Problem Printing with Batch

I have a report that I can send to a printer when running the report individually (but it takes a long time to spool/print), but when I run it as a Batch to either a printer or PDF, the report completes successfully, but shows a "Printing failed" message. Does anyone know of a setting that limits/controlls the print/pdf output size? Any other ideas?

What product are you talking about? Hyperion Analyzer, Hyperion Reports or another? Also what version.

Similar Messages

Cs3 problem printing with mavericks

cs3 problem printing with mavericks

Hello @arcticbear38,
Welcome to the HP Forums!
I understand you're receiving a small portion on the left hand side of a document missing on both printers. I will do my best to assist you! Does this happen when you print from one program or many program(s)?
Both of these printers are not indicating low on ink? I would recommend resetting the printing system on your computer by following this Apple document here. I will be looking forward to hearing from you. Have a great night!
I worked on behalf of HP.

I am having problems printing with my HP 800PS design jet.

I am have problems printing with my HP 800PS design jet. I have to call IT all the time and it is losing its print settings and the print screen will freeze uot all the time. I am told that HP does not support this product any more.

This forum is focused on consumer level products. For the Designjet you may have better results posting in the HP Designjet forum here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

I have problems printing with a HP Officejet 6500 printer directly from my iMac. The printer itself does function well, as I can print from another PC without any problems. Does anyone have a clue?

Hello:
I must apologize . I should have checked here first:
http://support.apple.com/kb/HT3669#HP
According to the list, there is no driver for your printer included in OS X 10.7.
There are a couple of options:
1. Contact HP to see if they have a workaround.
2. If the model of printer is not listed but your printer is a PostScript printer or PCL Laser printer, try the "Generic PostScript" or "PCL Laser printer" drivers. Generic printer drivers may not let you access all the features of your printer.
I have not tried #2, but some people have had success.
Barry

Possible solution for problems printing with ICC profiles - esp. R2400

(N.B. This is long because I've decided to go in to details about the background of the problem etc.. Also note that whilst my experience is with the Epson R2400, anyone with problems printing using ICC profiles in Aperture may find this post helpful, as will be explained further down the post.)
Ok, here's the situation. I've been an Aperture user for over a year, and an R2400 owner for half a year. In that time I have done a huge amount of experimenting, but I've never managed to get Aperture to work perfectly with Epson's 'premium' R2400 ICC profiles - the ones you can download from their site which are better than the ones provided 'in the box'. This hasn't been too big a deal because, in fact, the R2400 does a rather good job just set to 'System Managed' in Aperture and 'Epson Vivid' with a gamma of 1.8 in the printer driver. Nevertheless, it really annoyed me that something that should work wasn't, which is why I've spent a lot of time trying to figure out what's going on. Having said that, I have come across a method which will give you pretty good prints out of your Epson R2400 using the premium profiles in Aperture - it's not perfect, but it's the best you're going to get if you want to use those profiles in Aperture. I understand the words 'it's not perfect' aren't what photography experts would probably want to hear, however, I have seen a few anguished posts from R2400 owners in here before, so I think some people may find it useful.
The whole reason why Aperture is hopeless at using the R2400's premium profiles is because - unusually - their default rendering intent is set to 'relative colorimetric' rather than 'perceptual'. You might say 'but that's good - it means you get more accurate colours!', and if you do, you're right... however, there's a snag. To get an image to reproduce well using Epson's premium profiles and relative colorimetric rendering, you really need to use black point compensation. This is where the trouble lies: Aperture's black point compensation is diabolical to the point of being unusable when used with relative colorimetric rendering - I feel I need to be awarded compensation every time I've ever tempted to use the setting. So because BPC in Aperture is unusable, that effectively makes the premium profiles unusable too, because Aperture always uses the default rendering intent specified in the profile.
The solution? Use perceptual rendering instead. Ok, so you can't change the rendering intent in Aperture, which makes that sound a tad difficult. However, as I said in the above paragraph, Aperture always obeys the default rendering intent specified in the profile... so you can see where we're going with this: we need to change the ICC profiles' default rendering intent from 'relative colorimetric' to 'perceptual'. I did some digging around and found one or two expensive pieces of software that could do that... but then I found that, lo and behold, the Mac OS has a command-line utility which can do the job for us, for precisely £0.00. It's called SIPS or 'Scriptable Image Processing System', and you can find out some information about it here: http://developer.apple.com/technotes/tn/tn2035.html#TNTAG58 For those who don't like reading technical jargon however, here's what you need to do to convert a profile's rendering intent. First go to terminal, then type in the following command:
sips -s renderingIntent perceptual
Do not press 'enter' yet. Instead, add a space after 'perceptual', find the ICC profile you want to modify, and click and drag it into the terminal window. You should then find that your command looks something like this:
sips -s renderingIntent perceptual /Users/yourname/folder/RandomProfile.ICC
At which point you can then press 'enter', and the command will execute, giving you an ICC profile which will now make Aperture use perceptual rendering.
There is just one further thing to be aware of after doing this: for some crazy reason, you then need to turn on BPC in Aperture for the prints to come out as good as possible. Black point compensation shouldn't make any difference when using perceptual rendering as the idea of perceptual is that it takes account of things like that anyway, however, in Aperture BPC does make a difference, so remember to turn it on to get a half decent print. In general, I find that prints made using this setup come out pretty well; they almost perfectly match prints made using the profiles with a perceptual intent in Photoshop Elements, except for the fact that Aperture blocks up the shadows a bit more than Photoshop. However, if you can live with that, you might find this is quite a workable solution.
Now, I said near the beginning of this post that all the above can apply to other printers too. Most printer profiles have 'perceptual' set as their default rendering intent, in which case everything I've just said won't be of much help. However, If you are reading this because you're having problems with ICC profiles in Aperture, but you don't use an Epson R2400, find your problematic ICC profile, double-click on it, and take a look at the window that opens: specifically, at the 'Rendering Intent' the window mentions. If it doesn't say 'Perceptual' then it may well be worth trying the steps I've outlined in this post to set it to perceptual, to see if doing so produces an improvement when using the profile in Aperture.
Finally, just one note of caution: if you decide to try out the steps I've detailed above on a paid-for custom-made profile, please back your profile up before messing with it. I haven't experienced any problems when using SIPS to change a profile's rendering intent, but I obviously can't guarantee that it won't do something weird and corrupt your expensive custom-made profile.
If you have any questions, feel free to ask, although (contrary to any impression I may give) I am not a colour-management expert; I'm just someone who doesn't give up when they have a problem that should be solvable.
Thomas
Mac Pro 2.0GHz with 30" ACD; 15" MacBook Pro 2.0GHz Mac OS X (10.4.10)

Thomas
Wow - thanks for such a comprehensive post.
I have Aperture and a 2400 so this information is exceptionally useful to me.
Again - thanks for caring and sharing
Brian

Problem printing with Epson 3800 and Photoshop CS5

I came across a problem trying to print with my Epson 3800 in Photoshop CS5. I recently upgraded to Photoshop CS 5 (and Lightroom 3). I tried to print using my Epson 3800 with CS5 but could not adjust Print Settings, Color Mamagement, Paper Configuration, Expand Border because those options are unavailable and there is a line crossing through them. I get a message that says "The bundle 'Print Setting' could not be loaded because it does not contain a version for the current architecture". It then says to contact the creator listed here for the latest version: PrintSetting version 3.57, Copyright SEIKO EPSON CRP 2001-2006. I can print through Photoshop CS4 as usual, but CS5 is a problem. I haven't tried printing though Lightroom 3 yet, and have not typically used Lightroom to print, but I wonder if that will be a problem too?
Any help will be appreciated.

If you run CS5 or LR as a 32bit application you will have all these option available to you. You can then save these options as presets that can then be applied when you are running the applications in 64bit mode even if you can not access them individually.
Also you might want to check Epson's download site especially the European site to see if there are newer drivers or updates for your printer. The newest drivers for other printers like the 7600/9600 support application running in 64bit mode.
Doyle

Problem printing with Lightroom using Vista

I just recently upgraded my XP system to a Vista 64 bit system. I print
digital photos using Adobe Lightroom 1.4. With my XP system, I had a
good match between my calibrated monitor (NEC 2690) and my printer (HP
B9180) working in the ProPhoto RGB color space using LR. I use ICC profiles (mostly HP Advanced Photo Paper) and let the Lightroom application manage the color. With Vista, I've lost my match. Skin tones look great on my monitor and now print with a red tint. A blue sky prints with a purple cast. I tried Lightroom Beta 2 but no difference. I'm using NEC's SpectraView II calibration software which is 64 bit compatible.
My workflow is to import the raw file into LR. After initial editing I then external edit the file in CS3 as a TIFF. If I print this TIFF file from CS3, it does match my monitor. If I print this same TIFF file from LR (my preference because of the print templates), skin tones look sunburned. If I export the TIFF file from LR as a JPG and print from CS3, it also matches my monitor. I reviewed my color management settings many times and can't find what's causing this problem.

I had the 'opposite' problem when I installed Vista 64. I had a perfect match with XP, Samsung SyncMaster 225BW, and B9180 printer. The monitor profile was created using Spyder 2 Pro. With Vista 64 my prints were desaturated. By increasing saturation by about +30 I had a reasonable but still not 'perfect' match.
I found and installed the Photoshop CS3 patch for the 64bit B9180 driver thinking it might be a solution, but that didn't change anything WRT the printer/monitor match when using Lightroom. I then tried printing from CS3 but had exactly the same mismatch. I then fell back to the first 'old standby', I uninstalled all of the HP printer software and then re-installed the printer software and the Photoshop CS3 patch. Problem solved. YMMV

HT2506 Is there anyone else who is having problems printing with Preview since upgrading to Lion OS X?

Since upgrading to Lion OS X, I have not been able to print any of my documents that were created in Adobe PDF. All calls to customer support have been a bust.
When I try to print anything it comes out looking like this:
Apple PREVIEW team!!!! PLEASE HELP!!!

Hi Linc...
Here is a copy of your prior post to me on a different forum...
Still no resolution...
Linc Davis
Re: Anyone having problems with Preview since upgrading to Lion OS X? When using a pdf form that allows multiline text, I am finding that the printing is completely illegible. The lines are stacking on top of each other.
Mar 11, 2012 3:13 PM (in response to pshrynking)
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, selectHelp from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Note: If you’ve activated FileVault in Mac OS X 10.7 or later, then you can’t enable the Guest account. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.
pshrynking
Re: Anyone having problems with Preview since upgrading to Lion OS X? When using a pdf form that allows multiline text, I am finding that the printing is completely illegible. The lines are stacking on top of each other.
Mar 11, 2012 4:13 PM (in response to Linc Davis)
Did all of that yesterday, with the Apple Representative on the phone, and nope, still a problem...it was kind of exciting, really, they kept going up and up the tiers of support until I got disconnected...Fortunately I had the email address of the gentleman who was helping me so that I could email him back and let him know that we got disconnected...as you might imagine, he still has not emailed me back. They were able to receive a copy of the form that I use for charting and try it in their facility on their computers, so we know:
1- it is not just my computer.
2- it occurred only after installing Lion OS X, not sure if they have tried it on Snow Leopard, but that's what I would have done if I was them...assuming that somewhere in Apple someone has not upgraded to Lion.
3- it is not just my software.
I think the problem is with the newer iteration of Preview not communicating well with the Adobe .pdf. probably some line of coding that needs to be written and insertedinto their program for multiline text.
:-) Thank you for your help!

Problem Printing With Inkscape

I'm having problems printing from Inkscape. I have libcups, cups-filters, avahi, ghostscript, gsfonts, samba, hplip, and hpoj installed. My printer is a HP LaserJet M2727nf MFP.
I'm currently using the Postscript driver. Printing from most programs works fine - but when attempting to print from inkscape, the job fails and CUPS gives me a "filter failed" error.
When using hpijs, attempting to print from Inkscape results in a blank printed page with the text "Error: /typecheck in --run-- / Operand Stack: / --dict:6/15(L)-- 1 11 Annots/E"
What can I do to address this? What other information can I provide?

dakaemch wrote:
Printing with my Epson C2800 Laserprint with any applications (Ai/PS CS4, Acrobat Pro 9 or Apple Preview), application would crash. Doesn't matter whether I am using my MacPro or MacBook Pro, same problem.
Can you post the crash report please?

Problems print with Canon i850/ which driver?

Ever since I installed Leopard, I have had printing problems with the color on my Canon i850 printer. Usually this has to do with magenta. If cleaned the printer, etc., and didn't have this problem in Tiger. Sometimes magenta will print in some colors, like purple, but sometimes it will print red, or will print red as green. I looked under System Preferences and there are two printers, an i850 and an i850 Gutenprint...which one should I be using? I am using the i850. Why is it that if I have red in a document, one place it may print and another it won't and the same red is selected? Also, where is the printer driver stored? Anyone also have any ideas on a great printer with Leopard? I do mostly black and white, but do color for pictures, not a huge amount, Xmas letters, etc. Just want a reliable, economical printer that the ink isn't outrageous, or is color laser the best? Any ideas or help will be appreciated! Thanks.

The printing of red as green doesn't sound right. Green is made from cyan and yellow. Red is made from magenta and yellow. So to get green instead of red doesn't sound like a cartridge/print head is faulty, which is sometimes the case for these types of problems. It sounds like you either have a driver problem or a colour management issue.
The i850 driver you are using is the Canon supplied version. Since this is giving you trouble, then I would try the Gutenprint version. If that still causes colour issues, then the colour management is most likely at fault. Did you upgrade from Tiger or do a fresh install?
As for the driver location, have a look at ./Library/Printers/Canon/BJPrinters for the Canon driver. Will need to check the Gutenprint location (I'm at home on Tiger). Maybe someone else can chip in...
Re the new printer, I can vouch for the Canon iP5300. It has a large black tank for text printing and separate C M Y K tanks for photos.
Colour laser gives better text printing, but the photos aren't as good. Also, the purchase price is often more, although the toner cartridges have higher yields than ink. Have a look at this link
http://www.macworld.com.au/reviews/view/colour-laser-printers-91

Problems printing with my HP Photosmart

Hello
I am trying to print with my wireless HP all in one printer but am having problems. When I try to print using a program such as Microsoft Word or Notepad etc, the printer just prints out a blank page i.e. it takes the paper from the tray, sends it through the printing process, but doesn't print anything. When I tried printing a page from my web browser it did print, but you could hardly see what was printed out as it was so light. I have tried printing test pages and they come out fine (nice, dark and clear pictures/lettering). I have tried reinstalling the printer software from the disc but this has not helped. In short, could someone please tell me why I can't print things from my software or off the internet.

Hi,
Make sure to enable the two-sided printing accessory within the driver tab:
Go to System Preferences > Print & Scan.
Double click the printer queue.
Click Settings.
Enter the Device tab.
Ensure the HP Two-Sided Accessory option is checked.
If the Driver tab do not contain any checkbox, it may cause due to improper driver update..
From the computer desktop, double-click the Macintosh HD icon.
Double-click the Library folder.
Double-click the Printers folder.
Right-click the HP folder, and then select Move to Trash .
When prompted, type the Administrator name and Password for the computer, and then click OK . Wait for authentication to complete.
Double-click the PPDs folder.
Double-click the Contents folder.
Double-click the Resources folder.
Locate your printer in the printer list, and then right-click on your printer and select Move to Trash .
When prompted, type the Administrator name and Password for the computer, and then click OK . Wait for authentication to complete.
Click the Trash icon on the taskbar, click the Empty button, and then click OK to empty the trash.
NOTE:By clicking OK , all items in your trash will be permanently deleted from your computer. To delete one item in the trash, click that item to highlight it, and then click OK .
Re-add the printer by clicking the plus sign under Print & Scan, the driver will be reinstalled via Apple Software Update.
Shlomi

Problems printing with adobe while online

every time I attempt to print a pdf that I am looking at on the internet, adobe locks up the internet and will not print the pdf. If I save the pdf to my computer and then print it, there is no problem and it prints like normal. Can you help?

Hi msumoore,
What browser are you using? Does the same problem occur with different web browsers? When you do print from the web browser, are you using the print button that appears when you scroll over the bottom of the PDF?
Best,
Sara

Problems printing with HP laser jet 5M and Snow Leopard

Hello,
Since In installed Snow Leopard on my mac I can no longer print with my HP laser jet 5M.
I know this is because Appletalk is no longer supported, and that I should use the laser jet as IP printer. However, I couldn't figure out how to assign an IP address to the printer. It seems I can't do this by the config menus of the printer. I read somwhere it is possible to do this by terminal (telnet) but I am not familiar with unix.
Can anybody help me to solve this problem?
many thanks
Marcello

This should get you started
http://www.macworld.com/article/142631/2009/09/snowleopard_printing.html

Problems printing with HP laserjet 1018

I'm using the hplip package. CUPS sees the printer, but I can't print diddley. I followed the wiki word for word and have googled extensively but I can't seem to figure it out. I tried printing as root, and as my user, and I am in the lp group but to no avail.
All that happens when I try to print is it says the jobs are all pending. Occasionally I get the error
"/usr/lib/cups/filter/foomatic-rip-hplip failed"
I also tried the foo2zjs with similar results. But with the foo2zjs driver it simply says all my jobs are complete, rather than pending.
I've also tried the hp-toolbox program that comes with hplip, it can get the printer to move!, but it still won't print anything.
Thanks for the help.
Last edited by jayjay44 (2009-11-04 18:14:24)

Read wiki, please. It would be helpful http://wiki.archlinux.org/index.php/Cups
Maybe this is solution
A HPLIP printer sends "/usr/lib/cups/backend/hp failed" error
Make sure dbus is installed and running, e.g. check DAEMONS in /etc/rc.conf or run ls /var/run/daemons.
hp-toolbox sends an error, "Unable to communicate with device"
If running hp-toolbox as a regular user results in:
# hp-toolbox
# error: Unable to communicate with device (code=12): hp:/usb/<your printer id>
or, "Unable to communicate with device"", then you may have to add yourself to the lp group by running the following command:
# gpasswd -a <username> lp
CUPS returns '"foomatic-rip" not available/stopped with status 3' with a HP printer
If you receive any of the following error messages in /var/log/cups/error_log while using a HP printer, with jobs appearing to be processed while they all end up not being completed with their status set to 'stopped':
Filter "foomatic-rip" for printer "<printer_name>" not available: No such file or director
or:
PID 5771 (/usr/lib/cups/filter/foomatic-rip) stopped with status 3!
make sure you have hplip installed, in addition to the packages mentioned above, net-snmp is also needed. See: http://bbs.archlinux.org/viewtopic.php?id=65615
# pacman -S hplip
Last edited by vennen (2009-11-10 22:08:18)

Problem printing with laserjet 3055 AIO

We have 3 or 4 3055 AIOs within our school district, and one is giving us a real headache. It is constantly asking us to insert pages. When I went to look at it (I'm a tech at the district), the LCD read READY MANUAL and it was only pulling from the manual feed tray (tray 1). Manual feed is set to OFF, but it is still trying to pull from manual feed.
I was looking at the other 3055s that we have, and they all have the same settings, so I dont know what might be happening.. None of them show anything in their setups about tray 2, even though they all have a tray 2. I initially thought that the problem printer just couldn't see tray 2, but they all looked the same way.
My question is, does anyone know how I can set it back to READY AUTO, when manual feed is already OFF?

The Tray 1 (the top small tray) of LJ3055 is a priority input tray, meaning if there're papers in both trays, the printer will pull those in Tray 1 first.
The Tray 2 (the bottom one) is the main input tray. The printer will pull paper from Tray 2 when there's no paper in Tray 1.
The LCD message "Ready Manual/Auto" does not indicate the paper input tray, but indicate the receive fax answer mode. If you want to change it, please go to Menu -> Fax Setup -> Fax Recv. Setup-> Answer Mode.
If you feel this solves your problem, please press the "Solved" button.
I am an employee of HP, but I only speak for myself not for the company.

Problem Printing with Batch

Similar Messages

Maybe you are looking for