Problem Oracle10G Installation in Solaris-x86

Hai,
I am facing problem when installing Oracle10g on solaris machine.
I created user and group for oracle and also changed some kernel properties.after changing all requirements i am trying to run runInstaller...but it gave exception like this ...
Exception:
Starting Oracle Universal Installation...
Checking Installation requirements...
Checking Operating System version :
must be 5.6,5.7,5.8,5.9 Actual 5.10
failed <<<<
exsting oracle universal installer.log for this session can be found at /tmp/orainstaller/datetime....
I am using ---
Oracle version : Oracle Database 10g Release 1(10.1.0.3) for Solaris x86
Solaris Version : Solaris 5.10
can any one help me out from this problem....
Thanks in advance ....
-Lakesh

Oracle 10G release 1 only support up to Solaris 9.
You probably need to install 10G release 2. The second release of major Oracle version is always more stable anyway.
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b15697/pre_install.htm#sthref110

Similar Messages

Re: RAC installation in Solaris x86 (VMWARE)

Hi,
I was trying to install Oracle RAC in solaris x86 via VMWARE tool . I installed node1 and node 2 but when node 1 running , unable to start node2 ,
showing error " failed to open virtual machine node-2 locking of attached media failed "
Result code: VBOX_E_INVALID_OBJECT_STATE"
I am feeling that this is happening due to shared folder but how to resolve?
Appreciate if anyone can help
Thanks in advance

I was trying to install Oracle RAC in solaris x86 via VMWARE tool . I installed node1 and node 2 but when node 1 running , unable to start node2 ,
showing error " failed to open virtual machine node-2 locking of attached media failed "
Result code: VBOX_E_INVALID_OBJECT_STATE"
I am feeling that this is happening due to shared folder but how to resolve?
Appreciate if anyone can helpfor installation what link you have fallowd..?please post the link...
refer below link...check any helpful to you...
https://forums.oracle.com/forums/thread.jspa?threadID=2153312

Please suggest the fastest way to install Solaris x86 PC 30 boxes

I've already tested one and it's successfully installed.
I have to install 30 boxes , all are same spec.
Please advise the fastest procedure to install.
Note : There is no sparc machine.

Only problem with imaging a Solaris x86 box is that your machines will end up with the same hostid (which is pseudo-randomly generated at Solaris installation time for x86). This may, or may not, be a problem, depending on what commercial software you use...
To avoid this, you have to use jumpstart, or do some serious hacking.

Installation of Solaris 8 (x86 Platform Edition

Hi guys,
I have downloaded the Solaris 8 for intel version and burnt them into CDs. (3 CDs). I tried to download the Solaris (x86 Platform Edition) Device Configuration Assistant Boot Diskette, but instead of downloading, it opens in another Internet explorer window. I tried pressing shift while downloading, that doesn't work. And also I tried to boot using the Solaris installation CD for installing, it says cannot boot from CDROM. Please help me. How can I proceed with installation?
With regards,
Amin

Well I had undergone the same problem, what I did was then use Netscape Enterprise Browser, and there is worked just fine, and was able to save the file onto my pc, without it being opening in an another window, so if possible use Netscape Browser and try and see what happens. Hope this helps you.
Samir Patel

Problem with ana 3.6 Installation on solaris 10

Hi,
I'm going to install Cisco Ana 3.6.5 on Solaris 10 and this is my first experience.
here are the information about my installation:
OS: Solaris 10 64-bit
Oracle 10g 10.2.0.3
I have installed Oracle and now when i try to install ana gateway , i get this Error Message:
- sheer doesnt exist, creating in /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf table space...
*** ERROR: Can not create table space /export/home/oracle/oracle/product/10.2.0/db_1/oradata/sheer_DATA.dbf. ABORTING. ***
could you please help me?
Thanks in advance

I've solved the problem by setting password for scheme sheer to cisco !
- Enter the Oracle sid: MCDB
- Enter the Oracle admin username: system
- Enter the Oracle admin password: ********
- Enter the password for the scheme sheer: cisco
- Enter the location of the data files: /export/home/oracle/product/db_10g/oradata
- Enter the Oracle Listener port: 1521

Install error for Oracle 10g on Solaris x86 64-bit. NETCA won't run

Hi All,
I'm installing Oracle 10.2.0.1 on Solaris x86 64-bit. I run the Oracle installer and all runs well until the NETCA portion of the install. It then errors (error file below). When i attempt to run NETCA outside of the installer i'm getting the same error output. I have verified my OS version and that all dependent packages are installed. I'm not sure what is causing this. Any help would be greatly appriciated.
thanks, dave
ERROR FILE:
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : 11 occurred at PC=0xFEEF24E8
Function=strchr+0x8
Library=/lib/libc.so.1
Current Java thread:
     at oracle.net.common.NetGetEnv.getDNSDomain(Native Method)
     at oracle.net.ca.ConfigureProfile.setDefaultProfileParams(Unknown Source)
     at oracle.net.ca.InitialSetup.setupConfigObjects(Unknown Source)
     at oracle.net.ca.InitialSetup.<init>(Unknown Source)
     at oracle.net.ca.NetCA.main(Unknown Source)
Dynamic libraries:
0x8050000      /data1/oracle/oracle/jdk/jre/bin/java
0xfefc0000      /lib/libthread.so.1
0xfefd0000      /lib/libdl.so.1
0xfeed0000      /lib/libc.so.1
0xfea00000      /data1/oracle/oracle/jdk/jre/lib/i386/client/libjvm.so
0xfee80000      /usr/lib/libCrun.so.1
0xfee50000      /lib/libsocket.so.1
0xfedc0000      /lib/libnsl.so.1
0xfeda0000      /lib/libm.so.1
0xfeeb0000      /usr/lib/libsched.so.1
0xfe9a0000      /lib/libm.so.2
0xfed50000      /lib/libscf.so.1
0xfe980000      /lib/libdoor.so.1
0xfe960000      /lib/libuutil.so.1
0xfe940000      /lib/libmd5.so.1
0xfe920000      /lib/libmp.so.2
0xfe8e0000      /data1/oracle/oracle/jdk/jre/lib/i386/native_threads/libhpi.so
0xfe890000      /data1/oracle/oracle/jdk/jre/lib/i386/libverify.so
0xfe850000      /data1/oracle/oracle/jdk/jre/lib/i386/libjava.so
0xfe830000      /data1/oracle/oracle/jdk/jre/lib/i386/libzip.so
0xf1a00000      /usr/lib/locale/en_US.UTF-8/en_US.UTF-8.so.3
0xfc780000      /usr/lib/locale/en_US.UTF-8/methods_en_US.UTF-8.so.3
0xf13c0000      /data1/oracle/oracle/jdk/jre/lib/i386/libawt.so
0xf0f90000      /data1/oracle/oracle/jdk/jre/lib/i386/libmlib_image.so
0xf0f30000      /data1/oracle/oracle/jdk/jre/lib/i386/motif21/libmawt.so
0xf0d50000      /usr/dt/lib/libXm.so.4
0xf0cf0000      /usr/openwin/lib/libXt.so.4
0xf0cc0000      /usr/openwin/lib/libXext.so.0
0xf1890000      /usr/openwin/lib/libXtst.so.1
0xf0c30000      /usr/openwin/lib/libX11.so.4
0xf0be0000      /usr/openwin/lib/libdps.so.5
0xf0a90000      /usr/openwin/lib/libSM.so.6
0xf0a70000      /usr/openwin/lib/libICE.so.6
0xf0a30000      /data1/oracle/oracle/lib32/libnjni10.so
0xefe00000      /data1/oracle/oracle/lib32/libclntsh.so.10.1
0xefc60000      /data1/oracle/oracle/lib32/libnnz10.so
0xf0a10000      /lib/libkstat.so.1
0xefc40000      /lib/libgen.so.1
0xefc20000      /lib/librt.so.1
0xefbf0000      /lib/libaio.so.1
0xefbd0000      /data1/oracle/oracle/lib32/libldapjclnt10.so
Heap at VM Abort:
Heap
def new generation total 576K, used 343K [0xf1e00000, 0xf1ea0000, 0xf22e0000)
eden space 512K, 55% used [0xf1e00000, 0xf1e467f8, 0xf1e80000)
from space 64K, 96% used [0xf1e80000, 0xf1e8f798, 0xf1e90000)
to space 64K, 0% used [0xf1e90000, 0xf1e90000, 0xf1ea0000)
tenured generation total 1408K, used 338K [0xf22e0000, 0xf2440000, 0xf5e00000)
the space 1408K, 24% used [0xf22e0000, 0xf2334ab8, 0xf2334c00, 0xf2440000)
compacting perm gen total 4096K, used 3580K [0xf5e00000, 0xf6200000, 0xf9e00000)
the space 4096K, 87% used [0xf5e00000, 0xf617f170, 0xf617f200, 0xf6200000)
Local Time = Tue Aug 29 13:49:22 2006
Elapsed Time = 225
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_05-b04 mixed mode)
#

I have the same problem on Linux Debian 3.0.
My /etc/hosts looks like:
127.0.0.1     localhost.localdomain     localhost
#192.168.100.1     bt.lan.home     bt
#192.168.100.5     jacek.lan.home     jacek
# The following lines are desirable for IPv6 capable hosts
::1     ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhostsPlease help.

Installation error Solaris 10-u6-ga1

I must be missing something really obvious on the installation of Solaris 10 U6. I've come up against the error message upon manually partitioning, and using UFS. After the install the error is:
Solaris 10 10 software installation partially failed
Solaris 10 packages partially installed
SUNWlur
Then at reboot it loops and loops
If I install using ZFS no problem. Unfortunately I have to use UFS for this install.
I pulled down the sol-10-u6-x86-ga1 dvd and installed on an Vmware to see what I'd get. If I manually setup the drive, it fails to with the same error.
Here is my drive layout both sparc server and vmware(x86)
/ = 10 Gb
swap = 10 Gb
/etc = 10 Gb
/usr = 10 Gb
/var = 10 Gb
/export=remaining drive space.
I'm I missing something obvious?
thanks
bill

There should be more information in the install log about why the one package failed. If you search for the package name in the log you should be able find it. Then that might help determine whether the package can be installed on its own, possibly fixing your reboot issue.
-- Alan

How to integrate a Solaris x86 server on Sun Management Center ?

Hello people,
I want to integrate a Solaris x86 server on Sun Management Center platform.
If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
/opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
I supose that in this directory, SunMC will install sparc binary files
At this point, I can't follow the installation and abort it.
Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
Thanks

Hi Hisham,
hishooooo wrote:
Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
Regards,
[email protected]
http://www.HalcyonInc.com

Solaris x86 11/06 hung on Acer TravelMate 8210 Laptop

I've just installed Solaris x86 11/06 on my Acer TravelMate 8210 laptop. The installation was completed successfully. However, when the system is rebooted into Solaris, it is always hung at:
�Use is subject to license terms.�
This problem happens with both of the 32-bit and 64-bit kernel. While booting with the option �-kv�, the system always stops at:
�PCI Express-device: pci8086,2448@1e, pci_pci0
pci_pci0 is /pci@0,0/pci8086,2448@1e�
I�ve also tried to boot with the �-s� option, but it doesn�t help.
Is there anything else that I can try? Thank you in advance!
Here is my system spec:
http://reviews.cnet.com/Acer_TravelMate_8210_6597_Core_2_Duo_2_GHz_2_GB_RAM_160_GB_HDD/4507-3121_7-32114677.html?tag=nav
Before the installation, I ran the Solaris Installation Check Tool 1.2, and it said that the system is able to run Solaris.

I've just installed the Solaris Express DE 2/07 and still have the same problem.
Message was edited by:
ductuanon

ZFS Configuration Question - Also posted in Solaris x86

Hello,
I have 2 x 140GB (hw Raid-0 + spare). About 20GB is allocated to Solaris on UFS (standard installation and partitions/slices).
I would like to allocate the 120GB left on the disk drive to ZFS. That space is not unallocated to any file system for now.
I found a lot of documentation of how to create a ZFS Pool on an empty disk drive. The documentation is less clear on how to do it on a drive already use by another FS.
Any help will be appreciated.
Michel

Darren,
I just setup another Solaris x86 server tonight to play with. That future production server is in it's own vlan wtih no Internet access for now.
The test server has the same configuration, but less disk space.
Here is the output of prtvtoc
# prtvtoc /dev/dsk/c0t0d0s0
* /dev/dsk/c0t0d0s0 partition map
* Dimensions:
* 512 bytes/sector
* 63 sectors/track
* 255 tracks/cylinder
* 16065 sectors/cylinder
* 2350 cylinders
* 2348 accessible cylinders
* Flags:
* 1: unmountable
* 10: read-only
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 10522575 27198045 37720619 /
1 3 01 16065 8401995 8418059
2 5 00 0 37720620 37720619
7 8 00 8418060 2104515 10522574 /export/home
8 1 01 0 16065 16064
Output of format
selecting c0t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
/dev/dsk/c0t0d0s0 is currently mounted on /. Please see umount(1M).
Total disk size is 8920 cylinders
Cylinder size is 16065 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
====== ====== ============ ===== === ====== ===
1 Active Solaris2 1 2350 2350 26
As you can see, the 1st partition is used at 26%. With fdisk, I can create a 2nd partition. My problem is to get that 2nd partiition availlable to Solaris and create a zpool in that unused space..
Michel

Solaris x86 on a mac, blank screen after miniroot but NOT when console=ttya

I am trying to install Solaris 10 x86 update7 on a Mac Mini.
It hangs with a blank screen right after loading the miniroot, before the "Configuring devices..." part.
I can't even see the miniroot loading completion (the hex addresses displayed when miniroot is loaded)... it
clears the screen and just hangs there.
But...
By trials and errors I discovered that if I use the ttya or ttyb console setting when booting, it does NOT hang!
It proceeds further, and prompts for type of installation and then for language. Unfortunately, since Mac Mini does not
have any serial port, I can't proceed with the installation since if I use console=ttya I can't use the keyboard anymore.
I ran the sun tool to check for hardware compliancy and it passed.
I think there must be something odd with the graphic card probe, what else could change when I boot with "console=ttya"
beside that? Is there a way to bypass the check for the graphic card when booting? I don't want to use it, either... I would
use the mac mini as a server, I wish I could remove the graphic card but it's embedded in the motherboard :-)
I do not have boot camp installed on this Mac. Could that make any difference?
I also tried to fire up opensolaris and that one works without problems, but I want Solaris 10 not opensolaris...
Any hint is greatly appreciated!!
Thanks in advance...
Rick

Hi Rick,
Like you, I have been trying to install Solaris10u7 on my 13" white Macbook. I got the same errors. Solaris10u6 used to work on this same machine, except for the lack of audio driver support.
I tried to connect a USB keyboard, but the same problem persist. Adding "console=text" or "console=keyboard" to the GRUB startup parameters did not help. But it does look like a console detection problem. Hopefully, there is a workaround. I'll check this forum post again to see if anyone comes up with a workable solution. I also prefer to have Solaris proper, not Opensolaris.
_After-thought_: Perhaps I'll just follow the developments on SXCE until 'Solaris 11' is released next year (hopefully sooner than expected). Older versions of SXCE did work well on the Macbook, though not the recent ones.
Alvin

Solaris X86

Hi guys
Can i use oracle 11g Solaris SPARC installation media on x86 solaris ? or do i have to use the linux instllation media .
thanks
AO

I see that this question is answered but if you are still following the thread I thought I might add the following info:
Solaris Operating System (x86-64)
http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201solx8664soft.html
Get both 10201_database_solx86_64.zip and 10201_companion_solx86_64.zip.
Trying to install the companion later may involve rolling back patches so installing it up front is a good idea.
Oracle 10.2.0.4 is patch id 6810189
OPatch is patch id 6880880
January 2009 Critical Patch Update is patch id 7592346
742060.1 Release Schedule of Current Database Patch Sets
-- Per note above there will not be a 10.2.0.5 unless things change after Oracle buys Sun.
-- Per note above there will not be 11.1.0.6 and 11gR2 may be first 11g on Solaris/x86.
555579.1 10.2.0.4 Patch Set - Availability and Known Issues
786800.1 Critical Patch Update April 2009 Patch Availability Document for Oracle Products
756671.1 Oracle Recommended Patches -- Oracle Database
8362683.8 Bug 8362683 - 10.2.0.4 Generic Recommended Patch Bundle #4
I hope you found this helpful.

Problems with installation on Windows XP Pro with SP1

Hi! I've two problems during installation.
I try to install Oracle 10g Enterprise
First:
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
Second:
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-15038: Unable to execute rule 'CheckServicePack' from ruleset 'ServicePackChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczServicePackChecks.checkServicePack' has thrown an unhandled exception [For input string: "Pac"]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: Install the recommended Service Pack.
What I should to do?
Message was edited by:
user465581

Hey Guys,
I am Srinivas Here who had been trying to install Oracle Database 10G on Windows X86 on Windows XP Professional.
If you have Win-XP Professional as your Operating System. Do not download the oracle Database using windows - XP Professional because XP will block certain installation files while downloading. In your machine install Windows 2000 or any other Windows version as a dual boot. First the download Database Zip files using your other version of Windows Operating system and then when you Unzip the files it will create a folder called Database and all the files will be present in it.If you want to store the same to cd for having to install the 10G Rel 2 database through CD then copy the contents of the unzipped database folder and store only the contents of the database folder and write them to CD's. Please see to it that while writing on cd's do not copy the folder itself .
After this, restart the system and get into windows XP Professional (Your XP Professional should be with Service Pack 2 in order to install 10G Database on windows XP - The Basic requirements for Oracle Database 10G on Windows X86).
I request you to check the software and hardware requirements from oracle Documents before you install the Oracle Database 10G on Windows x86 as well as Oracle Database 10G on Linux X86 or any other operating systems.
Finally, After you run the Oracle Universal installer in the last you will get messages for all products installed Success and finally it will ask the password for DBA and open the password management and give the password and reenter password and on the left you will have to unlock the items you would like to use.
In the last it will give you various URL links for Isqlplus, DBA, Enterprise Manager and a log report stored into oracle directory stored in your C:\Program files\Oracle folders. The correct link will be given at the end and you will have to watch the installation carefully.You can find DBCA and other options working. Try login in to Oracle through Command prompt, Sqlplus prompt availabe in Start ->Programs->Orahome10G->application Development-sqlplus as well as login through isqlplus link- Before this you should login at the command prompt as SYSDBA. YOU CAN SEE THAT YOUR DATABASE IS NOW WORKING IN WINDOWS XP PROFESSIONAL.
THANKS IN ADVANCE TO ALL FORUM MEMBERS WHO GAVE ME IDEA AND SUPPORT
REGARDS,
SRINIVAS

Problem with installation of Adobe Air 2.6

Hi,
I've got a problem with installation of Adobe Air 2.6 under Mageia 2 Linux. The installation stops with an error. Here's the install.log:
[Adobe AIR Application Installer:8550][ERR] Application Installer end with exit code 7
[setup:11894][INFO] Runtime Installer begin with version 2.6.0.19170 on Linux x86
[setup:11894][INFO] Commandline is:
[setup:11894][INFO] No installed runtime detected
[setup:11894][INFO] Relaunching with elevation
[setup:11894][INFO] Launching subprocess with commandline /tmp/air.HmUPbw/setup -ei
[setup:11894][ERR] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="/tmp/air.HmUPbw/build/opt/Adobe AIR/Versions/1.0/Resources/rpmbuilder error : symbol not found: parseSpec, /usr/lib/librpmbuild.so: undefined symbol: parseSpec error : + umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ exit 0;+ umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' /tmp/air.HmUPbw/build '!=' / ']';+ rm -rf /tmp/air.HmUPbw/build;++ dirname /tmp/air.HmUPbw/build;+ mkdir -p /tmp/air.HmUPbw;+ mkdir /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ true;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe;błąd: Nie odnaleziono pliku: /tmp/air.
HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml" errorID=1]
[setup:11894][ERR] Runtime Installer end with exit code 7
How can I solve this problem? Thanks in advance for help.

I'm not certain that Mageia 2 Linux is supported. This Release Notes page and this Install Help page don't mention Mageia, just
Fedora Core 12, Ubuntu 9.10, OpenSUSE 11.2.
Roy

How to integrate Solaris x86 server on Sun Management Center ?

Hello people,
I want to integrate a Solaris x86 server on Sun Management Center platform.
If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
/opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
I supose that in this directory, SunMC will install sparc binary files
At this point, I can't follow the installation and abort it.
Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
Thanks

Hi
From the Unix prompt enter oemapp console(for v9.x). If you are using earlier versions it is oemapp console (for starting the console) and oemapp dbastudio(for starting dba studio)
For starting OMS enter: oemctrl start oms.
Hope this helps
sarath

Problem Oracle10G Installation in Solaris-x86

Similar Messages

Maybe you are looking for