Problem PLEASE HELP ASAP

Why does my ipod touch 5 when out of battery, and when i turned it to sleep, i kept going from 20% less to above 20% what is going on?

The battery indication is a "GUESS" on the part of the software. Lithium Ion batteries do not give any outside indication of how much power they have left. They show a constant current and voltage until they are almost empty and then the current and voltage falls off a cliff. The software measures the amount of current used "So Far", and the rate that the device is using the current to GUESS how much life if left in the battery based based on how hard you are currently using the battery.
When you idle it down, the current draw is less, so the time till the battery runs out of energy will be longer, so the software GUESSES you have more battery life left than it did when you were draining it heavily.
GUESSING battery life is extremely complex, full of errors and ways it can get tripped up. About the only thing you can be sure of is when it if fully charged and when it is dead. Everything in between is a GUESS!

Similar Messages

IBook G3(Dual usb) Start up problem (Please Help asap....)

Like I have Write it on the title i have problem with my old ibook g3
It was working cool... so after one day when i try to turn it on.. It doesn't work... It make ''The startup sound'' after that only black screen .. sometimes it show a ''question mark'' on apple face and a apple icon
I have try different methodes but it doesn't work..
I have reset with PMU but still not work..
Please Tell me what do i have to do to fix it ..
Thnx Apple ..

You don't remember what version of the OS is installed on it?
If it has Mac OS X 10.2 or later, you could try starting up in Safe Mode. If this works, it will take quite awhile longer than a normal startup because it does a file check and repair of the hard disk.
Note: If the OS is earlier than Mac OS X 10.2, a Safe Boot is not an option. That is why I asked which version of the OS is installed.
If a Safe Boot into Safe Mode works you will see your normal desktop. Once completely started up in Safe Mode, try to restart normally, and go to Applications > Utilities > Disk Utility. Click on the top hard drive icon in the left sidebar and note the S.M.A.R.T. status at the bottom right of the pane. What does it say?
Select the named boot volume in the left sidebar, ("Macintosh HD" unless you've renamed it). What is the hard drive capacity and how much space remains available on it? Repair permissions on it.
See if you are able to do a little hard drive maintenance to help things out.
Do you have access to another Mac with FireWire? If so, you could try starting up In _FireWire Target Disk Mode_ with the iBook as the target disk. If this works, it will act like an external hard drive to the other (host) computer and will enable you to retrieve data from the iBook and save it to the hard drive of the other (host) computer.
Without the system discs or knowing what version of the OS is installed, we are a bit stymied in helping you out. If a Safe Boot and/or resetting the PMU doesn't help, then you are going to have to take it in for repairs. (Please note: paying for repairs may cost more than the iBook is worth.)
Good luck.

HUGE PROBLEM PLEASE HELP ASAP

Ok so I built this website in Macromedia Flash 8 and it looks
great when I preview it but now that I am uploading it to my
geocities pro account its not loading anything. Well let me
rephrase that ... the index isn't loading anything at all. I click
view and it shows a black page. Now if I view the home.swf or
contact.swf page it will show me the text of the page but not the
actual index or flash???
What the heck is going on? Can anyone help explain how to fix
this so the site will actually work for me. I have been trying to
figure it out on my own for a week now and I can not come up with a
solution to this problem I am having.
Here's the link www.sketchtc.com
not that you will see anything but a black screen.

I checked it out and its working fine for me. the only thing
i can think of why it would do that for you and not me is that you
drivers might be screwed up, and thats why in works in flash
becuase it runs it from the built in driver but if you try to run
it through the flash player or whatever player its using it having
issues...
but i dont think that right just a chance.
Sorry i couldnt help more.

Encoding problem please help ASAP!!!

So i am doing a project for school (been working on it for weeks) and i finally finished it and when i try to export it, its all messed up. I dont get an error of any kind but i get a media offline screen everywhere there is supposed to be video (.mp4) im currently using CC 2014..... I also tried exporting to media encoder and still no luck.

You have to do two things:
1. set the stylesheet encoding to japanease/unicode
2. Save the file with the same encoding using xml editor that support file saving with non-ascii charset. I think xmlspy support this.
Hadar

Hi, Please tell me how can I send the Music Videos to the I Pod From the Computer, I'm so upset about this problem, Please help me ASAP.

Hi, Please tell me how can I send the Music Videos to the I Pod From the Computer, I'm so upset about this problem, Please help me ASAP.

Here:
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
or
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad

Hi I need a password, CPNU94094BO please help asap much needed

Hi I need a password, CPNU94094BO please help asap much needed

Hi,
In that case, the only option left to try would be to remove the rtc cell - see Page 63 of your Maintenance & Service Guide - then hold down the power button for 30 seconds.
Leave the notebook like this for 20 minutes, then replace the rtc cell, reassemble and try booting again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Please help ASAP! I downloaded an app to change the Windows 10 login screen & now the screen flashes

I downloaded Windows 10 Login Background Changer and now when my laptop starts I can't even get to the login screen. After the Acer screen at startup, it says "Please Wait...." but then the screen just flashes continually. Please help ASAP! Thank you!

I did the exact same thing and had a very similar issue (flashing lock screen and couldn't get past the lock screen). I tried a system restore, resetting my PC, doing a clean install of Win10, and both methods of booting in SafeMode -- none of these methods worked. Called Microsoft several times; Level 1 tech told me to do a USB installation of Win10 (couldn't get my laptop to restart the way the USB installation needed); Level 2 tech told me to do a USB installation of Win8.1 (again did not work because my laptop could not restart properly). Gave up with tech support. The only way i was able to fix this problem was by choosing the "restore PC to factory settings" option. All your files and programs will be lost, but all of mine were already lost anyway after I tried doing a clean install of Win10. My laptop (S7-392) restored to Win8; I updated all my drivers and then made a recovery drive; did a USB installation of Win8.1, updated drivers and made another recovery drive. I have since done a USB installation of Win10 and upgraded my drivers. IF the same issue happens again i'll just end up reverting back to Win8.1 for a while.

Memory problem please help Idmediently

Hey guys, Ive got an ipad 3 (16gb) and I had a look on my memory i have a few games and apps (GarageBand, keynote, imovie, pages, monoply, game of life and a few others) and it said 12.2 gb used and 1.2gb available i think that's counted wrong and I know approx 1000mb is 1gb it's impossible what do I do to get it accurate, even my brain holds more memory than that! Please help ASAP also I've tried restarting it
Here is a list of apps:
GarageBand 696mb
Imovie 531mb
Ibooks 366mb
Keynote 362mb
Numbers 336mb
Pages 311mb
And 52 apps are 150mb and under
I know that I had the same number of apps yesterday and the memory was 8.2gb I want it to be accurate.
Reply ASAP.

Centipedee, No memory problem, you don't have enough room. It can take at least 2 times the required memory to load an app to the iPod. Once it loads it only requires 1.8GB of memory space but to get it there you'll need at least (maybe more) 3.6GB of space, I know it sounds screwy but it's how it works. Hope this helps, Good luck.

When I try to download songs from itunes it says I have to answer my security questions(which i made a year ago) I can't remember them, and I can't get on my email to reset the questions.. please help ASAP!

I recieved an ipod 5 for a early christmas present a day ago, I already owned an ipod 4 so i just used my info from that ipod as a back up for my 5g. but now when i try to download music from itunes it says i must use my security questions (which i made over a year ago) I can't remember the answers and i can't get on the email that it sends the reset info to. i don't know what to do and its really frustrating. please help ASAP!

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
Whichever method you use, you probably won't get a response until the 26th. If you absolutely must make a purchase before then, create a new Apple ID; you won't be able to transfer previous purchases or iTunes Store credit to it.
(95471)

My 2nd Gen ipod touch will not sync music i have bought on it to my computer... Please help asap!

Whenever i plug it into itunes, it says Syncing, but when i click my purchased tab, only 218 of my 276 songs sync with the computer. I need to update my ipod soon, but before i can do this i have to make sure all of the songs are synced. All of them were purchased on itunes, using my touch.
Please help ASAP! if there is any more information you need to help me with this, just email me or comment. thanks!
[email protected]

It sounds like you want to transfer iTunes purchases to your computer, Try this:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer

My office just bought me an iMac and I absolutely need to hook up a second monitor but there is no DVI connection on it, just a Thunderbolt. What do I do? Please help ASAP!!!

My office just bought me an iMac and I absolutely need to hook up a second monitor but there is no DVI connection on it, just a Thunderbolt. What do I do? Please help ASAP!!! The imac is a 21.5" and they also already bought an HD 21.5 ASUS LCD monitor to attach to it. I'm really trying to make this setup work but this is becoming a nightmare. Any suggestions? I looked up different VGA adapters but the only options for this would be a usb-vga connection which doesn't work on macs. Can anyone tell me if this new Thunderbolt connection will work in some way? Thanks

Using the Thunderbolt port attach a Mini-display to DVI so long as the Asus display is equipped and capable, otherwise Mini-display to VGA will also work. The Thunderbolt port is ahead devices which are not yet available to take advantage of the increased capacity in speed. Until the devices and connection cables are available, just use the port as a Mini-display port.

My iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: "unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

my iphone is on recovery mode and i can´t turn on it, when i try to recover it from itunes i get: unknown error (36), i´ve tried to do lot of things but i can´t solve my problem. please help!!

Hi, i had the same problem. Try to find the file "apple" or "itunes" don't know it anymore exactly. Ahm well you need to delet any information or just plug in your iphone into an other computer. important is that your iphone never has been pluged in this computer before. This was what i did, and it worked!

Problem Please help me.....Let me know the area to look for it I am a DBA..

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsPRD' unknown
TIME        Wed May 04 08:59:06 2005
RELEASE     620
COMPONENT   NI (network interface)
VERSION     36
RC          -3
MODULE      ninti.c
LINE        428
DETAIL      NiPServToNo
SYSTEM CALL getservbyname
COUNTER     1
   at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
   at SAP.Connector.SAPConnection.Open()
   at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
   at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
   at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
   at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
   System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
   System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
   SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
   SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
   SoftwareKeyUI.search.LoadRegionDetails()
   SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
   System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
   System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
   System.Web.UI.Page.RaiseChangedEvents() +115
   System.Web.UI.Page.ProcessRequestMain() +1099

The error is a very basic one - the sapmsPRD service is not known. You will have to go to <NT_ROOT>\system32\drivers\etc and add the entry sapmsPRD 3600 to this file.
This is basically telling the requester at what port to look for the message server.
C

Problem Please help me.....Let me know the area to look for it

Problem Please help me.....Let me know the area to look for it I am a DBA..Thanks in advance to let me know the cause and the area to look and fix it...
Server Error in '/' Application.
Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.Services.Protocols.SoapException: Problem with SAP/BAPI. SAP.Connector.RfcCommunicationException: Connect to message server failed Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD LOCATION CPIC (TCP/IP) on local host ERROR service 'sapmsPRD' unknown TIME Wed May 04 08:59:06 2005 RELEASE 620 COMPONENT NI (network interface) VERSION 36 RC -3 MODULE ninti.c LINE 428 DETAIL NiPServToNo SYSTEM CALL getservbyname COUNTER 1 at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode) at SAP.Connector.SAPConnection.Open() at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn) at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn) at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type) at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SoapException: Problem with SAP/BAPI.
SAP.Connector.RfcCommunicationException: Connect to message server failed
Connect_PM MSHOST=prddb01.lamrc.com, R3NAME=PRD, GROUP=Prod HR PRD
LOCATION CPIC (TCP/IP) on local host
ERROR service 'sapmsPRD' unknown
TIME Wed May 04 08:59:06 2005
RELEASE 620
COMPONENT NI (network interface)
VERSION 36
RC -3
MODULE ninti.c
LINE 428
DETAIL NiPServToNo
SYSTEM CALL getservbyname
COUNTER 1
at SAP.Connector.SAPConnection.ThrowRfcException(RFC_ERROR_INFO_EX rfcerrInfo, Encoding encoding, String languangeCode)
at SAP.Connector.SAPConnection.Open()
at SAP.Connector.SAPClient.RfcInvoke(String method, Object[] methodParamsIn)
at SAP.Connector.SAPClient.SAPInvoke(String method, Object[] methodParamsIn)
at SoftwareKeySAPG.SAPProxy1.Z_Bapi_Load_Kpi_Region(ZSOFT_KPI_REGIONS_MTable& Kpi_Regions, ZSOFT_PROD_TYPETable& Prod_Type)
at SoftwareKeySAPG.SAPGSK.LoadKPIRegion(DataSet dsProduct)]
System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +1503
System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +218
SoftwareKeyUI.InstalledBaseDataWS.InstalledBaseData.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBaseDataAccess.LoadKPIRegionMulti(DataSet products)
SoftwareKeyUI.InstalledBase.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.FilteredAccess.GetRegionDetails(Int32 userId, String product, String regionType)
SoftwareKeyUI.search.LoadRegionDetails()
SoftwareKeyUI.search.regionType_SelectedIndexChanged(Object sender, EventArgs e)
System.Web.UI.WebControls.ListControl.OnSelectedIndexChanged(EventArgs e) +108
System.Web.UI.WebControls.DropDownList.System.Web.UI.IPostBackDataHandler.RaisePostDataChangedEvent() +26
System.Web.UI.Page.RaiseChangedEvents() +115
System.Web.UI.Page.ProcessRequestMain() +1099

Hi
You should make a mapping for the service sapmsPRD in your /etc/services file (On Windows: C:WINDOWSSYSTEM32DRIVERSETCservices). If your instance number is 00 you will have to add the following entry:
sapmsPRD 3600/tcp
Good luck!
René van Es

[TV@Master] Problem please help

I have Msi.mother board PT8-Neo -LSR , Model No.Ms-6799 , main board bios -Phonenix ,maind board version i updat it to 2.2 , cpu size 2.4 G celleron D/256/533 , memory size 256DDram (400),display card Nvidia Riva TNT2 model 64
the problem that i face it when i put my TV@nywhere -master card ,the pc stop at the main page that show the biso version and name of bios company and the letters do not bost well it look like a virus work , and when i take tha card off the pc go normally , i tried put it to other PCI the same problem
please help

i meany by fix the problem of getting the pc go on to windows with card on PCI salot but i still have the broblem of the driver
please read my reply again
my operating system is win me and i have also another pc have XP
when i log in to windows the system show that found my TV@nywhere card but it didnt took the installatin driver for it i tried to install the driver directly
but it give me this 2 mesages when i try to install the driver
MSI TV card is not found ,stop the installation
the other message is
MSI pvs driver installatin failed
i download the driver from msi page also give me the same messages
for known on Device Manager it show me that the driver there but do not have the driver and the ? mark beside them
what to do now

Problem PLEASE HELP ASAP

Similar Messages

Maybe you are looking for