Problem: PC SUITE 7.0

the "tranfer music" application has some problem with the conversion in .M4A format.
after converting in .M4A format, when i tranfer the songs into my phone Nokia E51, they dont work.(dont play)
it used to work successfully previously with PC SUITE 6.85.
infact I still have over 100 songs in .m4a format in my phone that have no problem.

Hi ankush77,
If checked for requirements in the help file of Nokia Video Manager which has info as follows :
To be able to use Nokia Video Manager, make sure that you have Nokia PC Suite version 6.83 or newer installed on your PC. For system requirements, refer to Nokia PC Suite Help.
For video playback and conversion, make sure that you have the necessary codecs installed on your PC:
MPEG-2
DivX
xVid
QuickTime
So may be Quicktime could help is audio playback and conversion also that why i asked if you have installed Quick time on your PC ???

Similar Messages

  • Instalation problems Creative suite 5.5

    I have problems installing Creative Suite Standard 5.5 on my brand new computer with Win 7 home premium.
    Hints about restarting or removing file from Registry don't work as there is no such file (inProgress key).
    What else could I do?

    What is the exact error message you are receiving when you try to install?  Have you tried running the Adobe Support Advisor - http://www.adobe.com/support/loganalyzer/ to automatically review your installation logs?  Alternately you can follow the steps listed in Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html to manually review your installation logs.

  • Connection problems PC Suite - Nokia 6630

    Hi,
    I cannot get connected via Bluethooth to my Nokia 6630.
    My configuration is:
    Nokia 6630
    Widows XP Home Edition Version 5.1 (Build 2600.xpsp_sp2_gdr.050301-1519 : Serivice Pack 2)
    PC Suite 6.80.22
    Bluethooth USB Adaptor Belkin F87001 ver.2.11
    When I check on Nokia PC Suite Help 'about Nokia PC Suite' System info it says:
    Microsoft Windos 2000
    Build 2195
    No service pack installed
    and it also says:
    No supported Bluetooth stack found
    I have no problems using the Bluetooth USB adaptor for other applications.
    The problem with Nokia PC Suite is:
    After installing PC suite, I click on 'get connected' button and get the message:
    'there is no available connection type and therefore the connection to phone cannot be established. The wizard will exit.' If I then press OK I get the message: 'failed to detect available connection. Please reinstall Nokia PC Suite.'
    I have tried to reinstall PC Suite several times but always end up with the same messages.
    I have also run the PC Suite Cleaner 3.3 but still have the same messages.
    What should I do?
    Thanks,
    Andreas

    Hey,
    Dont worry, this is an issue alot of people have. I wrote a quick tutorial on how to do this.
    I understand that you have Service Pack 2 on your Windows XP am I Correct?
    If I am then procede with the tutorial:
    Connecting the Phone to a USB Bluetooth Dongle. Using PC Suite.
    Yesterday, I stayed up all night to figure this out. I called nokia support to see what they can do, and apparently the new drivers from Sitecom (the BT adaptor that I use) creates a "Cloak" over the Microsoft ones. (This is only if you have SP2!!)
    Required for these steps:
    ~PC Running Windows XP on Service Pack 2. (how do I know if I have Service pack 1/2? Go to Start > Controll Panel > Classic View (on the top left corner, or if you already are then ignore this) > System. In system it will say which serivce pack you are running.
    ~PC Suite version 6.80.22 or later.
    ~Bluetooth Adaptor + Drivers for it
    ~Nokia Phone supporting a bluetooth In/Out connection.
    ~Patience (this may take half an hour depending on your PC Spec) (Took me 15 minutes)
    So here is what I did:
    First of all close all programs that you dont need running.
    Start > Controll Panel > Add Remove Programs > Sitecom drivers
    Remove ALL Sitecom (or which ever company's you use).
    Reboot Computer.
    Next put the CD/Floopy in the PC or folder that you downloaded have ready on your desktop, containing the drivers required for your adaptor.
    If a autorun comes up cancel it.
    Plug in your bluetooth adaptor to a permanent usb port! The port you plug it into will be the only and only port that you can run bluetooth from, dont ask me why. So use a good safe place. (I put mine in the back of my PC, not the front.)
    Windows will now say that it has found new hardware. It will ask you if it can search the internet for drivers, click > Yes This Time Only.
    It will search and wont find anything.
    Now it will ask you if it can search for drivers on the PC, click : Yes, and tell it where the drivers are located, CD/Floppy, Folder. eg: E:\Sitecom/drivers/XP
    Let it install. It will finish, then suddenly re-open.
    Run the same step as above again. (dont ask me why..it just installes some more drivers.)
    Finally it will finish and say that your software is ready to be used.
    DONT TRY TO USE IT! THE SOFTWARE REQUIRED ISNT RUNNING YET. DONT RUN PC SUITE EITHER! DONT QUIT PC SUITE, AND DONT TRY TO USE THE CONNECTION MANAGER.
    REBOT the PC.
    Now when you go into PC Suite > Connection Manager, you should find a new connection. In my case:
    Bluetooth (Sitecom)
    and the old bluetooth connection looks like this:
    Bluetooth (Microsoft)
    The connection is very fast and stable. You can browse the phone as if it is cable connected which is awsome. Transfer speed depends on your adaptor, but it averages between 1 - 3 Megabites Per Second.
    Hopefully this works for you too!
    Good Luck,
    Tal
    I own a 5210, 5140 and now..the new 3250. Symbian 60 Series OS 3.0 ..just the best.

  • Problems cs6 suite adobe acrobat

    i have purchased adobe cs6 suite but acrobat x pro was not working so i was told to uninstall it but now i don't have it at all but would like to reinstall it.  How do i go about doing that

    Please follow the steps below to download Acrobat 10 Pro
    1. Navigate to Acrobat XI Downloads page : http://www.adobe.com/cfusion/tdrc/index.cfm?product=acrobat_pro&loc=us
    2. Sign in with your Adobe ID
    3. Copy and paste the following link on the address bar  and hit enter :
    Adobe Acrobat X Pro English Windows
    http://trials3.adobe.com/AdobeProducts/APRO/10/win32/AcrobatPro_10_Web _WWEFD.exe
    4. Save the file.
    5. Run the .exe file to start the installation.

  • Problema idioma Suite CS4

    Hola a todos.
    He adquirido un nuevo MacBook Pro, y me he instalado la Suite CS4, que ya tengo en el Mac Pro de trabajo habitual. Al hacer la instalación no me pidió en ningún momento el idioma del software, si el idioma de la instalación, seleccioné Español. Al iniciar cualquier software de la suite me aparecen en Inglés. Me pasó lo mismo con el Mac Pro, pero recuerdo que había una opción de selección del lenguaje del software, lo que no recuerdo donde.
    Alguien me puede indicar que debo hacer para modificar esto?
    Muchas gracias.

    I would defrag first. Also sometimes, heaven only knows why, it takes a while for they grayed out to come back to life. Just click on help like you did and if it is gray then just close out of help, then click back on help and it should not be gray. Sometimes it is just lazy and slow to respond to commands.

  • Ins_plsql (install problem) Dev Suite 9i on RH 8

    Hello,
    I am having trouble in installing Oracle Dev Suite 9i on RedHat 8. I am getting a make error for ins_plsql.mk.
    "Error invoking target of makefile - 'ins_plsql.mk'. Its a linker error I guess. Any ideas would be appreciated.
    Regards,
    Keith

    This is the "Binutils Issue". It can be solved by downgrading binutils or by the method below, which worked for me installing iDS902 on SuSE 8.1.
    I did hit another error after fixing this one with the ins_reports.mk and ins_forms.mk, but everything else works works. Evidently these issues have to do with /usr/X11R6/lib/libXm.so.2.1 missing, which comes from the openmotif package.
    An essential document for Oracle9i on Linux is
    http://www.puschitz.com/OracleOnLinux.shtml
    The solution below is taken from that. There are some other solutions if this gives you trouble (it worked for me).
    Edit the file $ORACLE_HOME/bin/genclntsh and change the following line (people have sent me emails pointing out that this also works for Mandrake 8.1 and Mandrake 8.2):
    LD_SELF_CONTAINED="-z defs"
    to read:
    LD_SELF_CONTAINED=""
    Then run the script $ORACLE_HOME/bin/genclntsh as the user "oracle" and not as the user "root". Also make sure you have all the Oracle environments set! (I got so many emails because people were not doing this)
    $ su - oracle
    $ $ORACLE_HOME/bin/genclntsh
    Created /opt/oracle/product/9.0.1/lib/libclntst9.a
    $
    After that hit retry in the error popup. This always worked for me. (I was told that this also works for SuSE 8.0.)

  • Problem with Nokia Suite 3.2.100 / PC Suite back ?

    Hi
    I sync some S^3 Smartphones with some Pcs
    unfortunately I get a lot of doubles in contacts.
    I did not get it in the past with PC Suite.
    There were rumors the PC Suite comes back to solve the problems ovi suite brought.
    Somebody know more?
    Still miss the stable syncing and the the Calendar of PC Suite.

    Solved. I updated the driver for the bluetooth stack. The driver was not found on the computer manufacturer's site. I had to hunt it down on the Internet. The drivers themselves are WHQL/Win7 certified.
    Present: Lumia-820
    Past: E6, L-800, N8, N900, 5800 XM, 6500 Slider, 6303c

  • Problems installing Adobe Prod Premium 6 on new laptop

    I uninstalled Adobe Production Premium 6 off of my old laptop and attempted to install it on my new Asus Windows 8 laptop. Once it asks for Disc 2 (there are 3 discs total), I press Continue, and it will look like it resumes installation, but then asks me to insert disc 2 again shortly after. I've restarted the computer and reattempted installation twice, but it still gets stuck at the same spot. Help!!! I have projects to edit asap!!

    http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-problems-creative-suite -6.html

  • Once 7610 the pc pairs with it, pc suite couldnt s...

    hi there,
    i've been searching through out the forum and there's no one having this problem.
    pc suite 6.82.22
    nokia 7610
    windows pro xp service pack 2
    ziga (brand) bluetooth, it works previously. so i don think it has a problem with the bluetooth device.
    here's my problem,
    after i changed my phone's name to a new one(connect > bluetooth). and it started to have problems.
    tried reinstall pc suite several times and still doesn't work.
    So started with get connected button on the pc suite, it found my phone, and i connect it. so the passkey windows pops out. and i key the same on my phone, once i tap DONE on phone. phones just nothing happens. but pc detects my phone, installed and not in the control panel it found my phone. But in the PC suite there's nothing happens. that passkey window doesn't let me click next. i clicked cancel and do a new search. now it doesnt detects my phone. once i remove the phone from the control panel. PC suites found my phone. but having the same problem. once i keyed my code on my phone, i just couldnt click next on the PC suite passkey window. cancle, and do a new search..phone not found.
    previously it works before i change my phone's name. i dont understand why it doesn't work now. previously it was the same Version of PC suite. Any Help? thanks alot, and appriciate it.

    Hi,
    Try this:
    1. Go to Windows' Control Panel and open "Add or Remove Programs" application.
    2. Select "PC Connectivity Solution", click "Change" and then "Repair".
    3. After Repair, restart PC.
    If not, then try this:
    1. Unpair you phone via BT stack.
    2. Remove you paired PC-information also via phone BT-UI
    3. Restart PC.
    4. Run GCW and pair your phone -> if it is not go to end (wait e.g. 2 minutes), press cancel and restart PC. After that start e.g. Nokia PC Sync application > Select Phone > Refresh.
    Does this help?

  • Suite Color Management is not enabled in PS CS5.

    Hi everybody,
    Here I am getting a problem that Suite Color Management is not enabled in PS CS5, I want to give you the details of my operating System: My OS contains XP-SP2, and my system is having very less RAM too and here my Photoshop Application is not a full suite.Is it compulsory that Photoshop should have complete suite. So my question is how to enable Color management in Bridge. And I am a home learner.So please help me out from this issue.If you want any more details please send mail.Then Surely I will give

    You asked this yesterday and received a full answer. I'm not going to type it again.
    https://forums.adobe.com/thread/1494939

  • Recup fichier archive suite crash PC: le fichier n'est pas un fichier ressource

    Bonjour à tous,
    Je suis à la recherche d'une aide precise pour mon probleme.
    Suite à un crash de mon PC, j'ai du recuperer ma programmation sous labview dans une sauvegarde.
    Malgré avoir désactivé l'option archive des fichiers VI, je ne peux les ouvrir avec Labview: "le fichier n'est pas un fichier ressource".
    Auriez vous une astuce pour contourner cela?
    Si oui, quelle est la procedure?
    cela m'est necessaire pour mes autres VI.
    Ci joint un VI.
    Dans l'attente,
    Cdlt
    Olivier
    Attachments:
    Pilote HTMS.vi ‏171 KB

    Bonjour,
    Tu es sur la partie internationale du forum, tu auras donc plus de chance d'avoir une réponse si tu postes en anglais.
    Il existe un forum francophone si tu le souhaites:
    French Forum
    Concernant ton message d'erreur, tu trouveras des infos dans le lien suivant:
    Why do I receive the error "LabVIEW Error File is Not A Resource: The File is Not A Valid LabVIEW Fi...
    Bonne journée,
    Valentin
    Certified TestStand Architect
    Certified LabVIEW Developer
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Travaux Pratiques d'initiation à LabVIEW et à la mesure
    Du 2 au 23 octobre, partout en France

  • 6021+PC Suite 6.83+Infrared = "no phones connected...

    Used this 6021 before with PC Suite 6 on previous W2K SP4 laptop. Installed latest version of PC Suite on this new Dell Latitude D620 laptop running W2K SP4.
    Problem: PC Suite won't connect to 6021 via Infrared (I don't have cable or bluetooth available) - "no phones connected". Get Connected wizard fails to connect and displays the Troubleshoot page. Wireless Link sees the 6021 and I can use Wireless Link to send a file to the phone ok. Wireless Link will also send/receive files between this laptop and other laptops ok. Why can't PC Suite connect?
    I've uninstalled and reinstalled PC Suite lots of times, reinstalled Infrared driver.
    Please help!
    System Info
    Phone 6021
    Dell Latitude D620
    Operating system:
    Microsoft Windows 2000
    Build 2195
    Service Pack 4
    Language: English
    Language for non-Unicode programs: English
    Locale: English
    Input language: English
    Nokia PC Suite:
    Version 6.83.14.1
    Language: English
    Connectivity Cable Drivers:
    Version 6.83.9.0
    PC Connectivity Solution:
    Version 7.7.10.0
    Microsoft Outlook:
    Version 11.0
    Build 8118
    No supported Bluetooth stack found

    Topics seem to either get resolved early or fizzle out with no resolution so here's my findings if anyone's interested...
    I had PC Suite 6.? working fine with my Nokia 6021 using infra-red but my PC was changed. The change was done by applying my existing profile on a clean cloned Win 2000 system. This needed PC Suite to be reinstalled but there was probably old stuff in my profile which got in the way.
    I tried many versions of PC Suite, borrowed phones and cables etc - wasted lots of time getting no-where!
    Today, I got my PC rebuilt again. We took steps to clean up my profile before I started plugging in any cables or installing PC Suite. When we were ready we did this:-
    1. inserted CD with PC Suite on it - it happened to be version 6.80.22 and go as far as connectivity setup (but not PC Suite itself)
    2. plugged in CA-42 cable to USB port and my phone and waited for it to search for hardware. Make sure it picks the right driver. My phone came up with "enhancement not supported" but after unplugging and replugging the phone it seemed to find it!
    3. Carry on with the rest of the PC Suite install.
    I also enabled infrared and that works too now!
    Cheers
    David

  • Will Design Suite CS3 run ok on this computer?

    I need a new computer and on a low budget. I have Create Suite CS3 and wanted to know if this PC has an ok spec to run it:
    http://www.argos.co.uk/static/Product/partNumber/5074392.htm
    Thanks!

    Toolman I am sorry but there is no computer statistics on the link you displayed.  You can find much of the Windows system requirements for Creative Suite 3 in Troubleshoot installation problems (Adobe Creative Suite 3.x on Windows Vista) - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-problems-creative-suite -6.html.

  • I stumped a Genius Bar guy on two iPhone points

    I recently went to the Soho Apple store and went over all my issues that I have with my iPhone. Most of them I have seen discussed over and over since the release (see my long list below). However here are two issues I have not seen discussed that are highly problematic. When I brought them up to a Genius Bar guy, he said I had found all the issues he knew of and didn't even know about these two:
    First, from your contacts, if you click on an address to look it up in Maps, if that adress contains a Fl.#, Flr.# Fl # Fl. # Floor # or anything like that, Maps cannot find the address. If you delete the Floor number out of your contact, Maps locates the address without issue. Living in NYC, I have a lot of addresses with floor numbers, so this is really annoying.
    Second, if you are on the phone, you cannot edit an existing contact, or create a new one. Why this is the case completely baffles me. Essentially, I have to write down someone's info if they give it to me over the phone and then add it after I've hung up.
    I hope apple takes note of these two biggies and also...my long list of issues:
    No copy and paste
    USB recognition in iTunes is buggy, though better since updates
    Cannot txt to mutliple addresses or forward txts
    No picture texting
    Freezes and crashes of all kinds, though better since updates
    No search feature for address book; Spotlight please??
    Email doesn't flip sideways like Safari
    General volume is too low for phone, external speakers, ringer and alerts
    Calender is not color coded for categories
    No Flash
    All that said, I love my iPhone. I just hope Apple goes the distance in raising it from a B+ to and A+ device.
    Note: I recently went to Scotland for a week. I texted quite a bit, made a few phone calls here and there and had $24 in additional charges on my bill. Not too bad. Just be sure to keep airplane mode on whenever you can, don't use Safari or any web based widgets and you shouldn't ring up a big bill overseas.

    if that adress contains a Fl.#, Flr.# Fl # Fl. # Floor # or anything like that, Maps cannot find the address.
    Google Maps used to have the same problem with Suite, St, #, etc, didn't it? Those seem okay now.
    For fun, I just tried your "Flr#" variations using Google Maps for Windows Mobile (which is almost the same as iPhone but without animated pushpins). That version also fails to find the address... unless it's spelled out explicitly as "Floor", which works.
    So it appears to be a Google problem. We should try the direct Google web service to confirm.
    PS. So I started thinking. Hey, Google has a big office in New York. They even work on Maps there:
    http://www.google.com/support/jobs/bin/static.py?page=why-ny-ny.html
    So don't they ever look up themselves? Wouldn't they figure out that "Flr" was a problem? Haha, no. Because their address is listed as:
    76 Ninth Avenue
    4th Floor
    New York, NY 10011
    With "Floor" spelled out. Which works

  • Major issues with keypress being necessary

    We are outsourcing development of an application (image
    viewer) in FL2.0 and have come up against a big brick wall.
    The viewer is supposed to download an image when first run,
    however it will not. After debugging in ADC these two errors are
    shown: FTPA016/FTPA017
    Can
    be seen here->
    It seems that (perhaps only in Japan which is our target
    audience) data cannot be downloaded unless there is a keypress from
    the user. I guess this is to prevent movies from running up user
    bills without them knowing about it. The thing is we have put in a
    fix so that the user needs to press # twice and they should be able
    to see the image. However nothing happens.
    I wonder if anyone has come up against this issue before?
    Any help would be much appreciated.

    This forum is primarily to help people who have problems downloading, installing, and/or setting up Adobe software.  Your posting appears to focus on a problem with using some Adobe software, though it is not clear which one(s).  Your best bet will be to post in the appropriate product forum.  If you need help finding the right product forum, there is a drop down list on the page linked below where you can navigate to all of the forums.
    http://forums.adobe.com/index.jspa?view=discussions
    There is a Creative Suites forum in that list as well if your problem involves suite level matters.

Maybe you are looking for