Problem ordering prints
Hello,
I tried to order prints from iphoto and my order was cancelled 3 times. I sent an email to Apple & received the following response:
Thank you for contacting iPhoto Customer Support.
Unfortunately we were not able to complete your order because some of your photos did not meet the recommended sizes. Since we cannot modify content after an order is submitted, your order has been cancelled, and you have not been charged.
Apple recommends using iPhoto or another image-editing application to adjust your images to the proper aspect ratio before submitting them. These are the recommended minimum image sizes:
4 x 6 print = 640 x 480 pixels
5 x 7 print = 1024 x 768 pixels
8 x 10 print = 1024 x 1536 pixels
16 x 20 print = 1600 x 1200 pixels
20 x 30 print = 1600 x 1200 pixels
Wallet prints = 320 x 240 pixels
Images that are not constrained to the aspect ratio of the print size you are ordering are automatically cropped during processing.
I have a Canon powershot sd500. Do I really need to crop all my photos before ordering prints?
Chris
Do I really need to crop all my photos before ordering prints?
In a word, yes. The prints must be in the same ratio as the print ordered so that you will get on the print what you see on the monitor. You can't squeeze pixels that are in a one ratio into a different ratio and maintain distortion free images. You'd have to squeeze or stretch some pixels to fit the new size. That wouldn't look good. It's just the nature of the beast.
Similar Messages
-
Problem in Purchase Order printing
Dear All,
I have some problem on printing purchase order.
Purhcase order contain service line. For all service line it should be print out in the layout.
But for this PO it doesn't print out all service item.
When i checked the table ESLL for this PO service item. it contains 2 entry records for header information.
Does anybody know how to fix it.
Becuase user want to fix it ~~~~
Regards,
LukeDear BK,
For print out PO, our system just using the sapscript only. How can i check it?
Dear GK,
The message status in ME22N / ME23N are green light which means that is completed, right?
Please kindly give more advise on it.
Regards,
Luke -
How do I find offending photo when there is a problem uploading photos to order prints?
How do I find offending photo when there is a problem uploading photos to order prints?
What is the problem? What version of iPhoto? Of the OS? Try safe mode
LN -
Problems with 'Order Prints' from Aperture 2.1.3 Mystery borders
*Some background:*
I've been using Aperture for about 3 months now, importing most of my iPhoto library into the program. I have only recently started shooting in RAW format, most of my photos image files are in JPG format. In the past, I've had no problems with obtaining prints from within iPhoto or to a limited extent Aperture. So, far as I know my program is up-to-date. I have 2 plugins installed: Aperture2twitter and *flickr export Lite* both of which work acceptably.
*The problem:* I ordered 317 4×6 prints from my aperture library.
Every photo has a 1/4″ border on both sides of the image, i.e. the printed image is only 4×5 1/2″. I have never ordered this quantity before, but I don’t believe that was the problem, it appears that the processing machine was misaligned and no one reviewed the prints prior to shipping.
I tried again, on 4 different images ... all JPG files with 3 out of 4 were OK, but one exhibited the "border" issue.
I haven't a clue what is going on here. Apple implied +(via email)+ that I would have to individually crop every photo to ensure proper aspect ratio. This makes no sense to me at all, as I have never had this kinda problem before.
Could the plugin(s) be interfering with the s/w? Is there a trick to having photos printed from within Aperture that was not present in iPhoto?
Any thoughts on what the problem is would be greatly appreciated.
Thanks
-johnI believe that I've solved this problem, with the help of the folks at Apple who handle Aperture tech support using the Aperture support ID that came with the product.
So the short answer is: Aperture print services REALLY DO REQUIRE the image to be cropped (constrained as they say) prior to the data being sent to Apple Print services.
Here is the link that describes cropping http://support.apple.com/kb/HT1993?viewlocale=en_US
The process as described is cumbersome, but the support tech pointed out that in Aperture, crops are 'non-destrutive' and can be undone simply by removing the check mark on the Adjustments tab of the image you crop. *This means that you do not have to make a duplicate image for cropping.*
So, here is the process that I arrived at to ensure that my "order prints" job turned out:
1. create an album of all the photos you want to submit for printing.
2. for each image call up the Crop HUD by pressing 'c' on the keyboard.
3.select the aspect ratio that you want for your photo. Make sure that it does NOT SAY Master Aspect Ratio, or Main Display Aspect Ratio.
4. Crop the photo
on the adjustments tab you can see the X and Y data and Height / Width information which can be undone.
5. Submit your print request to Apple for all the cropped photos.
When the prints arrive, you can compare the prints with the submitted photos. They should all be good. You can then delete the album (since it really is not a physical thing) or keep it for reference.
It all seemed a bit arcane to me, as I never had to worry about this in iPhoto. It must be that iPhoto sends different data than Aperture. I have just received 200 + prints back from Apple Print Services with about 98% success rate. I just have to adjust my thinking and my process when dealing with Aperture. -
I have problem ordering book. It is the first time then order book with Aperture. With iPhoto I never had this problem.
First: My appleid does not allow me to make order, I always get an error 'Try again later' but when work?
Second: After had used an other appleid (other family member) and order print started to upload images the system stuck and need to shutdown my macbook press the start botton.
Someone can help me?First: My appleid does not allow me to make order, I always get an error 'Try again later' but when work?
This may be caused by the tightened security requirements for your Apple ID. Apple now requires, that the answers to your security questions are at least six characters long, also the password must not be too simple. See the guidelines here:
Apple ID: Tips for protecting the security of your account
If your password and security questions do not match these rules, reset them at My Apple ID.
Second: After had used an other appleid (other family member) and order print started to upload images the system stuck and need to shutdown my macbook press the start botton.
This may happen, if one of the image files cannot be rendered. Is the preview of your book o.k., when you use the preview-book button on the order page?
Regards
Léonie -
PRINT BUTTON PROBLEM AT PRINT PREVu0130EW MODE IN ORDER FORM
I have prepared an order form as sapscript. I used " SAPFM06P " program.
But i have a problem, before printing, first i want to see the print preview of the form. Then i want to print at printpreview mode. But I can't press the print button at print preview mode. It is not active.
Can anyone help me?Hi.
Make sure that the 'Print Mode' property of the CR Viewer is set to 'ActiveX'.
Now, what you want is supposed to happen when you click the print button from the viewer.
If the printer is installed and the viewer could not find it, we will need to check why?
As don said, run [process monitor|http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/22316] and see what happens when you click the print button from the viewer.
- Bhushan. -
when i try to order prints i get an error message saying there is a problem with my network and my network is working. How can i solve this problem?
Try a different media. I have good luck using Maxell discs.
-
IPhoto 2014 Ordering prints, problems communicating with apple online store
iPhoto v. 9.5.1
When I'm trying to order prints directly from within iPhoto, i get this error "There was a problem communicating with the Apple Online Store. Please try again."
I tried:
- Booting from safe mode
- Calling tech support
- Reinstalling iPhoto
- This guide: http://b.rthr.me/wp/?p=356
The only thing that are partly working is changing country iPhoto > Preferences > Advanced > Print Product Store.
If i change from Denmark to Germany or UK, i get the check out screen - but I can't pay with a danish credit card or choose to have the package send to Denmark.
Any ideas?The following are two fixes posted by other users that helped them:
#1
go to the System/Sharing preference pane and make sure Remote Apple Events is checked.
If it is, uncheck it and then recheck and try ordering again.
#2
Quit iPhoto.
From the Finder menu bar, choose Go > Utilities to access your Utilities folder (or press Shift-Command-U).
In your Utilities folder, open Keychain Access.
Find the "NetServices" entry in your Keychain Access window.
Select the "NetServices" entry and press the delete key.
Reopen iPhoto and attempt to place your order again.
You should be prompted to enter your account information if you deleted the Keychain entry successfully.
After entering your account information, you should be able to complete your order.
OT -
I ordered prints from Apple. They came back with the people on both sides cut off. How do I correct the problem?
crop to the print size before ordering - for example you can not fit a 8x12 iomage onto a 8 x10 sheet of paper
LN -
Problem with ordering prints off iPhoto
Previously I had been able to order prints directly from iPhoto. When I tried today I kept getting the message "review account info", which I did. Billing, shipping, cc info is all correct. When I submit the order I just keep receiving the same message. I am currently using iPhoto 08 - 7.1.5. Is this outdated already?
No iPhoto '08 is not outdated - go to your account in the Apple store and re-enter (do not just verify) all of the information and try again
LN -
Problem in Print Out of Excise register RG1
Dear all,
We have a business scenario as follows:
1.Production Order Confirmation-101, 261 for receipt
2. Scrap Receipt-262.
For Scrap Sales:
The entry in RG1 should be Scrap receipt (262) and then despatch of scrap i.e issue(601).
During updation we do the following:
We receive scrap in RG1 register through RMA classification. Then we issue the scrap in RG1 register through IDH Classification. The register also get updated and extracted successfully.
Problem: While printing of RG1 register there is no entry for Receipt (262) and issue(601) of scrap.
Regards,Can anyone pls suggest how to capture Scrap sale in RG1.
-
Was wondering if anyone can help...I am not very computer friendly but want to be able to edit my photos, use them as jpegs, order prints etc. When I double click on a thumbnail ( am presuming the thumbnails are the small photos ) I get a grey screen with an exclamation mark on it. I cannot drag the thumbnail onto the desk top it just pings back. This doesn't happen with all the thumbnails and has been a problem since we upgraded to snowleopard. I recently reinstalled photos from the memory card from my camera and they are alright. I am presuming that the old photos are stuck in there somewhere if only I knew the right buttons to press to get them out. Thanks, Jane Thomas
Easiest: Restore from your back up.
Otherwise:
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
Basic, basic question - how to order prints from more than one album at onc
I am having two problems with iphoto - I would be most grateful for any help. First, when I go to upload my photos to a web-based printing company (like shutterfly or snapfish), and I click on the vendor's "browse" photos to find the album to upload, the way the photos come up does not correspond to my album titles in iphoto, so I can't find them. I have my photos sorted in labeled albums, and would like to upload them as such, but when I click on iphoto library, it brings up all kinds of other files that don't correspond to my current file labels. Can anyone help?
Equally irritating, when I use apple's "order print" features, it only lets me order from one album at a time. I'd like to order from multiple albums all at once, without paying shipping for each one. Any ideas? Again, most grateful for any advice.Hi, Sestew, and welcome to Apple Discussions.
Problem 1: Export the photos you want printed from iPhoto to a folder on the desktop. Use the printer's browser to navigate to that folder and upload them to the printing company from it. After uploading them, trash the folder that contains the exported copies. The pictures are still safe in your iPhoto library.
Problem 2: Create a new album and place all the pictures you want printed in it. (A photo can appear in any number of albums, so doing this won't remove any of the pictures from the other albums they're already in.) Then order that album printed. Delete the album after ordering, if you wish — the pictures will remain in whatever other albums you've placed them in. -
Purchase order print program error
hi experts!
am facing a problem in my purchase order print program. the problem is that when i am trying to see the print preview the following dump error is throughing, which am not able to understand.
the P.O total amount should be change into words( like one million then thousand thirty three kuwait dinars)
but the total amount is not converting into as mentioned, instead the dump is encountered.
please give me solution,
thnaks
*DUMP*
Runtime Errors CONVT_NO_NUMBER
Exception CX_SY_CONVERSION_NO_NUMBER
Date and Time 05.05.2008 19:04:43
Short text
Unable to interpret "1760,778.71 " as a number.
What happened?
Error in the ABAP Application Program
The current ABAP program "ZMM_SUBROUTINES" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_NO_NUMBER', was not
caught in
procedure "GET_AMT_IN_WORDS" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program attempted to interpret the value "1760,778.71 " as a number, but
since the value contravenes the rules for correct number formats,
this was not possible.
How to correct the error
Whole numbers are represented in ABAP as a sequence of numbers, possibly
with an algebraic sign.
The following are the possibilities for the representation of floating
point numbers:
[algebraic sign][mantissa]E[algebraic sign][exponent]
[algebraic sign][whole number part].[fraction part]
For example, -12E+34, +12E-34, 12E34, 12.34
If the error occurred in your own ABAP program or in an SAP
program you modified, try to remove the error.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"CONVT_NO_NUMBER" "CX_SY_CONVERSION_NO_NUMBER"
"ZMM_SUBROUTINES" or "ZMM_SUBROUTINES"
"GET_AMT_IN_WORDS"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"GET_AMT_IN_WORDS" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "EHPAP1"
Network address...... "10.100.150.103"
Operating system..... "AIX"
Release.............. "5.3"
Hardware type........ "00C3B3F04C00"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "EHPDB"
Database type..... "DB6"
Database name..... "EHP"
Database user ID.. "SAPEHP"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Mar 19 2007 20:40:49"
create on........ "AIX 2 5 005DD9CD4C00"
Database version. "DB6_81 "
Patch level. 102
Patch text.. " "
Database............. "DB6 08.02., DB6 09."
SAP database version. 700
Operating system..... "AIX 1 5, AIX 2 5, AIX 3 5"
Memory consumption
Roll.... 16192
EM...... 29328936
Heap.... 0
Page.... 1359872
MM Used. 19180992
MM Free. 1764848
User and Transaction
Client.............. 400
User................ "FADISULAIMAN"
Language key........ "E"
Transaction......... "ME22N "
Program............. "ZMM_SUBROUTINES"
Screen.............. "SAPLMEGUI 0014"
Screen line......... 22
Information on where terminated
Termination occurred in the ABAP program "ZMM_SUBROUTINES" - in
"GET_AMT_IN_WORDS".
The main program was "RM_MEPO_GUI ".
In the source code you have the termination point in line 398
of the (Include) program "ZMM_SUBROUTINES".
The termination is caused because exception "CX_SY_CONVERSION_NO_NUMBER"
occurred in
procedure "GET_AMT_IN_WORDS" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "ZMM_SUBROUTINES "; its source code begins in line
358 of the (Include program "ZMM_SUBROUTINES ".
Source Code Extract
Line SourceCde
368 DATA: lt_spell LIKE spell.
369
370 READ TABLE in_tab WITH KEY 'CURR'.
371 IF sy-subrc = 0.
372 lf_curr = in_tab-value.
373 ENDIF.
374
375 READ TABLE in_tab WITH KEY 'NETWR'.
376 IF sy-subrc = 0.
377 lf_netpr_01 = in_tab-value.
378 REPLACE ',' IN lf_netpr_01 WITH ' '.
379 CONDENSE lf_netpr_01 NO-GAPS.
380
381 IF lf_curr = 'KWD'.
382 lf_netpr_kwd = lf_netpr_01.
383
384 CALL FUNCTION 'SPELL_AMOUNT'
385 EXPORTING
386 amount = lf_netpr_kwd
387 currency = lf_curr
388 filler = ''
389 language = sy-langu
390 IMPORTING
391 in_words = lt_spell
392 EXCEPTIONS
393 not_found = 1
394 too_large = 2
395 OTHERS = 3.
396
397 ELSE.
>>>>> lf_netpr = lf_netpr_01.
399 CALL FUNCTION 'SPELL_AMOUNT'
400 EXPORTING
401 amount = lf_netpr
402 currency = lf_curr
403 filler = ''
404 language = sy-langu
405 IMPORTING
406 in_words = lt_spell
407 EXCEPTIONS
408 not_found = 1
409 too_large = 2
410 OTHERS = 3.
411 ENDIF.
412 IF sy-subrc <> 0.
413 * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
414 * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
415
416 ELSE.
417
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 17
SY-TABIX 1
SY-DBCNT 18
SY-FDPOS 1
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY NORMAL
SY-UCOMM PREVOUTPUT
SY-TITLE Held Imp. Pur. O r - ESG 5000000021 Created by Fadi Sulaiman
SY-MSGTY A
SY-MSGID TD
SY-MSGNO 426
SY-MSGV1 NEXTPAGE
SY-MSGV2 ZMEDRUCK_PO
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20080505
SY-UZEIT 190441
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXITHi Prasad,
Check the FM's
SPELL_AMOUNT --> for display in millions
HR_IN_CHG_INR_WRDS --> for display in lakhs and crores -
Purchase order print priview and spool print output are different.
Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview the TAX VALUES value is 120 coming..
when i am giving print with spool.. the amount value is showing TAX VALUE
is 443..why it is showing wrong..
this is for perticular output type.
why TAX VALUES are showing different in print view and
spool print.
help me.
regards,Hi Neil,
thanks for your reply.
but the valiadtions are happening in standard functional module PRICING.
it is realted script(medruck)...but there is no code point for spool or printer side..
and the issue is realted one PO OUTPUT TYPE..
it is sap standard debugging... when i am debugging the functional module PRICING.
the values are coming dynammically.
help me.
regards,
Maybe you are looking for
-
hi all In alv report out put the field heading is too long. So I want to disply the heading in two rows. Like April 2006 prior month personal, Is to be disply like in one row April 2006. And in next row prior month personal. Please send the
-
Download option is not working
my nokia x6 00 ,in Nokia Store option ..download option is not working Moderator's note: We have provided a subject-related title to help other forum users easily view and respond to this post.
-
External drive - full file or relocate original?
Hello, I have run into an issue where my Aperture file is now taking up too much space on my iMac(about 130gb). I have my external drive always hooked up to my iMac and have more then 1tb left, so I would like to transfer my file over to the extern
-
Prob - Transporting Alert Categories- Dev to QA - Urgent
We have a very wierd situation while transporting the alert Categories from Dev to QA. New Alert Categoires are created under existing Alert Classfications, when transported into QA from Dev, there are new alert classifications created with a new nam
-
El paquete DBMS_ASYNCRPC_PUSH aparece descompilado genera el siguiente error: PLS-00753: malformed or corrupted wrapped unit. ya se ha ejecutado los siguientes scripts ( utlrp.sql and utlprp.sql), se ha ejecutado los siguiente comandos Exec dbms_ddl.