Problem printing Report Document Draft

Dear support,
our customer has problem printing its Document Draft Report, because
the "DRAFT DOCUMENT" string on the background of the page is too large.
The printer can manage this dimension and prints an empty second page
(also when the document has more pages).
See attached file.
If we disable the "Print Draft Watermark on Draft Document" flag in the
Print Preferences, the customer hasn't the problem printing the draft
document.
The customer need to distinguish the print of draft document.
Is it possible in the report designer to know if a document is a Draft or
a Definitive one?
If we can understand the type of the document, we could add a text box
"DRAFT DOCUMENT" in the report and disable the "Print Draft Watermark on
Draft Document" flag.
Can someone help us, please?
Regards,
Emanuele
TC Systems SA - Mendrisio - CH
Emanuele Croci
+41 (0)91 960 2525

hi Emanuele Croci,
For example paper format which default as Letter,but in PLD
if y'r paper format is A4 then definitely it will be printed more than 1 page.
Go to File --> Page Set Up --> Change paper format as in PLD.
Also reduce the font by 1 point.
If problem not get solved,You can print Water mark as DRAFT from printer properties.
Start --> Printer and Faxes > Select Printer you want to print,Right Click it>Select Properties>Select Printing Preferences>Select Effects Tab> Select Water mark option as Draft>Click Apply.
Test print it let me know.
Hope above solution will solve problem.
Jeyakanthan

Similar Messages

Problem printing report

I have a small problem printing reports which exist of 1 page.
1st report is printed OK
2nd one is bad
3rd one is bad
4rd one is bad
5th is OK again... and so further.
When I choose a different printer, all prints are OK. When I print from another PC on the same printer, all prints are OK.
I assume some settings are disturbing the prints; can anyone suggest where I should take a look?

are you using a dot matrix printer or a laser printer?

Problems printing word documents

Hello
My friend as a powerbook and a HP printer, and is having problems printing word documents, nothing shows up in preview when you press print just a blank page pops out. You can print pictures fine from iPhoto, any ideas?
Popping over tomorrow to see if I can get it working. My friend emailed a document and I had no trouble printing it.
Paul.

Hello MaradaMMA,
Welcome to the forum.
Can't test at the moment, but, if after clicking the print
button, in the option tab, can you select "as laid out on screen",
then click Print?
Hope this works, if not, please post back
Regards,
Brian

Problem with printing report document issue

hi i want to implement "Print all" button functionality in my simple school management software where the
report printing of whole students of same class can be done with a single "print all" button function.
how can i implement this? i am lacking logic and skill here. please help.
thanks

its the simple student management system where the teacher will input the marks of the students in particular subjects and store it in the database. now i have to print that on the report card. printing report as per student might be troublesome so i want to implement the " print all" button where the report card of all the students in that class will be printed in the report cards. its: printer printing the report of a student in the paper (A4 size) and then printer takes another paper sheet and then print the report of another student of same class until finish. how to accomplish this task?

Problem - printing billing document

Hi experts,
when printing billing document,some billing document is printing and some one is not printing based on condition type for billing document.
one billing document have one or many condtion types.
based on condtion type the billing document is printing.
i saw inside the program i found one function 'RV_PRICE_PRINT_ITEM'.
COULD YOU PLEASE explain functonality of above F.M
this is very urgent.
Thanks in advance for right solution.
Regards
jai

Hi,
Already i maintained the condtion type in customzing.some records picking right one some one is not picking right one. see my problem.
for MWST contion type, the document to be printed.
good document: have condtion types XXXX,MWST,YYYY.
wrong document: have condtion types xxxx,YYYY,MWST.
The f.m selecting MWST for right document and YYYY selected for wrong document.
what is extracltly functonality of RV_PRICE_PRINT_ITEM f.M
WAITING FOR REPLY.
Regards
jai

Problems printing small documents

Hi everyone,
I am a digital printer and I am running into an odd problem printing document that are smaller than 8.5 by 11. Typically I don't print from Acrobat. I usually just import directly into Command work station and then print from Fiery. However every so often I need to "print as image" to make sure the document prints as it should. I create a custom page size and make sure to choose the correct printer to format for. When I view it in my rip software the document reads as 8.5 by 11. So for example I can send business cards over at 2.25 by 3.75 and use the custom page size that matches but it still comes over as business card placed on a 8.5 by a 11 page. Does any one know how to remedy this? I am using Acrobat XI on a Mac running OS 10.9.3. I use Command Workstation 5.5 printing using Fiery rip software on a Xerox 700 digital press.

Yes, that shoild be fine.
At this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files!
Disconnect the USB cable from any UPS so the system doesn't shut down in the middle of the process.

Problems printing PDF documents

I have problems printing any PDF documents. I use and HP LaserJet M1005 MFP and a SAMSUNG CLP-300; I'm able to print any documents but I can't print PDF with neither of the printers. I also have problems with the scanner of the HP LaserJet M1005 MFP; I cant scan docuemnts; don't have the option.

Hi vhcarmona, have you tried printing a PDF from Preview? And what error messages, if any are you getting from Adobe Acrobat Reader? Have you updated all printer drivers? Also is this a resent problem? Like after an update or upgrade.
JG

Problem printing Report with Image in BI Publisher 11g

I am working with BI publisher *11g* but I have problem printing images. Everything works fine if I do not include any images however when I add a image I get following problems.
When I tried printing PDF in output I get
Type /Xobject
subtype /Image
Filter /DTDDecode .......
When I tried printing HTML output I get
Type /Xobject
<html...
....>
When I tried printing RTF I get
{ \fontb1 }
{ \f0 Arial;}
{ \f1 Times:}
I think I am missing some BI publisher configuration. Can you help me in this regard.
Thanks,
Santosh
Edited by: user4956795 on Jan 16, 2012 2:08 PM
Edited by: user4956795 on Jan 16, 2012 2:18 PM

Isn't there a way for you to do this via a Package/Procedure versus having multiple queries?
Per the BI Publisher guide,
Following are recommended guidelines for building data models:
Reduce the number of data sets or queries in your data model as much as possible. In general, the fewer data sets and queries you have, the faster your data model will run. While multiquery data models are often easier to understand, single-query data models tend to execute more quickly. It is important to understand that in parent-child queries, for every parent, the child query is executed.
You should only use multiquery data models in the following scenarios:
To perform functions that the query type, such as a SQL query, does not support directly.
To support complex views (for example, distributed queries or GROUP BY queries).
To simulate a view when you do not have or want to use a view.
Thanks,
Bipuser

Problem printing pdf documents created by ps2pdf

When I try to print pdf documents that have been created from ps documents by ps2pdf, the output is corrupted. Many letters are missing but included graphics are printed just fine. This happens with my HP printer and with cups-pdf, when I print the pdf document to a new pdf document. There are no errors in the logs, so I don't know what is goning wrong. On a windows PC, the pdf documents are printed correct too. Other pdf documents, created by pdflatex are printed correct.
If I don't use ps2pdf and print the ps document directly, the output is correct. I have tried different pdf-viewers without any difference. About half a year ago, everything was working fine, so could it be related to : "As of version cups 1.5.3-3 ArchLinux makes use of the new full pdf-based printing workflow."?

Flo,
In my limited experience with the iOS iWork apps, they weren't designed for those who are picky about the layout. They are highly automatic and if you don't like the result, it's not easy to override. If the format when printed leaves unpleasant margins, I think your best approach is to reshape the tables in such a way that they will better fit the target media. If you are having large top margin, make the tables narrower, then when they scale to fit the paper, then may fill it better.
Jerry

How to print report in Draft and Document

Dear all,
I have a proplem when preview crystal report in Document .
I make a form using Crystal report for Incoming payment, then i import to it.
For example
When i create a document in Incoming Payment and save it. There is no problem with the crystal report.
But if i save the data as a draft. then i preview it , the report that i make in crystal report become blank.
After i check, the table is different when i save as a draft.
My question is How to make a dynamic crystal report so i can preview the report as a draft and preview it when the data have saved in original table ?
Thanks in advance
regards
Jia Shun
Edited by: Jia Shun on Jan 10, 2011 4:44 AM
Edited by: Jia Shun on Jan 10, 2011 4:46 AM

Jia Shun,
I had the same issue for printing A/R Invoices - I created a Crystal Report based on a SQL View, works fine with A/R Invoice document, but the Draft Invoice printing has 3 pages: 1st page blank, 2nd page with watermark "DRAFT", 3rd page my Crystal Report layout without any data. When printing normally it is only 1 page.
Here is what I did as a work around:
Create two SQL Views, one select from OINV (joining INV1 and other tables needed), the other select from ODRF (joining DRF1 and other tables needed), for the draft printing.
Create two identicle Crystal Reports, only difference are: datasource location (from different views), the "draft" crystal report has a watermark section.
Go to Administration>System Initialization>Print Preferences and uncheck "Print draft watermark..."
Import both crystal reports. Invoice can be printed normally. But the Draft Invoice has more steps: Open Draft document report, change settings so it shows the DocEntry in the Draft Table. Select and open the desired document, hit Print Preview, and enter the DocEntry, it displays the layout with data and "DRAFT" watermark.
This is a workaround. I don't like it because it is not scalable - too much workload if you want to print 100 invoices.
Hopefully someone will provide a better solution.
regards,
G

Problem printing Landscape documents

Hi I have an unusual printing problem.
I just received a new Windows 7 machine and am running Acrobat 9.4.1 on it.
I receive a lot of documents in landscape mode (i.e. presentation slides), which I have always diligently printed out by hitting the print button, changing my orientation to Portrait on the Page Setup tab, then going to the Finishing tab to select Two-sided Printing, Short-edge binding, and finally Staple + Collate with staple in the upper left-hand corner.
Until getting this new machine I never had any issues with having this print out just fine.
However, when I do this now I get a printout that has the first page of the presentation flipped into Portrait mode, with the rest of the document printing exactly the way I want it. Even more interesting is that if I hit the print button again - not having to change any settings since they were already in there from the previous print job - then it prints out perfectly fine.
I've tried this on different printers and am getting the same problem so it's not a print driver issue.

Just to add one interesting tidbit: So after printing the first presentation in Landscape - which always comes out wrong as described above - I go ahead and print out that one again and some others which all turn out fine. However, if I then go to print a regular report in Portrait and change the print settings accordingly, lo-and-behold the first page is flipped in Landscape mode with the rest of the document in Portrait as I want it.
So it seems to be the act of changing the orientation of the document that causes the first one printed to come out bad.

Problem Printing Report From Oracle Alert

I cannot get it to print. I have an Oracle Alert which spawns a concurrent program which runs an Oracle Report. The report runs but does not print since there seems to be no way in which to pass the number of copies to Oracle Reports.
This is probably not a supported feature but does anyone know of a solution to this problem?
The environment is Oracle Applications 10.7SC.
Thanks, Larry

What forms-version do you use?

Problems printing Acrobat documents on shared printer

I have a MacBook Pro and a Mac Pro. I also have an Epson 1400 printer.
When I print any Acrobat document using the printer hooked up directly to my MacBook, it prints perfectly.
When I print the same Acrobat document using the printer hooked up directly to the Mac Pro, it prints perfectly.
However, when I hook the printer to the Mac Pro and enable printer sharing, and then print the same document from the MacBook Pro using the shared printer via the network, the Acrobat document is reduced in size by around 50%. I have checked every possible setting and just can't find why this is happening.
Thanks in advance for any help!

The problem occurs not only through Acrobat. The prints have the correct size through the Mac only when the printer is directly connected via USB on the Macs but reduced size through the network. The problem occurs in any printer model on the network.
I do not know how to solve this problem but curiously does not occur with Windows computers with Bonjour that prints to the printers connected to Macs.
When Apple will fix this?

(9iAS) problem printing reports in pdf format on NT client

Hi
Some details first:
iAS version=9.0.2.3.0
Reports Version=9.0.2.0.3
Portal Version=9.0.2.3b
Client NT Version=4 SP4
Via a portal connection, a report is called by following a series of hyperlinks and the resulting url is like below:
http://devoc4j.testcentre.co.uk/nrdms/xml/xmlResultSetPDF.xml?PID=eip&SID=vPXP9kQLR2NK1us1004&RID=aGa3Bhbn2PkffA81014&DOCID=2uRpdWVlscVNCab1012&&ieh=report.pdf
This report produces a pdf output fine for a client that has Win2K, however, with Windows NT we receive the following error message:
The requested URL could not be retrieved
While trying to retrieve the URL:
http://devoc4j.testcentre.co.uk/nrdms/xml/xmlResultSetPDF.xml?PID=eip&SID=vPXP9kQLR2NK1us1004&RID=aGa3Bhbn2PkffA81014&DOCID=2uRpdWVlscVNCab1012&&ieh=report.pdf
The following error was encountered:
Unable to determine IP address from host name for unknown server name
This means that:
The cache was not able to resolve the hostname presented in the URL.
Check if the address is correct.
This is consistent across all NT client boxes.
I have changed the following settings on the NT boxes:
Select TOOLS > INTERNET OPTIONS > CONNECTIONS > LAN
SETTINGS and uncheck AUTOMATICALLY DETECT SETTINGS
This has had no effect, the problem is still existent. Does anyone have any ideas why?
Apologies for the length of the message, it's just to make it all clear!!
Regards
Andy

1. From Task Bar at bottom of screen, Select Start, ALL Programs, and Open Adobe Reader
2. Click edit
3. Click Preferences
4. Click Internet
5. Remove check mark for Display PDF in browser
6. Click ok
7a. Close Adobe Reader
7b Restart your PC to apply changes
8. Run your app
9. Generate a PDF report
10. A pop window will appear and check remember and then click ALLOW. Click Remember my action for this site.
11. You may need to Enter username and password (this needs to be done only once to initialize the connection between Adobe and Oracle login app) or if the password/username changes.

Problems print report on 9ias 9.0.2.0.1

Hi, I can run my reports on my 9ids fine, but when I run then on 9ias on the web I get REP-826. I have forms call object report with run_report_object with parameter forms in reports. I have in object report in forms: destype=cache, desformat=pdf, runtime and synchronous too in reports I have in destype=cache, desformat=pdf, mode=default, printjob=yes. I needs to be previewed before getting printed.
Any suggestions?

Hi, this is code trigger:
miconexion := get_application_property(username)||'/'||get_application_property(password)||'@'||get_application_property(connect_string);
v_param_rep := 'paramform=yes P_USER_CONNECT='||miconexion||' P_SERVERNAME=repsrv9i P_ACTION=http://business.alcosto-madrid.es:7777/reports/rwservlet?';
id_informe := FIND_REPORT_OBJECT('REP_INVENTARIO');
SET_REPORT_OBJECT_PROPERTY(id_informe, REPORT_EXECUTION_MODE, RUNTIME);
SET_REPORT_OBJECT_PROPERTY(id_informe, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(id_informe, REPORT_DESTYPE, CACHE);
SET_REPORT_OBJECT_PROPERTY(id_informe, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY(id_informe, REPORT_DESNAME, 'c:\aplicaciones\inventario\inventario.pdf');
SET_REPORT_OBJECT_PROPERTY(id_informe, REPORT_FILENAME, 'c:\aplicaciones\inventario\inventario.rdf');
SET_REPORT_OBJECT_PROPERTY(id_informe, REPORT_SERVER, 'repsrv9i');
SET_REPORT_OBJECT_PROPERTY(id_informe, REPORT_OTHER, v_param_rep);
respuesta := RUN_REPORT_OBJECT(id_informe);
v_job_id := substr(respuesta, length('repsrv9i')+2, length(respuesta));
estado := REPORT_OBJECT_STATUS(respuesta);
WHILE estado in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
estado := REPORT_OBJECT_STATUS(respuesta);
END LOOP;
IF estado = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||v_job_id||'?server=repsrv9i','_blank');
ELSE
message('Error en el listado, consulte con su Administrador');
END IF;
Thanks for reply.

Problem printing Report Document Draft

Similar Messages

Maybe you are looking for