Problem over storage section search

Hi all .
Actually , I'm facing a strange problem . When , I came to storage section search option , I got noticed that one of my warehouse's storage type               ( RES - reserve storage type ) pre- assigned with "Y" option while activating the storage section search option - that means storage section determination but no check ....
In storage type settings , I made " storage section check " option , remains unchecked . That's fine - but , the paradox , I did the same storage type setting for other storage type , and they showed as " blank " not Y ...
my question is why  it shows as Y , instead of blank ?
thanks in advance ............
regards
arghya

As a part of the customizing and implementation of WM, you need to check this customizing step.
When you activate the storage section check, you ought to check this step too, to make sure your
ST's have this setting as required.
So, the default values for this indicator are the following:
* On check (in ST settings) => set to X
* On uncheck (in ST sett.) => Set to Blank
I don't know if there is an option to set the default values for the actions in ST settings, but I highly doubt there are. Also, it seems that in your case it didn't change it at all, so it definitely isn't standard behavior of the system.
You need to test a bit more.
E.g. set to blank, and then activate the check, go back and see what is the result.
Then set to Y manually, then uncheck it at ST level. Again, return to check the indicator.
Now, don't change manually, but go again to ST settings and activate. Return to see the indicator value.
You can try a few more similar tests if you like...
This will give you an idea of what are the rules behind the ST settings => section search indicator (X,Y,Blank).
I have tried at two system now, and both of them behave exactly like I stated before.
Whenever I check ST section search, indicator is set to X.
When I uncheck it, indicator is reset to Blank.

Similar Messages

  • WM: Error occurred during storage section search (FGWM05 001)

    HI friends
                  i done GRN 101(movement type) with mb31 for production order ..based on TR Iam trying to create transfer order i have
    the below error. where i missed the configuration
    "Error occurred during storage section search (FGWM05 001)"
        Message no. L3 041
    Diagnosis
        No storage area search has been defined for this material and this
        storage type.
    Procedure
        Contact your system administrator!  Note down the material and the
        storage type listed within parentheses in the error message.
    with regards
    dinesh
    Edited by: code acess on Jun 28, 2011 8:30 AM

    Hi
    In WM customizing Please check for your warehouse/Storage type combnation the storage section search is on and valid.
    IMG>Logistics Execution>WM>Strategies>Storage section search
    if there is no entry then maintain it. The nest error may be storage bin. Make sure that you create storage bin for whsno/storage type/storage section combination by using LS10 or LS01N)
    Hope it helps
    Karthik

  • Storage section search

    Hi SAPERS,
    Please provide me the main roll of storage section search in WM configuration.
    Thanks in Advance
    prasad

    Hi,
    Try to find the answers for your query by searching in the forum using the SEARCH option.
    I am confident that you will be getting a lot of resources and answers and even more replies
    which will already helped in solving the issue and also definitely they will give you broad understanding of the topic.
    And also check the WIKI section of this forum there are valuable notes, configurations,etc.
    check this link for wiki section.
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/main
    https://wiki.sdn.sap.com/wiki/display/ERPLO/ERP+SD
    regards
    rithvika

  • Putaway in storage section 100 is not allowed

    hi,
    I am facing a problem
    while creatin a TO  i am getting an error Putaway in storage section 100 is not allowed
    All the strategy for the patricular storage type and the storage section is maintained in the config.
    Thanks in Advance
    Sunil

    your target storage bin  has a storage section 100 assigned.
    your material master has a storage section indicator.
    In OMLZ (storage section search) find the record for your warehouse and storage type having the storage section indicator from your material master, and check into what storage sections (below 1..., 2...., 3,,,) you can putaway the stock.

  • Putaway in storage section PA1 is  not allowed

    Hello,
    While creating TO against TR in LT04 system is giving error message as above said in subject line.
    I have checked in LX20 and LS04 bins are there even though still getting same error.
    Please let me know  what could be the reasion and solution for this issue.
    Thanks in advance.

    you get this error if the storage section check is made active in customizing transaction OMLZ
    here you first define one or more storage section indicators (also named storage area indicator).
    then you define a storage section search per combination of warehouse and storage type and storage section indicators  and assign the possible storage section  for this combination.
    in the storage bins (LS01N) you enter the storage section to which this bin belongs.
    in the material master you enter the storage section indicator
    if a bin is determined which has a storage section that is not among the listed storage sections from the storage section search then the error you have is issued.

  • Override the storage section check for manual entries

    Hi All,
    I am facing a issue on Storage section search.While creating To system is giving correct Storage section according t the settings but if I would like  to change the storage section to different storage section system is not giving any error message.It is giving only warning message check your enteries.
    So I would like know is there is config settings to avoid another storage section selcetion which are not assignned storage search indicator.
    I have checked in help.sap.com .I following information .
    To set up the strategy for storage sections, see the section on activating storage section searches under Strategies in the Warehouse Management IMG documentation.
    If storage section checking is active for the storage type, then the system searches in the storage type only for those empty storage bins in storage sections that have been allowed for the material being put away. When you are creating a transfer order and manually enter a storage bin, then the system checks whether the bin is in a storage section that is allowed for the material.
    *You can also make an entry in customizing that permits you to override the section check for manual entries.*_
    Can please advice me inorder activate the config for override the section check for manual entries or any warning message.
    Thanks & regards,
    Srikanth

    HI,
    Thanks for your reply.
    I want Error message.
    Regards,
    Srikanth P

  • New Storage Section set up in WM

    I had to set up some new bins in a new storage section, within an existing storage type in our warehouse.  I thought I had configured everything, but when we attempt to transfer batches from the old bin that is being retired to the new one, we get an error message stating:  Putaway in Storage Section XX is not allowed.
    I did configure it in the storage section search, and am wondering what else I missed.  I couldn't find any other strategy configuration that listed specific storage sections.  What am I missing?

    Jurgen,
    thanks, I really owe you, this was the second question of mine you've answered this week.  My error was that I had linked the new section to the section that the inventory is currently in.  I had to link it to the one indecated on Material Master, and it worked fine.  You rock!!!

  • How change Storage bin search logic in WM ?

    Hi All,
    Standard process to find bin during putaway in WM is as follow :
    First find storage type, then storage section and finally storage bin type.
    Is it possible to change slightly this logic as follow :
    Find storage type first, then with first storage bin type find a bin in storage section sequence, if not found try to found with second storage bin type within storage section sequence and so on.
    It's a kind of mix bewtween storage bin type search and storage section search.
    Thanks for advice !
    Patrice

    OK, so you want it to check all storage sections for available bin type "A" and only then loop back around and check for bin type "B" from the first storage section again.
    Storage bin type check is relative to the allowed Storage unit types per bin based on my understanding. During put away the system will check the allowed SUT in sequence based on your entries in your storage bin type search so it would loop within first storage section until it sees no available bin type that fits the allowed bin types (sequential) and only check second storage section (again sequential) when none of the allowed bin types are found available, so if I understand the available config options what you want is not possible without customization....check exit MWMTO003 - Customer-defined putaway strategy to create your own strategy

  • Storage section indicator functionality

    Hi All,
    Generally we are using Storage section search for WM in SAP.Previously by using this we restricting some goods movements to particular storage sections.But now this storage section search indicator functionality is not working .I have checked all configuration for storage section  search .Everything seems to be correct but this functionality not working .
    example: storage section indicator 001 should only be linked to storage section A, but  it is also possible to put away in storage section B ?? We have only added section A to 001.
    Can you please advice me what configuration settings needed  to revert back the settings.
    Thanks & Regards,
    Srikanth P.

    Hi
    Check wther the storage section check active indicator is set at storage type level.
    Storage section is used to further divide the storage type. It will be used only for Putaway process.
    Check the following also
    Storage section definiition for the wh no/storagetype combination
    Storage typw indicator to the wh no
    Material master storage section indicator
    Storage bins created with the storage section
    Hope it helps
    Thanks/karthik

  • Diff b/w activate storage section chk via menu path & OMLZ

    Hi,
    In SPRO>LE>WM>Strategies>Putaway strategies>Define strategy for Fixed Bin,
    While activating putaway strategy as "Fixed Bin" it is not possible to tick the check Box "Storage Chk. section active" & getting error as "If you have st.pl.str. "Fixed bin", the area check must not be active"
    But in Tcode OMLZ, i can able to activate this Storage section Chk.
    I want to understand why such difference & what is the impact if i activate it in OMLZ
    Regards,
    Baskar

    Hi,
    OMLZ is storage section search and the menu path is for putaway strategy, both are completely different.
    Error message, is you are giving a particular bin as fixed bin but the storage section search is active for that. When the storage section search is active, i beleive fixed bin indicator is not possible.
    Regards,
    Prabu

  • Storage Section determination

    hi ,
    In manual put-away strategy, the storage section determination is possible?....my client requirement is bin will be inputed by user remaining things like storage type and storage section have to determine by system...is it possible..i already maintained storage section search in OMLZ ..not triggered in TO.
    Thanks
    Muthuraman.D

    HI Muthuraman,
    you can activate the storage section determination in img path: Logistics Execution --> Warehouse Management -->
    Strategies --> Activate Storage Section Search -->  activate --> you have three options..
       No storage section determination or check
    X  Storage section determination and check
    Y  Storage section determination, no check
    same way you can activate the storage bin check for putaway stragegies.
    Kind regards,
    Ramana

  • Different storage section  get picks while TO creation

    Dear expert
    Different storage section ( not which has been assigned in strategy) get picks while TO creation
    Regards
    Karan

    Different storage section ( not which has been assigned in strategy) get picks while TO creation
    You probably didn't activate the section determination for the storage type. If don't activate this, he ignores your configured strategy.
    IMG: Logistics Execution -> Warehouse Management -> Strategies -> Activate Storage Section Search -> Activate, and then check the setting for your storage type.

  • Problem in the storage section of " about that mac "

    Hello everyone,
    I recently bought a new 2014 Mac book pro retina 13 inch and I'm really happy with it even if I think that OSX Yosemite have some bugs ( usually fluidity ) .
    But I have a problem in the storage section of  "about that mac", the problem is that it says everywhere that i have used 66 Go of the storage but in that section it says that I have 77 Go of applications ( more than 60 go more ). So I wanted to know if it was hiding a bigger problem or if it was a basic OS problem without any importance.
    I'm looking forward hearing from you !
    Thank You

       Re-index Macintosh HD.
       Spotlight reindexing will take a while to finish.
       System Preferences > Spotlight > Privacy
       http://support.apple.com/kb/ht2409
       You will see a new category  “Other” in the Storage Display.
       About “Other”:
       http://support.apple.com/en-us/HT202867
    Note:
      A new Mac comes with 90 days of free tech support from AppleCare.
      AppleCare: 1-800-275-2273

  • Error in storage section (LT09) - WM

    Hi to you all,
    We were using tc LT09 to transfer a storage unit from one
    position to another.
    When determening the destination storage bin, system does not
    recognize the correct destination storage section (we've
    check if the storage section is correct and everything is
    ok), the following error occurs: L3 038 - Putaway in storage
    section 001 is not allowed.
    The problem is that system does not recognize the storage
    section (322) and goes to the default one (001).
    If we try to do the exactly same movement in LT01 everything
    works out fine.
    Can you please help us with this problem?
    Thanks in advanced for your help.
    Best regards,
    Marisa S.

    charlie thanks for your answer, but i've already done that.
    Storage section is allowed. In storage bin search log i get this:
    Storage bin search attempt  1                               
    Required qty... 5,000 CRT                                   
    St.unit type... E1                                                                               
    Determ.of source data      Known:                           
                               Storage type... 000              
                               Storage bin.... 0000001247       
                               Quant number... 0000001247                                                                               
    Determ.destination data    Known:                           
                               Storage type... 001              
                               Storage area... 322              
                               Storage bin.... N-90-01          
                               Storage unit... 0000000312       
      System message L3  038                                    
        Putaway in storage section 001 is not allowed           
      Do you have any ideia how to solve this?
    Thanks.
    Best regards,
    Marisa S.

  • ID Point for Storage Type V.S. Value in Storage Type Search Table.

    I am trying to perform a GR without PO (MVT 501) for material ABC into Plant 1000, Warehouse number 100, Storage Location 0100.
    During creation of Transport Order, the Destinated Storage Type appeared
    is 011  (ID point for st.ty.010). However, the desired Destinated Storage Type should be 015 (High Rack) instead of 011.
    I have checked the following configuration:
    1. At the SPRO->LE->WM->Master Data->Define Storage Type, the value set for Field: Assigned ID (Identification point) for storage type under the Stock Placement Control = 011 (ID point for st.ty.010).
    2. At the Storage Type Search Strategy, 015 is put as the first Storage Type, followed by Storage Type 001 (high Rack Storage)
    3. And I found out that using LX03 (Bin Status Report) that there is no
    Storage Bin created for the combination of the following
    Plant 1000, WN 100, SLOC 0100, Storage Type 015, Storage Section 001
    Since we do not have any Storage Bin created for Storage Type 015, it will display 011 as the destinated storage type during TO creation.
    My question
    After I have manually created a Storage Bin 03-01-01 for storage type 015, during the TO Creation, system still suggests 011 as Destinated Storage Type instead of the 015 I put in the 1st column of the Storate Type Search.
    I already have the Storage Bin created for Storage Type 015, why the system still fails to pick it but suggests 011 from Assigned ID (Identification point) for storage type.

    Dear Karthik
    You are right, I did activated Indicator: Activate Storage Unit Type Check for Stock Placement in SPRO->LE->WM->Master Data->Define Storage Type
    The Indicator: Storage type with storage unit management was also ticked automatically by system when I selected Indicator: Activate Storaget Unit Type Check for Stock Placement.
    Are you trying to say the ID Port defined in Storage Type will have higher priority over the Storage Type value I maintained in the Storage Type Search Table?
    I have already maintained the Storage Bin and I still do not understand why system still go for ID port. As far as I know, system will suggest the Storage Type from ID Port ONLY if storage bin in this storage type as their destination are not maintained in first in the other setting.
    Quoted from SAP HELP
    Identification point for storage type
    Identification point (storage type) of the current storage type.
    All goods movements that do not have a specific storage bin in this storage type as their destination are first directed to the identification point.
    Here the goods are identified and a transfer order is generated for the actual transfer of the goods into the storage type concerned.
    Please help.
    Edited by: Daimos on Nov 4, 2011 3:25 AM

Maybe you are looking for