Problem or Characterisc of EZ Media?

I purchase one EZMED 1HDX2TB LA in brasil, on network of 1GB the manager web console is very slow...the hard disk light always ON but no have traffic!, after some time the hard disk make noise, have one software read hard disk full integral time?, not have a clean firware with only linux edition?
Thanks for you attention,
I am from Brazil, then sorry my english.
Vandir.

Hi vandirsr,
The EZ Media is one of our lower-end devices and has slower transfer speeds than our other devices. This may be why the web interface appears to be slow if your network is not the issue.
The device will stay active if you have any features enabled that access the device over the internet such as the Media Server, Personal Cloud, Remote Access, Time Machine, or any other protocols or features that require access to the device. You will also need to enabled the Power Down Drives feature from the Energy Saving page on the web management interface. This is the only way that the device will be able to power down the hard drive.
You should make sure that your firmware is up to date as well. You can download the update from the following link: Versão de firmware 4.0.8.23976 para EZ Media & Backup Center
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Similar Messages

Problems to Export to Adobe Media Encoder!

Hi, I´ve a problem to export to Adobe Media Encoder!
When in Premiere Pro CS4, I click in Files - Export - Media.. it shows a display saying: "An Adobe Media Encoder update s available for this version of Premiere Pro.."
But I´ve updated Premiere Pro CS4 to 4.21 and Media Encoder to 420! Both are installed!
And the display message s showed yet! So I cant send the project into Media Encoder by click, just if i open Media Encoder..
How do I solve this?
Because before I´ve updated Premiere Pro CS4, I´didnt have this boring message..
Thanks for your help!
Gustavo

Gustavo,
Though you have updated, it appears that the updater still thinks that you have not.
The first thing that I would do is follow the suggestion in the message. An alternative would be to close PrPro, and open Bridge, then choose Help>Update from there. Not sure why updating from Bridge seems to do things better, but it does for many.
This should do one of two things: actually do the update (maybe it only was applied partially? and clear the updater notification. I have had similar with Acrobat Pro, where it took three attempts to get the update to both complete and then to clear the notification messages.
Now, when I go to update from Adobe, I first shut off my AV, pop-up blockers and spysweeper programs. I trust Adobe.com, so do not want anything getting in the way. One more thing to do, prior to updating is to make sure that you have the very latest Adobe Flash Player installed. More and more, Adobe's installers rely on Flash Player.
That is all that I can think of now, other than Good Luck!
Hunt

Problems with Ipod and Windows Media Player PLEASE HELP

Ok i am not sure if this is the correct forum or not but i am having a problem. I have a Windows computer (Yes a windows computer please dont everyone yell at me) and i have a new ipod 30 gig video. Ok well when i put itunes on it changes all my music on my computer gets changed to AAC format and i cannot play music in windows media player. Ok well that is not my big issue. I make videos for church using windows movie maker and i cannot import music because nothing windows can recognize Itunes format which is AAC. well is there anyway so i can use itunes and still use WIndows Media Player and Windows Movie Maker... Any info will be greatly appreciated. THANKS ALL

I believe Quicktime Pro (which is available for Windoze) is capable of opening any WMP files and then you just export it as iPod format. That is how I get video onto the iPod. The Music and Videos all can be placed onto your iPod through iTunes.
So, if you are creating videos in your program, and want them on your iPod, then that is how you can do it.
Videos on your iPod have nothing to do with the formatting of your music. But, as the earlier post stated, change your prefs in iTunes to import as MP3. But, your videos HAVE to be in MP4 or M4V format to work on the iPod.
Good luck... and I'm a j3susfreak too

Problem exporting with Premiere Pro/Media Encoder CS4

Hey there. I've got 15-minute long movie edited in Premiere. Whenver I've tried rendering/exporting to see what the final product looks like, Media Encoder will usually freeze up about halfway through encoding. The time estimated/time elapsed will freeze, and if I cancel the encoding the program freezes up.
Other times I will get an error that says "encode failed because the source duration is nil". Not sure what that means, but the render arrows in the work area are never set to zero.
Additionally, I've tried exporting different lengths of the project only to have the same results, with Media Encoder failing each time.
Any suggestions on how to fix the problem?
My footage is in .mp4 format, and I'm also exporting to the same format. I've got numerous music and voiceover files as well. Resolution when exporting is 1280x720, and the max bitrate is 7.0mbps.
It seems more like a software problem than a lack of adaquate hardware, but I'm running a laptop with Windows 7 64-bit with a 2.0 GHz CPU and 8GB of RAM - I'm not sure how to find out what kind of video card I have.
Thanks for any assistance, it is greatly appreciated!

Some reading
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
My 3 hard drives are configured as... (WD = Western Digital)
1 - 320G WD Win7 64bit Pro and all program installs
2 - 320G WD Win7 swap file and video project files
3 - 1T WD all video files... input & output files
Search Microsoft to find out how to redirect your Windows swap file
http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

A problem with subtitles in windows media player

Hello, I have a old problem with Windows Media Player. In Windows 7 Windows Media Player
not accept subtitles and I download other program. Now i update my windows in 8.1 Pro. And
that problem aren't fix. Sorry for my English... What can i do for my Windows Media Player read subtitles?

Hello,
I'd ask in the
Windows 8.1 forum on Microsoft Community.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion':
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Problem to find the javax.media.jai package

hi everyone!! it's not the first time I ask this question, but i have troubles to find javax.media.jai..
I've downloaded the jai 1.1 and everything is fine... However, I have to use classes from the javax.media.jai... I made the import, and it doesn't find it, as if it doesn't exist... Someone tells me that the jai contained it, so why doesn't it find it??
i'm using a java version 1.2.. do you think that is the problem?
thanks a lot, and sorry for my bad english!!
Anne.

thanks a lot!!! it helps me but doesn't resolve my problem!! ;o)
you may be right,, it's a classpath problem. well i work under unix, so i have to give my classpath by the command setenv CLASSPATH ...
i didn't find the jai_core.jar in my JAI 1.1, I have only the BugFixes.jar...
I tried to download the latest version of JAI, and unfortunately i have a new problem with the .tar, i don't manage to "open" it... the command
tar xvf [archieve file] gives me some errors!!
so I don't know what I'm gonna do.... I think I'm going to ask someone to send me the package, or the specific classes I need, it would be more easier!!
Thanks
Anne.

Replication Problem "Encrypted file on unencrypted media" (CSS)

Hello,
since a couple of weeks, we have problems with the replicator. They use Eclipse-Imageanalysis to check the DDP-masterdata before they do the glass-mastering. Imageanalysis is a standard-software for replicators.
This software reports from time to time "Encrypted file on unencrypted media". This means, that files are tagged for encryption (CSS) but the images do not have or require any encryption on a DVD master, which is not prepared for CSS.
We use GEAR Mastering Pro to create DDP masters by the VIDEO_TS folder created by Encor, instead of creating DLT tapes with Encore. But GMP is not where this problem is coming from. GMP does not affect the tagged files. The files are already tagged in the VIDEO_TS folder. The problem is definitely created by Encore. We had this problem already with Encore 1.5.
Has anyone experience with this problem? Is there a work-around, or a possibility to check this tagging/flagging ourselves instead of waiting for the replicators error-message?
Thanks in advance
A.

@JBowden - I don´t need Encore to add CSS. I would never use Encore to master, never ever. Encore is so much unreliable. It´s better to use DDP images on disks (GEAR) instead of creating old-school and ultra-slow DLT tapes. Futhermore: A DDP can be veryfied and checked, a DLT not.
@Neil - Thanks. Well, i did exactly what Gear told, that means, we use SSCRST 4 / DDP 2.1. Is this 2048 or 2054? I am not sure, but i am sure that the VOBTABLE.DAT is always present, and this is typically for CSS - at least in DDP verson 2.0.
We create a big bunch of commercial masters each year, some with CSS and some without, all CSS-DVDs without problems, and some Encore-Non-CSS with this problem. The Gear company reports, that this problem is definitely caused by Adobe Encore, and that Adobe is not willing to cooperate in any way. This problem is present in Version 1.5 and in version 2.0.
Yesterday i bought the first Mac & DVD Studio Pro for our company. We have and had so much heavy problems with Encore and i spent so much money and time for the problems in it. If it will be better with the Apple software, we will drop Encore completely. Do you have experience with DVD Studio & Gear in combination?
Thanks
A

Premiere Pro CC rendering problems : can't see my medias anymore

Hello,
I started my first project on Premiere Pro CC, but it looks like PP CC isn't working well concerning rendering, I think I'm going to use my Premiere Pro CS6 again...
Sometimes, the rendering simply stops working : I can't see my output view anymore, only the "Media Pending". Removing media cache, rendering files, no effect. Closing the project and opening it again, still the same. Sometimes I can get the files back by selecting another rendering Engine, but after a few minutes, I loose my medias again.
I've seen the other post concerning preview files lost and the "empty sequence solution', but mine is different : I can't simply get the view back.
The other problem is that when I close PP CC, and try to launch it again, If first have to manually stop the PP CC process, which seems to be crashed as it doesn't completly stop.
Olivier

Ok, I just met a new problem, with the "unexpected MUTE" bug.
No need to answer my previous problem, I've decided to stop using Premiere Pro CC, which needs to be seriously fixed by Adobe teams. more than 60 euros per month for such a quality is a SHAME.
Let's switch back to PP CS6.

Big problems exporting a video in Media Encoder - detailed info

Problems with exporting media through Adobe Media Encoder.
Hi there. I am really confused now, writing this, cause my Premiere CS4 has worked pretty good the year I have had it.
So it has chosen a really bad timing to cause me problems.
I am working on a big musicvideo production. The whole video is now finished, and the labels and the artists are waiting for the video. But I’m facing big problems now. And I have tried everything to solve this, without succeeding.
·         When I export the video, the Adobe Media Encoder sometimes waits and waits and waits and waits, and nothing happens.
Screen shot:
·         When it does start, if goes to about 20%, and then it interrupts and give me "an unknown" error in the log-file:
Screen shot:
·         Sometimes when I open the project , it gives me the following message when importing the media files.
Screen shot:
·         The weird thing is that this only happens to the HD version. I have the same video in DV version, in a DV project, and it exports without any problem.
So PLEASE help me here, what shall I do??? I MUST finish this video!

And here is my log-file with all the attempts I've tried with different settings...
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD.prproj
- Output File: C:\Users\Pawel\Desktop\TheThingCalledLove-MasterCut-HD.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:12:58
2010-03-09 11:46:46 : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_3.prproj
- Output File: C:\Users\Pawel\Desktop\TheThingCalledLove-MasterCut-HD-1280x720.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:12:55
2010-03-09 14:09:21 : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
- Output File: L:\TheThingCalledLove.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:07:57
2010-03-09 14:24:41 : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
- Output File: L:\TheThingCalledLove_1.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
- Encoding Time: 00:07:38
2010-03-09 14:38:40 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
- Output File: L:\TheThingCalledLove.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
- Encoding Time: 00:06:21
2010-03-09 16:50:42 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_7.prproj
- Output File: L:\Sequence 02.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5300,00 [kbps]
- Encoding Time: 00:03:14
2010-03-09 17:10:49 : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
- Output File: L:\TheThingCalledLove_1.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
- Encoding Time: 00:07:34
2010-03-09 19:49:06 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_6.prproj
- Output File: L:\TheThingCalledLove.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, Audiences:1, Avg 5500,00 [kbps]
- Encoding Time: 00:07:35
2010-03-09 20:00:11 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_12.prproj
- Output File: L:\thu.wmv
- Preset Used: HDTV 720p 25 High Quality
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:30:15
2010-03-09 23:21:07 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD-nest.prproj
- Output File: L:\Sequence 02.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 01:35:20
2010-03-10 14:18:32 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD-nest_1.prproj
- Output File: L:\Sequence 02.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:11:16
2010-03-10 14:39:37 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD-nest_2.prproj
- Output File: L:\Sequence 03.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:24:50
2010-03-10 14:53:11 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_14.prproj
- Output File: C:\Users\Pawel\Desktop\Sequence 02.wmv
- Preset Used: Custom
- Video:
- Audio:
- Bitrate:
- Encoding Time: 00:29:41
2010-03-10 14:58:02 : Encoding Failed
Could not read from the source. Please check if it has moved or been deleted.
Could not write XMP data in output file.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_15.prproj
- Output File: C:\Users\Pawel\Desktop\Sequence 02.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, :0, Avg 6736,00 [kbps]
- Encoding Time: 00:13:57
2010-03-10 17:37:50 : Encoding Failed
Error compiling movie.
Unknown error.
Could not write XMP data in output file.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_16.prproj
- Output File: C:\Users\Pawel\Desktop\Sequence.wmv
- Preset Used: Custom
- Video: 1280x720, 25 [fps]
- Audio: 440 kbps, 44 kHz, 2 channel 24 bit VBR
- Bitrate: Compressed, VBR, 2 Pass, :0, Avg 6736,00 [kbps]
- Encoding Time: 00:07:55
2010-03-10 17:56:15 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_18.prproj
- Output File: C:\Users\Pawel\Desktop\Sequence 02.mpg
- Preset Used: HDTV 720p 25 High Quality
- Video: PAL, 1280x720, 25 [fps], Progressive, Quality 4,0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4,00, Target 10,00, Max 18,50 [Mbps]
- Encoding Time: 00:16:03
2010-03-11 08:52:52 : Encoding Failed
The Operation was interrupted by user
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_19.prproj
- Output File: C:\Users\Pawel\Desktop\TTCL.mpg
- Preset Used: HDTV 720p 25 High Quality
- Video: PAL, 1280x720, 25 [fps], Progressive, Quality 4,0
- Audio: 384 [kbps], 48 kHz, 16 bit, Stereo, MPEG
- Bitrate: VBR, 1 Pass, Min 4,00, Target 10,00, Max 18,50 [Mbps]
- Encoding Time: 00:12:04
2010-03-11 09:08:39 : Encoding Failed
Error compiling movie.
Unknown error.
- Source File: C:\Users\Pawel\AppData\Local\Temp\TumboTTCL3-HD_17.prproj
- Output File: C:\Users\Pawel\Desktop\Sequence.mp4
- Preset Used: Custom
- Video: PAL, 1920x1080, 25 [fps], Progressive
- Audio: AAC, 320 [kbps], 48 kHz, Stereo
- Bitrate: CBR, 32,00 [Mbps]
- Encoding Time: 00:01:08
2010-03-11 09:10:41 : Encoding Failed
The Operation was interrupted by user

Problema After Effects CS6 "inizializzazione media core"

Scusate ho un problema da due giorni ... Ho installato la versione di prova di Adobe Master Collection CS6: tutti i programmi funzionano bene, solo After Effects e Premiere Pro non funzionano. Io sono più interessato ad after effects, rimane con la schermata " inizializzazione media core" e non va avanti. Ho provato a disinstallarlo e reinstallarlo, ma non ha funzionato, l'ho disinstallato e installato quick time, ma non ha funzionato. Cosa devo fare?
ENGLISH
Sorry I have a problem for two days ... I installed the trial version of adobe master collection cs6: all programs work fine, only After Effects and Premiere Pro do not work. I'm more interested after effects, remains with the screen "initializing media core" and does not go forward. I tried to uninstall it and then reinstall it but it did not work, I uninstalled it and installed quick time, but it did not work. What should I do?

If it crashes due to text, remove any fonts you may have recently added. Otehrwise you should consider rebuilding your system. Sounds liek you realyl made a mess somewhere that cannot be resolved by just messing with AE, QT and your graphics driver. In particular stay away from installing any CoDec packs. K-Lite is known to cause a lot of damage to Adobe apps...
Mylenium

Problema con exportacion a adobe media encore

Hola amigos,
Tengo este pequeno problema cuando tengo ya finalizado mi trabajo en Premiere y quiero exportar por adobe media encore mi proyecto para poder quemarlo en un DVD por el adobe Encore, algunas veces exporta solo el audio lo cual esta mal y otras veces si exporta todo ok (video y audio) lo cual esta ok... alguien sabe porque es???
yo exporto en mpeg-dvd y lo hago en la mas alta calidad con VBR-2 (para que haga dos pases en el renderizado)
Esto del audio solo sucede cuando mando a exportar con esas caracteristicas pero el VBR-2 solo hace una pasada, porque hace eso?
Cuando hace las dos pasadas todo esta ok.
Porque puede suceder eso???

Hola! No se si llego muuy tarde, pero tal vez pueda ayudar a otros con el mismo problema.
Si queremos que el widget quede superpuesto a todos los elementos de la pagina damos clic en la flechita azul del widget y seleccionamos "superponer elementos" y si queremos lo contrario entonces lo des-seleccionamos.
Por otro lado si el que nos está dando problemas es footer (o pie de página) que aunque la página adapte adecuadamente su tamaño a las necesidades del widget él queda perdido en algún lugar del espacio donde no se supone que debe estar (superpuesto o por debajo) entonces vamos a "propiedades de la página" y en la pestaña maquetación des-seleccionamos la opción "pie de página adhesivo" de esta manera el pie de pagina se mantendrá constante con los cambios de largura de la página

Problems with FLVs and personal media player

We've created our own media player that will handle FLVs, SWF
and MP3 files. Its in the library as a linked item and we wrote a
class to handle everything for it. First we started coding for the
FLVs (not getting to the other 2 yet) and we're having problems
with them. Sometimes the FLV won't load at all, sometimes it will
stop about 2 to 3 seconds into the FLV and won't play anymore, and
100% of the time, if we go to a new frame (this is for CBT) and
load another FLV it won't show up at all. While IN flash, it will
load the first FLV, but when running it as a SWF or Published EXE,
its "sketchy" about loading even the first FLV.
the information is pulled from an XML file that has what file
it is, the position on the screen, etc. The FLV lives in the same
directory as the SWF file does as well.
To load in the mediaPlayer and FLV file we use this:
content_mc.addChild(new mediaPlayer(mediaFile, myType,
mediaX, mediaY));
the content_mc is an empty movie clip that just sits on the
stage so we can go through and erase all the children for the next
frame:
var mcNumChildren:uint = content_mc.numChildren;
for(var c:uint=0; c<mcNumChildren; c++) {
content_mc.removeChildAt(0);
I've attached the class for the mediaPlayer linked library
item.
does anyone know why this is giving me problems? we've had
everyone here look at it, and we just can't figure it out!

I believe Quicktime Pro (which is available for Windoze) is capable of opening any WMP files and then you just export it as iPod format. That is how I get video onto the iPod. The Music and Videos all can be placed onto your iPod through iTunes.
So, if you are creating videos in your program, and want them on your iPod, then that is how you can do it.
Videos on your iPod have nothing to do with the formatting of your music. But, as the earlier post stated, change your prefs in iTunes to import as MP3. But, your videos HAVE to be in MP4 or M4V format to work on the iPod.
Good luck... and I'm a j3susfreak too

Problem sharing iMovie project with media browser

Having prepared a movie in IMovie I tried to share it with media browser at 1020p HD. After 2 hours of processing I got the following error message. What does it mean and what can I do to fix? I shared at the mobile level and it worked.
"Unable to prepare project for publishing.
The project could not be prepared for publishing because an error occurred. (File already open with with write permission)"

I know what the problem is, it's related to Time Machine on laptops running the 10.7 Lion OS.
This requires using the Terminal app, in your Applications/Utilities folder
To turn off Time Machine snapshots type in the following command:
sudo tmutil disablelocal
The Mac will likely ask for your password, so type it in and hit the return key. The type the word, exit and hit return. Quit Terminal.
Open iMovie and try doing another export and see if the same error message pops up.

PRE7: Aspect Ratio problem even before opening source media file

Hi,
I am a newbie in Premiere Elements. Read a lot of threads with aspect ratio problems, but didn't find similar problem to mine, so decided to open a new discussion.
I am shooting video with Samsung HMX-H105 SSD camcorder, in 16:9 widescreen HD video.
When I try to make DVD from the MP4 file from the camcorder, it gets skewed even before opening it, when it is seen in the right hand pane with the Media file previews. I am not sure if somebody can understand what I am trying to tell so I have a screenshot of a video that I shot with my camcorder and a video that I have downloaded, shot by someone else with Samsung HMX-H20 in 16:9 HD as well.
So even when I start a new project in 4:3 and not 16:9 my videos always get stretched. This is why I think that maybe Premiere Elements doesn't understand the aspect ratio of my MP4 video files - it can be seen in the left hand side pane, where I have circled (with white elipse) the black stripes above and below the video.
Hope that somebody can help with my problem.

You ROCK
both of you
Thanks wine_snob for pointing me how to find the Interpret Footage option.
And thanks to Steve for solving my problem
In the "Interpret Footage" and "Pixel Aspect Ratio", the working video says: "Use Pixel Aspect Ratio from File: Square Pixels (1.0)"
but on my problem video it says: "Use Pixel Aspect Ratio from File: Other Aspect Ratio (1.778)", so I changed it to "Conform to: Square Pixels (1.0)" and now I have perfectly proportinal video for 16:9
Thank you once again!

Problems with DVD+R DL Media

Ok, got the new iMac G5 and it is awesome. Was testing the dual layer DVD burning capabilities this weekend and ran into some problems.
1) I had 2 Verbatim 8.5GB dual layer DVDs left over from last Christmas' attempt at using the LaCie drrive on my iMac. I burned 2 copies of a commercial DVD backup without ANY problems. My iMac worker PERFECTLY!
...then...
2) I went to Fry's Electronics and bought a 15-pack spindle of Memorex 8.5GB dual layer DVDs. The drive in my new iMac took a while to recognize the discs but would not accept them when I attempted to burn.
Does anyone out there have a similar experience? Are Memorex DL DVDs not a good brand of disc for the new iMac drive? What other discs work well (I know for a fact that Verbatim discs work VERY well, but they aren't widely available here in Orange County, CA)???
Chris

Most Memorex media is second class stuff and I prefer TDK. Although I do not have a DL burner, I have never had a coaster in several years.
A good website to check out media quality - as well as who really makes the media, not just who markets it - is here. My experience generally mirrors what they list.

Problem or Characterisc of EZ Media?

Similar Messages

Maybe you are looking for