Problem packaging epubs - Invalid UUID

Hi All,
We have some epubs that will not package. There are various messages but the epubs seem valid when checked on epub validators.
error xmlns="http://ns.adobe.com/adept" data="E_PACK_ERROR http://<url>/packaging/Package Invalid UUID string: 9789525912173"
error xmlns="http://ns.adobe.com/adept" data="E_PACK_ERROR http://<url>/packaging/Package Invalid UUID string: 9789525912159"
error xmlns="http://ns.adobe.com/adept" data="E_PACK_ERROR http://<url>/packaging/Package Invalid UUID string: 9789525912128"
error xmlns="http://ns.adobe.com/adept" data="E_PACK_ERROR http://<url>/packaging/Package Invalid UUID string: 9789525912166"
etc
The string that ACS is complaining about is the ISBN of the book. This could possibly be coming from the file name which is <ISBN>.epub.
What does the Invalid UUID mean?
If we change from epub to pdf the file works fine which suggests its something to do with the epub.
Any help appreciated.

The package command is similar to the following:
Which as you can see doesn't contain a dc:identifier composite. Or do you mean there is an identifier within the epub file that I need to check?
Thanks

Similar Messages

Problems packaging epub file

Hello, i hava a problem when i am packaging a epub file. it pass epubcheck with " no errors"
When i try to package the file i put: java -Xmx1024M -jar uploadtest-1_2.jar [URL] file.epub -pass X -xml -jpg
I don´t know what it is happened...

I hope this isn't a silly question, but when I viewed the help for the "open/create/replace file" tool it said this for the file path:
"file path is the path name of the file. If file path is empty (default) or is (not a path), the VI displays a dialog box from which you can select a file. Error 43 occurs if you cancel the dialog box."
That is different from what your help says. The help I read for mine implies that the dialog box pops up only if you don't wire a path to it, leading me to think if you wire a path to the file name it will automatically use that file without bringing up a dialog box. It says nothing about the file path input being used only to specify the initial path for the dialog box - which is what your help says.
I'm using LabView 7.1, is there a difference in help dialogues between versions of LabView?
Amateur programmer for over 10 years!

Package owner - invalid packages

Hello guys,
I have this problem: I have two DB schemes A and B. I modified the code in both schemes. After compilation, many packages were invalidated. So I compiled all invalid packages, no compilation errors, everything ok.
Now if I run this query in scheme A:
SELECT *
FROM ALL_OBJECTS
WHERE OBJECT_TYPE IN ('PACKAGE', 'PACKAGE BODY')
AND STATUS = 'INVALID';I get two records.
The first one shows an invalid package where owner is scheme C - this is ok, because in scheme C is really such invalid package which has granted execute to scheme A.
The second one shows an invalid package body, where owner is scheme A. But in scheme A, there is no such package. The "invalid" package is in fact in scheme B, it is in fact not invalid and it has no grants at all. So scheme A has no access to that package at all.
Recompilation of this package in scheme B has no impact on the result. Why is the package marked as invalid and why is scheme A assigned as an owner???
Now I run exactly same query in scheme B and get one record.
One package is marked as invalid where owner is scheme B. However this package is in scheme A and scheme A is the owner of this package. Again the package is not invalid and recompilation of that package has no impact... In this case the package has granted execute to scheme B, so scheme B has the access to this package.
Can anyone help me with this?
Thanks, Dan

I found the problem...
After I did those changes to that packages, I first compiled the bodies to wrong schemes. So the bodies were created without specifications. I didn't see those packages because SQL Developer doesn't display them in such case...
So I droped them now.

Error message: Package contains invalid characters installing patchlevel 6

Dear experts:
I have successfullly installed SAP GUI 7.20 compilation 2, using SAP installation server (40 machines, Windows XP sp3 32 bits, latest updates).
I have successfully installed patchlevel 6 in the SAP installation server. (gui720_6-10007878.exe, downloaded from SAP Portal)
SAP GUI is configured to search for updates after 5 double-clicks on desktop icon. I forced the 5 double-clicks on a test machine and the patch begins to install; then informs me that there is a pending reboot.
When I reboot the machine a SAP Netweaver Front-end installer window appears with the error: "/Package contains invalid characters like /*?"<>\" - "Your system has a pending reboot". If I reboot again the message is displayed again.
If I click on the "Cancel" button of this window, Windows XP continues booting and SAP GUI works fine.
Two questions:
How can I avoid the installation of this patch on all the machines?
What can be wrong?
Thank you very much.
Mr.Clinker
Uruguay - South America.

1.) To avoid the installation on all clients simply go to "Services -> Configure Automatic Workstation Update Service" in the SAP Installation Server Administration Tool and disbale the service. If this doesnt work you can delete the package on the installation server an create a new one with the same name. You can than patch the package to the patchlevel you want.
2.) Try to apply patch 6 Hotfix 2 and see if the problem remains.

How to resolve a "The Extension Package is invalid."error message in Adobe Extension Manager CS5,6

How to resolve a "The Extension Package is invalid.error message in Adobe Extension Manager CS5,6

I'm using Windows XP Professional sp3.I've tried to install(unfortunately,to no effect,till now)Layers Control by Vadim Chtcherbakov ,Floating Adj by David Barranca,Photoshop Blending Modes by Rufus Deuchler,and The Fader by Capture Monkey.The Adobe Extension Managers I have installed in my PC are 5.0.1 for CS5,and 6.0.8 for CS6...Thanks in advance for your consultation!

I try to put the program in Adobe Extension and I have an error stating extension package is invalid

HELP!- This is the very first time I'm trying to download a plug in. I downloaded the Adobe Extension Manager CS6. I'm trying to install the plug in to that but I'm receiving an error stating the extension package is invalid. Any help would be wonderful! Thank you!

Hi Peter,
I cannot cut and paste , I tried it.
Just phoned my service provider, the operator I spoke with has the same phone as mine and she said that when I am entering the codes that when I get to the + sign I should just hold it down and it will change to the + sign, but mine doesnt. Mine gives me 3 choices, 1. add new contact 2. add existing contact, 3. cancel.
It doesnt matter how long I hold the + sign down for
Does anyone know of a solution please, its driving me mad lol
Thanks x

The extension package is invalid

The extension package is invalid. The extension will not be
installed.
When attempting to download and install extensions from the
Dreamweaver extensions listed at the Adobe Dreamweaver Extension
page I receive this message.
Any solution?
I am running Dreamweaver 8 on a PC. The OS is Vista. Don't
tell me Vista is at fault. It will occasionally install an
extension just fine. Most of the time it won't.

What extension? Have you checked the specs to see if your OS
is supported?
> I am running Dreamweaver 8 on a PC. The OS is Vista.
Don't tell me Vista
> is
> at fault. It will occasionally install an extension just
fine. Most of
> the
> time it won't.
>
Occasionally? I think you have your answer. Dreamweaver 8
came out a year
before Vista did. Many of the extensions on the Exchange may
not even
support 8 .. many of them do. Make sure 8 is supported in the
extensions
you are trying to install. As for Vista .. I don't have it so
it's hard for
me to comment. I have seen enough however that I'll probably
wait at least
a year and let them put out a better version before I take
that plunge.
JMO.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: DMX 2004: The Complete Reference, DMX 2004:
A Beginner''s
Guide, Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development

Problems downloading epub file to ipad 3

Having problems view epub book downloaded to iPad3. Followed instructions in users guide - any suggestions?
The book downloads, but I get an error message saying it is in a format not supported by ibooks.

You can use Documents To Go and QuickOffice Pro HD apps. When you open the email attachment you will have an option of where to open the attachment. Select the app you want.

FND_PROFILE package gets invalid

Hi,
FND_PROFILE package gets invalid, so i did like as follows:
SQL> alter PACKAGE FND_PROFILE compile body;
Warning: Package Body altered with compilation errors.
SQL> show error
Errors for PACKAGE BODY FND_PROFILE:
LINE/COL ERROR
99/26 PL/SQL: Item ignored
99/50 PLS-00382: expression is of wrong type
118/2 PL/SQL: Statement ignored
118/6 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
190/2 PL/SQL: Statement ignored
190/6 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
339/2 PL/SQL: Statement ignored
LINE/COL ERROR
339/6 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
398/3 PL/SQL: Statement ignored
398/7 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
402/3 PL/SQL: Statement ignored
402/7 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
LINE/COL ERROR
1835/2 PL/SQL: Statement ignored
1835/6 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
2009/2 PL/SQL: Statement ignored
2009/6 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
2375/2 PL/SQL: Statement ignored
2375/6 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
LINE/COL ERROR
2402/2 PL/SQL: Statement ignored
2402/6 PLS-00320: the declaration of the type of this expression is
incomplete or malformed
SQL>
So, could anybody suggest, what to do now and how to proceed to make this package valid ?

Nitesh,
So, could you help me to know the source where i can find the valuable information related to this.To find the pls for package creation, you can also do the following in your appl_top.
-> Go to the product top/patch/115/sql
-> grep -i fnd_securit * | grep -i create
You'll get an output something like this
AFSCGRPB.pls:create or replace package body FND_SECURITY_GROUPS_PKG as
AFSCGRPS.pls:create or replace package FND_SECURITY_GROUPS_PKG as
AFSCUSV8.pls:CREATE OR REPLACE PACKAGE BODY fnd_security_pkg wrapped
AFSCUSVS.pls:CREATE OR REPLACE PACKAGE fnd_security_pkg AUTHID DEFINER AS
afpub.sql:CREATE SYNONYM FND_SECURITY_PKG FOR &1..FND_SECURITY_PKG;
afsecctx.sql:REM | Creates the fnd_security context and invalidates any obsolete
afsecctx.sql: execute immediate 'create context fnd_security using fnd_security_pkg';
In these you would need the pls related to FND_SECURITY which are AFSCUSV8.pls and AFSCUSVS.pls
-> sqlplus apps/apps @AFSCUSVS.pls (Spec)
-> sqlplus apps/apps @AFSCUSV8.pls (Body)

Extension package is invalid. The extension will not be installed

Hi!
Extension package is invalid. The extension will not be installed.
This is the message i receive throughout CS (illustrator, photoshop, indesign) with all of the extensions I have downloaded. Working on PC / Win7
Thank You!

1. Create a file named "ExManLog.YES" in Extension Manager folder.
    Windows:
    1) Open command prompt as administrator;
    2) Change directory to "C:\Program File (x86)\Adobe\Adobe Extension Manager CS6"
    3) Run command
    echo > ExManLog.YES
    Mac:
    1) Open terminal;
    2) Change directory to"/Applications/Adobe Extension Manager CS6/Adobe Extension Manager CS6.app/Contents/MacOS";
    3) Run command
    sudo touch ExManLog.YES
2. Launch Extension Manager.
3. Extension Manager log files( *.log ) can be found in the following folder.
    Windows: "C:\Users\<UserName>\AppData\Roaming\Adobe\Extension Manager CS6\"
    Mac: "/Users/<UserName>/Library/Application Support/Adobe/Extension Manager CS6/"
4.send the log files and the extension to [email protected]

How to find the status of package (valid/invalid) was at a particular time

How to find the status of package (valid/invalid) was at a particular time ?
I want to find the status of one oracle package at 3pm yesterday. The status of this package today is INVALID.
I am sure it was VALID yesterday. But no way to prove it. Can any one help please???
I can generate AWR report for last 7 days...

Try using a flashback query, like this:
select object_name, object_type, status
from dba_objects AS OF TIMESTAMP (SYSTIMESTAMP - INTERVAL '18' HOUR) -- 18 hours ago
where object_name = 'MY_OBJECT'
;if you haven't granted FLASHBACK privs, you may need to connect as SYS to do a flashback query on a data dictionary table.
But this should give you the info you need - if it's still in undo.

Valid packages goes invalid when executing application

Friends of pl/sql
When we execute our application we find that 2 of our main packiages go invalid for no reason. The packages compiles just fine when we then compile them. So, no syntax errors. But it stops our application with a lovely "existing state of packages have been discarded......." type error. Not too nice.
What are some of the things to check on for why the package goes invalid ?
We are using TOAD and sql*monitor to trace the process at the moment...........
Any solutions out there ?
Environment : Oracle Enterprise Linux 5 on Oracle 11.1.0.6 (latest patch available). Oracle 11 client as well.
Edited by: ow001294 on Apr 15, 2009 9:24 AM

One of my older standard responses (haven't use this in a while)..
Packages tend to fail because of their "package state". A package has a "state" when it contains package level variables/constants etc. and the package is called. Upon first calling the package, the "state" is created in memory to hold the values of those variables etc. If an object that the package depends upon e.g. a table is altered in some way e.g. dropped and recreated, then because of the database dependencies, the package takes on an INVALID status. When you next make a call to the package, Oracle looks at the status and sees that it is invalid, then determines that the package has a "state". Because something has altered that the package depended upon, the state is taken as being out of date and is discarded, thus causing the "Package state has been discarded" error message.
If a package does not have package level variables etc. i.e. the "state" then, taking the same example above, the package takes on an INVALID status, but when you next make a call to the package, Oracle sees it as Invalid, but knows that there is no "state" attached to it, and so is able to recompile the package automatically and then carry on execution without causing any error messages. The only exception here is if the thing that the package was dependant on has changes in such a way that the package cannot compile, in which case you'll get an Invalid package type of error.
And if you want to know how to prevent discarded package states....
Move all constants and variables into a stand-alone package spec and reference those from your initial package. Thus when the status of your original package is invlidated for whatever reason, it has no package state and can be recompiled automatically, however the package containing the vars/const will not become invalidated as it has no dependencies, so the state that is in memory for that package will remain and can continue to be used.
As for having package level cursors, you'll need to make these local to the procedures/functions using them as you won't be able to reference cursors across packages like that (not sure about using REF CURSORS though.... there's one for me to investigate!)
This first example shows the package state being invalided by the addition of a new column on the table, and causing it to give a "Package state discarded" error...
SQL> set serveroutput on
SQL>
SQL> create table dependonme (x number)
2 /
Table created.
SQL>
SQL> insert into dependonme values (5)
2 /
1 row created.
SQL>
SQL> create or replace package mypkg is
2    procedure myproc;
3 end mypkg;
4 /
Package created.
SQL>
SQL> create or replace package body mypkg is
2    v_statevar number := 5; -- this means my package has a state
3
4    procedure myproc is
5      myval number;
6    begin
7      select x
8      into myval
9      from dependonme;
10
11      myval := myval * v_statevar;
12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
13    end;
14 end mypkg;
15 /
Package body created.
SQL>
SQL> exec mypkg.myproc
My Result is: 25
PL/SQL procedure successfully completed.
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        VALID
SQL>
SQL>
SQL> alter table dependonme add (y number)
2 /
Table altered.
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        INVALID
SQL>
SQL> exec mypkg.myproc
BEGIN mypkg.myproc; END;
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package body "SCOTT.MYPKG" has been invalidated
ORA-06508: PL/SQL: could not find program unit being called: "SCOTT.MYPKG"
ORA-06512: at line 1
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        INVALID
SQL>
SQL> exec mypkg.myproc
PL/SQL procedure successfully completed.
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        VALIDAnd this next example shows how having the package variables in their own package spec, allows the package to automatically recompile when it is called even though it became invalidated by the action of adding a column to the table.
SQL> drop table dependonme
2 /
Table dropped.
SQL>
SQL> drop package mypkg
2 /
Package dropped.
SQL>
SQL> set serveroutput on
SQL>
SQL> create table dependonme (x number)
2 /
Table created.
SQL>
SQL> insert into dependonme values (5)
2 /
1 row created.
SQL>
SQL> create or replace package mypkg is
2    procedure myproc;
3 end mypkg;
4 /
Package created.
SQL>
SQL> create or replace package mypkg_state is
2    v_statevar number := 5; -- package state in seperate package spec
3 end mypkg_state;
4 /
Package created.
SQL>
SQL> create or replace package body mypkg is
2    -- this package has no state area
3
4    procedure myproc is
5      myval number;
6    begin
7      select x
8      into myval
9      from dependonme;
10
11      myval := myval * mypkg_state.v_statevar; -- note: references the mypkg_state package
12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
13    end;
14 end mypkg;
15 /
Package body created.
SQL>
SQL> exec mypkg.myproc
My Result is: 25
PL/SQL procedure successfully completed.
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        VALID
SQL>
SQL> alter table dependonme add (y number)
2 /
Table altered.
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        INVALID
SQL>
SQL> exec mypkg.myproc
My Result is: 25
PL/SQL procedure successfully completed.

DBMS_JOB using Packaged Functions but Package goes invalid

Is there any way to check a package while running a PL/SQL procedure to see if it's state is valid and then catch the exception?
In my case usually just calling any function in the package 1x clears it up but the procedure in question runs as a DBMS_JOB it just keeps failing. This procedure could run often enough that Oracle will mark it as broken but I want to give it every shot at execution on time instead of having to make it wait till the next cycle.
What I would like to do is to catch the exception for the package state being invalid and basically have it go back to the beginning of the procedure and give it another try before failing in case it is just a failure because the package has been altered.
Is there any way to do this?

Firstly, I'll copy/paste my standard response regarding package state going invalid as it usually helps to have an understanding of these things...
Packages tend to fail because of their "package state". A package has a "state" when it contains package level variables/constants etc. and the package is called. Upon first calling the package, the "state" is created in memory to hold the values of those variables etc. If an object that the package depends upon e.g. a table is altered in some way e.g. dropped and recreated, then because of the database dependencies, the package takes on an INVALID status. When you next make a call to the package, Oracle looks at the status and sees that it is invalid, then determines that the package has a "state". Because something has altered that the package depended upon, the state is taken as being out of date and is discarded, thus causing the "Package state has been discarded" error message.
If a package does not have package level variables etc. i.e. the "state" then, taking the same example above, the package takes on an INVALID status, but when you next make a call to the package, Oracle sees it as Invalid, but knows that there is no "state" attached to it, and so is able to recompile the package automatically and then carry on execution without causing any error messages. The only exception here is if the thing that the package was dependant on has changes in such a way that the package cannot compile, in which case you'll get an Invalid package type of error.
And if you want to know how to prevent discarded package states....
Move all constants and variables into a stand-alone package spec and reference those from your initial package. Thus when the status of your original package is invlidated for whatever reason, it has no package state and can be recompiled automatically, however the package containing the vars/const will not become invalidated as it has no dependencies, so the state that is in memory for that package will remain and can continue to be used.
As for having package level cursors, you'll need to make these local to the procedures/functions using them as you won't be able to reference cursors across packages like that (not sure about using REF CURSORS though.... there's one for me to investigate!)
This first example shows the package state being invalided by the addition of a new column on the table, and causing it to give a "Package state discarded" error...
SQL> set serveroutput on
SQL>
SQL> create table dependonme (x number)
2 /
Table created.
SQL>
SQL> insert into dependonme values (5)
2 /
1 row created.
SQL>
SQL> create or replace package mypkg is
2    procedure myproc;
3 end mypkg;
4 /
Package created.
SQL>
SQL> create or replace package body mypkg is
2    v_statevar number := 5; -- this means my package has a state
3
4    procedure myproc is
5      myval number;
6    begin
7      select x
8      into myval
9      from dependonme;
10
11      myval := myval * v_statevar;
12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
13    end;
14 end mypkg;
15 /
Package body created.
SQL>
SQL> exec mypkg.myproc
My Result is: 25
PL/SQL procedure successfully completed.
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        VALID
SQL>
SQL>
SQL> alter table dependonme add (y number)
2 /
Table altered.
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        INVALID
SQL>
SQL> exec mypkg.myproc
BEGIN mypkg.myproc; END;
ERROR at line 1:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package body "SCOTT.MYPKG" has been invalidated
ORA-06508: PL/SQL: could not find program unit being called: "SCOTT.MYPKG"
ORA-06512: at line 1
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        INVALID
SQL>
SQL> exec mypkg.myproc
PL/SQL procedure successfully completed.
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        VALIDAnd this next example shows how having the package variables in their own package spec, allows the package to automatically recompile when it is called even though it became invalidated by the action of adding a column to the table.
SQL> drop table dependonme
2 /
Table dropped.
SQL>
SQL> drop package mypkg
2 /
Package dropped.
SQL>
SQL> set serveroutput on
SQL>
SQL> create table dependonme (x number)
2 /
Table created.
SQL>
SQL> insert into dependonme values (5)
2 /
1 row created.
SQL>
SQL> create or replace package mypkg is
2    procedure myproc;
3 end mypkg;
4 /
Package created.
SQL>
SQL> create or replace package mypkg_state is
2    v_statevar number := 5; -- package state in seperate package spec
3 end mypkg_state;
4 /
Package created.
SQL>
SQL> create or replace package body mypkg is
2    -- this package has no state area
3
4    procedure myproc is
5      myval number;
6    begin
7      select x
8      into myval
9      from dependonme;
10
11      myval := myval * mypkg_state.v_statevar; -- note: references the mypkg_state package
12      DBMS_OUTPUT.PUT_LINE('My Result is: '||myval);
13    end;
14 end mypkg;
15 /
Package body created.
SQL>
SQL> exec mypkg.myproc
My Result is: 25
PL/SQL procedure successfully completed.
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        VALID
SQL>
SQL> alter table dependonme add (y number)
2 /
Table altered.
SQL>
SQL> select object_name, object_type, status from user_objects where object_name = 'MYPKG'
2 /
OBJECT_NAME
OBJECT_TYPE         STATUS
MYPKG
PACKAGE             VALID
MYPKG
PACKAGE BODY        INVALID
SQL>
SQL> exec mypkg.myproc
My Result is: 25
PL/SQL procedure successfully completed.---------------------------------------------------------------------------------------------
Secondly, from this above standard response, you can see how to check for package state if you want to determine it programatically.
;)

Having problem downloading epub books onto mobile device (ipad & iphone) due to adobe server issue

having problem downloading epub books onto mobile device (ipad & iphone) due to adobe server issue, please advise

Hi Gautham
Reference to your question, I'm not using Adobe Digital Edition to download and sync to my iPad.
I am trying to download the epub book to my Overdrive app (which is authorize to download epub books) on my iPad to read.
Reply from Overdrive mentioned that this is Adobe server issue.
Any advise anyone??

Problem installing exchange add-ons... reports "extension package is invalid. The extension will not be installed."

I have downloaded some extensions, for DW CS5, t be installed via Exchange Manager. They are downloaded as Adobe zip files with the *.zxp extension but, everytime I try and install one I get the above error dialog. Any ideas anyone please?
Thanks

Hi Bob.
For "Free PHP Gallery" that is developed by me ...
If Adobe gave you the extension as a .zip file, then you can unpack this (separately from Dreamweaver) and put the files in a folder of your site, upload the files on your serer with Dreamweaver and access the gallery folder (index page). e.g: www.example.com/gallery/
For the Free PHP Gallery also look at the readme.txt file inside the zip file.

Problem packaging epubs - Invalid UUID

Similar Messages

Maybe you are looking for