Problem printing my time range

I'm trying to print my iCal weekly view for the range of 10am to 8pm, but when I print it prints the whole day (12am to 10pm!). In the prefs I have "day starts" and "day ends" to the proper times. And if I set view to "Day" it prints the right range. Any reason it would be doing this, or does anyone know of a workaround so I can print just the time range I want?
Thanks,
Tony
Power Mac G5 Mac OS X (10.4.9)

I don't see any problems with your permissions.. it is showing read and write for everyone.
But the TC trash works differently.. and can cause issues.. all of this is the reason you should not be using the TC as a NAS..
See E6 here about emptying trash..
http://pondini.org/TM/Troubleshooting.html
Also your TC name is too long.
See C9 for why you should keep you name shorter..
In fact under Mavericks.. I would stick to SMB standard .. 2-20 characters.. less than 10 even better.
No spaces
Pure alphanumeric.
Much pain when Mavericks is involved.
Pondini also has some instructions on better way to use the TC if you do want to mix data and TM backups.
Q3 here.
http://pondini.org/TM/Time_Capsule.html
Remember also if you move this data to the TC it cannot be backed up by Time Machine in the computer.. and you will have no backup of your files.

Similar Messages

History - recent history -time range not showing

Hi i have a problem with clearing my recent history.
The problem is my time range to clear is buged and not showing.
I tried with reinstalling firefox and clearing all settings but it didn't help.
So i decided to write here for some help.
Thanks

I've installed the Bulgarian Firefox version and I see the same small Clear Recent History window.
The DOM Inspector shows a width of 14em and that is really too small compared to what I get with the en-US version (width: 34em).
Add code to the userChrome.css file below the default @namespace line to increase the default width.
*http://kb.mozillazine.org/userChrome.css
The customization files userChrome.css (user interface) and userContent.css (websites) are located in the chrome folder in the Firefox profile folder.
*http://kb.mozillazine.org/Editing_configuration
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#SanitizeDialog {width: 34em !important;}</nowiki></pre>
See:
*view-source:chrome://browser/locale/sanitize.dtd
Sounds that something got wrong here and maybe a bug should be filed:
<pre><nowiki>
<!ENTITY dialog.width2 "14em"> (shouldn't this be at least 28em ?)
<!ENTITY column.width2 "14em"></nowiki></pre>
The sanitize.dtd in the en-US locale:
<pre><nowiki>
<!ENTITY dialog.width2 "34em">
<!ENTITY column.width2 "17em"></nowiki></pre>

Printing time range month view

This is driving me crazy. All I want to do is print the start time and the end time in month view. The problem is that I only get a start time for the event. Or if I try to enter the time in the even manually I get a time and a time range. The only way i found that works is to check the all day box then enter the time range manually in the event (3:00-5:00). When I print it works, but it screws up the snyc to my pda, and the list view. Any ideas?

I don't know whether this a "solution" or a work-around, but I did find a way to resolve this problem. I recently started using iCal by transferring appointments from a BlackBerry using the BlackBerry PocketMac software. Although all of the appointment times appeared on the monthly calendar, most of the appointment times were replaced by ellipses when the monthly calendar was printed. It turns out that the times would print only after re-entering the appointment manually. This had to be done completely from scratch, i.e., not by editing the original appointment, or by cutting and pasting the appointment back into the calendar. This is a complete pain, but seems to work. I'd love to hear a better solution...

Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print?

Anyone else have a problem printing from an iMac OS-X 10.9.3 to a wireless Epson 835 Artisan printer? Sometimes it prints but must often I get "The printer is not connected" and I have to retry printing 8, 10 or 12 times before it will print? I have followed all the instructions from Epson about upgrading, etc. but it is very frustrating when I have to repeatedly try to print. Epson says talk to Apple???

Try checking thru these, maybe some help.
Mac OS X: How to reset the printing system
http://www.macworld.com/article/2029528/mac-troubleshooting-what-to-do-when-you- cant-print.html
Also try deleting the printer from your printer Q system preferences, then reinstalling it (highlight the printer click the minus symbol, then click the plus symbol and add it again. Reboot, and try.

I still have a problem clearing history and i did select time range to Everything

I still have a problem clearing history and i did select time range to "Everything". I tested using Internet explorer and I could clear the history there so its not a problem with the Xp secondary account. I even disabled the add ons in firefox and still get the same issue

sorry, scratch this, the first post did enable me to find a solution, it was the signon.sqlite file that had become corrupted.
As an interesting aside, this has also fixed the problem with using Xmarksspace which was giving me an "error 3" synchronising problem.
Apologies for the tone of my previous posting, you did provide the information that enabled me to find a solution, thank you and sorry.
Regards
Crashhot

Print different page ranges of a document without, each time, having a print dialog?

Hello,
Would need your valuable help on that one.
I have a large PDF File, of which I want to print different page ranges, based on the checkboxes that have been checked by the User.
Ideally, clicking a "print" button would generate the page ranges, based on the checkboxes that are checked and open one print dialog with the pages ranges already indicated in it. Like this, the User can enter once the printer settings (e.g. booklet or duplex) he wishes, which should then be valid for all the pages contained in all the page ranges.
Thank you in advance for any tip!
Cheers
Serge

PrintParams.constants.flagValues.duplexTypes.DontCare
PrintParams.constants.flagValues.duplexTypes.Simplex
PrintParams.constants.flagValues.duplexTypes.DuplexFlipLongEdge
PrintParams.constants.flagValues.duplexTypes.DuplexFlipShortEdge

Print each page range double sided as new task

Hi All,
I have that problem. I would like to double sided print some pages from pdf file - let's say pages 1 to 5. But I want them to print like this - pages 1-2 on the first sheet of paper, page 3 on the second sheet (the other side of this sheet I want to be blank) and pages 4-5 on the third sheet.
If I type page ranges 1-3,4-5 when printing the result will be the same if I would type page range 1-5, so pages 1-2 will print on first sheet, pages 3-4 on the second sheet and page 5 on the third sheet. That's not what I want.
The only solution is to first print pages 1-3 and then open printing dialog box again and print pages 4-5 so they would be two separate tasks for printer. But this is very time consuming when working with large files.
I do not have Adobe Acrobat to insert blank page after each section that is odd numbered so this is no solution for me.
Could you please help? Any ideas how to work this out? Is there any printing set up to print each page range as separate task?
Or maybe there is a way to double sided print odd numbered page ranges with an additional blank page at the end so that the next range would start on new sheet?
Thank you in adavnce

dear ,
check ur printer settings , bcos u are using std.program , so i cannt say SAP is doing wrong , better to check ur printer settings
Regards
prabhu

Can't get printouts with Time Range I select

I've had this problem since Leopard, and since I'm still having it all these years later in Mountain Lion, I figure I must be doing something wrong, and it can't have been an unfixed bug all this time. I'm trying to print a week view that doesn't begin on Sunday. (E.g., right now I'm trying to print a week that starts today, Friday, and ends next Thursday, which would be Oct. 26-Nov. 1.) I select the Time Range I want in the Print window, but the software always ignores the dates I've entered and prints the week beginning the previous Sunday anyway (Oct. 21-27).
I've grown tired of crossing out the printouts and hand writing in the correct dates myself, so is there something I'm missing to get the Time Range feature to work? Thank you.

I've had this problem since Leopard, and since I'm still having it all these years later in Mountain Lion, I figure I must be doing something wrong, and it can't have been an unfixed bug all this time. I'm trying to print a week view that doesn't begin on Sunday. (E.g., right now I'm trying to print a week that starts today, Friday, and ends next Thursday, which would be Oct. 26-Nov. 1.) I select the Time Range I want in the Print window, but the software always ignores the dates I've entered and prints the week beginning the previous Sunday anyway (Oct. 21-27).
I've grown tired of crossing out the printouts and hand writing in the correct dates myself, so is there something I'm missing to get the Time Range feature to work? Thank you.

Problem printing out to a parallelport printer

Hello, I am using the javax.comm.*; package and I am having problems
printing to the parallelport.
Well, it prints out the string but the problem is that the light for paper feed
starts blinking eventhough there is paper , once I click the paper feed button
the printer then prints out the string.
So, basically, everything is ok, apart from that I have to press the paper feed
button for each time I want to print something.
There is an error in my code somewhere, but as I am new to port communications I cannot understand what to do.
Below is my code, please help.
Thanks!
public void print(String s){
Enumeration ports;
CommPortIdentifier portId;
     try{
          portId = CommPortIdentifier.getPortIdentifier("LPT1");
         addPort(portId,s);
     }catch (NoSuchPortException e){
                 e.printStackTrace();
public static void addPort(CommPortIdentifier portId,String s){
     try{
          ParallelPort port = (ParallelPort)portId.open("LPT1",2000);
        /*port.notifyOnError(true);
        port.notifyOnBuffer(true);
        port.addEventListener(new ParallelPortEventListener(){
               public void parallelEvent(ParallelPortEvent ppe){
                       System.out.println(ppe.toString());
                       System.out.println("An event has occured");
          try{
               OutputStream os = port.getOutputStream();
               if(os == null){
                    System.out.println("Os is null");
               else{
                      os.write(s.getBytes());
               //os.flush();
          catch(Exception eis){
               eis.printStackTrace();
          port.close();
     catch(PortInUseException e){
          System.out.println(e.currentOwner);
          e.printStackTrace();
     catch(Exception ecl){
          ecl.printStackTrace();
}Of course this class imports :
import java.util.Enumeration;
import javax.comm.*;
import javax.comm.CommPort;
import javax.comm.CommPortIdentifier;
import javax.comm.ParallelPort;
import javax.comm.NoSuchPortException;
import javax.comm.PortInUseException;
import java.io.*;

Wow - I wonder how the OP thought that the
Developers Home > Developer Forums > Java Forums >
Java Mobility Forums > Consumer and Commerce >Consumer and Commerce General >
Forum was a correct choice for this problem??It's the same logic that leads one to believe that being new to port communications omits them from the responsibility of using general troubleshooting techniques to isolate/identify a problem.
This logic often leads to obscure questions also, sadly.

Possible solution for problems printing with ICC profiles - esp. R2400

(N.B. This is long because I've decided to go in to details about the background of the problem etc.. Also note that whilst my experience is with the Epson R2400, anyone with problems printing using ICC profiles in Aperture may find this post helpful, as will be explained further down the post.)
Ok, here's the situation. I've been an Aperture user for over a year, and an R2400 owner for half a year. In that time I have done a huge amount of experimenting, but I've never managed to get Aperture to work perfectly with Epson's 'premium' R2400 ICC profiles - the ones you can download from their site which are better than the ones provided 'in the box'. This hasn't been too big a deal because, in fact, the R2400 does a rather good job just set to 'System Managed' in Aperture and 'Epson Vivid' with a gamma of 1.8 in the printer driver. Nevertheless, it really annoyed me that something that should work wasn't, which is why I've spent a lot of time trying to figure out what's going on. Having said that, I have come across a method which will give you pretty good prints out of your Epson R2400 using the premium profiles in Aperture - it's not perfect, but it's the best you're going to get if you want to use those profiles in Aperture. I understand the words 'it's not perfect' aren't what photography experts would probably want to hear, however, I have seen a few anguished posts from R2400 owners in here before, so I think some people may find it useful.
The whole reason why Aperture is hopeless at using the R2400's premium profiles is because - unusually - their default rendering intent is set to 'relative colorimetric' rather than 'perceptual'. You might say 'but that's good - it means you get more accurate colours!', and if you do, you're right... however, there's a snag. To get an image to reproduce well using Epson's premium profiles and relative colorimetric rendering, you really need to use black point compensation. This is where the trouble lies: Aperture's black point compensation is diabolical to the point of being unusable when used with relative colorimetric rendering - I feel I need to be awarded compensation every time I've ever tempted to use the setting. So because BPC in Aperture is unusable, that effectively makes the premium profiles unusable too, because Aperture always uses the default rendering intent specified in the profile.
The solution? Use perceptual rendering instead. Ok, so you can't change the rendering intent in Aperture, which makes that sound a tad difficult. However, as I said in the above paragraph, Aperture always obeys the default rendering intent specified in the profile... so you can see where we're going with this: we need to change the ICC profiles' default rendering intent from 'relative colorimetric' to 'perceptual'. I did some digging around and found one or two expensive pieces of software that could do that... but then I found that, lo and behold, the Mac OS has a command-line utility which can do the job for us, for precisely £0.00. It's called SIPS or 'Scriptable Image Processing System', and you can find out some information about it here: http://developer.apple.com/technotes/tn/tn2035.html#TNTAG58 For those who don't like reading technical jargon however, here's what you need to do to convert a profile's rendering intent. First go to terminal, then type in the following command:
sips -s renderingIntent perceptual
Do not press 'enter' yet. Instead, add a space after 'perceptual', find the ICC profile you want to modify, and click and drag it into the terminal window. You should then find that your command looks something like this:
sips -s renderingIntent perceptual /Users/yourname/folder/RandomProfile.ICC
At which point you can then press 'enter', and the command will execute, giving you an ICC profile which will now make Aperture use perceptual rendering.
There is just one further thing to be aware of after doing this: for some crazy reason, you then need to turn on BPC in Aperture for the prints to come out as good as possible. Black point compensation shouldn't make any difference when using perceptual rendering as the idea of perceptual is that it takes account of things like that anyway, however, in Aperture BPC does make a difference, so remember to turn it on to get a half decent print. In general, I find that prints made using this setup come out pretty well; they almost perfectly match prints made using the profiles with a perceptual intent in Photoshop Elements, except for the fact that Aperture blocks up the shadows a bit more than Photoshop. However, if you can live with that, you might find this is quite a workable solution.
Now, I said near the beginning of this post that all the above can apply to other printers too. Most printer profiles have 'perceptual' set as their default rendering intent, in which case everything I've just said won't be of much help. However, If you are reading this because you're having problems with ICC profiles in Aperture, but you don't use an Epson R2400, find your problematic ICC profile, double-click on it, and take a look at the window that opens: specifically, at the 'Rendering Intent' the window mentions. If it doesn't say 'Perceptual' then it may well be worth trying the steps I've outlined in this post to set it to perceptual, to see if doing so produces an improvement when using the profile in Aperture.
Finally, just one note of caution: if you decide to try out the steps I've detailed above on a paid-for custom-made profile, please back your profile up before messing with it. I haven't experienced any problems when using SIPS to change a profile's rendering intent, but I obviously can't guarantee that it won't do something weird and corrupt your expensive custom-made profile.
If you have any questions, feel free to ask, although (contrary to any impression I may give) I am not a colour-management expert; I'm just someone who doesn't give up when they have a problem that should be solvable.
Thomas
Mac Pro 2.0GHz with 30" ACD; 15" MacBook Pro 2.0GHz Mac OS X (10.4.10)

Thomas
Wow - thanks for such a comprehensive post.
I have Aperture and a 2400 so this information is exceptionally useful to me.
Again - thanks for caring and sharing
Brian

How do i filter the records in analytic view by using variable/parameter for a time range

i have a analytic view which has a output column as date type. i want the user who use this view have the control to decided the output records based on a time range (from x to y).
i tried to create 2 variables, 1 for start_time, 1 for end_time. Ideally, i should have a expression for filtering data like this:
$$start_time <= date_column <= $$end_time
However, the variable windows doesn't seem to be feasible for the expression as above.
Does anyone has the same problem and get it solved?
Thanks!

just figured out by my own. So the answer is using "variable" with "range" option.
Making a variable, then set the "selection type" to "range".
When preview the data, the variable input window pops up with operator on default "equal", use dropdown list to swtich it to "between", then you can enter the start_time and end_time as a range filter.

Problem printing Report with Image in BI Publisher 11g

I am working with BI publisher *11g* but I have problem printing images. Everything works fine if I do not include any images however when I add a image I get following problems.
When I tried printing PDF in output I get
Type /Xobject
subtype /Image
Filter /DTDDecode .......
When I tried printing HTML output I get
Type /Xobject
<html...
....>
When I tried printing RTF I get
{ \fontb1 }
{ \f0 Arial;}
{ \f1 Times:}
I think I am missing some BI publisher configuration. Can you help me in this regard.
Thanks,
Santosh
Edited by: user4956795 on Jan 16, 2012 2:08 PM
Edited by: user4956795 on Jan 16, 2012 2:18 PM

Isn't there a way for you to do this via a Package/Procedure versus having multiple queries?
Per the BI Publisher guide,
Following are recommended guidelines for building data models:
Reduce the number of data sets or queries in your data model as much as possible. In general, the fewer data sets and queries you have, the faster your data model will run. While multiquery data models are often easier to understand, single-query data models tend to execute more quickly. It is important to understand that in parent-child queries, for every parent, the child query is executed.
You should only use multiquery data models in the following scenarios:
To perform functions that the query type, such as a SQL query, does not support directly.
To support complex views (for example, distributed queries or GROUP BY queries).
To simulate a view when you do not have or want to use a view.
Thanks,
Bipuser

Problem print all pages on my HP Laserjet 1320 from my Mac

I am having a strange printing problem.
Happens in almost any program (Mail / Excel /Preview/Word/TextEdit/etc.). I can ask it to print a one page document. It spools, the printer flashes. The computer said it is done but nothing printed. On the same document, if I tell it to print 2 copies of the one page document, it will print one page sometimes and two pages other times. When printing long multipage documents it will sometimes not print the last page. It is almost as if the needs to be something at the end of the print job to push the last bit along to the printer and complete the print job. It only started happening 3-4 months ago. Now I have to check everything I print to make sure it is all there. This printer is connected to my Mac Mini via USB.
If I send the same print jobs to the company network printer....everything prints fine. (Kyocera - copier/printer/scanner/fax combo unit)
Here is some info on My system.
Mac Mini 2.3 GHZ i5 / 4GB memory
OS X 10.9.5
Printer is HP Laserjet 1320
I have deleted and reinstalled the printer several times and no joy.

I've also had problems with the HP 1320 and my Mac. Some things print, while others just give a blinking green light and then it goes off. This recently happened to me while trying to print a series of labels from Word. Giving up on the HP, I decided to print the labels off my inkjet printer and placed a number a labels in the printer and hit print for 100 copies. Since I had being doing some other things in-between, I didn't notice that the print select had also gone to my default printer the HP. Suddenly, thinking the inkjet was to print the labels, the HP starts printing those labels. I then noticed that the HP was the printer selected, but I was at a loss to figure out why it suddenly had started to actually print the item that I was previously unable to do. I finally determined that when I tried printing to the HP with the initial (1) copy it would not print; if I changed that number to (2) it would print one copy; if (3) I would get 2 copies; thus the print was giving exactly one less copy than I selected; thus when I select (1) copy it reads it as 0, will blink green and give me nothing. Give it a try.

Quality problem printing in Windows 8.1 with CP1215

Recently purchased new laptop with Windows 8.1 Pro. I have had my printer for years, CP1215, via USB, without having any problems printing to it with Windows 7 Pro. I first noticed that the quality of print I receive out of my printer on the new laptop is darker. The darkness comes from black lines going diagonally across the page. I would estimate at approximately a 2 degree angle. I would also estimate that the lines appear every 4th pixel row. I have attached 2 images, printed on 2 different printers. The one on the top is the one off of my CP1215, the one on the bottom is a color copier in my office. I have zoomed in incredibly on the prints to show the lines. Just never had problems with this printer in pre Windows 8.1 days. Tried installing ljcP1215-HB-pnp-win64-en. Tried uninstalling printer, rebooting, then installing, still same problem. I also have another problem with printing, but suspect it is more of a Microsoft problem. My laptop thinks a network printer goes offline, stopping and restarting the print spooler service seems to fix that. I had to make a .bat file on my desktop to do it, it happens at least 2 times in an 8 hr work day.

Hi paulie99, Welcome to the HP Forums, I hope you enjoy your experience! I understand the printer isn't printing properly from Windows 8.I will be happy to help you. Check your printer driver settings. 1. On the File menu in the software program, click Print.2. Select the driver, and then click Properties or Preferences.3. Click the Paper/Quality tab.4. In the Type is or Size is list box, select the correct media type or size. Set the quality to ImageREt 2400. I have provided a document to install the Windows print driver to see if that makes a difference.Installing the Printer Software in Windows 8.1 for a USB or Network Connection. For the network printer I would setup a static IP address. Please let me know the results if you are still having issues. Thank you for posting on the HP Forums.Have a great weekend!

HT4356 I checked everything out and had no problem printing from IPAD/MINI using the HP Photosmart 6520 printer, but the next day, using same application, my HP did not show, but was looking for the AirPrint Printer, what am I doing wrong?

Using IPAD2, IPAD MINi, HP photosmartE6520 set up on wireless network. No problem printing from my devices, but the following day, it is looking for AirPrint printer, why?

Hello lenc48,
Welcome to the HP Forums.
I see that you are having a few issues when it comes to printing from your mac as well as some two sided printing issues.
I do have a some suggestions that we can try in the attempt to troubleshoot this issue.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable (if using wireless, disregard this step) from the printer and from the Mac and leave it disconnected until further notice.
Please click on the first link that will give you instructions on Uninstalling the Printer Software.
Once the software has been removed, please disable any anti virus protection that you may have on the Mac.
The next step we are going to take is downloading the HP Photosmart 6520 e-All-in-One Printer Full Feature Software and Drivers - OS X 10.9 Mavericks.
The installation will prompt you when to connect the usb cable (You will see a prompt for a wireless connection as well if that is the connection type you would like to use) so please do not connect the cable until prompted to do so.
If you are still having issues, feel free to write me back or you can contact HP Total care direct. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Problem printing my time range

Similar Messages

Maybe you are looking for