Problem opening xcelcius 4.5 file

Hello,
I wrote an xcelcius file in version 4.5 and then I tried opening it in a different computer which also had 4.5 and I got the following error:
"Invalid Version found PK. Crystal Expects version 1.1.0.2"
How do I make it work?
Thanks,
Isaac

I've only seen this happen on 2 occasions:
1.) Opening an Xcelsius file in Xcelsius 2008, saving it in 2008, and then attempting to open it in 4.5
2.) Accidentally opening a non-Xcelsius file in the application.
This is a just a guess, but was the file opened and saved in Xcelsius 2008? If so, attempting to open it in 4.5 again will show the error.

Similar Messages

Error: "We're having a problem opening this location on file explorer. Add this website to your trusted sites list and try again"

Hello,
When i try to open document library from SharePoint Production portal then it throws the specified error. However, when i open document library from SharePoint Development portal then it opens it in file explorer quite easily.
Production portal is on https whereas development portal is on http. Also, UAG has been configured on production portal.
Any idea where it's getting stuck up? Surely, this is not a browser issue on Windows 7 as it's opening the development portal's document library on the same machine.
I've also done following things:
- Configured Desktop Experience on production environment
- Installed the hotfix for Windows 7
Regards,
Sohaib
Sohaib Khan

Hello Sohaib.
Here is the list of causes defined here.Hope it helps you
The cause and the resolution methods are the following:
Cause: There is a missing Root site collection...
Resolution: Check and ensure, that the “Managed Paths” are not changed in the web Application’s page, there is a (root) explicit for
this web application and there is a working Root site collection.
If for any reason this is not the case in your environment, you may try the following:
- Apply (if not already) the following Hotfix to one of those clients:
Error when you open a SharePoint Document Library in Windows Explorer or map a network drive to the library after you install Internet Explorer 10 in Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/2846960
Then, try to delete the cache of the IE browser before reproducing the issue. Check the result..
- Try to temporarily disable the Antivirus and test again.
- Check if you have installed the Desktop Experience feature on the SPS13 server.
- Check if you face this behavior with all users, Or only with some specific ones, Or with all different client OSes..
Otherwise you will need to collect the logs to further analyze...
http://blogs.msdn.com/b/george_bethanis/archive/2013/11/04/sps13-quot-open-with-explorer-quot-random-error-quot-we-re-having-a-problem-opening-this-location-in-file-explorer-add-this-web-site-to-your-trusted-sites-list-and-try-again-quot.aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Sharepoint 2013 explorer view error - problem opening this location in file explorer (HTTPS + Win7 Enterprise 64 bit + IE9 32 bit + Office 2007 32 bit)

Hi,
We have a problem using Sharepoint 2013 explorer view. (Error - We're having a problem opening this location in file explorer. Add this web site to your trusted sites list and try again).
I'm using Windows 7 Enterprise 64 bit, Office 2007 32 bit and IE9 32 bit. And the sharepoint site is a https site.
Some people in my organization are able to browse and some users getting the above error. (with the same client machine configuration)
If I clear my browser cache, closes the browser and open it then the explorer view is working. But after a minute if I try again I'm getting the above mentioned error. This 1 minute expiration happens is since the first time I have used explorer
view, not since I opened the browser.
I have tried the following on my machine:
1. Modified the web client service to run automatically.
2. Verified the sharepoint site is part of trusted sites (https://*.spsite.com/)
3. Compatibility mode is turned on.
4. Tried adding
AuthForwardServerList in the webclient registry settings under parameters. (restarted the web client)
5. Verified the BasicAuthLevel set to 1 (since we are using SSL). Tried setting the BasicAuthLevel to 2 as well. (restarted the web client)
6. Tried installing software update for web folders (KB907306).
Verified the below on the production server:
1. The web application has the root site collection.
2. It has WebDav Publishing disabled under IIS Web Server feature.
Could some one please help me in resolving this issue?
Thanks.

Hi Deepak,
According to your post, my understanding is that you failed to use "Open with Explorer" in a document library.
For your issue, please verify the following:
ActiveX controls must be enabled in IE.
As you are using Windows 7 Server as the client computer, you must install the Desktop Experience feature from Server Manager.
Make sure there is a working Root site collection.
Install this hotfix for windows 7 work with sharepoint 2013 :hotfixv4.microsoft.com/.../463266_intl_x64_zip.exe
Best Regards,
Eric
Eric Tao
TechNet Community Support

Problem opening 32bit HDR tif file

Hi
This is driving me mad. I've searched the forum and there are several similar posts, none of which solve this problem, so I'm posting a new thread.
Essential stuff:
CS5 v12.0.3 x32
Windows Vista 2G RAM
Memory usage in CS5 performance preferences set to 59% (I've tried everything from 10% to 90%)
Windows Virtual Memory set to 4G
Scratch disk has 20G free
I've already tried deleting the preferences file
The file it can't open is a 32bit HDR tif, 135Mb (hardly huge). I immediately get the error "Could not complete your request because there is not enough memory (RAM)" - yes, I've goggled this but the suggested solutions don't help. It routinely opens 32bit HDR tif files of about 35Mb, so I'm guessing the problem is something to do with the file size.
If anyone can help I'd be eternally grateful
Thanks
Doug

2 GB isn't really a lot of RAM to have in your system by today's standards, though one would think it would be enough that you should be able to open a single 135 MB file...
What's the pixel count in that file?
How was the file created?
I just started a fresh copy of Photoshop CS5 32 bit and it seems to be taking about 200 MB in RAM, before opening any image.
Just guessing at the image size, I created and saved a 141,193,460 byte 32 bit TIFF file. Opening that file, peak memory usage by Photoshop (program and data) was a hair under 500 MB.
Given that your OS should be using no more than about 500 MB to 1 GB of RAM, this should still leave space available for you to open this one file.
Have you tried creating and saving another file of equal size, and opening that? Doing so could help determine whether perhaps the file you're trying to open is somehow corrupted, or whether it's a basic RAM problem.
-Noel

Problems opening up 2011 raw files in current Photoshop.

I'm having problems opening up some of my older RAW files in Photoshop CS6 and CC. It extends to both dng and cr2 files. They display as a monotone image, with no original color present. I can copy the files to another computer with CS5 and open them up there and they're fine, and I can resave them and they're OK. But this could be a looming problem. What's going on?

Ha! It's a camera profile thing, I have a profile for my IR converted 5D, and for some reason some of my files had that profile applied. If I opened it in a computer without that profile on it, it opened up fine. Thanks.

Any problems opening Illust. 10 files with illus. CS3?

I'm working on a logo in Illustrator 10 at home...my old g4 tower is running 10.3.9...
I'll be using these files on a new laptop, a MBP with leopard...I'll be upgrading to CS3 for Illustrator...
there won't be any major text files, just logo work...mostly type, an acronym...perhaps some mark design like circles, ovals, squares, etc...
anything i need to know about now that won't work when I upgrade and transfer these files to a new computer?...I just want to make sure I don't keep my client waiting while i have a nervous breakdown trying to open and use my files :-)
thanks for any advice...
M

Keep the G4 for backup in case things get out of hand. I'm like you are, still using v10 via OS10.3.9 and have concerns. Wade is correct about text, I believe Adobe rewrote the font engine in CS1 and there was some confusion on how to handle the transition. The problem with a triple upgrade like ours is: 1.) you're upgrading the CPU which affects peripherals and existing system applications like font management, 2.) you're upgrading from Panther to Leopard while totally bypassing Tiger, so there may be issues with missing updates ( although unlikely ) and some vendors not yet ready for Leopard, and 3.) Adobe is trying to keep pace with Leopard w/CS3, so there are probably issues that have not yet been discovered and some that have ( per Wade ). I've done some recent work with CS2 apps via Tiger ( OS10.4.1? ) and Apple's Mac Mini Intel based CPU and didn't perceive any real problems. But, again, those were just generic, education baed machines that didn't have print capabilities, font management, or outside peripherals ( probably the best way to run the system ).

Problems opening a certain CR2 files

Hi,Can anyone help with this one, in May last year I shot some images on a Canon 450D in RAW, when I imported them into Aperture, they showed the unsupported message, Apple then updated aperture and now they only open as a thumb nail, I thought I might have mistakenly shot these in sRAW so tried opening in the Canon software but still no joy. In the metadata it shows a pixel size of 170 x 256 but a file size of 15.55mb which really doesn't make sense.
Please help if you can.
Regards
Steve

There are 2 issues here that combine to cause them not to open: the way the files were written, and how much memory Photoshop will allocate for decompressing a single image tile.
Image Width: 14101 Image Length: 18206
Resolution: 400, 400
Bits/Sample: 8
Compression Scheme: PackBits encoding
Samples/Pixel: 3
Rows/Strip: 18206
Number of Strips: 1
The images are written as one huge image tile/strip that decompresses to something around a Gig per tile.
Decompressing that quickly is going to require allocating a buffer over a Gigabyte to hold the data. Photoshop sets some limits on how large a tile buffer it will allocate so that you don't wait hours for the OS and Photoshop to free up the required space. Yes, we really had user documents that were spinning for an hour or more trying to allocate the buffer space to decompress them, even on a 64 bit system with quite a bit of RAM - hence the limits. Your documents, written as a single huge tile, exceed the limits that Photoshop will allocate for a single tile.
The TIFF spec recommends that documents be saved in smaller tiles (though one line per tile is excessive). Even moving to a few hundred Meg per tile would allow Photoshop to decompress the image data successfully. Either you should choose different TIFF output options when scanning, or communicate to the makers of the scanner that they should read the TIFF specification and talk to Adobe about improving their TIFF implementation (which would send them back to me).
Also, the images are also written using PackBits (a run length encoding scheme) that is not a great compressor. Using LZW or Flate would have decreased the size of the files considerably (half the size, or better).
For the time being, you can use some of the libTiff command line tools to unpack and repack these files to work better with Photoshop and other applications.

Problem opening Samsung NX1100 SRW files in CS6 and Lightroom 4

I bought a Samsung NX1100 and want to shoot in Raw format. My CS6 Bridge and Photoshop will not open the SRW files though. I downloaded the lightroom 4 that came with the camera and that will not read the SRW files either. How do I access my SRW files?

I'm having much the same problem, except I'm shooting with an EX2F. I've tried reinstalling CS6 (I have extended) and updating to the latest patches, but no go. Photoshop and Bridge can see the files, but cannot open them or draw thumbnails for them. I have also tried installing the latest version of Adobe DNG converter, I get the same result with this.
I'm on a Macbook Pro, lastest OS with latest updates.
I saw on another thread somewhere that changing the file extension from .SRW to .CRW is the fix. I tried this with a couple of files but again I am still unable to open the files.
Apparently there's a raw converter for Samsung cameras but I haven't been able to find it. which is available on the Samsung website NX200 - DOWNLOADS | SUPPORT | SAMSUNG I don't know if it converts to JPG or another RAW format yet. Hopefully the link doesn't get wiped and it's useful to someone else.
EDIT: Looks like it's a standalone RAW developer. It only outputs jpg or TIFF.

Problem opening a scanned .tif file in CS4

Hi...Just got CS4 and am trying to use CS4 to open a picture that I scanned into the computer. I get this message "Could not complete your request because of a problem parsing the tiff file". The file is only 12,084 KB and 1702 x 2338. It will open in CS2 but not CS4. CS4 will however, open the scanned files that are smaller than 10,000 KB.
Any help is greatly appreciated.

Hi, is there a solution yet for this problem? I just upgraded to CS4 (from CS3) and now I have the same problem (Scanned tiff files, CS3 opens them perfect, CS4 gives error problem parsing the Tiff file.
thanks!

Having problems opening an SSIS solution file

I have to make some changes to an SSIS package that was last modified in 2009 by a person who has left the company.
I am having problems finding a version of Visual Studio that will open the SLN file. I do not know how the package was originally maintained.
Yesterday, I was able to right-click on the SLN file and select 'version selector', that opened the solution in VS 2005 without me having to select a program. I made some changes and saved, rebuilt and ran the package.
Today when I try to open the SLN the same way, it displays the screen with the various VS version icons on it, but no VS 2005 listed!
The bottom line, is I now cannot open the solution with any version of Visual Studio. If I can find another SLN file that will open, can I copy the modified dtsx file to that solution so all my work is not wasted? It took me 3 days work to modify this package.
Can someone please help, my deadline for this task is TODAY.
Here is the message I get if opening with VS 2005:
Here is the message I get if opening with VS 2010:
Here is the SLN file (It looks like it got modified because I'm pretty sure yesterday it said VS 2005 at the top):
Microsoft Visual Studio Solution File, Format Version 11.00
# Visual Studio 2010
Project("{D183A3D8-5FD8-494B-B014-37F57B35E655}") = "HPAddress_ExportData", "HPAddress_ExportData.dtproj", "{7EB5909F-6836-4B23-A121-9F623FB1C932}"
EndProject
Global
GlobalSection(SolutionConfigurationPlatforms) = preSolution
  Development|Default = Development|Default
EndGlobalSection
GlobalSection(ProjectConfigurationPlatforms) = postSolution
  {7EB5909F-6836-4B23-A121-9F623FB1C932}.Development|Default.ActiveCfg = Development
  {7EB5909F-6836-4B23-A121-9F623FB1C932}.Development|Default.Build.0 = Development
EndGlobalSection
GlobalSection(SolutionProperties) = preSolution
  HideSolutionNode = FALSE
EndGlobalSection
EndGlobal

Hi AllTheGoodNamesWereTaken,
Based on my test, if we open a solution file with lower version in a higher version Visual Studio (VS), it will use Visual Studio Conversion Wizard to update the solution to current version of VS. Then the solution file will also change to current version
of VS. If we open a solution file with higher version in a lower version Visual Studio (VS), it causes an error that “The version number in the package is not valid. The version number cannot be greater than current version number”. And the solution file still
use the original version of VS.
So it seems that the original version of solution file is lower than or equal to VS 2010. Since the VS is backwards compatible, we should use a higher version of VS (VS2010 and later) to open the solution file. Notice that we need open the solution file,
not the project file.
Besides, we can also create a new SSIS project in a higher version of VS, then add the packages with “Add existing package” option from File System. Reference:
https://www.blackbaud.com/files/support/guides/infinitydevguide/Subsystems/bbdw-developer-help/content/tkaddpackagefromexisting.htm
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Problems opening MS Office 2013 files

I Have MS Office 365 2013 Version. But I have problems with opening files like word, powerpoint and excel. When ever I open the files, the corresponding one launches but the file does not open. Some times, even if the file opens (which is very rare), the
file stops responding in a minute or when ever I click enable editing. Please help me out with it.

Hello,
What if we choose to open files from File->Open->Computer instead of clicking the files directly?
This might be that Office applications are not associated properly. I would suggest you to do a repair of your Microsoft Office 365 and see what happens.
Follow these steps:
1.Click Start, click Control Panel, and then click
Programs and Features.
2.Click your Microsoft Office program, and then click Change.
3.Select Online Repair, and then click Repair.
Please have a try and feel free to post back with any findings/feedback.
Thanks,
Ethan Hua CHN
TechNet Community Support

Having problems opening up a raw file in photoshop elements 11

unable to open a raw file in ps elements 11

The EOS 70D was first supported in Camera Raw 8.2 which is only compatible with Elements 12.
You won't be able to open Raw files from the 70D in Elements 11.
Options:
Upgrade to Elements 12
Free: download the free Adobe DNG converter, convert all 70D Raw files to DNGs then open and edit the DNGs in Elements 11
Photoshop Help | Digital Negative (DNG)

(2ndPost) Problems opening a .fla (flash) file.

I was sent a link via email to download an .fla file. When it was downloading it said that the file may contain an application. Then when I check the file info, it says open with flashplayer (but the icon is older looking). I have updated my flashplayer but it wont open it either....
I removed an older version of flash player from my computer and the file tried to open.
this is what I saw:
*! You are opening the application "start" for the first time. Are you sure you want to open this application?*
The application is in a foler namer "ENU". To see the application in the finder without opening it, click Show Application.
-so I clicked show application and I saw a swf file and a flashplayer app named "start" version 7r14
im so lost...
I just want to open it, add sound and resend it with my revisions
can any one help?
also when I click "Open" instead of "Show Application", I see and the older flash icon and then my screen goes dark blue. The only way out is to commandoptionesc.
Message was edited by: DJ FROM CALI

Telling me to go to wiki is kinda rude. Although Wiki has some valuable info, it is sometime incorrect and therefore unreliable and unusable just as you answer was.
I don't know that Wikipedia is any more unreliable than your asking on a discussion list populated by total strangers and anybody can post here... (though I must say that both Wikipedia and this discussion forum have a fairly high level of commitment and quality considering both are conducted by self-assigned volunteers). If you're desperate to get your own paid employment assignment done by the weekend and are worried about reliability then consider hiring a Flash programmer.

Problem opening up internet pdf files

I cannot open pdf files from the internet. If I try to open one, only a small black square appears in the upper left corner. This has only recently begun. I have tried reloading adobe reader but the results remain

Try the suggestions here http://helpx.adobe.com/acrobat/kb/cant-view-pdf-web.html

Problem opening a sheet music file on Script Editor

I have sone sheet music files but when I try to open them I get an error message saying that the dictionary of the extension or application is not scriptable and then I get another message saying that the Script Editor cannot open files in the Script Editor Document format. I have no idea what that means. I think they're MUS files, if that helps at all. Thanks.

Hi tracy,
This forum is for discussion qnd questions regarding Apple's productivity application AppleWorks.
Your question will have a better chance of a knowledgeable response in one of the other forums on this site, or on a forum elsewhere for the application that was used to create these files.
The filename extension .mus is usually a Finale Music Score, created by one of the Finale Music family of applications. You can find out more about Finale using the link in this post.
Regards,
Barry

Problem opening xcelcius 4.5 file

Similar Messages

Maybe you are looking for