems opening folders with UTF-8 encoded characters

Hello everyone, I'm having an issue when I acess folders in all my programs ( except Dolphin File Manager). Every time I open the folder navigation window in my programs, folders with UTF-8 encoded characters ( such as "ç", "á ", "ó", "í", etc ) are not shown or the folder name not show these characters, therefore, I can not open documents inside these folders.
However, as you saw, I can type these characters normally. Here's my "locale.conf" :
LANG="en_US.UTF-8:ISO-8859-1"
LC_TIME="pt_BR.UTF-8:ISO-8859-1"
And here's the output of the command "locale -a" :
C
en_US.utf8
POSIX
Last edited by regmoraes (2015-04-17 12:55:19)

Thing is, when I run locale -a, I get
$ locale -a
C
de_DE@euro
de_DE.iso885915@euro
de_DE.utf8
en_US
en_US.iso88591
en_US.utf8
ja_JP
ja_JP.eucjp
ja_JP.ujis
ja_JP.utf8
japanese
japanese.euc
POSIX
So an entry for every locale I have uncommented in my locale.conf. Just making sure, by "following the steps in the beginner's guide", you also mean running locale-gen?
Are those folders on a linux filesystem like ext4 or on a windows (ntfs?)

Open page with parameter provided by browser

Hi,
there is a page built on a VO with a bind parameter p1.
in adfc-config i read the param p1 from browser's input :
<view id="page1">
<page>/page1.jspx</page>
<input-page-parameter id="__1">
<from-value>#{param.p1}</from-value>
<to-value>#{viewScope.p1}</to-value>
</input-page-parameter>
</view>
in order to immediately show the parameter-dependent data on page load,
what am i supposed to implement yet?
at the moment i have a button calling a procedure which sets default where clause and calls execute query...
but i'd like to see the refresh without pushing buttons
is it about placing function to a backing bean's method? which one? what stage?
or making additional setup in adfc-config?
what i've found is a peace of code, probably may help:
is that it?
<f:view beforePhase="#{MainPageBean.phaseListener}">
<af:document id="d1">
<af:form id="f1">
</af:form>
</af:document>
</f:view>
MainPageBean.java:
import javax.faces.event.PhaseEvent;
public class MainPageBean {
public MainPageBean() {
public void phaseListener(PhaseEvent phaseEvent) {
if (phaseEvent.getPhaseId().equals(phaseEvent.getPhaseId().RENDER_RESPONSE)) {
// To get the request header
FacesContext facesContext = FacesContext.getCurrentInstance();
HttpServletRequest request = (HttpServletRequest)facesContext.getExternalContext().getRequest();
String currentCustomerId = request.getParameter("p1");
please advise/comment on

grodno,
Something like this perhaps:
<view id="untitled1">
    <page>/untitled1.jsf</page>
    <input-page-parameter id="__5">
      <from-value>#{param.p1}</from-value>
      <to-value>#{pageFlowScope.A.a}</to-value>
    </input-page-parameter>
</view>and in your page definition, have an executable binding that calls a service method in your AM that takes a parameter. The service method would do whatever you need with the where clause. Bind the value of the parameter in the executable binding to #{pageFlowScope.A.a} (my managed bean) or you could even try just binding it directly to #{param.p1} - I didn't try that.
Or, if you could make this a bounded task flow (be sure to configure it to allow URL invoke), you could make a method call activity in the task flow be the default activity. This method call activity would be made by drag-and-drop the service method from above on to the task flow and bind the parameter to #{param.p1}. Then, control flow case from that method call to the view. Didn't test this either, but should work in theory.
John

Problem calling Procedure with parameter from Dynamic Page

I received an error saying the Page not found
here's how to reproduce the error.
1. Create procedure in portal30 schema.
Create or Replace PROCEDURE PORTAL30.ADD_TWO_VALUES
v_one IN NUMBER,
v_two IN NUMBER,
v_result OUT NUMBER)
as
begin
v_result :=v_one+v_two;
end;
2. Create Dynamic Page with following code
<ORACLE>DECLARE
v_total NUMBER;
BEGIN
ADD_TWO_VALUES(:v_one,:v_two, v_total);
htp.p('The total is => ');
htp.p('<input type="TEXT" VALUE='||v_total||'>');
htp.para;
htp.anchor('http://<machine.domain:port#>/pls/portal30/PORTAL30.DYN_
ADD_TWO_VALUES.show_parms', 'Re-Execute Procedure');
END;</ORACLE>
3. I clicked on Customize Link and entered 2 numbers as values for v_one and v_two.
4. Got "The page cannot be found" error in I.E. or "The requested URL /pls/portal30/PORTAL30.DYN_SAMPLE_ADD.show was not found on this server." on Netscape
However when I subsitute "ADD_TWO_VALUES(:v_one,:v_two, v_total);" in the dynamic page for "ADD_TWO_VALUES(3,2, v_total);", it runs just fine.
What's wrong here? Can I not use a parameter from a dynamic page and call a procedure with it? Help is needed urgently and will be greatly appreciated.
-Ahsun

Hi,
I tried with your code with few changes ,please try with them.
Create or Replace PROCEDURE <myschema>.ADD_TWO_VALUES
v_one IN NUMBER,
v_two IN NUMBER,
v_result OUT NUMBER)
as
begin
v_result :=v_one+v_two;
end;
I created the procedure in <mySchema> and granted that to <application_schema> and made some changes
<ORACLE>
DECLARE
v_total NUMBER;
BEGIN
<procedure_schema>.ADD_TWO_VALUES(:v_one,:v_two, v_total);
htp.p('The total is => ');
htp.p('<input type="TEXT" VALUE='||v_total||'>');
htp.para;
htp.anchor('http://<your_host>/pls/<portal_schema>/<application_schema>.DYN_FOR_OTN.SHOW_PARMS', 'Re-Execute Procedure');
END;
</ORACLE>
Hope this helps.
rahul

PROBLEM OPENING iTUNES WITH NEW VISTA

I have brought a new laptop that has vista, after downloading itunes, importing all my music from my external all was good for a while, now about every 5 or 6 days upon opeing itunes, a window pops up saying that itunes is importing my library, this takes about 10 minutes then when it does open it says that it has renamed it damaged library file and although all my music and playlists are there, alot of the artwork is missing, plus its bloody annoying.
Any advice.
Thanks
Jimmy

Try holding down the shift key as you start itunes, and create a new library when given the chance.

Problem opening workbook with parameter LOV

Similar Messages

Maybe you are looking for