Problem printing from window edge in windows 10

This is the first time I have ever posted on this forum so I hope I am in the right section. My wife just upgraded her laptop  from Windows 8.1 to Windows 10. We have a recently purchased a 8620 all in one printer. It worked fine with 8.1. We have necountered a problem in which we cant seem to print anything from the new Windows edge browser. The printer works fine when printing from document files or Firefox. When trying to print from the edge browser, we get the menu showing the 8620 printer and a preview but we cant seem to go anywhere from there. No print icon or anythining else. I uninstalled the printer and then went to the HP support site and reinstalled the software for windows 10 from the driver download section but I still have the same situation. It prints fine from my documents or Firefox but not from edge.  Thanks for any help with this.  

mmsteer,
I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
Remove the Adobe PDF PPDs from the following folders:
OS/Library/Printers/PPDs/contents/Resources/en.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
Be sure to go to your system Library, not your user Library.
Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.

Similar Messages

  • Problems printing from PSE 11 on Windows 8

    I have not had a problem with printing until this week. I cropped an image 6 by 4, chose 6 by 4 paper, selected borderless and got a 1cm white border. The image did not fill the preview window, so it is not a border problem. I have to use the slider to enlarge the preview image. Why???

    Of course!
    I have been a PSE user since version 2 and have been through Epson and Canon A3 printers for the last 8 years.
    The problem has only manifested itself in the past few days.  The white space around the image is far too large to be a border that is obtained by choosing a border in the print options.
    As you can see from my screenshot the preview is also wrong. The print mechanism merely reproduces what you see on the screen.

  • Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8

    Since the last update I have been unable to print from Firefox. No problem printing from Safari or any other program. I've seen a few responses to this problem but only to people running Windows. I'm on a Mac running v. 10.5.8.

    Also when I click on the link in my email to activate my account (in the hopes that a solve will be emailed to me) I get this message -
    "Something is wrong
    We could not activate your account. Please make sure that you have clicked the correct link in your email or typed in the correct address."
    Same message if I cut and paste the link.

  • Just purchased HP 8610 printer, but it won't print from my 8.1 windows computer

    just purchased HP 8610 printer, installed it wirelessly to my network but it won't print from my 8.1 windows computer.  I can print from my cell phone and I can print using the eprint function, but even though I can see it on the network I can't get it to print a document.

    Hi,
    Have you ilstalled it software and drivers on your computer yet ? Please download and run the following tool:
        http://ftp.hp.com/pub/softlib/software12/COL50849/​mp-136589-1/HPPSdr.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Problems printing from Google Chrome browser using my HP Officejet 6500 E709n Series printer

    Dear Sir or Madam:
    I am using Microsoft Windows XP Home Edition Version 2002 Service Pack 3 desktop computer.
    I have a HP Officejet 6500 E709n Series printer.
    I am encountering some problems printing from my Google Chrome browser in my Outlook.com account because when I try to change some settings in the print dialog interface the printout comes out incorrectly.
    Below are the 2 snapshots of the print dialog interface of Google Chrome browser before printing an email message from my Outlook.com account.
    Are there any software updates to correct this problem?
    Please reply back soon.
    Thanks.
    Sincerely,
    Etow

    Welcome to the forums Etow,
    I saw your post about the issue you are having with printing from Google Chrome. Have you tried disabling your pop up blocker to see if that will help? Also see this guide about Printing with Chrome.
    If the above does not help, try using Firefox or Internet Explorer to print.
    Have a great Friday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Problems printing from a Macbook Pro on a Kodak ESP7

    Hi,
    I am having problem printing from my Mac to the Kodak.  I have connected the mac to the printer through the settings as it can see it.  However, when I come to print it it says the printer is not responding and to check if it is turned on and properly connected.  I have tried reloading the printer etc but still cant get it to work.  I fired up my old windows laptop and that will print fine wirelessly so it can't be my BT Hub for the internet.
    Any suggestions would be appreciated as I dont want to go and have to buy another printer.
    Thanks for suggestions.
    Matt

    Using the OS X built-in network printing protocols
    requires a CUPS driver. Check on Brother's site to
    see if they now have a CUPS driver for your model,
    or you can try the open source hl1250 driver from:
    http://www.linuxprinting.org/macosx/hl1250/
    Unfortunately, I don't have an Intel Mac, so I don't
    know if any of these power PC drivers will work for
    you.
    Please let us know.
    I was told by a friend that the drivers are already built into the OS X 10.4.3, I hooked up the printer directly via USB and indeed it worked just fine. But, as I stated before, I just can't get the **** thing to work when the printer is connected to my PC and I try to print through the network.

  • Problems printing from iPhoto 6: Page setup & Preview

    I am having trouble printing from iPhoto v6. For starters, the miniture preview frame in the print screen does not conform to the paper size selection or image orientation. (It is always a big square.) Only part of a 4x6 image image is seen in the frame. This makes predicting the final result impossible. To make matters harder, the print dialog does not remember what paper size was last used and many internal "Advanced" options reset the paper size to "letter". Simple choosing any printer preset resets the paper size. Switching from advanced options to the iPhoto options seems to alter other selected options as wlll.
    I have the most current driver for my printer. I have no problem printing from Aperture or Photoshop. I have custom color profiles and am not entirely a novice, but I am wasting much paper and ink and spraying the inside of my printer!
    The use of the native iPhoto print routines seems mutually exclusive with using Advanced options. I understood that the first iterations of iPhoto wanted us to depend on the Mac Print routines, and it was always a little touchy but I would have hoped earlier problems would have been sorted out by now. I want to print my own pictures!
    Much confusion and no place to find good instructions. For example, should I be using "Full Page" or "Standard Prints" Standard settings in the print interface? There appear to be several places to select print sizes but they do not seem linked together nor is it obvious which one is determinitive. Under color options do I select Color Corrections <none> or <Colorsync> which then forces me to use driver recommended by Canon despite the fact I have a custom profile identified in Color sync utility. It just isn't working for me.
    Are others notiing that iPhoto print routines are no longer working for them? I would like to see the internal print routines working intuitively before additional efforts are made to facilitate purchase from outside printing sources!
    G5 2G Dual PowerMac 2yr old.   Mac OS X (10.4.4)   Canon i950 printer

    goldn:
    Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
    1 - create the card and type Command-P.
    2 - select Stylus Photo R200 under Printer
    3 - click on the Advanced button
    4 - in the bottom drop down menu select Paper Handling
    5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
    6 - now select Print Settings in the 3rd drop down menu
    7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
    9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
    10 - click on Print
    11 - when the paper exits the printer quickly put it back in the printer
    That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

  • HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

    Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network.  No problem printing from my devices, but the following day, it is looking for AirPrint printer, why? 

    Hello lenc48,
    Welcome to the HP Forums.
    I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
    I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
    Please click on the first link that will give you instructions on Uninstalling the Printer Software.
    Once the software has been removed, please disable any anti virus protection that you may have on the Mac. 
    The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
    The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
    If you are still having issues, feel free to write me back or you can contact HP Total care direct.  If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
    Thanks for your time.
    Cheers, 
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    Hi,
    Apple's AirPrint only support specific models while using wired or wireless network connection.
    Plugging a printer into a USB port of Apple base is not supported for AirPrint:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
    http://support.apple.com/kb/ht4356
    There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
    http://www.ecamm.com/mac/printopia/

  • Problems Printing from Epson 2400 in Lightroom 2.3

    I'm in the process of switching over from a PC to a Mac. I've gotten lightroom running and transfered all my photos over. But I'm having two big problems printing from my Epson 2400.
    *8.5x11 prints are offset. The top of the picture starts about an inch lower than it should, and the bottom typically gets cut off.
    *Lightroom refuses to print 4x6 prints. It says it's printing, and the paper feeds in, but then the printer just spits out a blank page.
    I'm using the most current version of the Epson 2400 driver that I could find on the Epson web site.
    [Update] I used iPhoto 9 to print out some pictures, and they came out fine. So this seems to be a lightroom issue or a conflict between the lightroom/epson drivers.
    Any help would be greatly appreciated.
    Thanks!

    Further update. It appears that I can print perfectly from another account on the same mac. But the account on which my catalog resides doesn't work at all. Could my catalog have been corrupted when I transfered my photos and catalog over to the new mac from the pc? Is there any way that I can fix it? (I have tried optimize and relaunch; no luck.)
    I could -- as a last restort -- kill the catalog and reimport all my thousands of photos, but wouldn't I loose the keywords and adjustments?
    Any help would be greatly appreciated!

  • Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print?

    Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson 835 Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print? I have followed all the instructions from Epson about upgrading, etc. but it is very frustrating when I have to repeatedly try to print. Epson says talk to Apple???

    Try checking thru these, maybe some help.
    Mac OS X: How to reset the printing system
    http://www.macworld.com/article/2029528/mac-troubleshooting-what-to-do-when-you- cant-print.html
    Also try deleting the printer from your printer Q system preferences, then reinstalling it (highlight the printer click the minus symbol, then click the plus symbol and add it again. Reboot, and try.

  • Problems printing from Adobe 9

    Hi, I am having problems printing from Adobe 9. I can open documents OK but when I try to print them it takes me through the normal print screens, then when I press print it says unable to print document followed by page not selected.
    I have also try to delete Adobe 9 and reinstall but when I come to reinstall, I have to click on the grey box at the top of my screen to agree to allow the instillation to take place and everything just freezes up and I have to ctr alt del to move on.
    Everything was working fine until the last couple of days
    Any help would be much appreciated

    My problem is the printing will eventually happen but I have to wait for as long as half an hour. What gives? Are there worms in the Acrobat 9 product? How can I resolve this problem?

  • Print problem - prints fine in photoshop and windows but direct from illustrator is off centre when printed.

    when printing a full page image from illustrator the print is off centre and does not print the image in line with the paper. the same image prints just fine in photoshop and as a jpeg from windows own program. the positioning is zeroed in the dialouge box and the preview image shows how it should print, but it does not print as shown. please help.

    clarke,
    What happens if you Save a Copy as PDF, then print from Acrobat or Reader?
    If that helps, you may consider trying to (find and) use a PostScript (emulatin) printer driver to your printer, if possible.

  • Can't print from iBook G4 via Windows XP to an HP PSC 1410

    Hello,
    I realize this question is very similar to others on this discussion but I haven't been able to find an answer to my problem.
    I cannot print from my iBook via XP to an HP PSC 1410.
    I can print from my iBook via XP to an HP LaserJet 4L.
    I was able to print from my iBook via XP to an HP882C that was connected
    to the same USB port that the HP PSC 1410 is connected to now.
    I have an iBook G4 running 10.4.3
    I have a PC running XP with an HP LaserJet 4L on a parallel port and an HP PSC 1410 on a USB port.
    I installed the following from http://www.linuxprinting.org/macosx/hpijs/
    hpijs-foomatic-2.02.ppc.dmg
    espgs-7.07.1.ppc.dmg
    HP-PSC_1400-hpijs.ppd
    I think I correctly followed the instructions at:
    http://www.ifelix.co.uk/tech/3015.html
    They worked for the LaserJet printer.
    When I attempt to print from the iBook to the 1410 the HP doesn't print at all.
    I don't see any error messages on the iBook. The document gets spooled onto the Windows print spooler, the printer even starts making noises, the print heads move about a bit and then stop. The print job just sits there in the queue with a status of "Printing". The print job is then stuck and hard to delete.
    I don't need to be able to scan or check ink levels from the iBook.
    I would just like to be able to do color printing.
    What else should I try? Given the symptoms where might I be going wrong?
    Any suggestions would be appreciated.
    iBook G4   Mac OS X (10.4.3)   1 Gig RAM

    I found the answer to this problem on Linux printing provided by Steve Stuart.
    Dave
    Steve Stuart wrote at: http://www.linuxprinting.org/forums.cgigroup=linuxprinting.macosx.general;articl e=1446
    Hi all,
    I finally figured out what the issue was, Why it fixes it I can not say,
    but it does.
    On the Shared printer on the Windows side, go to the properties of the Printer.
    Go to the Ports tab, and deselect the "Enable bidirectional Support" (do not
    have it checked). Once this is done and you also do not have any firewalls
    setup on the Windows machine (Windows, MCAfee, Norton, ....). You should be
    able to print.
    Finally!!!!! I hope this helps many many people. As I have had many
    people asking for the solution if I found it.
    Thanks,
    Steven Stuart

  • Can"t print from iBook G4 to windows HP890c Printer

    I have been trying to print from an apple iBook G4 to a HP 890c Windows printer. I can see the 3 pc's in the workgroup from the apple and can file share with them but cannot print. I can install the HP 890C in windows printing using the dialog boxes but I get the NTStatus_BadName error when attempting to print.
    Which computer do you download and install the hpijs and the ESP ghostscript? I imagine its to the PC which the printers are attached but want to verify.
    Also, even though I added the iBook G4 to the workgroup, it does not show up. It does show up with servers. I cannot see the ibook from any of thje PC workgroup computers. Could this be part of my path problem.

    hpijs and ESP ghostscript are for OS X. But, you have a network-capable driver (Deskjet 890C, Gimp-Print) already included in OS X. Your problem appears to be in the Windows sharing (Samba=smb) system.
    Try adding the printer using the advanced windows printing method: After clicking add, Hold down option key and click More Printers. Select Advanced at the bottom of the first menu. Select Windows Printing via Samba (I think that's what it says). Enter the URI like this:
    smb://[IP address of server]/[printer share name from Windows]

Maybe you are looking for