Problem Processing Multiple Files in Photoshop Elements

I have always used the process multiple files option in the File drop down menu without issue. I recently completed editing some photos as I have done before and wanted to process them into a smaller JPEG file and add my watermark. I set all the settings in the process multiple files program and clicked OK. The first image came up and appeared to process but then a "save as" dialogue box came up. The box was asking to save the file as a photoshop file and not a JPEG. I cant seem to find out why it is doing this. I have restarted the program and my computer running it and I have tried running the same process on other files with the same result.

Which Elements version ?
Was it a raw format file ?
If so, is your bit mode menu in the middle of the bottom bar of the ACR dialog set to 16 bits ? Try setting it to 8 bits and save a raw file in 8 bits before trying the process multiple files again to see if that makes a difference.

Similar Messages

Sub folders and Process multiple files in Photoshop Elements 10

I am looking to apply the same adjustments to numerous images in numerous sub-folders and overwrite the original images.
Using the Process Multiple Files options, I added the main folder (which contains no images) to the Source field, selected the Include All Subfolders tick-box, also selected the Same as Source tick-box (which warns you original files will be overwritten) and then completed the image adjustments I required. However, after running the process all the adjusted images were saved in the main folder and did not overwrite the originals contained in each sub-folder. Does anyone know if there is a setting I am missing to replace the images in the sub-folders or is this by design ?

bossti a écrit:
hi, so is it possible to keep the same subfolder structure as output location? regards! bostjan
No...
I think you are going to run great risks in trying to use batch process like 'process multiple files' or 'export' while relying on subfolder structures.
- the organizer is much more powerful with its database and keywords management than a folder structure organization,
- Batch processes are limited in Elements
- 'Good practice' calls for keeping originals intact.
What are you wanting to do exactly ? We might be able to suggest alternative workflows.

Process Multiple Files in Photoshop Elements 4.0.

Please Help,
I have a lot to learn about digital photos and when I retire I will have time. However, I have 4000+ digital photos at 900.0 plus KB (approximate 42.66x32 72ppi) each. Now I discover they take up lots of room (my backup is huge) and need to be resized to properly email. I figure I will resize them all at the same time. I found process multiple files via the file drop down menu > Process Multiple Files by selecting one photo and opening Standard Edit. I then selected Folder in the process files from drop down menu, found my, large, digital photo folder via the browse button, checked include all subfolders, destination same as source, and quit at image size.
Am I on the right track? What is a reasonable image size? PSE uses width, hight, and resolution which is confusing when everyone else talks about file size. I found the PSE help information difficult to understand. I want to do this right the first time and would appreciate your suggestions.
I will change the settings on my Pentax Optio W30 Camera; after I get some help regarding the size issue, so my future photos will be easier to manage.
Thanks

Your images are already smaller than expected. The Pentax Optio W30 is a 7 mega pixel camera, which will produce images of about 3+ MB, when set to highest quality.
It is recommended to shoot at the highest possible quality, keep those images as "originals" and make copies for other purposes, such as email attachments.
If you are planning to resize and overwrite your originals, you will cause serious quality deterioration.
My suggestion is that you 1) set your camera to the highest quality and 2) get an exterior hard drive for storage.
Juergen

Elements 11, PC Windows 8. Problem: Process Multiple Files is grayed out. How can I activate it?

I have to reduce the resolution for files in a folder. I have done this in the past but have a problem with the reinstall of Elements 11 on a PC that lost it's mind and had to reinstall all software. The Process Multiple Files under the File heading is grayed out and will not allow me to point to the files to be reduced. Sure would like some help on this. THX.

You have to be in Expert Mode (see this picture) to enable the "Process Multiple Files ..." from the file menu. You are in the Editor windows, right?

Problem processing multiple files with dll

I'm using a function in a dll that turns a binary data file into a TSV file with actual numbers. The function takes three inputs, a pointer to a string for the input file path, a pointer to a string for the file to write and an integer for "integrity check" which as far as I can tell does nothing. I have the dll in a subvi, pass it a string corresponding to the input file path and let it convert the file. This works but will only convert the first 254 files then errors out. The only way I can get it to work again is to close labview completely and reopen it. My experiment requires the conversion of literally thousands of files so closing and reopening labview gets old real quick. I have tried creating a reference to the subvi and closing it for each file but this still does not work, I have also tried on windows xp and windows 7. When the new files are created they have a size of 0 kB and are empty until I close labview then they assume a reasonable size (few kB) and have data in them. Additionally if I try to delete one of the newly created files while labview is open I get an error saying the file is open in labview. I can delete the files when labview is closed. I have also tried opening each file and closing it after the conversion but that does not work either.
I believe this is some sort of file open limitation but I don't know how to get around it, I'm almost to the point of writing one of those mouse move/button click macros nerds use for games to convert the files because this is driving me insane.

I managed to get the c code for the dll (it was somewhere on the computer). I can only pass an integer to validity otherwise it errors, is there an unsighed char in labview?
_declspec (dllexport) int converting(char *filetoRead, char *filetoWrite, unsighed char validity)
FILE *fpin, *fpout;
int result;
int records=0;
int valid=0;
unsigned long MTOFL=0;
unsigned long MT;
struct {unsigned ADC:12;
unsigned INVALID
unsigned MTOV:1;
unsigned GAP:1;
unsigned ZERO:1;
unsigned MTHIGH:
unsigned R:8;
unsigned MTLOW:
} DataRecord;
fpin=fopen(filetoRead,"rb");
fpout=fopen(filetoWrite,"w");
while(1)
result = fread( &DataRecord,
if (result!= 6)
return(0);
records++;
if(DataRecord.MTOV)
MTOFL += (unsign
if(validity==1)
if(DataRecord.INVA
continue; // don't sav
valid++;
MT = (((unsigned long)Data
fprintf(fpout,"%11lu",MTOF
fprintf(fpout,"%5u",DataRec
fprintf(fpout,"%4u",DataRec
fprintf(fpout,"%6u",DataRec
fprintf(fpout,"\n");
fclose(fpin);
fclose(fpout);
return 0;

Process Multiple Files jpegs grayed out

Process Multiple Files in Photoshop Elements 10 for Mac OS 10.9.2 worked on several folders of jpegs then stopped working. Any folder that contains jpegs has the jpeg files grayed out. I get the error message, "The source folder you have selected is empty." However I can work on the jpeg files in that folder if I do it one at a time. I tried quitting the program then going back in and still I get the same error message.

R_Kelly
The folder I was trying to process was in another folder with a
backslash in the name. Once I removed the backslash, Process Multiple
Files worked again. Thanks for the quick response and the helpful hint.
Sincerely,
Todd
R_Kelly wrote, On 5/10/14, 5:59 PM:
>
Process Multiple Files jpegs grayed out
created by R_Kelly <https://forums.adobe.com/people/R_Kelly> in
/Photoshop Elements/ - View the full discussion
<https://forums.adobe.com/message/6371873#6371873>

Photoshop Elements 7,Process Multiple Files , size of destination file wrong

In Adobe Photoshop Elements 7, I am using the Process Multiple Files tool to change the names (First Box contains: “Rob” + Second Box “1 Digit Serial Number”) of files an add a watermark. The Name & water mark are created correctly.
The Resize Images Box & File Type Box are not checked.
No matter what I have tried so far the destination size if the files is about 1/10 the size of the source, for example 5,728 To 506 .
What am I going wrong?

Thank You
Your suggestion let to my solution of the problem.

PhotoShop Elements 10...I need help with font size for watermark in Processing Multiple Files.....

I have PhotoShop Elements 10, and I am trying to watermark some of my photos, I have successfully added them one at a time with a font large enough to be seen. Now I am trying to add it using the "process multiple files" , I can do that but the font even at 72 the largest setting is so small on the photo you can barely read it! Can anyone help me the size larger on my photos?

Thank you, Michael. I just watched the Russell Brown video again for CS6 and looked real closely at his settings in ACR and he was using 240ppi. I changed my file in image size to 240 ppi and then ran the script and the layer didn't change size this time when I ran the script.
It is kind of annoying to have to change the image size everytime I want to run this script and then change it back again as most of my files are 300 ppi. I used to run his script for edit in ARC in CS5 and recall that if I just remembered to change the settings in ARC to 300 ppi while the script was playing and before pressing 'open' that the image wouldn't change size during the raw processing, but this doesn't seem to be working in CS6. Do you know of a way to use this script and not have to change the ppi for the image to 240?
Thanks again.

Why can't I use 'process multiple files' in elements 12?

why can't I use 'process multiple files' in elements 12?

Problem now fixed thanks.
Sent from John's iPhone

How do I design a Process for resizing multiple files for Premiere Elements

Hi
I am trying to understand how best to resize my slide shows of still photos to export to Premiere Elements, to reduce errors in rendering, as advised on a separate discussion.
I understand I should reduce the resolution to something like the PE Frame Size, 720 by 576 for UK PAL.
I cannot do this on Files with pan and zoom
So I think this is what I do
Export a Collection to a file.
Resize all files in the folder to a new folder using the Process Multiple files command
On trying that I have the following questions
If I do it this way, the files in portrait orientation don't correctly resize to the size I want, so what do I do with a folder of mixed orientations? Do I do two passes, or rotate the Photos, or something else?
Now do I now have to reimport all these photos (the resized collection) into the Catalogue, create a new Collection, and then apply zooms in my Slide Show creation of this Collection. I really want to retain the original photos for printing quality so don't really want to take the originals out of the Catalogue. I will end up doubling the size of my catalogue?
Will the pan/zoom ones cause a problem to render in PE?
Thanks
Chris

I have PEv.8 on my machine now, but it is probably the same in v.5
In Editor, go to File>Process multiple files. In the dialog, on the right under "Labels" you should find "Watermark".
An alternative is to make a brush containing the information which you wish to impart. With a brush you can place it precisely in a locus that you desire, but this would be labor intensive for 400 photos. The brush would be retained among the other brushes, and it could be used at any time.

Elements 11 crashing When using Process Multiple Files

When I use Process Multiple Files and click on the Browse button, the wheel turns and doesn't work anymore. It just stays there for awhile. I would reinstall, but I don't know where the product key is.

Hi csssaratoga,
Thanks for posting on Adobe forums.
Please find the download link for Elements 11
Download Photoshop Elements products | 11, 10
To find the Serial number please check the following aritcle
http://helpx.adobe.com/x-productkb/global/find-serial-number.html
Let us know if this helps.
Regards,
Sandeep

Elements 11 process multiple files

In elements 10 i used to be able to convert multiple .nef files to various jpeg resolutions at one time by using "process multiple files" under the file heading. When i try to do this inelements 11, that option is unavailable (unhighlighted). How do i do this?
charlie

Thank you, that's exactly what i needed to do,
charlie

Process multiple files elements 11

When I try to process multiple files on elements 11 the option is greyed out can anyone tell me why that might be happening?

Generally that means that you are in guided of basic mode. Switch to 'Expert' mode and that should do it.

Processing Multiple Files Problem

Elements 5.0, Windows Vista
Under FILE I see there is a "Process Multiple Files" function.
I have gone there and tried to process several images... setting it to "Convert To JPEG Medium quality" and processed.
My thought is that, same as "Save To Web", it would have taken a 100k jpg and made it say 40k for the web as it would if you used "Save To Web" and saved with JPEG Med Quality there.
But it doesn't, the file size is near exactly the same after processing. I have hundreds of images to process at a time and I can't possibly do save to web one by one by one.
Any idea what is going on? How to make it work? Maybe it's not supposed to do that?
Suggestions on how to automate a batch of alot of images for save to web compression?

Check out (free) ImageMagick
-- it has a
wealth of options for image conversion.
Best regards, Be sure to check for answers to your questions at
John Navas http://help.adobe.com/en_US/PhotoshopElements/6.0/

Process Multiple Files in Bridge

I am trying to process multiple files in Bridge CS3 using Photoshop Elements 9. It does not give me an error, it just does nothing. Can someone help me figure out how to fix this? It used to do this now I am having problems.

Can someone help me figure out how to fix this? It used to do this now I am having problems.
Without knowing your workflow or your OS to my knowledge Bridge CS3 is not designed for Photoshop Elements 9 but for Photoshop CS3. There used to be a Bridge CS4 version bundled with PSElements 8 for a Mac but thats all I know about it.
However if you want to open files from Bridge in PS Elements you should either select the files you want and with right mouse click menu choose open with and from the submenu choose PSElements 9 or go to the Bridge preferences file type associations and change the file type you need in PSE to open in PSE9 by default.
If this is not the answer you expected could you be more specific about OS (windows/Mac) and what you mean with process (raw settings, batch actions or just open in, etc.)

Problem Processing Multiple Files in Photoshop Elements

Similar Messages

Maybe you are looking for