Problem printing across ipsec-secured link
The vsat link between locationA to LocationB have been secured using ipsec. I have a problem printing across an ipsec-secured link. Every other traffic flows correctly but when i try printing from locationA to LocationB, only the first line prints. the other lines fail to print. When i remove ipsec from the routers, the printing is successful. I would appreciate any suggestions. thanks
See if setting mss on the link to the vsat cloud helps.
ip tcp adjust-mss 1350
Similar Messages
-
I have problem with iTunes story (secure link to itunes store failed). I make In the "Command Prompt" screen, type in netsh winsock reset the itune story is solve but after i close itunes the problem is back
The results show that you have a proxy server set and this can often cause problems with iTunes.
The proxy setting can be accessed in Internet options>>Connections>>LAN Settings.
Try un-checking the proxy server check box.
It might also be a good idea to run a malware check if you didn't know you had the proxy server set.
You can download a free version of an excellent scanner- Malwarebytes here:
http://www.malwarebytes.org/ -
A problem to have a secure link to itunes store
hi guys
i have a problem with my iphone 3gs i just unlocked my thru at&t but in order to complete the process i have to restore my phone i did resore it like few times and just keep stucking at the activation point and everytime i connect it to the itunes give that msg "
We're sorry, we are unable to continue with your activation at this time."
and when i run the diagnostics it just says "secure link to itunes failed "
and here is the diagnostics report
Microsoft Windows Vista Home Premium Edition Service Pack 1 (Build 6001)
Acer Aspire 5810T
iTunes 11.0.2.26
QuickTime 7.7.3
FairPlay 2.3.31
Apple Application Support 2.3.3
iPod Updater Library 10.0d2
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 6.1.0.13
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 00AFBB0803CFF380
Current user is not an administrator.
The current local date and time is 2013-04-30 20:51:58.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.0.2.26 is currently running.
iTunesHelper 11.0.2.26 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {47F96457-EF2B-4C82-BD36-5DEA5302A88F}
Description: Atheros AR5B91 Wireless Network Adapter
IP Address: 10.0.0.10
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.0.1
DHCP Enabled: Yes
DHCP Server: 10.0.0.1
Lease Obtained: Tue Apr 30 20:24:06 2013
Lease Expires: Wed May 01 20:24:06 2013
DNS Servers: 10.0.0.1
Adapter Name: {10FAFB6D-C08D-4BF5-AC21-787996885DD4}
Description: Atheros AR8131 PCI-E Gigabit Ethernet Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 19:00:00 1969
Lease Expires: Wed Dec 31 19:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2013-04-30 20:27:58.
and my laptop runnig with a win vista home premium
please help i've been looking for two month and i couldn't find a way to activate my phoneHello black jack 1986,
For troubleshooting information on this, take a look at this article:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Since the update or restore did not complete you may also want to look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Hope this helps,
Mario -
Problem in printing across columns
Hello,
I have a requirement to print the records across, for which I created the RTF template and was able to print across using @column.
But here is the problem..
eg:
item, reference1, reference2, reference3, attribute1, attribute2
LOT-10201, AT-123, AT-128, AT-423, PCK012, PCK900
LOT-10202, AT-111, AT-124, PCK910, PCK991
At any time there is a maximum of three references for an item. The first record has three references and prints neat. But as the second record has only two references, the attribute1 column starts at reference3 for this.
How can I make sure that if there are two references leave the reference3 as null and print attribute1 and attribute2 properly.
like
item, reference1, reference2, reference3, attribute1, attribute2
LOT-10201, AT-123, AT-128, AT-423, PCK012, PCK900
LOT-10202, AT-111, AT-124, , PCK910, PCK991
Thanks
S GuptaRefer
http://winrichman.blogspot.com/2008/09/crosstab-with-multiple-repeating.html
http://winrichman.blogspot.com/2008/08/pivot-table-cross-table-with-fixed.html
http://winrichman.blogspot.com/2008/08/cross-tabs-problem-with-grouping-and.html
Have a look at the third link, thats the one, you have use as sample.
if, Still not able to get it
Pass me the template :) and xml -
I got "secure link to itunes store failed" during a diagnostic test. unable to access itunes store and nothing i do works.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Secure link to iTunes failed. How can I fix the problem?
Secure link to iTunes store failed. How can I fix the problem?
Try resetting the iPod. Nothing is lost and it cures many ills.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears. -
i want to change my security question in my apple account. but the problem is, there is no Link shown that i could reset or change my security questions. please help!!
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(117399) -
When i open my itunes store, it says secure link to itunes failed and it doesnt load up, what seems to be the problem here? appreciate all the help i can get, thanks!
Yes, provided all the media is inside the iTunes Media folder, which is in turn inside the main iTunes folder (which is the standard arrangement) you should be able to move the iTunes folder from <User's Music> to any other path and shift-start-Tunes (option-start-iTunes on a Mac) to reconnect to it.
If the media folder has split out to another drive in the past, or media is stored outside of the iTunes Media folder, then things get a bit more complicated. I can go into details should it be necessary.
tt2 -
I just tried to print off some itunes advice but my computer froze. I re-booted it and ran the ipod diagnostic test again to get back to the screen I was on. This time "Secure Link to i tunes store failed" AND "i tunes helper not running" both appeared. Please help, all I can see is "Appears in Windows but not iTunes" at the top of the screen. Even though I only vaguely know what that means, I don't think that's the help I need.
I just tried to print off some itunes advice but my computer froze. I re-booted it and ran the ipod diagnostic test again to get back to the screen I was on. This time "Secure Link to i tunes store failed" AND "i tunes helper not running" both appeared. Please help, all I can see is "Appears in Windows but not iTunes" at the top of the screen. Even though I only vaguely know what that means, I don't think that's the help I need.
-
TRYING TO AUTHORIZE MY COMPUTER>>>>>>>on the diagnostic program says secure link failed spoke to tec.dept they say it's a Win security problem ,, turned all off problem still the same any ideas please Ipad ,
(((Strange thing is Apple want me to purchase assistance to enable me to buy from thier store)))You should send this to Apple.
-
Com.ms.security problem(printing)
When i run my applet ive got this message in the Java console of I.E. 5.5(i know that it's a print problem) :
com.ms.security.SecurityExceptionEx[pubComm01/shqPubCommEtiquettes.imprimerEtiquettes]
at com/ms/security/PolicyEngine.deepCheck
at com/ms/security/PolicyEngine.checkPermission
at com/ms/security/StandardSecurityManager.chk
at com/ms/security/StandardSecurityManager.checkPrintJobAccess
at com/ms/awt/WToolkit.getPrintJob
at pubComm01/shqPubCommEtiquettes.imprimerEtiquettes
at pubComm01/shqPubCommEtiquettes.actionPerformed
at java/awt/Button.processActionEvent
at java/awt/Button.processEvent
at java/awt/Component.dispatchEventImpl
at java/awt/Component.dispatchEvent
at java/awt/EventDispatchThread.run
that's a part of the code of my applet:
private void imprimerEtiquettes()
try {
//if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
com.ms.security.PolicyEngine.assertPermission(com.ms.security.PermissionID.FILEIO);
com.ms.security.PolicyEngine.assertPermission(com.ms.security.PermissionID.PRINTING);
//com.ms.security.PolicyEngine.assertPermission(com.ms.security.PermissionID.PRINTING);
catch (Throwable cnfe) { }
Graphics pageCourante;
Dimension zoneImpression;
int nbEtiquettes = 0;
int YCourant = 0;
int XdeBase = 0;
WToolkit tools = (WToolkit)getToolkit();
PrintJob pj = (PrintJob)tools.getPrintJob(this, "Liste des commandes", null);
what can i do ?Have you signed your applet so that it can access printers attached to the local system?
-
Secure link to iTunes store failed.. how do i fix this problem?
I tried to updates my Ipod touch 4g to IOS 5.0.1 but it said i can't connect to the serve and when I Run Diagnostics on Itune everything is fine except A Secure link to iTunes store failed.... anyone know how to fixed it?
I need help with this, been trying everything
-
I cannot get my IPad2 to print (it cannot find the printer) using a Laserjet CP1525nw color printer across a wireless network using a Cisco 1508 Wireless Controller with 49 wireless access points. HELP!!!!
What is the secret to getting Bonjour to work on it?
I can get the IPad2 to locate the HP CP1525nw printer without a hitch using a low budget Netgear WAG102 stand alone wireless access point on the same network.If it helps somebody, here is what you need to do.
It worked for me, but only in Multicast-Unicast mode.
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_tech_note09186a0 080bb1d7c.shtml -
IPSec secured L2TPv3 - one way traffic in L2 tunnel
Sigh... after 7 hours battling coming here because I've exhausted all my options to find an answer for my problem.
So here is the topology - standard (boring) IPSec secured L2TPv3 tunnel: on one side - 897 connected to a DSL box, on another side - 1921 with two interfaces.
Purpose to setup a plain L2TPv3 tunnel between those locations so computers plugged into the 897's 8-port switch interface can communicate with number of devices connected to 1921 on other side.
897:
crypto ikev2 keyring key1
peer destination_ip_address
address local_outside_ip_address
pre-shared-key key
crypto ikev2 profile default
match identity remote address 1921_outside_ip_address 255.255.255.255
identity local address 897_outside_ip_address
authentication remote pre-share
authentication local pre-share
keyring local key1
crypto ikev2 dpd 30 3 periodic
controller VDSL 0
ip ssh rsa keypair-name router-key
ip ssh version 2
pseudowire-class DZD
encapsulation l2tpv3
ip local interface Loopback1
ip pmtu
ip dfbit set
ip tos reflect
crypto ipsec transform-set default esp-aes esp-sha-hmac
mode tunnel
crypto ipsec df-bit set
crypto map local 1 ipsec-isakmp
set peer 1921_outside_ip_address
set ikev2-profile default
match address 130
interface Loopback1
ip address 172.16.1.1 255.255.255.255
interface ATM0
no ip address
no atm ilmi-keepalive
interface Ethernet0
no ip address
interface GigabitEthernet0
no ip address
interface GigabitEthernet1
no ip address
interface GigabitEthernet2
no ip address
interface GigabitEthernet3
no ip address
xconnect 172.16.1.2 1 encapsulation l2tpv3 pw-class DZD
interface GigabitEthernet4
no ip address
interface GigabitEthernet5
no ip address
interface GigabitEthernet6
no ip address
interface GigabitEthernet7
no ip address
interface GigabitEthernet8
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
interface Wlan-GigabitEthernet8
no ip address
interface wlan-ap0
description Embedded Service module interface to manage the embedded AP
ip unnumbered Vlan1
interface Vlan1
ip address 10.97.2.29 255.255.255.0
interface Dialer1
mtu 1492
ip address negotiated
ip nat outside
ip virtual-reassembly in
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
dialer-group 1
ipv6 address autoconfig
ppp authentication pap callin
ppp pap sent-username DSL_username password DSL_password
crypto map local
ip forward-protocol nd
ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 Dialer1
access-list 130 permit ip host 172.16.1.1 host 172.16.1.2
dialer-list 1 protocol ip permit
c897#
1921:
crypto ikev2 keyring key1
peer 897_outside_ip_address
address 897_outside_ip_address
pre-shared-key key
crypto ikev2 profile default
match identity remote address 897_outside_ip_address 255.255.255.255
identity local address 1921_outside_ip_address
authentication remote pre-share
authentication local pre-share
keyring local key1
crypto ikev2 dpd 30 3 periodic
ip ssh version 2
lldp run
pseudowire-class ZRH
encapsulation l2tpv3
ip local interface Loopback1
ip pmtu
ip dfbit set
ip tos reflect
crypto ipsec transform-set default esp-aes esp-sha-hmac
mode tunnel
crypto ipsec df-bit set
crypto map local 1 ipsec-isakmp
set peer 897_outside_ip_address
set ikev2-profile default
match address 130
interface Loopback1
ip address 172.16.1.2 255.255.255.255
interface Embedded-Service-Engine0/0
no ip address
interface GigabitEthernet0/0
description WAN-ACC
ip address 1921_outside_ip_address 255.255.255.0
duplex auto
speed auto
crypto map local
interface GigabitEthernet0/1
description LAN-Trunk
no ip address
duplex auto
speed auto
xconnect 172.16.1.1 1 encapsulation l2tpv3 pw-class ZRH
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 default_gateway_of_1921
logging host 10.96.2.21
access-list 130 permit ip host 172.16.1.2 host 172.16.1.1
pnc01921#
Note - 1921 is connected to the Nexus 2248TP FEX, here is the config of the interface of the FEX:
pnc00001# sh run int e101/1/6
!Time: Thu May 1 06:15:02 2014
version 5.0(3)N2(2b)
interface Ethernet101/1/6
switchport access vlan 702
Now, IPsec tunnel comes up and does pass traffic - I can ping from one l1 another l1, below is the output from 897:
sh cry ike sa
IPv4 Crypto IKEv2 SA
Tunnel-id Local Remote fvrf/ivrf Status
1 897_outside_ip_address/500 1921_outside_ip_address/500 none/none READY
Encr: AES-CBC, keysize: 256, Hash: SHA512, DH Grp:5, Auth sign: PSK, Auth verify: PSK
Life/Active Time: 86400/76 sec
IPv6 Crypto IKEv2 SA
#sh cry ips sa
interface: Dialer1
Crypto map tag: local, local addr 897_outside_ip_address
protected vrf: (none)
local ident (addr/mask/prot/port): (172.16.1.1/255.255.255.255/0/0)
remote ident (addr/mask/prot/port): (172.16.1.2/255.255.255.255/0/0)
current_peer 1921_outside_ip_address port 500
PERMIT, flags={origin_is_acl,}
#pkts encaps: 7, #pkts encrypt: 7, #pkts digest: 7
#pkts decaps: 51, #pkts decrypt: 51, #pkts verify: 51
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 0, #recv errors 0
local crypto endpt.: 897_outside_ip_address, remote crypto endpt.: 1921_outside_ip_address
path mtu 1492, ip mtu 1492, ip mtu idb Dialer1
current outbound spi: 0x852BF1F2(2234249714)
PFS (Y/N): N, DH group: none
inbound esp sas:
spi: 0x5D9DFB1A(1570634522)
transform: esp-aes esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 2, flow_id: Onboard VPN:2, sibling_flags 80000040, crypto map: local
sa timing: remaining key lifetime (k/sec): (4190855/3504)
IV size: 16 bytes
replay detection support: Y
Status: ACTIVE(ACTIVE)
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0x852BF1F2(2234249714)
transform: esp-aes esp-sha-hmac ,
in use settings ={Tunnel, }
conn id: 1, flow_id: Onboard VPN:1, sibling_flags 80000040, crypto map: local
sa timing: remaining key lifetime (k/sec): (4190863/3504)
IV size: 16 bytes
replay detection support: Y
Status: ACTIVE(ACTIVE)
#ping 172.16.1.2 sour l1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.1.2, timeout is 2 seconds:
Packet sent with a source address of 172.16.1.1
Success rate is 100 percent (5/5), round-trip min/avg/max = 20/23/24 ms
Now, L2 tunnel shows to be up on both ends as well (output from 897 here)
#sh xconnect all
Legend: XC ST=Xconnect State S1=Segment1 State S2=Segment2 State
UP=Up DN=Down AD=Admin Down IA=Inactive
SB=Standby RV=Recovering NH=No Hardware
XC ST Segment 1 S1 Segment 2 S2
------+---------------------------------+--+---------------------------------+--
UP ac Gi3(Ethernet) UP l2tp 172.16.1.2:1 UP
However, if you look at detailed output of l2tunn, you will see that the tunnel receives traffic from 1921, but does not send anything:
#sh l2tun tunnel all
L2TP Tunnel Information Total tunnels 1 sessions 1
Tunnel id 3504576447 is up, remote id is 2898810219, 1 active sessions
Locally initiated tunnel
Tunnel state is established, time since change 00:19:34
Tunnel transport is IP (115)
Remote tunnel name is pnc01921
Internet Address 172.16.1.2, port 0
Local tunnel name is pnc0DRZD
Internet Address 172.16.1.1, port 0
L2TP class for tunnel is l2tp_default_class
Counters, taking last clear into account:
0 packets sent, 763 received
0 bytes sent, 65693 received
Last clearing of counters never
Counters, ignoring last clear:
0 packets sent, 763 received
0 bytes sent, 65693 received
Control Ns 18, Nr 9
Local RWS 512 (default), Remote RWS 512 (max)
Control channel Congestion Control is disabled
Tunnel PMTU checking enabled
Retransmission time 1, max 1 seconds
Unsent queuesize 0, max 0
Resend queuesize 0, max 2
Total resends 0, ZLB ACKs sent 8
Total out-of-order dropped pkts 0
Total out-of-order reorder pkts 0
Total peer authentication failures 0
Current no session pak queue check 0 of 5
Retransmit time distribution: 0 0 0 0 0 0 0 0 0
Control message authentication is disabled
Mirrored situation on other side - 1921 sends packets, but nothing is received:
pnc01921#sh l2tun tunnel all
L2TP Tunnel Information Total tunnels 1 sessions 1
Tunnel id 2898810219 is up, remote id is 3504576447, 1 active sessions
Remotely initiated tunnel
Tunnel state is established, time since change 00:21:15
Tunnel transport is IP (115)
Remote tunnel name is pnc0DRZD
Internet Address 172.16.1.1, port 0
Local tunnel name is pnc01921
Internet Address 172.16.1.2, port 0
L2TP class for tunnel is l2tp_default_class
Counters, taking last clear into account:
815 packets sent, 0 received
69988 bytes sent, 0 received
Last clearing of counters never
Counters, ignoring last clear:
815 packets sent, 0 received
69988 bytes sent, 0 received
Control Ns 9, Nr 20
Local RWS 1024 (default), Remote RWS 512
Control channel Congestion Control is disabled
Tunnel PMTU checking enabled
Retransmission time 1, max 1 seconds
Unsent queuesize 0, max 0
Resend queuesize 0, max 1
Total resends 0, ZLB ACKs sent 18
Total out-of-order dropped pkts 0
Total out-of-order reorder pkts 0
Total peer authentication failures 0
Current no session pak queue check 0 of 5
Retransmit time distribution: 0 0 0 0 0 0 0 0 0
Control message authentication is disabled
There is a Windows box plugged into 897's G3 with IP address 10.97.2.25. I can ping from it 897's VLAN1 at 10.97.2.29. However I can't ping anything across the L2TPv3 tunnel. At the same time on that Windows box I can see broadcast traffic coming across the tunnel.
I give up. Anyone has some reasonable suggestion what might be wrong? I suspect that something is wrong at 897's side.
One last question - how can I create svi on 1921 and assign ip address from 10.97.2.0/24 network on it?Anybody? Opened ticket #630128425, no response from Cisco yet..
-
how do i print a pdf file without the 'evaluation only. created with aspose.pdf.kit' printed across each page? i have never had this problem with any previous printer. i have an hp photosmart 6515, my os is win7 32 bit on an asus netbook.
thanks for your helpHi again robysam,
I did some digging and it looks like the issue is with the Aspose.Pdf.Kit software.
Per http://www.aspose.com/documentation/.net-components/aspose.pdf.kit-for-.net/licensing.html,
"Evaluation version of Aspose.Pdf.Kit (without a license specified) provides full product functionality, but please Note : At top of all pages in the generated Pdf documents are watermarked with "Evaluation Only. Created with Aspose.Pdf. Copyright 2002-2005 Aspose Pty Ltd" as demos run with an Evaluation License."
The site says that after your trial expires (after 30 days), you will begin to see the the text on each of your PDF files.
You can apply for a temporary license by following a link on that page or follow the directions on the page to get a license.
I'm not sure why the text only started showing up after you installed the HP 6515 printer, though. It could be a case of bad timing.
Thank you,
Narissara
I work for HP.
Did my response help with your issue? Please give me Kudos by clicking the "Kudos" button to the left. Thank you!
Maybe you are looking for
-
Reference of Internal Order in Payment document
Hi All, Scenario: PO Created with IO reference- (123123123). MIGO: RM A/c TO GR/IR A/c (IO u2013 123123123) MIRO: GR/IR A/c Dr (IO u2013 123123123) TO Vendor (400000)A/c Payment Doc (KZ): Vendor A/c (40000
-
I cannot turn "off" my connection to the old harddrive, how can I start syncing my iphones, ipod to this new computer?
-
Query to find revenue of a bank
We have loan datamart and account datamart. For joining the two fact tables of loan and account, we use customer table as conformed dimension.we need to calculate the revenue,assets and liability of the bank.can anyone help us with this?? loan datama
-
Using Mail in Tiger, Messages in .mac account not deleted
I have recently upgraded my Slot loading iMac to Tiger. I have had a .mac account for many years. I'm just starting to use Mail in Tiger to see if I can filter the Junk mail. The filter training seems to work OK, but once I delete the Junk messages i
-
Airport (via Keychain I think) Keeps Changing My Wireless Network Key
I think my airport express utility is is changing the stored 128 bit WEP key for my XP wireless utility. Is is possible that this could happen via keychain? If so, how do I delete keychain entries in windows XP? Thanks.