Problem playing with Multicam editing using samples from Tom's FCP 5 book?

I have some media from the DVD accompanying the book Final Cut Pro 5 Editing Workshop.
There are 4 camera angles of a music trio but unfortunately there is only audio on Camera 1.
This means that though I can switch video angles, the audio for about 75% of the final clip is missing.
Is there any way to ensure that the audio is added to all the clips and angles?

There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
in the iTunes Store.
The latest three are very in depth concerning the new Multicam in 10.0.3 and address your audio concern and much, much more.
Can't recommend them enough.

Similar Messages

  • Problem playing with 2 axioms 49 2nd generation with MainStage

    I play in a band. Me and another member are using the same controller attached to MainStage: Axiom 49 2nd generation.
    At first we configured the layout mode with 2 keyboards and two gruop of percussion pads. Then we assign each keyboard to both axiom controlllers and we named them different. then we did the same with the percussion pads, but in layout mode we couldn't find a way to name them.
    With the keyboard we found mainstage confused them a lot, and each time we started MainStage we had to reassing all the layout again. So we changed the midi channels each axiom was using: one of them to midi channel 1, the other to channel 2. No problem after that, the only thing is that we have to turn both on after starting the software.
    But the pads.....one of them never worked. In editing mode, we created two channels to play the two group of pads simultaneously (as we do with the keyboards). In each "midi in" tab, we tried to asign one of the pads. The pop-up menu give us the chance to assign mine. It was shown as: "axiom USB In Axiom 49 (10)".
    But as we went to the other channel to assign my mate's group of pads, we couldn't find it..in the pop-up menu these are the only options:
    RAKEL   (my keyboard)
    axiom USB In Axiom 49 (1) 2 (my keyboard again)
    axiom USB In Axiom 49 (10) (my pads)
    JONAY  (the other keyboard)
    multitimbric
    We tried with the multitimbric option but when I click the 11 midi channel in the pop-up menu, it shows again this four options.
    RAKEL   (my keyboard)
    axiom USB In Axiom 49 (1) 2 (my keyboard again)
    axiom USB In Axiom 49 (10) (my pads)
    JONAY  (the other keyboard)
    We tried to change midi channels straight with the axiom (the same we did with the keyboards): for me the pads were still emiting to midi channel 10 and for him we changed the group of pads to midi channel 11 (didn't work), and we tried again changing the channel to 9. Nothing works, it just doesn't show in the pop-up menu, although they are assing perfectly in the layout mode and in the edit mode the notes we play with pads are shown in the input midi screen....
    Could anyone help us?...is driving us mad and there's not too much information at the user manual or forums.
    Thanks in advance! I really appreciate your attention

    Open the Overdrive Help tab and search on "transfer" or "iTunes". You'll get selections that explain the WMA files work fine and will walk you through it. Among other things it will tell you:
    "If you plan to transfer OverDrive WMA Audiobooks, OverDrive WMA Music, and/or OverDrive WMV Video to a portable device, you may want to verify that the portable device supports content delivered in the DRM-protected Windows Media format... many OverDrive WMA Audiobooks and OverDrive WMA Music titles can be transferred to Apple devices (where permitted by publisher)."
    You must do a security update of Windows Media Player (even though you won't be using it) using Internet Explorer at http://drmlicense.one.microsoft.com/indivsite (the Windows Media Player Security Update is also in the Overdrive Tools menu, but I could not get it update). Once updated, with the iPod or other mobile device connected to your computer and iTunes open, go to the Summary pane for your iPod or other device in iTunes and click the "Manually manage music and videos" box.
    Then go to Overdive, select the book, music or video and click the Transfer button. Select some or all the chapters you want to transfer. It will find the mobile device and begin.

  • Problem with Exception Worksheet using Data from Supply Plan Data Table

    I added a series for a flag that indicates whether product is sourced from multiple manufacturing sites for a given customer and item. The flag is on the supply plan data table because it depends on the scenario. I created an exception worksheet for when the flag is set but all combinations are being displayed. If the flag is not set for a given combo then "Selected Page Item has No Data" is displayed in place of the table. I want only the combinations that meet the exception to be shown. I tried setting up an exception worksheet for customer shipments which is also on the supply plan data table but saw the same issue with all combinations being displayed whether or not the condition is met. Does anyone know of any issues with using exception worksheets with the supply plan data table? I searched the documentation and saw that exceptions behave differently with promotion series but this isn't a promotion.
    I'm using Demantra version 7.2. Thanks for any help!
    Edited by: user9253208 on Mar 30, 2010 6:40 AM

    Thanks. We have come up with a workaround. While the combinations on the left are not affected by the exception, the data in the main table is so we moved as many levels as possible into the table. The performance is slow but the data is more useful, especially when exported into Excel. I was hoping for a better solution but I guess we'll just have to stick with what we've come up with.

  • Problems with rotating/editing photos trans from ipad to pc

    Have been trying to transfer photos taken on ipad to my pc  That bit is OK  But whether i transfer individually via email or via the photo transfer app the pictures are all rotated automatically in the pc and nothing I have tried will allow me to save any amendments  I thought it was because I had uploaded from photostream but have re-uploaded the photos from the photoalbum but still having problems  it seems to default to landscape setting  Any suggestions for correcting this problems?  Thanks

    Had the exact problem.  Many pictures I took with my iphone or iPad would be rotated in photostream and I could not rotate them back to the correct orientation.  I tried emailing them, saving them under a different name, etc.  I decided to open the pictures up in Adobe Photoshop.  For some reason when it opens in photoshop the picture is oriented correctly.  I then clicked on "Save As" from the FILE dropdown menu and saved the picture back to the same folder with the same name with the difference being that I saved it as a JPEG file.  It will ask if you want to overwrite the original.  Say yes to both the windows that appear.  Once it is saved back into the photostream file the picture was corrected.  I did this with all of the rotated pictures and they were all fixed.  Hope this helps.

  • Leopard problem connecting with wifi AP using WPA PSK instead of WEP

    I cannot connect via Airport to Speedtouch 580i accesspoint using WPA PSK.
    WEP works just fine, but using WPA PSK I keep getting the message invalid password and then cannot connect wirelessly.
    Tiger as of version 10.4.3 through .11 worked flawlessly via WPA PSK with the same AP.
    I installed 10.5.4 Leopard from scratch and used combo 10.5.5 and and a few days ago combo update 10.5.6 but problem remain.
    After the clean install I used migration assistent to get user data and logins from Tiger into Leopard, having used an image made with SuperDuper.
    I have read many support forums and suggestions, it all didn't result in a working internet connection at all with WPA PSK :-...(
    What I did until now:
    - Disabled IPv6 for the airport interface
    - Changed to a simple WPA PSK password without CAPITALS instead of something like #A!$($D$%\T@q{|
    - Changed to a fixed channel in the wireless accesspoint instead of auto. http://discussions.apple.com/thread.jspa?threadID=1195706
    - Rebooted Accesspoint various times.
    - Changed to 802.11g only instead of b+g
    - Tried both TKIP and AES as encryption type
    - Disabled and re-enabled Firewall in Leopard
    - Changed to fixed ip adress instead of via DHCP for network addres assignment
    - Tried connecting with and without broadcast of SSID to AP.
    - Repaired keychain , http://discussions.apple.com/thread.jspa?messageID=5858982
    - Did various keychain changes incl deleting old values
    - Deleted some items from library, as per suggestions from forums.
    In the end I have a suspicion that it all drills down to something simple, quotes (" ") are used to present the password in the password field, at least this is the case with WEP, but this does not harm the functionality for WEP as this is working alright.
    With the current WPA PSK implementation it perhaps does influence, because it keeps saying invalid password. I have tested both with and without quotes and things did not improve at all.
    I'm running out of ideas to solve this matter, therefore I have sent a report to Apple via their Feedback webpage.
    While having using 10.5.5 fo a while I had big hopes 10.5.6 would cure the problem , unfortunately this is not the case.
    Please provide more suggestions to solve this problem.

    Checked Accesspoint firmware upgrade. The only difference between the current 4.2.7.25 and the latest version, 4.2.7.30 is the support of WDS i.e. expanding the wireless network by connecting 2 APs together (via WEP).
    Still tried upgrading via the MAC OS X update software, it did not fire up, I think the software is not fond of Leopards
    As WEP works ok with Leopard on my G4 Powerbook 12inch, I didn't want to focus further on the speedtouch because of the motto 'if it ain't broke don't fix it.'
    Am going to research more on Keychain and DHCP, others are reporting issues with it along with this 'airport crisis' http://forums.macrumors.com/showthread.php?t=375838

  • Problem playing back a song just downloaded from iTunes

    hey everyone,
    i just downloaded the Joss Stone Tell Me 'Bout It (A Yam Who? Rework) - EP and there is a problem with the radio edit of the song
    whenever i play it, it plays to the 16th second, and then it goes to the next song, but if i fast forward, it will play through the rest of the song.... i tried getting out of iTunes a re-openin it, but it still doesnt work
    the other song is fine
    can anyone help me with this?

    hope this helps
    http://support.apple.com/kb/HT1933

  • YouCam video won't play - only audio. Used link from apps page. Can see screen capture.

    Hi there,
    We recorded a 1 minute video using Cyberlink Youcam (the one on the 8.1 apps page, as opposed to the one with shortcut on the main desktop page - Youcam5.) We can see te screenshot of the video, and hear the audio for entire duration of recording, but the video screen is only green. Help please!
    Amber
    This question was solved.
    View Solution.

    Hi @amberdag,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that when you tried to playback your recording from YouCam 5, you can hear the audio, but the screen remains green.
    Have you done all your Windows updates?
    Is you Direct X, Adobe flash player and or Direcrt X up to date?
    Here is a link to How To Fix Green Screen Video Playback in YouTube in Windows 8.1 (from social.technet.microsoft.com) that should help you to overcome this issue.
    Here is a YouTube video that may also aid with this difficulty.
    YouTube Green Screen Playback Problem FIX
    Please let me know the outcome.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Creating user accounts with OIDDAS and use them from the OS

    Hi,
    I have a customer that is experiencing an error creating user accounts from OIDDAS, and use that user accounts from the operating system.
    My customer is using OID/OAS4OS 10.1.4.2.0, and that version is not longer available to download, then, I will try in my own environment
    with OID/OAS4OS 10.1.4.3.0.
    And the question is the following: is supported to create user accounts with OIDDAS and expect that users can work with OAS4OS and be
    able to authenticate in the operating system?
    For the reference, SR# 7222351.993:
    Thanks,
    Luis Vivero.
    Edited by: LV in ORCL on Dec 11, 2008 6:47 AM

    Hi Jacco,
    I didn't see your post before.
    Nop, unfortulately I don't have a document with that. I just received that answer
    from development (related to the plugin for AD that is not certified, and DAS is
    not intended to work with OAS4OS).
    Anyway, about the plugin to work with AD, this is working for me; at least I tested
    it by configuring the plugin, I configured synchronization, the mapping file, I did
    the bootstrap, and the accounts that were bootstraped now shows the OS attributes
    on DAS.
    Regards,
    Luis Vivero.

  • Video newbie needs help with multicam editing

    Hi all,
    My video editing experience is limited to a few iMovie projects, which you can view on YT (search for TheChampsTube).  For our final gig we did a 3 camera shoot, which was supposed to be produced by the videographer.  But he dropped the ball, and now I have the files - a motley assortment of m2t, mp4, xml and sfk - I'm converting with Handbrake.  My ancient iMac can't run FCP X so that's out. Also, I'm on a low budget, and will probably only need the software for this one project.  Can someone recommend an inexpensive way for me to get this footage assembled? Any help is greatly appreciated.

    You could try this technique.
    Or borrow a friend's Mac that supports FCP X and download the trial.
    Good luck.
    Russ

  • Help with email alert using email_alertcdf from download

    We are attempting to get the email alert function working. We have downloaded the files into their proper locations, ensured the JRE is installed, registered the function, updated the .udf and are attempting to execute a script.The script errors out with an "Unexpected End of File reached" error.Any help is greatly appreciated!

    Endperform wrote:Are you looking to keep your email on the server at all times?  If so, I suggest looking into setting up IMAP on your home server which will do what you need.
    Endperform:  yes that is the plan.  Do still keep getmail to fetch the pop3 email from my ISP and the setup IMAP so 'forward' onto the Arch client?
    Thanks for the reply.
    pyther wrote:I'd have to second what endperform said, if you want to keep you mail on your server at all times, just check out IMAP. Also you can organize your mail in folders with imap
    pyther: Thanks for confirming what I've googled.
    JTD

  • Need help replacing a Netgear router with my old used wrt54g from another house.

    I had a WRT54G at my old house that was working great. Now the renters moved out and I got the router back. I have been having some issues with the netgear router Im using now so I would like to replace it with the Linksys. How do I do this? Do I need to hit the reset button? What do I set the settings at and how do I set up security so others can't access my network.

    Whoaw! Take it easy Ragnar....
    It is easy to setup the router with your existing network. I'd like to know your ISP. In a way, you can have the router set up manually according to your ISP settings, whether it is cable or DSL.
    For setting up the wireless to be secured, you can check this link.
    for heads up! <<<call_me_jam_>>>

  • Multicam Editing Using a Ripple edit

    I am new to FCP. I have a 2 camera shoot of a wedding ceremony. I have my camera angles on the timeline. I have decided that in one instance that neither camera angle provided an acceptable shot so I want to shorten the sequence. How do I do a ripple edit and keep everything in sync?

    Absolutely correct. You do not need to blade anything. If the autoselect buttons are enabled for these tracks and NOTHING IS SELECTED IN THE TIMELINE, do as you described, mark an in and out and hit shift-delete.
    To confirm that you have everything setup correctly before you hit shift-delete, hit option-a and you will select the area between the ins and outs in whatever tracks have the autoselect button inabled.
    This is not to say that creativestuff's method will not work. It does work, but there are many ways to skin the proverbial cat.
    Message was edited by: Michael Grenadier
    Message was edited by: Michael Grenadier
    Message was edited by: Michael Grenadier

  • My memory has fast filled up with "other"since using Lightroom 5 , both on my MAC book pro and iMac , can someone help ?

    @

    My guess is that your operating system got updated to Mavericks and that you are running an old version of Lightroom:
    Sliders are white, look different | Mac OS X 10.9 Mavericks
    Be aware of a Lightroom bug with color management in mavericks that makes shadows too deep in the Develop module: Jao's photo blog: Serious color management bug in Mac OS 10.9 "Mavericks" and Jao's photo blog: Further quantification of the Mavericks color management problem.

  • Using Photos from Aperture in FCP X

    I am brand new to FCP X, and am trying to use photos that I have in Aperture.  When I bring the photos to the timeline, they are much smaller files that the files I have in Aperture.  How can I get the full version into my project in FCP?

    Thank you for your reply.  I tried that, and it did fill the frame, which will be very useful on this project. 
    The problem I am having is that in Aperture the photos are failry big, for example, in Aperture one image is 1.66 MB
    but when I see it in FCP it is a small file size, 49.6 KB:
    Any ideas?

  • Is it possible to edit videos purchased from iTunes in FCP?

    I know that disseminating these videos is not permitted, but if I wanted to edit for my own practise, is there a way to convert the iTunes video files into something that FCP will accept? (even if the resolution is bad)

    Maybe, I don't know. Why not go out and shoot some footage, trees, kids, dogs whatever and edit that together to your favorite song. You'll learn the log and capture process.

Maybe you are looking for