Problem printing labels?

Since updating to 10.5 I'm having trouble printing labels from the Address Book. Is there someplace to change the defaults? I couldn't find one for fonts and labels. It always goes back to the default font, size and type of label. I only use one setting and find it very frustrating to keep going back to to change them.

The only spot for changing printing options is in Address Book's Print dialog. You can explore those if you haven't already to see what you can find.

Similar Messages

Problem printing labels on dot-matrix printer

I am currently using Oracle Reports v 3.0 on an NT network. I need to print labels on an Epson LQ-570+ printer. The user will run a number of reports which will create a file for each location we need to send to. The user will then send 10 - 20 files to the printer at a time. The problem I am having is that since we went to Reports 3.0 on NT if a file has only one label, it will print that label then page forward spitting out 10 blank labels. It then prints the next file. We are using continuous feed labels and are wasting a LOT of labels. I have tried to reset the page size in the properties page of the report but no luck. Any help would be greatly appreciated!

hello, I could not write English, but I will help you
You could see it in SYSTEM PARAMETERS of reports, in the MODE option, putting the to initial value Character type
You also have to see the Dflt.prt file, that this located in the C:\ ORAWIN95\ REPORT60\ PRINTERS, the who you control the margins of
impression in manner [caracter]. They for [default] are 80 Columns and 66 Lines, the
who you could publish and change the courages
You count me if I operate you.
Greeting

Problem printing labels and envelopes from Address Book

I am very frustrated by the impossibility, when printing labels or envelopes from Address Book, of including both an individual name and a company name on the label or envelope. The Address book will only print one or the other. When sending correspondence to a person in a large company or building, the correspondence will not get to that person with only the company name or the individual name. It shocks me that in all these years I have been a Mac user, Apple has never noticed and fixed this fundamental problem. I would now like to buy an Ipod or an Ipad, but I am reluctant because I do not want to have to sync my addresses to Apple's juvenile address book. Is there any solution to this?

!http://i46.tinypic.com/2nvn6f.gif!
"It shocks me that in all these years I have been a Mac user, Apple has never noticed and fixed this fundamental problem.
Is there any solution to this?"
Upgrade to Snow Leopard!
Or check out the Mail & Address Book - Tiger Forums & ask if there is a work-a-round.
!http://i50.tinypic.com/izvwo1.gif!

Problem Printing Labels on Zebra label printers

Hi Every one
(there may be old solution for my problem, if there is, point me
to that)
my environment is oracle 6, windows 2000. server is runnig on
windows NT.
I am generating labels using oracle reports 6 for an application
customised for pharmaceutical company. report has driver report
calls another label generator report. no matter from where i
print the report to zebra S400 label printer, my report builder
crashes. if i run the report from rep file in application, my
application crashes. if i save the report to a pdf file and
print it using acrobat reader, it prints perfectly. if i use any
other application like access, vb etc. they generate label and
print without any problems.
i have the latest windows 2k drivers for the printer. i also
have tried re-install oracle cleint on my pc. the result is
same. applications crash when print using oracle report to label
printer?
has any one come across such a problem? is there a solution for
it?
zebra label printers are pretty much a standard and are being
used in allmost all the client location that my deals with. and
they (printers) number in 1000's. in most of the cases labels
are generated using zpl language in ascii, but why cant oracle
reports print report generated labels to these printers?
zebra has no comments on this, but they demonstrate their
printer capabilities using all other windows based applications
and point back to oracle reports for the problem.
i appreciate any solution, lead, tip to overcome this problem.
thanks and regards
shiv(anand)
dcss, houston

hello,
i would strongly suggest, you consult the metalink knwoledge
base and seach for existing problems. if you can not find
anything, contact oracle support services.
regards,
the oracle reports team --pw

Problems printing labels and envelopes with related names

When I try and print out labels for Christmas cards from Address Book, the program creates the first line of the label with the name on the Address Book "card", plus the names of the "Related Name" entries on the card. This works for most cards except in the following situation.
The Related Name field (Spouse, Child, etc.) does a 'fuzzy lookup' to match other cards in the Address Book database. If there is another card with the same name as one of the related names, the address is checked to see if the address matches. If it matches (or if there is no card that matches the related name), Address Book will include the related name on address labels. (Address information is required for this test since Address Book will not print a label for a card that does not have and address.) This was the source of my first problem as I had a card for a related name that had an old address on it, so Address Book chose not to print that related name on the labels as they did not live at the same address. I agree with this logic.
The real problem is revealed when you add a related name to a card in which the first name of the related name matches the first name of another card which is NOT the same person. So I have a card for "John Hart", and on that card I have two relate names, a Spouse of "Nancy Hart" and a Child of "Eric Hart". I also have a card for "Nancy Hart" with a Spouse of "John Hart" and a child of "Eric Hart" and the address matches that on the card of "John Hart". If I print a label for "John Hart", Address Book properly prints "John, Nancy and Eric Hart". Now if I add a card for "Eric Smith" and either have a different address or no address at all on that card, when I print a label for "John Hart" Address Book will print "John and Nancy Hart", effectively losing the child. I can only think that Apple made the search for related cards TOO FUZZY and forgot to include the last name in the search.
Apple... are you out there? Please help!!!
PS: My full database has many records that are incurring this problem, and it's annoying.
PowerMac G5 Dual 2.5 Mac OS X (10.4.3)

After going through 3 2nd level support personnel, I finally reached one who cared enough to actually type in what I asked him to, and then to research the findings.
As I pointed out above, Address Book compares the related names with the other cards in the database. If there is no card for the specific related name, Address Book will stop at a record with a matching first name and then compare addresses. If the addresses do not match, it will not print the related name. The support rep stated that hopefully in future version this might be refined.
AS A WORKAROUND, he suggested I create cards for any of the related names on my cards. Once this is done, and the cards have matching addresses, all of the related names on the selected card for label or envelope printing are printed.

Issue with Printing Labels using PrintToPrinter

Hi,
Recently we have upgraded our reports from crystal reports XI to crystal report 2008.
We are currently facing problems with the labels printed through crystal reports.
I've used the ReportDocument.PrintToPrinter(1, false, 0, 0); method to print the report directly to the label printer.
The problem is, if I export the label to a PDF file and print the report by selecting the printer the label comes out perfectly, but when I print the report directly using "printtoprinter" method instead of exporting it to a PDF, the font size is reduced and the label looks like its shrinked to half the size. Our production server is still running on crystal reports XI and we don't have any problem printing labels from it. Let me know if i'm not sailing in the right direction.
System Details:
OS: Windows Vista Buisness 64-bit
Visual studio 2008
.NET Framework 3.5
Label Printer: Dymo Labelwriter 330
Crystal Reports 2008
Code:
private ReportDocument oRpt = new ReportDocument();
// initialize the repot.
initReport();
oRpt.PrintOptions.PaperOrientation = PaperOrientation.Landscape;
oRpt.PrintOptions.PrinterName = prnName;
oRpt.PrintToPrinter(1, false, 0, 0);
Thank you,
Vijay

Hey Josh,
I'm sorry there was a typo in the link.
Here is the link for that forum Re: Custom Paper Size & Orientation Problem
The solution mentioned by Amit singh in the thread solved my problem. I'm pasting the code here for you to look at.
boReportDocument.Load(Server.MapPath("CrystalReport.rpt"));
        PrintOptions boPrintOptions = boReportDocument.PrintOptions;
        // The paper size used for this report is '14x7'.
      System.Drawing.Printing.PrinterSettings oPrinterSettings = new       System.Drawing.Printing.PrinterSettings();
        oPrinterSettings.PrinterName = "     ";
        foreach (System.Drawing.Printing.PaperSize oPaperSize in oPrinterSettings.PaperSizes)
            if ("14x7" == oPaperSize.PaperName)
                boPrintOptions.PaperSize = (CrystalDecisions.Shared.PaperSize) oPaperSize.RawKind;
                break;
        CrystalReportViewer1.ReportSource = boReportDocument;
Hope this solves your problem.
Vijay

Printing Problem with labels and envelopes

I have Microsoft office:mc 2004 and cannot print labels and envelopes. Whenever I ask to print it boots out and states that there is a problem and ask me to report the problem. I have reported it 20 times in the last 2 days with no response from apple. Can anyone give me any input on how to correct this problem? I have a HP laserJet 3050 all in one printer and did not have these problems when I was using a PC with windows. Please help as I am at my last of my patience on this problem. Thanks and please use language I can understand as I am not computer literate on all of the lingo that is being used.

Hi Lilmac, and a warm welcome to the forums!
Have you installed a Printer Driver later than the one that comes on the CD? hp generally includes older ones.
Tough to say with so little to go on, but since it could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
5. Select your Mac OS X volume.
6. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot.
The usual reason why updates fail or mess things up, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
Some people get away without Repairing Permissions for years, some for only days.
If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates.

Problems printing international shipping labels in PayPal since updating to iOS 7

Problems printing international shipping labels in PayPal since updating to iOS 7. When I press the reprint label button, another tab opens up, which it did in the previous version but instead of the shipping label bring displayed I get a message saying cannot open page as the network connection has been lost. By this point I have already been charged for the shipping. Any ideas why???

I have the same problem, not just with international labels, but with any shipping labels in Paypal. iPhone 5 and iPad w/ Retina Display using iOS 7.0.2.

I am trying to print labels from my address book, and when I change it to have the first names first, only some names work. Does anyone know what the problem is or how to fix it?

I want to print labels from my address book, but when I try to put first names first, only some will work. Does anyone know why this is happening and how to fix it?

Hi MollyPhloot07,
I'm glad you found the coupons.com app and you might also want to take a look at the GroceryIQ app from the same company. Please note that at this time, printing is only support from iPad to HP wireless inkjet printer. That's most likely the reason why your Canon isn't displaying when attempting to print. The other way to go might be emailing the coupons you want to your email address, then open that email and print from a conventional desktop or laptop computer.
Hope this helps!
Coupon Support

Canon image runner advanced C2030/C20 ,printing labels problems

Question is for Canon image runner advanced C2030/C20 ,printing labels from Filemaker pro 10
1)how & where do you turn off the double sided printing?
2it )will only print the first 30 pages in a range,how do I increase this

goldn:
Welcome to the Apple Discussions. Just ran a test and I got a perfect card. Here's what I did.
1 - create the card and type Command-P.
2 - select Stylus Photo R200 under Printer
3 - click on the Advanced button
4 - in the bottom drop down menu select Paper Handling
5 - select the radio button "Use documents paper size: 7.00 in x 10.00 in
6 - now select Print Settings in the 3rd drop down menu
7 - select the type of paper you're using and the print quality you want. I used Photo and High Speed. (also used plain paper for my test)
9 - put a piece of 7 x 10 paper in the printer (yes, you'll have to trip the paper beforehand or use card stock designed for this)
10 - click on Print
11 - when the paper exits the printer quickly put it back in the printer
That will do it. Now there is a caveat. Putting it back into the printer before drying tended to get my leading edge nipped. If you use heaver card stock I don't think that will happen but just be aware. If you wait a moment to put the page, turned over, back into the printer to let the ink dry a bit, all you'll have to do is press the middle button which will be blinking red and that will feed the other side thru when you're ready.

Have problem in label printing program while printing continuously

Dear Gurus,
   i am working on a label Printing program. my requirement is that to print label as below in one page continuously :
     Label 1      Label 2
     Label 3      Label 4
     Label 5      label 6
but i am unable to do , please tell me how to do this . i v already did like this:
     Label 1      Label 1
     Label 2      Label 2
     Label 3     label 3
please reply.

Imagine you have a list (itab1) with one field only (matnr). To achieve what you need, you must create an itab2, with 2 fields (matnr1 and matnr2).
In your print program do something like:
DATA: l_mod TYPE i,
      l_line TYPE i.
CLEAR: l_mod, l_line.
LOOP AT itab1 INTO wa1.
ADD 1 TO l_line.
l_mod = l_line MOD 2.
IF l_mod NE 0. "position1
    wa2-matnr1 = wa1-matnr.
ELSE. "position2
    wa2-matnr2 = wa1-matnr.
    APPEND wa2 TO itab2.
    CLEAR wa2.
ENDIF.
ENDLOOP.
Verify is this code should predict some exceptions (last line or something).
Edit: last line:
ENDLOOP.
IF l_mod NE 0. "position1 was not appended
APPEND wa2 TO itab2.
ENDIF.
Regards.
Valter Oliveira.
Edited by: Valter Oliveira on Sep 11, 2008 1:08 PM

When printing labels for each printed label a blank label comes out of the printer

Hello Experts
We have a CR report which is designed to prints labels for the items using a label printer. After an upgrade that we have last month the settings for this report are missing so the labels were coming out wrong.
Due to this I have had to reconfigure this report and its printing preferences and so far I have managed to make the prints fit in each label. But the problem is that if I try to print 5 copies of a label, the 5 labels come out of the printer just fine, butt after it another 5 blank labels come out of the printer too.
I have tried with all parameters in "Printing preferences", mainly in the "Material" tab but nothing works.
Thanks in advance and regards

Hi,
Please check below SAP note and let me know your feedback:
1043235 - Label/thermal printers are not supported by SAP Business
One
Thanks & Regards,
Nagarajan

HP Officejet Pro 8500 A909g Series capable of printing labels on the CD?

I have Sure Thing label software that can print label information on a printable CD if the printer has the capability. Not able to find any HP doc confirming whether it does or does not. Anyone know for sure? Thx.

Hi,
No, it can NOT print on printable CD/DVD's:
http://h10010.www1.hp.com/wwpc/ca/en/sm/WF06b/18972-18972-238444-3328086-3328086-3752454-3752460.htm...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MIGO Print label WEE1 for non stock items from GR for PO

Hi,
I added logic to print new label into printing program MZ07DETI which is printing labels for stock items. My label is for non stock items. The problem is that for non stock items printing process is not triggered. I created PO with Account Assign. Category F, P or K no material number and no storage location. For this type of PO no print possible during GR posting. Is any set up available in IMG to make it work. I appreciate any response.

Hi,
Please check up if there is any default value at the plant level;in case of such default,the system will post to the GL Account defaulted,not with standing the "standard item category".Better checkup if any cost center /order has been assigned.
The GL item is defaulted thro'the item category.If both the goods and services have been defaulted to the same GL Account,then not with standing the type [ie] whether goods or services,the system will post tot he same GL Acct.
Hope this helps.
Regards.
Ramesh

Has anyone had a problem centering labels from microsoft word 2007 using the hp photosmart 7510? my

Has anyone had a problem with printing labels centered on HP Photosmart 7510 e-All in one? My labels are printed from Word 2007 and appear on the screen to be centered, however when I print, they are too high on the label. Also when printing an e-mail the bottom of the page where it lists your email name is cut off. Please help!!

Hi,
I'd been having this problem for probably round 30 years on many printers. I bought a labels printer few years back but I don't print labels everyday now.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Problem printing labels?

Similar Messages

Maybe you are looking for