Problem printing wirelessly with MX430 series

Hi there
I got a new laptop and cannot set up to print wirelessly on my MX430 series printer. I can print via the usb cable. I am using Windows 7. I have been to your website and dowloaded all the drivers once more - per suggestions in your forum for others having a similar problem. I don't seem to have the port that starts CNBJNP that you have referenced in similar type queries I have seen on your forum and cannot find it. Help?
GK

Verify the router is on the latest firmware. If not, upgrade it.
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 1...Wireless SSID broadcast should be Enabled and then click on Save Settings...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
You should use WPA2-AES and reset your TV and all your other wireless devices as it will ask for a new password/paraphrase.
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

Problems printing wirelessly with Canon PIXMA iP4500

I have a MacBook Pro 15 in 2.8GHz Core 2 Duo with 4 Gb RAM and I’m running Mac OSX 10.5.7.
1. My Canon PIXMA iP4500 inkjet printer used to work perfectly as a printer attached to the USB port of my Airport Extreme Model A1034 modem, when my computer communicates with the modem either wirelessly or via an ethernet connection between the computer and Airport, but lately it isn’t working.
2. When I try to print the printer icon shows up in the dock and when I click on it a Canon iP4500 series printer dialog box pops up and says the Printer is Ready but the status of the document is “Stopped”.
3. If I click on “Resume” and error message appears: “Operation could not be completed. client-error-not-possible”. This happen repeatedly.
4. I recycled the modem, turned the printer off and on (and did those things in reverse) and ran Airport Utility, all to no avail. I also deleted the printers in my Print & Fax System Preferences dialog box, downloaded the latest CUPS driver from Canon (ver 10.1.0.0), and recreated the printer (called Canon iP4500 Series).
5. Network diagnostics says it can connect to the internet over either my airport or Ethernet connection but it cannot connect to the Canon iP4500 series.riousbprint.tcp.local.
6. Also when I run the Canon IJ Printer Utility from the Canon iP4500 series printer dialog box a Printer List dialog box shows up with no USB-attached printers listed
7. I can print if I connect the printer directly to my MacBook Pro, so I don’t think it’s a driver or USB cable problem. Curiously, when I connect the printer directly to the computer the Print & Fax dialog box automatically creates a second printer called Canon iP4500 series-1. If I use the original Canon iP4500 Series printer in this setup it says “No pages found”.
Basically I’m stumped at this point and would appreciate some help. Unfortunately, I’m on a 3-mo sabbatical and do not have my original Canon printer software with me so I cannot reinstall the printer app unless someone knows how I can obtain it. Similarly I cannot reinstall Leopard either, though it doesn’t seem likely I should need to. Happy to try anything else though.

Hello Basil and welcome to Apple Discussions.
Reading your post, it would suggest there is a problem with the USB of the Airport Extreme, but I don't believe this to be case as there is not much that could go wrong with them. Instead I think there is something not right with the transport (TCP) protocols that get the data from your Mac to the Airport USB.
At this stage, I suggest you look at installing version 5.23 of the Gutenprint driver. This version supports your iP4500 and will help to narrow the cause of the current symptom.
Before installing the Gutenprint driver, I suggest we trash all the current Canon drivers you have installed - we can add them again later if need be.
Open Finder and navigate to Mac HD/Library/Printers/Canon/BJPrinter. Trash all the contents of this folder and empty the trash.
Next, navigate to the Mac HD/Library/Receipts folder. You will see the Canon iP4500 xxx.pkg and another one for the CUPS driver you installed. Trash both of these and empty also.
Now open System Preferences > Print & Fax and delete all the Canon printers in the list (highlight and hit ' - '). It would also be handy to reset the printing system, so while in Print & Fax, move your mouse over the now empty printers list, hold down your Control key and click (or right-click if you can). Click on Reset printing system when it appears.
Now install the Gutenprint drivers. When this is done, restart your Mac and try adding the iP4500 again. This time, after you select the Airport shared printer, you will have to open Print Using and search for the 'Canon iP4500 - Gutenprint v5.2.3'. Select this and now try printing. Let me now the result.
PaHu

Problems printing wirelessly with A_Extreme and Canon pixma i4000

Have had a Airport Express network setup with 2 Macs and 2 PCs sharing the printer wirelessly without problem for 2 years. Replaced the AP with an Extreme base station and now the printer is no longer detectable, although everything else is working well ( x one of the PCs can't detect the USB drive. )
2.16 GHz Intel Duo Core, G5 Mac OS X (10.4.7) 1GB ram

Some people have found that the USB 2 port is too fast for some printers.
You can try placing a USB 1 hub in between the printer and the AEBSn.
Another option
I've had an Canon iP5000 printer linked up to my AirPort Express for remote printing. It has never worked reliably: on long complex jobs it would just stop printing in the middle of a page. Well, now some early testing of a possible fix has allowed me to print long, complex jobs without the printer stopping in the middle. I'm happy, and will test the solution more over the next few weeks. Although not yet thoroughly tested, I thought I'd share my solution now, given how well it seems to be working. I set up the firewall installed in Mac OS X to limit the bandwidth of the connection to the AirPort, so that print jobs go more slowly to the printer.
http://www.macosxhints.com/article.php?story=20070118020953464

Problem printing wirelessly with my mfc-j835dw

Hi.
I have a problem printing to my mfc-j835dw brother printer. I did not experience this issue until our broadband provider changed our modem/router to [echolife hg521] since it was crashed. I am not sure if there is a need to check for the settings of the printer or the modem/router itself. I tried to use my mobile hotspot and connect my printer to it and luckily i could print wirelessly.
Any ideas regarding this issue?
Your response are highly appreciated.
Thanks!

Verify the router is on the latest firmware. If not, upgrade it.
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 1...Wireless SSID broadcast should be Enabled and then click on Save Settings...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
You should use WPA2-AES and reset your TV and all your other wireless devices as it will ask for a new password/paraphrase.
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Problem printing wirelessly with OfficeJet Pro 8600 on a Macbook Pro running OS 10.7.4

I just bought this printer. Setup when perfect, my Mac sees it and when I print, it starts fine, until... it looses contact.
I re-installed everything twice, and I even got the latest installer from HP's web site.
ePrint works fine, so I know docs make their way to the printer.
The router is a Linksys Wireless-N Broadband Router, model WRT160Nv2, with firmware v2.0.02
Please help!!!
I even make a clip showing the problem.... http://youtu.be/Qlep8ZK8Dv0

Verify the router is on the latest firmware. If not, upgrade it.
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 1...Wireless SSID broadcast should be Enabled and then click on Save Settings...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
You should use WPA2-AES and reset your TV and all your other wireless devices as it will ask for a new password/paraphrase.
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

HT1338 problems with Mac Book 10.7.5 printing wirelessly with HP Photosmart 6510e. I must turn off then turn back on for Mac to print.

HP Photosmart prints with PC, Droid phone but will only print wirelessly with MacBook OX 10.7.5 if I turn off printer and turn it back on. HP has tried, Belkin (router) has opened all ports, the problem persists.

That is great, but I recommend channel 11 instead of 10.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I get my computer to print wireless with HP6600

I have tried to get my computer to print wireless with the HP6600. I have tried all the trouble shooting things and still does not work. The printer is contected to the wireless network. I can print from my phone and Ipad fine without a problem.

@ minipinny26 - When you downloaded the drivers and attempted to install the software I am guessing the software could not find the printer. Is this correct?
If so, then did you try a power cycle on the circuit?
* Unplug router and wait 30 seconds
* Plug router back in and wait for it to completely repower up
* Restart the PC
* While the PC is restarting: Unplug the printer while the unit is on
* Wait 30 seconds and plug the printer back up for power
Can the software find the printer at this point?
If not, then can you ping the printer?
* Open the Command Prompt screen by typing CMD in the Run command box
* Type ping followed by the ip address of the printer.
Also, take a look at the steps in the document found here. Let me know what happens.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Printing wirelessly with Airport Extreme

Hi, I have an Airport Extreme (not newest model) that I used to use with a PC and I could print wirelessly. Although one day it just stopped and I was never able to fix it. I've since given up on PC's and bought a new MacBook Pro (yea!). Unfortunately, I'm still having problems printing wirelessly. Its prints fine when connected. Can someone tell me how to first see if the laptop can "see" the the printer over the network and secondly how to fix it so that I can print wirelessly? Thanks.
Printer is: HP Photosmart 8150 and I'm using the latest drivers.

The setup manual for the AirPort Extreme suggests.....
Connect the printer to the USB port on the AirPort Extreme and make sure that everything is powered up
On your Mac...
Open System Preferences (gear icon on the dock)
Open Print & Fax
Click the small + button at the bottom of the printer list to add the new AirPort Extreme location
Hopefully, your printer will appear in the next window. If not, it may not likely be supported.
If yes, click the name of the printer to highlight it
Click Add at the lower right
Try to print.
Remember to choose the correct printer location in the print dialog box as you now have the printer installed in two different locations....one at your Mac and the other at the AirPort Extreme.

Why can't I print wireless with Time Capsule anymore?

I have an Epson Stylus Photo 1280 that I have been printing wireless with for many years by plugging it in to the USB port on the back of the Time Capsule. Not anymore.
I have a MacBook Pro running the latest OS as well as the latest model Time Capsule running the latest software from Apple. I have tried using Airport Utility 5.6 which sees the printer plugged in. But when I try to add the printer to the Print & Scan system preferences, it shows up but says:
Software for this printer is available from Apple. Would you like to download and install it?
When I click "Download and Install" it searches for the software but then tells me:
The software for this printer is currently unavailable. Please contact the printer’s manufacturer for the latest software.
When I plug the printer directly into my MBP, I can add the printer and print without any problems. Per Epson, I have the latest software for my printer, so I'm not sure why Apple needs to search for the software and download it in order for me to print using the Time Capsule.
Like I said before, this all use to work flawlessly. I'm assuming all the updates have "broken" something.
Thanks in advance for any help and suggestions.

Well, I solved my problem.
I deleted the EPSON folder in Library/Printers as well as Library/Cache and installed the EPSON driver via Softwar Update.
Everything is working fine now.

I cannot get my HP OfficeJet 6700 to print wireless with my macbook Pro, I cannot get my HP OfficeJet 6700 to print wireless with my macbook Pro

I cannon get my HP OfficeJet 6700 to print wireless with my Macbook Pro? Any suggestions?

Just found a solution to this problem via HP technical support by changing my Officejet 6700's dynamic IP address to a static IP address:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/OfficeJet-6700-prin ts-test-page-but-not-Word-or-other/m-p/2257137#M51621
After making these changes and rebooting my printer immediately started working again.

Can I set up multiple usb hard drives- one for time machine and a second for media? Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Can one also print wirelessly with an old HP C6280 printer?

Can I set up multiple usb hard drives- one for time machine and a second for media?
Yes.
Can one also print wirelessly with an old HP C6280 printer?
Possibly by using an Airport Express, but depends on what type of port connection the printer requires.

My HP dv4-2045dx won't print wirelessly with my HP Officejet 6500 E709n

My HP Pavillion laptop won't print wirelessly with my HP All In One printer. It will print if it is hooked up, and the printer works wirelessly with my other computer. I've uninstalled the printer and updated the drivers. The print wizard goes through all of the steps to configure wirelessly, finds my printer, tries to connect, and fails at the last minute each time. I believe it may have something to do with the fact that I also can't scan to my laptop.
P.S. It used to print wirelessly. I have no idea what changed.

Yup, here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76971-1&cc=us&dlc=en&lc=en&...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I set up my PowerBook to print wireless with HP psc 2410

Can someone tell me how to set up my PowerBook to
print wireless with my HP psc 2410 all-in-one?
What do I need to do?
I checked ifelx list and check out ok for my model.
Thanks,
Kes
PowerBook G4 15 1.67GHz 10.4.2 512MB AirPort Extreme; iMac G4 20 1.25GHz Mac OS X (10.4.2)

Ensure that the Airport base station is configured to not distribute IP addresses.
On the iMac
System Preferences > Sharing > Printer Sharing
On the PowerBook
Applications > Utilities > Printer Setup Utility
Add Printer
It may work with the HP driver (which you will need to install on the PowerBook)
It may work with a third-party driver such as the HPIJS drivers or the Gimp-Print drivers, but this is not the case with all printers.

Have a MacBook Pro with 10.8.1 and want to print wirelessly with HP 3054 610a, currently connected via USB. Router is Apple Extreme without WPS button. How do I enter the said and passphrase to the printer. Can't use the cd install-no Mtn.Lion support

Have MacBook Pro, Airport Extreme router, Mtn Lion 10.8.1 and want to print wirelessly with HP 3054 610a which was installed 2 days ago via USB. Prefer to set up the printer on the wifi network, but how do I enter ssid and passphrase. On the printer control panel only has WPS option.

You didn't look far enough .... http://www.hp.com/global/us/en/wireless/printer-setup-help.html
The next thing is to look in the manual that accompanied the printer for how to use the wireless setup wizard!
This is specific to your printer ..... http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02217452&lc=en&cc=us&dlc=en &product=5109847#N728

Printing wirelessly with Windows Vista

Alright I just got our Vista laptop successfully connected to the TC wireless network.
Now I'm trying to print wirelessly with the Vista laptop, but when I go into "add printer" in the Vista control panel, it's unable to detect the printer. The printer is on.
My Macbook Pro is currently able to print wirelessly.
Anybody know what I can try?

I was able to add the printer on my Vista laptop with Bonjour on the disk that came with Time Capsule. Previously the laptop couldn't see the printer, but now it can wirelessly print.
This manual was helpful (p. 61).
http://manuals.info.apple.com/en/DesigningAirPort_Networks10.5-Windows.pdf

Problem printing wirelessly with MX430 series

Similar Messages

Maybe you are looking for