Problem printing from Canon Selphy photo printer (CP800)

I have a Canon Selphy CP800 which was working perfectly with my Mac up until i upgraded the latter to Yosemite 10.10.2. Checked the printer settings and it doesn't offer a "postcard size" option under the Paper Size tab anymore.
Have uninstalled and installed the driver from Canon Support but still doesn't work. Anyone else experienced this before? How did you get this resolved?
Mummy val - nds to print photos for son's homework..

Hi valchiang
Check this out: How to install Canon Selphy 900 on OS X 10.10 Yosemite
Works perfectly.

Similar Messages

HT4356 How to use Canon Selphy Photo Printer (CP900) to print from iPad 3?

How to use Canon Selphy Photo Printer (CP900) to print from iPad 3? I would like to print the photos in my ipad on my Canon Selphy Photo Printer (CP900) which has wifi...

hi
ideally if you want to print from the ipad you should have an airprint enabled printer:
http://support.apple.com/kb/ht4356
however, there are workarounds, you can download a decent third party app to print such as print n share, printcentral or printdirect

Problems importing from canon mvx460

I'm having problems importing movies in iMovie 9.0.2 from my Canon mvx460 camera.
It seems that my iMac (Mac OS 10.6.7, 2.66 GHZ INtel Core Duo, 4GB 1067 MHz DDR3) doesn't recognize the camera (through firewire 800).
Is this a known issue for this camera with iMovie? Does anyone know how to solve this problem?
Many thanks!

I don't have this camera, but in general for miniDV camera, the camera must be plugged in to wall power, not batteries.
Also, if you are using a firewire 400 to 800 converter, that has been known to cause problems. It is best to use a 9 pin to 4 pin firewire cable.

IPOD Camera Connector download from Canon EOS 20D

Having problems tranferring from Canon EOS 20D. Although Apple say it is compatable all I get is Unsupported device. Any Idea's...

No worries Paul & Sam,
Unplug everthing, soft reset your iPod, connect the camera connector to your card reader and put your card in the reader before you plug it in the iPod, then connect it, let the iPod find everything and then import photo's if this doesn't work try this below:
The Belkin Reader i've got has this model number. F5U249ea if you've got the same one, it's powered off the iPod, the 60gb model should be no different. Have you got the latest iPod update installed. If you have all i can say make sure everything on your iPod is still on your computer, completely restore your iPod with the latest iPod update, then connect everything together again, if this still does'nt work, i'm not sure what you can do? i'll try and find some more info for you but try everything i've said first and i'm sure you'll get everything to work fine.
Let me know how you get on, i'll try and figure out what happened
- Mike

Can I download photos from my macbook to a Canon Selphy CP760 printer

I have a Canon Selphy CP760 - a nice compact printer. All of my photos are on my MacBook - none on a card from a camera. Can I download photos from my Mac to the little printer? I have tried using a thumb drive/flash drive, but the printer says it is an unsupported USB devise. P.S. I am technically challenged!

That makes more sense...
You can print photos directly from iPhoto to your computer.
Help here > manuals.info.apple.com/en_US/iPhoto_08_Getting_Started.pdf

Canon selphy cp900 wireless print problem

I recently bought a canon selphy cp900, am running a mac os moutain lion 10.8.2. Am unable to do wireless priting via access point. Is there a solution to this problem?

I just purchased the Selphy CP900 and had the same problem. The fix was so simple. Plug your mac into Selphy via USB. Go into System Preferences -- Print & Scan. Highlight the CP900 and "ADD" / "+" the Selphy.
Disconnect the USB from the Selphy.
Restart the Selphy Photo Print Software and it should now light up green that all is connected.
I thought the problem was with the network connection, but my mac just couldn't find the Selphy. (duh)
Anyone have an answer for how to print from iPhoto to Selphy? The only thing I can figure out to do is to drag/drop my pic from iPhoto to my Desktop. (I added Desktop folder to the list of Folders on the Selphy Software App.)
I am running 10.7.5

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

Crop to the print size before pringing
LN

Problem Printing onto CDs from Photoshop CS5 - Canon MG6150 printer

I cannot find a solution to this problem anywhere!! I have a Canon Pixma MG6150 printer and have designed a CD/DVD label using Photoshop CS5. The proportions are all correct, when printed on paper from within Photoshop I can cut out the label and it fits my printable media perfectly.
The problem is printing directly onto the CD or DVD using the printer's CD print tray. I cannot get the alignement correct -- the label will only print halfway off the media or more, so only a small section of my label appears on the CD. I have tried various settings from within Photoshop's print options and none work.
How can I get my label design to print onto the DVD or CD? Any help is HUGELY appreciated.
I am running Mac OSX 10.6.5.

I was testing other Imacs running the same photoshop CS5.1 with the new printer drivers from canon and it prints. They are running OSX10.6.8. My new computer is running 10.9.2 and it will not print from photoshop. Is the driver not compatible with the operating system? Is there something to try other than saying the driver is at fault. Do I complain to Canon to update their driver to work? What is a work around?
Thanks,

Installation problems installing new Canon MG3170 onto MAC Book Pro with OS X 10.7.5. Tried installing using set up disk. Didn't work. Uninstalled files and downloaded drivers from Canon Website. Didn't work. Uninstalled again and plugged printer usb

Having problems installing Canon MG3170. Anyone have any solutions? Here is what I have tried:-
-Installed from provided Canon disk, firstly with wireless connection, then using USB connection. Printer could not be added because the Macbook returns that the software is not available from Apple for both types of connections.
-Uninstalled software from the Canon disk, checked for software updates, then downloaded drivers (printer and scanner) from Canon Website. Again tried to install using wireless connection then USB connecton. Printer could not be added because Macbook returns that the software is not available from Apple
-Uninstalled drivers downloaded direct from Canon Website and plugged printer into Macbook using USB, Macbook recognised the printer and searched for the software, again Macbook returns that hte software is not available from Apple.
Help!

nrg adjusta,
Sorry it took me a while to repsond, Ive been pretty busy with school and work. But for my hard drive problem, I did hours and hours of more research and trying countless ways of installing and tweaking things in my laptop and absolutely nothing worked that I could do. It was very irritating because I felt like I was so close to fixing it and I was just missing a step somewhere. Though It still boggles me why the disk utility shows a different capacity for the HD's. One thing I'm going to try next is replacing the hard drive cable that goes from the internal HD to the macbook. I read somewhere that sometimes those can go bad over time, and also if you get a new, modern hard drive, sometimes the old cable (for some odd reason) might not be compatible with the new HD. So i want to test it out for myself to see it that is the actual culprit.
http://www.ifixit.com/MacBook-Parts/MacBook-Hard-Drive-Cable/IF186-018
Once I get the cable and install it I'll let you know the results and if it helped at all.
Have you made any progress on your hard drive at all? If worst comes worst for you, you can probably get a SATA to USB cable and try to reformat it that way (this is the way that worked for me, but the only problem was it wouldn't be recognized when I installed it internally. Thats why i want to try getting the new cable), and if it still wont recognize it after that, you can just leave it outside of your mac, and just boot from that. The only thing that ***** about that is you have this big hard drive handing off the side of your mac when ever you need to use it.
Heres a link for a SATA to USB. this one is good because is compact and protects the HD from damage and most static electricity.
http://www.thinkgeek.com/computing/usb-gadgets/e6d9/?srp=3
Im still continuing my search for the answer and once i find it (if ever!) I'll post it.

Canon Selphy ES 1 printing problem.

I am trying to print from my MacBook Pro (2.16 GHz Intel core 2 Duo, Memory 3GB 667 MHz DDR2 SDRAM) to a Canon SELPHY ES 1 using CUPS+Gutenprint v5.2.7 driver and connected using a USB cable. The printer and Mac recognise each other but when I print the printer job monitor says that it is Printing page 1, 100% but nothing is happening. The printer works fine when connected directly to a camera. Anyone have an idea what I can do to solve this?

Was this a printer which you had added before upgrading to Lion? If so, disconnect the printer, remove the printer from System > Add Printers, and re-add the printer.

Problem printing from Photoshop CS5.1 to Canon Pixma MX870

I downloaded most recent printer driver from Canon for my MX870 and with help from canon support I deleted previous printers in my computer and added in the new one. Also repaired permissions.
Other adobe software will print (InDesign, Acrobat) but not photoshop. When I select print, I am getting the following message: "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents" After attempting once I can't even get to the print dialogue box as the print selection is grayed out.
I am not sure what to do to get past this.
I have a new imac running OSX 10.9.2.

I was testing other Imacs running the same photoshop CS5.1 with the new printer drivers from canon and it prints. They are running OSX10.6.8. My new computer is running 10.9.2 and it will not print from photoshop. Is the driver not compatible with the operating system? Is there something to try other than saying the driver is at fault. Do I complain to Canon to update their driver to work? What is a work around?
Thanks,

Canon Selphy CP730 won't print anymore

After installing the latest iPhoto (7.0.2) my Canon Selphy CP730 Compact Photo Printer won't print photo's from iPhoto anymore. The light on the printer blinks for a second, goes red and then back to green, while an icon in the Dock shows the CP730 with a red exclamation mark.
The strange thing is that I can print from all my other applications to this device. And with the previous iPhoto there where no problems either. I already reinstalled the drivers for the CP730, without succes.
Any suggestions?
Thanks in advance,
Michel

Michel:
Try deleting the various printing pref files. One would be located in the User/Library/Preferences/ByHost folder. It would look something like this: com.apple.print.Cache.0016cb3791b6.plist (number will be different). Also com.apple.print.PrintingPrefs.plist and any obvious Canon prefs for the printer. There will be a lot of other Canon prefs but look of any that are obviously linked to the printer. You may not fine any, however.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

How to print with a Canon Compact Photo Printer CP-330?

never found a so hard issue, I'm used to plug&play hardware...
can anyone help me printing from iPhoto or Photoshop to a Canon Compact Photo Printer CP-330?
I tried with Canon's drivers, with Gimp 5, anything... one time the printer started working, then stopped after the first pass (yellow color)... frustrating...
thanks

Hi there,
If you have had no luck with the Canon or Gutenprint drivers then you may have a printer problem. Have you been able to print from it using your memory card directly connected?
If you think/know the printer is okay then I would look at the cups error log to determine why the spool is failing. This log is located in the Console application.
Paul

Problems printing from iPhoto 6: Page setup & Preview

I am having trouble printing from iPhoto v6. For starters, the miniture preview frame in the print screen does not conform to the paper size selection or image orientation. (It is always a big square.) Only part of a 4x6 image image is seen in the frame. This makes predicting the final result impossible. To make matters harder, the print dialog does not remember what paper size was last used and many internal "Advanced" options reset the paper size to "letter". Simple choosing any printer preset resets the paper size. Switching from advanced options to the iPhoto options seems to alter other selected options as wlll.
I have the most current driver for my printer. I have no problem printing from Aperture or Photoshop. I have custom color profiles and am not entirely a novice, but I am wasting much paper and ink and spraying the inside of my printer!
The use of the native iPhoto print routines seems mutually exclusive with using Advanced options. I understood that the first iterations of iPhoto wanted us to depend on the Mac Print routines, and it was always a little touchy but I would have hoped earlier problems would have been sorted out by now. I want to print my own pictures!
Much confusion and no place to find good instructions. For example, should I be using "Full Page" or "Standard Prints" Standard settings in the print interface? There appear to be several places to select print sizes but they do not seem linked together nor is it obvious which one is determinitive. Under color options do I select Color Corrections <none> or <Colorsync> which then forces me to use driver recommended by Canon despite the fact I have a custom profile identified in Color sync utility. It just isn't working for me.
Are others notiing that iPhoto print routines are no longer working for them? I would like to see the internal print routines working intuitively before additional efforts are made to facilitate purchase from outside printing sources!
G5 2G Dual PowerMac 2yr old. Mac OS X (10.4.4) Canon i950 printer

goldn:
Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
1 - create the card and type Command-P.
2 - select Stylus Photo R200 under Printer
3 - click on the Advanced button
4 - in the bottom drop down menu select Paper Handling
5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
6 - now select Print Settings in the 3rd drop down menu
7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
10 - click on Print
11 - when the paper exits the printer quickly put it back in the printer
That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

Color problem printing from iBook G4

having problems printing photos from an iBook G4 (10.3.9). The colors come out a bit over-saturated and muddy.
The same photos printed from my G5 Quad (10.4.6) come out looking fine.
I have used the iBook with a Canon ip6600 and ip6000 pixma photo printers and tried printing from iPhoto 5.0.4 and InDesign CS.
anyone else having this problem or know of a solution?

I have no idea, either.
Try these generic fixes (before reinstalling OS X):
Download the Combination Updater from Apple, use it to re-Update OS X.
Try Printer Setup Repair from www.fixamac.net.
Use a Disk Utility like Disk Warrior to repair the HD -- or, put in your install DVD and restart while holding the c key. DO NOT continue the installer - instead, find Disk Utility in the top (Finder) menus and use it to repair the hard drive.

Problem printing from Canon Selphy photo printer (CP800)

Similar Messages

Maybe you are looking for