Problem printing in Windows XP after patch 14

I cannot print anything in a CRADEN, everything used to work ok, but after that patch it just isn't working.
If I call the report thru a form it just loads the runtime but prints nothing. And by the way I 've made no changes, in another computer with the previous patch it used to work just fine.
thanks anticipated.

Hi,
Welcome to the Discussions.
I had the same problem recently with a Brother printer. I used LPD/LPR. To access it hold down the option key as you click on Add Printer, click on the drop down menu and select Advanced. Select LPD/LPR from the list, enter the printer's name (from the Sharing properties of the PC) in Device Name and in the URI box enter IP_address/printername and then select the driver (CUPS if available) and click OK. If this doesn't work see the following link for iFelix's excellent setup guides.
http://www.ifelix.co.uk/tech/3004.html
John

Similar Messages

Problems printing from other programs after printing using Word automation

I have an application that uses ActiveX to build a Word document. My print VI is attached. The problem that users are reporting is that after printing a report with my application, they can't print from any other programs until they restart their computer.
After my print VI runs, the only other Word automation is Document.Close and Application.Quit. I close all my references religiously and winword.exe closes just fine. I don't know what would be hanging around causing other programs to have trouble printing. One thing I don't like is the ActivePrinter property in Word. It changes the default printer in Windows. This is why I reset it using the printer LabVIEW reports as the default. I tried reading ActivePrinter and storing it in a wire, then resetting it with this string, but then even weirder things happened - the printout got all messed up. This is why I'm using the printer that LabVIEW says is the default.
Has anyone ever encountered anything like this?
Message Edited by Marc A on 01-12-2007 11:03 AM
Attachments:
Word_print.PNG ‏18 KB

goldn:
Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
1 - create the card and type Command-P.
2 - select Stylus Photo R200 under Printer
3 - click on the Advanced button
4 - in the bottom drop down menu select Paper Handling
5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
6 - now select Print Settings in the 3rd drop down menu
7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
10 - click on Print
11 - when the paper exits the printer quickly put it back in the printer
That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

Quality problem printing in Windows 8.1 with CP1215

Recently purchased new laptop with Windows 8.1 Pro. I have had my printer for years, CP1215, via USB, without having any problems printing to it with Windows 7 Pro. I first noticed that the quality of print I receive out of my printer on the new laptop is darker. The darkness comes from black lines going diagonally across the page. I would estimate at approximately a 2 degree angle. I would also estimate that the lines appear every 4th pixel row. I have attached 2 images, printed on 2 different printers. The one on the top is the one off of my CP1215, the one on the bottom is a color copier in my office. I have zoomed in incredibly on the prints to show the lines. Just never had problems with this printer in pre Windows 8.1 days. Tried installing ljcP1215-HB-pnp-win64-en. Tried uninstalling printer, rebooting, then installing, still same problem. I also have another problem with printing, but suspect it is more of a Microsoft problem. My laptop thinks a network printer goes offline, stopping and restarting the print spooler service seems to fix that. I had to make a .bat file on my desktop to do it, it happens at least 2 times in an 8 hr work day.

Hi paulie99, Welcome to the HP Forums, I hope you enjoy your experience! I understand the printer isn't printing properly from Windows 8.I will be happy to help you. Check your printer driver settings. 1. On the File menu in the software program, click Print.2. Select the driver, and then click Properties or Preferences.3. Click the Paper/Quality tab.4. In the Type is or Size is list box, select the correct media type or size. Set the quality to ImageREt 2400. I have provided a document to install the Windows print driver to see if that makes a difference.Installing the Printer Software in Windows 8.1 for a USB or Network Connection. For the network printer I would setup a static IP address. Please let me know the results if you are still having issues. Thank you for posting on the HP Forums.Have a great weekend!

Problem with SAP Transaction iView after Patch 34 install

Hi All,
We're running EP6SP2 on AIX/Oracle and have currently upgraded from PL5 to PL34.
The problem we are now having is as follows:
We have an SAP Transaction iView that is using the 'Auto' method for the 'Technique to start SAPGUI for Windows' and the 'WinGui' as the 'SAP GUI Type'.
Now when we click on the iView we are getting the IE popup that asks us if we want to Save, Open, or Cancel the file open for tx.ssd
Prior to the patch upgrade we did not have this issue.
Any help would be appreciated.
Thanks,
Robin.

Hi Praveen,
Thanks for the quick response.
I have seen those notes already and unfortunately they don't solve this specific problem. These will solve the problem for the SSD method (.sap file) of starting the SAPGUI for Windows but not for the SSF method (.ssf file).
The main issue is that before the install of the Patch we did not get the popup, everything worked fine. It doesn't make sense why we would have to change our IE settings now to get it to work properly. It should work the same as before the patch.
Plus, I don't want to have to do an SMS push to all the PC's here to fix a problem with a Patch upgrade.
I have tried to add the .ssd and .sap types to the Mime section for the http service in the Admin tool but this hasn't fixed the problem either.
Also, I found that in Patch 31 SAP has made a change to the way the SAP GUI for windows starts. After some searching I found that in the file WinGuiRenderLayer.properties under
the 'com.sap.appintegrator.sap/property/Transaction/' folder I see that it has some entries in it that look like they relate to the above mentioned fix for Patch 31. The lines in particular are:
- # postfix for roundtrip URL - should help IE to detect the mime-type
- SSF_URL_Postfix = /tx.sap
- SSD_URL_Postfix = /tx.ssd
These lines were not in this file prior to implementing the patch and I believe that this may be causing the problem.
Any other suggestions would be appreciated.
Thanks,
Robin

Problems printing on windows vista

when I open an adobe document I have a message : " Insufficient Data for an Image"..
Then I can see the pdf document, but if I'm reading on windows vista over adobe 9.0 I can't print it...
If I do that job on windows xp (Adobe reader 9.0).. I don't have any problem..
I am missing something?

Hello
please take a look in SAP marketplace. There are a number of important OSS available regarding"general" topics of WWI (recent version of WWI) and common questions. MOst of the OSS are of type "recommendation / additional info" etc.
It is known that not all combinations of Windows version together with WWI version together with SAP version together with Adobe version are suported or that problems can come up.
Main issues are:
- used Word version
- Used Windows version
etc.
With best regards
C.B.
PS: take a look in this thread EHS- WWI Label printing issues with Word 2007
regarding important OSS notes
Edited by: Christoph Bergemann on Sep 12, 2010 8:29 PM
Edited by: Christoph Bergemann on Sep 12, 2010 8:30 PM

Problem printing in windows xp shared printer

Hello!
I have a Brother Ql-550 label printer shared in a windows xp pc and i would like to print with my mac. In the print menu i can see the printer in the windows priting section but when i try to choose the driver for the brother printer from mac os, that i have installed previously this does not appears in the brother section. I think that this driver don't allow network printing. Is there any way to make this printer work? For example, any kind of virtual printer o something in that way.
Thanks.

Hi,
Welcome to the Discussions.
I had the same problem recently with a Brother printer. I used LPD/LPR. To access it hold down the option key as you click on Add Printer, click on the drop down menu and select Advanced. Select LPD/LPR from the list, enter the printer's name (from the Sharing properties of the PC) in Device Name and in the URI box enter IP_address/printername and then select the driver (CUPS if available) and click OK. If this doesn't work see the following link for iFelix's excellent setup guides.
http://www.ifelix.co.uk/tech/3004.html
John

Problems booting a Windows partition after failing to install and uninstall NTFS 3G

Hi,
I run Windows on my Mac and I installed MacFuse and NTFS 3g today to see how would they work together. It was a terrible decission...!! After restarting the computer a window popped in the desktop with the following message:
NTFS-3G could not mount /dev/disk0s5
at /Volumes/BOOTCAMP because the following problem occurred:
Did not receive a signal within 15.000000 seconds. Exiting...
Afterwards I uninstalled NTFS 3g from System Panel but had problems uninstalling MacFuse. Curiously, I didn't find any preferences file of any of them. Anyways, I dived in some forums and about diferent ways to tackle this, of which I followed this one by bredikhin:
Link: https://discussions.apple.com/thread/3942492?start=0&tstart=0
This succeeded in unistalling MacFuse, but didn't allow me to boot Windows at the menu you arrive after pressing and holding the option key. Nonetheless, I can read the files in the Bootcamp partition from Mac.
I'm using a MacBook Pro running OSX 10.8.4 on a 2.3Ghz Intel Core i7 processor with 4GB of memory
Thanks in advance!

As has been said, Windows 8.1 isn't formally supported yet, though I have it installed on mine.
Sadly many people have had problems with Bootcamp on Mavericks, especially on later Macs.
Some have had success by creating the bootcamp partition with Bootcam Assistant then rebooting in to OSX and deleting that partition then creating a new exFat partition in its place, named BOOTCAMP.
That partition can then be re-formatted NTFS by the Windows installer which then makes it usable.
Others have been less successful.
If all fails Google can turn up various workarounds until Bootcamp/Mavericks get sorted out (and 8.1 becomes supported).

Problem printing from window edge in windows 10

This is the first time I have ever posted on this forum so I hope I am in the right section. My wife just upgraded her laptop from Windows 8.1 to Windows 10. We have a recently purchased a 8620 all in one printer. It worked fine with 8.1. We have necountered a problem in which we cant seem to print anything from the new Windows edge browser. The printer works fine when printing from document files or Firefox. When trying to print from the edge browser, we get the menu showing the 8620 printer and a preview but we cant seem to go anywhere from there. No print icon or anythining else. I uninstalled the printer and then went to the HP support site and reinstalled the software for windows 10 from the driver download section but I still have the same situation. It prints fine from my documents or Firefox but not from edge. Thanks for any help with this.

mmsteer,
I think I may be able to help you with this problem, which I was having with CS4 when I first upgraded to Lion, and others were having with CS3. This fix is courtesy of Aisolve on these discussion boards:
Remove the Adobe PDF PPDs from the following folders:
OS/Library/Printers/PPDs/contents/Resources/en.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_CN.lproj,
OS/Library/Printers/PPDs/contents/Resources/Ja.lproj,
OS/Library/Printers/PPDs/contents/Resources/ko.lproj,
OS/Library/Printers/PPDs/contents/Resources/Zh_TW.lproj,
Be sure to go to your system Library, not your user Library.
Also, regarding my current problem, I spoke with an Apple tech person and found that the 10.7.2 upgrade apparently is the culprit, and is incompatible with wireless printing to my Lanier printer. I CAN print connected through USB. That's a work-around for now, but I'll need to contact Lanier about upgrading their driver for OS X 10.7.2.
Aisolve was helping me with this issue, too, and assures me that if I'm able to generate a postscript file (which I was), and able to generate a PDF by distlling it through Adobe Distiller (which I am), then I can safely assume that the problem lies with the hardware, in this case the printer driver. This lines up with what Apple told me.

How Do I Redirect LPT1 Printer Port to 'LOCAL Printer' in Windows 7

I have previously redirected LPT1 Port to a 'Network Printer' as well as 'Print Server' with NO PROBLEMS.
However, I have NOT been able to redirect LPT1 Port to a 'LOCAL' PRINTER. I have already set up:
- new HP Laser Printer (tested, no problem printing in Windows)
- the printer is SHARED, shared name is "HPLaser" (tested by viewing Shared Printer Name and Computer Name in DOS)
- bat file as --> Net
use Lpt1 \\DkTop1\HPLaser /persistent:yes
(I checked to ensure the 'Computer
Name' and the 'Shared
Printer Name' are correct. Tested by running bat command, no
error message)
When printing in DOS and viewing "What's Printing" from Printer Icon,
- the DOS print job appears immediately as "spooling",
- then "printing" and "USB001" Port.
So, it appears to be printing from the DOS application, also
note NO ERRORS from DOS Program or Windows but it does NOT print.
The only difference between the 'Local Printer' setup and
the 'Print Server Printer' setup is,
the 'PRINT SERVER'
goes to an "IP Address w/Standard TCP/IP Port"
and the 'LOCAL PRINTER'
goes to "USB001 Virtual Printer for . . .".
IS THERE A PROBLEM in
SETTING UP THE 'LOCAL PRINTER'
with 'USB001 VIRTUAL PRINTER' Port???
If so, how do I resolve? If not, please note what is the problem(s) and resolution(s). Thanks.

Hi,
you install the new printer, which port you choose to use? What do you mean by saying "'USB001 VIRTUAL PRINTER' Port"
here?
As the printer is configured locally, there is no need to redirect the port to it.
Install a printer
http://windows.microsoft.com/en-hk/windows/install-printer#install-printer=windows-7
Here for more information:
http://windows.microsoft.com/en-hk/windows-vista/add-or-remove-a-printer
If possible please take a try to delete the printers holding the Lpt1 port, then reconfigure the local printer following the instructions provided above.
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

OracleCSService unable to start on win2003 node after patching to 10.2.0.4

Hi,
Anyone facing problem starting the CS service after patching to 10.2.0.4 on 1 win2003 node while other win2003 node works fine?
Well seems I found the solution to it. Pl read on if u r facing same problem:
1. on the non-working node goto the log folders inside "$ORACLE_HOME/log/<node1name>/css/cssdout.log"
2. if u see any errors like ssmain_run_css going into looping then
3. from cmd run "crsctl check boot"
4. check any dll error reporting...(in my case it was orahasgen10.dll)
5. compare this dll size/date with the one on working node.
6. If its different copy same dll from workingnode to non-working node.
7. try restart oraclecsservice. It should start now.
Hope this helps. I spent a lot of time researching this so hope someone benefits from this.
Rgds,
Mounesh.

Just wanted to help techies out there if facing cs service issue.

Lost NSS Pool After Patching

Just ran the latest patches on my OES11SP1 server and one of the NSS pools has disappeared. The lost pool was built on top of a linux RAID5 array and worked with no problems until last night. After patching and restarting the server, the pool was no longer listed via nssmu and the raid is no longer listed under devices - a check of the linux array showed that it is up and stable. I tried to rebuild the pool via nsscon, but it said that it does not exist - any ideas on how can I get the pool up and running again?

Originally Posted by magic31
I'm assuming this is an OES install, installed directly on the hardware (no virtualisation layer)?
You mention the raid is no longer listed... but are the disk devices themselves listed? If not in nssmu, are you seeing them listed in the output of "fdisk -l"?
Along that line... What kind of disk controller(s) do you have in the server? Have you installed any separate drivers for controllers (not included in the SLES install) that might have not loaded with a kernel update?
If you have the option to open an SR alongside getting pointers here, that would be wise imo.
-Willem
This was an install of OES11SP1 directly to the hardware.
The disk themselves show up in nssmu and mdadm sees the array with no errors.
The disk controller is on the motherboard (Adaptec chipset) but did not need any special drivers or config during the install.
What I have seen in the docs is that with OES11SP1, it frowned upon to run NSS on a Linux-software array like I was using. I tried to mount the array using using the mnt command and a file type of "nsspool" but got an error; nsscon says to validate and rebuild the pool, but then comes back and won't let me put it in maintenance mode. I am wondering if I need to delete the old Pool object from NDS, but that won't address the lack of NSS seeing the device...
-L

Authorization problems after patch 6 upgrade and re-install

Hello everybody.
I had a perfect working Visual Composer installation.
After patching it, I got an 401 message, stating that I do not have authorization to view this page:
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.
Uninstalling and reinstalling didn't bring me much further. It seems to be an Internet Explorer and/or IIS 6.0 related problem.
Of course I followed the very valuable note 804996, but the problem remains...
Can anyone help me out?
Thanx.

Hi all.
I resolved my own problem.
Additional to the permission settings as they are explained in note 804996, you must add the Directory Security - Authentication & Access Control, set to Integrated Windows Authentication.
Otherwise Windows NTFS security will block you.
Gr.,
Marc.

Error printing with Windows 7 even after unistalling old and installing new driver

I recently updated to 64-bit Windows 7 and cannot get my HP OfficeJetJ4580 working after the upgrade. I uninstalled all prior printer drivers and ran the recommended software from the HP site to ensure there were no remaining drivers on my system, then installed the updated drivers for use with WIndows 7. The driver isntallation said it was successfula dn that my printer was ready for use.
When I try to print, the job is sent to the print que. The print que immedialtely notes "Error printing" and deletes the job from the que. The printer never responds or tries to print. This happens with anything I try to print, including a test page. No error message is dispalyed on my screen. The only way I can see the error is by opening up the print que and looking at the pending jobs. I went to the HP support center and downloaded and ran the printer diagnostic sofware they had on there. It could not detect any problems with the printer.
I am at a complete loss as to what to try next.

Hello PPN, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are running into installation issues. I would like to help.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I'd recommend putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
After the computer has been put in clean boot mode, I would suggest reinstalling the HP Printer Install Wizard for Windows.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Cannot Print to Windows Printer after Security 2008-002 update

I am unable to print to a Canon image runner 3380 printer on a Windows network after installing Security update 2008-002. Whenever I try to print I get the following error: On Hold Authentication Required. I can click on the Resume button in the print queue and a box pops up to enter my username and password. I've tried entering my user name and password but it does no good. I've also tried reinstalling the printers which also does me no good.
This printer is located on a Windows 2003 server that is setup as a Domain Controler.

I did some searching -- more info: This is apparently due to an upgrade to CUPS, which is the Common Unix Printing System (available to administer directly at: http://localhost:631/ ) This is the way to add a printer if you feel especially geeky.
There is another discussion: http://discussions.apple.com/thread.jspa?messageID=6914585&#6914585
about this, but apparently it is not a resolution, just a description of the problem.
So, I really don't want to deinstall the 2008-002 update, if I can help it. I already installed version 1.1, which did not resolve the issue. I would like to be able to print to my Windows-Active Directory printers without resorting to IP printing. It sounds like this is something Apple has to fix, from the discussions I read. Is this true? And if so, any ideas about how long Apple will take to fix it?

Problem with 10.2.0.5 patch on Windows 2008 Server R2 64bit

Hello
I have HP server with Windows 2008 Server R2 64bit. I installed
latest 64-bit version of Oracle Database 10.2.0.4 and everything works fine and later installed the patch 10.2.0.5 (64 bits) as the Oracle maintains that with the R2 version of the system it is necessary to correct work.
Now, after uploading the patch database starts and closes
after about 15 minutes and my alert log file is changed to the binary version which do not see anything (means that after patch installation (10.2.0.5) the alert log file isn't normal text file and it looks like that:
Źýţ cśy iµ•eű .Ź ťy ťy Ř®y hčN)
You can read only the beginning and it's very large - 13 Mb after unpacking from ZIP.
Can anyone met with this configuration and knows how to solve
problem?
This is the link to my strange alert log file:
http://www.2shared.com/file/22MFap1V/alert_orcl.html
I attached my spfile.ora file too:
http://www.2shared.com/file/gUmID0fh/SPFILEORCL.html

Your alertlog is corrupted, it could be something about a virus or even a problem with disk drives. Have you scanned your server with anti-virus software? Have you scanned the disks?
Last questison: Have you upgraded your database after you installed the patch?
SQL> SHUTDOWN IMMEDIATE
SQL> STARTUP UPGRADE
SQL> SPOOL patch.log
SQL> @ORACLE_BASE\ORACLE_HOME\rdbms\admin\catupgrd.sql
SQL> SPOOL OFFIf not, please read the "readme" file which comes with patchset (do not just run the above commands without reading Oracle documention).
Best Regards,
Gokhan
If this question is answered, please mark appropriate posts as correct/helpful and the thread as closed. Thanks

Problem printing in Windows XP after patch 14

Similar Messages

Maybe you are looking for