Problem pairing iphone 5 with 2010 GMC

I can't get my iphone 5 to pair with my 2010 GMC Acadia. My iphone 4S paired perfectly fine. Any help/suggestions would be appreciated. Would updating to iOS 7 help?

Settings > General > Reset > Reset network settings and try it again.

Similar Messages

  • Problem after iOS5 with pairing iPhone with Car

    I have a Lexus is250 which paired beautifully with my iPhone and I was able to play music from phone in my car.  Since the upgrade, I cannot.  I have "repaired" "Blue tooth audio", the radio in car "looks" like it is playing (you can use the controls on the car stereo to forward through playlist and it forwards on phone" but no sound comes out.  This worked perfectly fine before iOS.  Any ideas?  I've deleted and re-paired phone twice....

    Same problem here with a 2011 Subaru Outback/Harman Kardon sound system. My iPhone 3GS used to work very well and auto-connect with the Harman Kardon system under iOS 4, but after upgrading to iOS 5 the iPhone looses connectivity each time I power the iPhone off and back on. It will keep connectivity as long as I do not do this. Turning the car off and back on works fine, connectivity re-establishes immediately. I even reset my iPhone and re-installed firmware and everything else - problem persists. SHAME ON APPLE FOR LOOSING CORE FUNCTIONALITY IN FAVOR OF BRINGING IN LOTS OF GIMMICS THAT ARE OF LITTLE OR NO USE IN EVERYDAY LIFE. SHAME ON APPLE ALSO FOR NOT PROPERLY BETA-TESTING THEIR SOFTWARE AND MAINTAINING BACKWARD-COMPATIBILITY IF THAT IS THE PROBLEM. We users should be entilted to monetary compensation from Apple whenever a software "upgrade" negatively affects a core functionality. Tim Cook, please correct some of the flawed corporate policies the belated Steve Jobs implemented. Apple still has a lot of room for improving! First of all, focus on optimizing core functionalities and their robustness before wasting time on changing icons or other cosmetic features.

  • Can't pair iphone with macbook (air)

    I haven't been able to pair my iphone 3GS with my macbook. I want to pair it via bluetooth to use an app that I purchased to control keynote.
    I have had this problem with a macbook and macbook air.  Two weeks ago my main computer was an older black macbook and my iphone would not pair with my macbook, I thought maybe because the macbook was just getting on; as my (bad) luck would have it I was foced to purchase a new computer, and purchased a macbook air and I am just finding that it still doesn't work.
    When I go to pair it, I can get to the point where I accept the pair but then when I click on pair from the iphone, it says my macbook is not supported.
    I have searched these forums and have not found an answer that works for me. Thanks in advance for any help that you can give.

    This is a problem with the bluetooth and the macbook air.  I mentioned the reason behind my need to pair - as it is not to share music, internet, etc. which I understand may be an issue.  I cannot find how to get support from the app maker, which is apple from my understanding. This app, keynote, only controls the keynote app on my mac. I haven't had any problem pairing the iphone and keynote but I need to control my keynote using bluetooth, as I have no garuntee that I will always be in a place with wifi or be able to access the wifi.

  • HT201205 can't pair IPhone with SYNC in Ford

    Have tried numerous times to pair IPhone 5 to SYNC system in two Ford vehicles.   Help?

    This is a problem with the bluetooth and the macbook air.  I mentioned the reason behind my need to pair - as it is not to share music, internet, etc. which I understand may be an issue.  I cannot find how to get support from the app maker, which is apple from my understanding. This app, keynote, only controls the keynote app on my mac. I haven't had any problem pairing the iphone and keynote but I need to control my keynote using bluetooth, as I have no garuntee that I will always be in a place with wifi or be able to access the wifi.

  • Pairing Iphone with Lexus

    I previously had a 3G Iphone which paired brilliantly with my bluetooth system in my 4 year old car. However, the new 3GS Iphone does not pair at all, the Iphone can not find any devices. I'm guessing this maybe to do with the 3GS software being version 2.1 as opposed to 2.0 and is now not compatible with my LX-350 Lexus. If this is the case, is it possible to download the older version? or is there another way around this problem?

    I had this same problem a couple of times with previous versions of the frimware on my Acura TL.... Here's what worked for me when I upgraded to the 3gs... Do a hard reset on your phone (hold the sleep/wake button and home button simultaneously for about 10 seconds or so) the phone will shut down... Release the two buttons and turn your phone back on... Try the pairing process now, it should have fixed the problem... If that doesn't fix the problem then do a restore in iTunes... The restore method worked for me back in the 2.0 firmware days.... Good luck

  • Pairing iPhone with a 2006 Audi Q7

    Anyone had any success pairing an iPhone with a 2006 Audi Q7. It initially seemed to pair with ease. Now it is less frequently creating a Bluetooth connection with the car. The phone is saying that it is successfully paired with the car. Any suggestions

    Your iPhone is probably still running 1.1.3. If you upgrade to 1.1.4, your iPhone will be able to pair up with the GPS perfectly. I have two Garmin Nuvi 680s and my iPhones pair up with them with 1.1.4 with no problems.

  • Problems Using iPhone with Audi Bluetooth Kit

    I have several problems using the iPhone with the factory-installed bluetooth car kit that came with my '08 Audi A4.
    (1) I can not download my contacts from the iPhone to the car's built-in phone book. Thus, I can't see the names of incoming callers, as there is no way to enter text into the car's phone book.
    (2) I can not answer calls, or end calls, by pushing the correct button the on the steering wheel. So, after I initiate a call and finish the conversation, pushing the disconnect button has no effect. I have to push "end call" directly on the iPhone. When a call comes in, I can't answer by pushing the correct button on the wheel. I must answer call directly on the iPhone.
    Anyone else having these problems? Any suggestions for fixing this?

    firstly, we have an brand new A4, Audi have said they can pair some 3G phones and not pair some.
    Apple have refused to acknowledge the problem, but have now said their is a new update out this month which should address any problems.
    This would make sense as our friendly guy at audi said to me, the 3G phones he has paired and uploaded phone books for customers, he couldn't tell what version of the iphone3g they had, so if it was an earlier version it would pair, and the later versions won't.
    also, there is now a 3G cable for the ipod connection via MMi, which works perfectly !
    so while we can't get address books for now, it will come.
    the other work around is, take an old nokia/ecricsson phone, sync it to your mac and upload your contacts, then pair to audi, hey presto you have your mac contacts on the audi.

  • HT2693 how to pair iphone with apple tv without remote for apple tv

    i lost apple tv remote.  trying to use i phone as a remote but without the remote to do setup on apple tv, i cant pair up the iphone with apple tv.  please help.

    If both items are enabled for Home Sharing and on the same network and it won't work yopu're going to need another remote.
    AC

  • Problem Syncing iPhone with iMac

    Hello,
    My iPhone has been working and syncing (with new iMac) just fine - until tonight. I plug in iPhone. It shows up in iTunes. I have Automatic sync checked. But, within less than a minute, I receive this error message:
    "iTunes could not sync contacts to the iPhone [name] because the iPhone disconnected"
    I also get same error message when I click "Sync" button in lower right of iTunes window. Obviously, I did not disconnect the phone as the error message alleges.
    I have rebooted computer. I have recycled iPhone (top right switch off, then on). I have changed iPhone cord plugged in back of iMac screen. I have ejected iPhone, removed plug and reestablished connection.
    I need to sync my contacts from iMac Address Book. Can someone please identify the problem and solution?
    Thank you,
    Dale
    Note: The iPhone was updated several days ago to 1.1.3. Syncs have taken place successfully SINCE the upgrade prior to tonight.

    With your iPhone connected and available with iTunes, under the Info tab for your iPhone sync preferences under replace information on this phone, select Contacts and then sync. This will replace all contact information on your iPhone with what is available in the Address Book application.

  • Had to reinstall windows 7 - Problems syncing iPhone with new iTunes

    Hello everyone!
    I've recently had to reinstall windows 7. Now I am having issues syncing my iPhone 4 with my new iTunes. I've look online at several forums and webpages but haven't found a workable solution yet.
    My issues are that when I attempt to sync my iPhone with the new iTunes, it tells me that it will erase everything on the phone and replace it with what's in iTunes. Well there's nothing in iTunes so this is a problem.
    Now I don't purchase anything through iTunes, except for a few apps, and the only thing I really want out of syncing is to get some class recordings, done by Voice Memos, from my iPhone to my computer. The files are all around ~30 Mb so I can't email them.
    Is there anyway to do this?
    Thanks,
    Greg

    What gets erased is the iTunes/App store purchases on your phone, replaced with the contents of your iTunes library on your computer - in this case nothing.  Voice memos sync only from phone to computer - they don't get deleted.
    To avoid losing your apps, music/media:
    1. Defeat automatic syncing on connection to iTunes:  ITunes preferences > Devices > Prevent .... from syncing automatically
    2. Connect phone to computer with iTunes open
    3. ITunes menu > File > Devices > Transfer Purchases
    4. iTunes menu > File > Devices > Back UP
    Now OK to sync voice memos to iTunes.

  • Pair iphone with GPS receiver?

    Is it possible to get an A2DP dongle for the iphone and then pair it with a bluetooth GPS receiver, thereby using the iPhone as a GPS? I don't want to buy all this junk if it's impossible. Thanks for any info!

    cyneller wrote:
    Is it possible to get an A2DP dongle for the iphone and then pair it with a bluetooth GPS receiver, thereby using the iPhone as a GPS? I don't want to buy all this junk if it's impossible. Thanks for any info!
    No. Bluetooth only works for Audio.

  • Cannot pair iPhone with iMac

    I have an iPhone 5c, iOS 8.1, and an iMac running Mavericks.  I am trying to pair my iPhone with the iMac (via Bluetooth) and it will not let me do so. I just finished reading a post from 2008, stating that it was not possible.  Is this true???  I could pair my old flip phone (non-Apple) to it without difficulty.  Hard to believe I cannot pair 2 Apple products together.
    Thanks,
    Glen

    iOS devices don't natively support file transfer over BT.
    You can use Photo Stream to access all of your pictures from all of your devices.
    My Photo Stream FAQ
    Depending on which model iMac you have, you may be able to use Airdrop.
    Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices
    I'd also take a look in the App Stores (Mac and iOS) for apps that will let you transfer pictures between the two devices wirelessly.

  • Pairing iPhone with Jawbone

    Can someone come back with a walk through over how to pair the iPhone with a Jawbone?
    Mine won't. I keep thinking I am doing something out of sequence. But, no combination is working for me.
    B

    Follow the instructions on page 9 of the Jawbone manual. On the iPhone bluetooth page under "Devices" you will see "Jawbone - Not Paired". Tap there to bring up the passkey page. Enter "0000" and press connect at the top right of the page.

  • Pairing iPhone with Plantronics Voyager 520

    I cannot pair my iPhone with a new Voyager 520 headset. I was able to pair the last one (which died, so I had to buy a new one ....)

    Without turning the headset on, turn the bluetooth on for the phone. Select the headset that is paired, and select Unpair. Then turn bluetooth off. Put the headset into the "discover" mode, by holding down the power button until the light flashes red and blue. Then turn the bluetooth on for the phone, and it should "discover" it. It should ask for the passcode, normally 0000. Once you enter that, it should pair. After that, you should be alright. You can turn the headset off and back on again and it should connect right away.
    Hope this helps.

  • Problem synchronizing iPhone with iPhoto

    Sometimes when I synchronize the iPhone with iPhoto, it takes too long and some photos don't get synchronized it says that the file is unreadable and on iPhoto it appears all corrupted.

    Did you already try to reset the photo cache?
    iTunes: Understanding the iPod Photo Cache folder
    Did you try to use another USB cable?

Maybe you are looking for

  • What is the best method to block out signatures?

    Hi Hopefully someone has some ideas on this. Basically my company needs to block out signatures and private information like telephone numbers in PDF documents which we publish on the web. We have been using the rectangle tool and 'lock' button to bl

  • Leasing problem with Apple Financial

    I know this isn't the right forum to post this, but I didn't see any "general" discussion forum. We have a leasing problem and the representative we've been working with is no longer returning my calls. I was hoping that someone here knew the contact

  • Why do i get vertical streaks on the page when i print with my laserjet 1536?

    i have hp paper, replaced the cartridge, replaced the printer, cleaned the paper path, and still have the problem

  • Movie flickers after rendering

    Hey fellows, after rendering my graded clips flicker in all formats even as animation sequenz. It seem's that every half-frame is replaced by black frame. Where in the settings or output-settings could I combine the half-frames? Any idea? Thanks ralf

  • C-Series Module NI 9871, 4-Port, RS485/422 Serial Interface

    I have a question regarding the C-Series Module NI 9871, 4-Port, RS485/422 Serial Interface. I need to find out how it recovers the data from the link. I need to compare it with 8b/10b encoding. Does anyone know what UARTs are used or how the data is