Problem processing RAW images with Lion and 3.1.3

Images that have "This photo was adjusted using an earlier version of Apple's RAW processing. Attempting to send to a plug-in or Photoshop results in a dialog "Editing Error This image cannot be rendered for editing because Aperture does not support the image format." Images that were previously processed with the current version of RAW processing work correctly.

There is another discussion for problem with raw and the new 10.7.3.1 : my Raw from Panasonic GH2 are green and Aperture says : treatment with old version
I find the solution to correct my RAW : they are green because of the bad WB applied by Aperture.
I put here the solution but I have to correct manually and ask to treatment in the RAW windows for each picture. If it doesn't work, I correct manually the WB.
https://discussions.apple.com/thread/3942768?start=0&tstart=0
We have to report this bug to Apple.

Similar Messages

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

How do I convert raw images with side car to Dng and

How do I convert raw images with side car to Dng and preserve the sidecar info in the DNG?
I have tons of raws + xmp sidecars that i want to convert to dng, because the raws are from different camera brands and i want to get everything simplified. so that i do not have to worry if I will be able to access the raws in the future, if I decide I want to rework some of the files.
T.I.A.

If the images are already in your catalog you can select them then choose Convert Photos to DNG from the Library menu. You'll be given the option of deleting the original raw files. Either way, Lr will only display the newly created DNG files.
The alternative, which is better suited to images not already in the catalog is to use the Adobe DNG Converter

How can I process Raw Images taken with a Nikon D7000 in PS4 Extended?

How can I process Raw Images taken with a Nikon D7000 in PSE Extended?

Hi there
Unfortunately, CS4 does not support the Nikon D7000. You'll have to download the Adobe DNG converter (links below) to process RAW files from your camera.
DNG converter 6.3 - Mac
DNG converter 6.3 - Windows
Here are some answers to similar questions asked over in the Photoshop General discussion:
If you need further information on this topic, please feel free to post in the Photoshop General Discussion or in the Camera Raw forum.
Camera Raw | Supported cameras
Camera Raw | compatible applications
Cheers,
Kendall

Using RAW images with CS6

Hi - im not sure if there is another forum that answers this question.
So far the only way I have been able to open up a RAW image in photoshop which then automatically launches camera RAW is by going to finder > iphoto > open package contents - to find the original file. Ive been told that can possible damage/corrupt yout image library. Is there another safe way to deal with RAW images? Right now iPhoto will open a raw image with photoshop the problem is it throws it over into PS and claims its a JPEG.
Maybe im just not as educated as I need to be with the Apple software.
Thanks in advance!
J

Set ACR as your preferred editor in iPhoto
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> Advanced -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor.
Then check the box underneath 'Use Raw when using external editor'
Now your Raw will be sent there.
But getting it back is a bit of a kludge
You cannot save a Raw. The work you do must be output to a new file, in a new format (jepg, tiff, whatever). However, as the External Editor is making this new file iPhoto has no knowledge of its existence. Therefore you must save it to the desktop and then import it back to iPhoto as a new file.
This means that you will have your Original Raw and the processed version in iPhoto but they will not be recognised as version and original. iPhoto will see them as two separate shots.

Quick preview looks better than processed raw image...??

Hey all, probably a bit of a "newb" question here... so forgive me, and thank you...
Using a D7000 and often times when I shoot - the preview image on the camera looks BRIGHT, VIVID and ROBUST ... after import however - when reviewing my shots, JUST as I arrow over to the next shot - many of the preview images tend to look better than the processed image that aperture displays once it's done spinning it's wheels.
Perhaps I've messed up a Raw Fine Tuning setting?
When I click on quick preview and browse through an import, the pictures truly look nicer to me than the when aperture processes them.
Without question, the display on my acer monitor is a far cry from the miniature compressed image on the back of my nikon, however the more i shoot, the more I realize a disconnect between what I think I should see, and what I'm ultimately seeing in Aperture.
Are their specific settings to fine tune the import of raw d7000 shots?
Thanks much.. gk

I take it you're shooting and processing RAW images?
It's worth remembering that if you have a picture style selected (i.e. vivid etc), your camera might be applying extra contrast and saturation etc to the image you see on the back of the camera. Camera manufacturers do this so that we can give our pictures some extra punch and colour automatically.
I'd also be wary of comparing what you see on your camera to what you see on your monitor. Unless both are calibrated, you shouldn't trust either of them 100%. The best example of monitor calibration is going to look at TV's in an electronics store. You'll probably notice that in a wall of TV's, some pictures will be darker, some lighter, some more vivid, some more saturated. Using a calibration tool adjusts the picture your screen and monitor displays so that it is 'accurate'.
It's a bit like having a room full of scales and adjusting them so that they all read 1 kilogram when a 1 kilogram weight is placed on each of them. Calibrating monitors will mean that when you display an image on it, it will always look the same rather than getting the some light/some dark problem you saw in the TV store.
It's a tricky subject to explain (don't worry if it doesn't make sense), but you might like to have look around YouTube for videos on the subject.

How can I process RAW images?

Can anyone tell me how I can process RAW images? I have a lumix FZ45, iPhoto on Mac OS X Lion 10.7.5 (11G63)

Using software that supports RAW for that camera
it should come with the camera - if you have iPhoto '11 version 9.4 or above these Mac support list for Lion is here http://support.apple.com/kb/ht4757
LN

Before purchasing Elements 12, I would like to know if it will process RAW images from an Olympus OMD-EM1. Can someone advise? or tell me how to find out?

Before purchasing Elements 12 I need to know whether it will process RAW images from an Olympus OMD-EM1. Can someone advise or tell me how I can find out?

Hi,
This document defines the supported cameras
Camera Raw plug-in | Supported cameras
According to that, the OM-D E-M1 is supported by Camera Raw 8.3 which is compatible with Photoshop Elements 12. You should try the trial download first to make sure you are happy with it.
Once you have downloaded and installed the trial version you will need to go to the help menu and select Updates..
If you decide to buy it, you can convert the trial version to the full version by supplying the new serial number.
I would avoid the Mac App version and don't get the upgrade version unless you have an older version.
Good luck
Brian

Is there any way to darken the gridlines in iCal? I'm using it on a Macbook with Lion and find it difficult to see the gridlines on the iCal display.

Is there any way to darken the gridlines in iCal? I'm using it on a Macbook with Lion and find it difficult to see the gridlines on the iCal display.

''Problem:'' For whatever reason, NoScript is stopping Runescape Community Toolbar from working properly which freezes your first Firefox window.
''Fix:'' Uninstall the toolbar. Disable NoScript. Install the toolbar. Add your RS account to it and make sure it works, then Enable NoScript again.
EDIT: Posted a fix earlier that was wrong. Corrected to the right one, sorry ^_^ Answer was on Runescape Forums.

I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

My solution, which is not much, is to restart iPhoto and it then connects to the Internet. This has been an ongoing unsolved problem.

Is there something very wrong with Lion and Fcp x or what?

I have just spent a very frustrating two weeks editing a one hour fifteen minute project on FCP X with Lion as the operating system. Every edit session has been plagued with crashes. My mac is a 21.2 inch, with an I7 processor and 12gig of ram which I bought the middle of this year. I had set my computer up with two partitions, one with Lion and the other with Snow leopard. This morning, in an effort to improve the terrible instability of FCP X under Lion I decided to try it under Snow Leopard......What an unbelievable difference.....I've been editing for the last three hours now throwing all kinds of clips and effects and so forth at the timeline and have not experienced one crash. What is going on here? How can Lion and FCP X be so incompatible?

dpcam1 wrote:
I have just spent a very frustrating two weeks editing a one hour fifteen minute project on FCP X with Lion as the operating system.
You don't mention whether this one hour and fifteen minutes long project consisted of just one FCP X project when you experienced problems with FCP X and Lion?
You also don't mention how long the project was that you edited successfully with Snow Leopard. If, as I suspect, this was a very short 'test' project, that would make sense. FCP X does not cope well with long projects.
I use Lion exclusively but I keep my projects to a maximum of 30 minutes (preferably no more than 20 mins). If the total programme is longer, I make create several FCP X projects - each being a 'chapter' of the main programme. When finished, I make compound clips of all the 'chapters' then I paste them into a new (full length) project.
I'm not pretending FCP X is perfect, but for me at least, it's very workable as long as you understand it's weaknesses. I have 16 GB RAM and since I upgraded from the 8 GB I had previously, it's made a huge difference.
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Other ways to improve performance:
Create optimised media.
Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
Create folders in the Project library and put any projects you are not working on currently, in there. (Twirl it closed to hide them).
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
Andy

Photoshop won't open Raw images with my new Camera Canon 6D help! I use Photoshop CS5 extended version.

Hello,
I got a new camera and Photoshop and Lightroom won't open Raw images with my new Camera Canon 6D help! I use Photoshop CS5 extended version. and Lightroom 3

Good news and bad news:
The bad news is that you need CS6 or higher to open 6D RAWs. (The 6D didn't get support until Camera Raw 7.3; 7.0 premiered in CS6.) You can choose to upgrade (I'd recommend skipping CS6 and go straight for CC 2014 for $10/month) *OR*...
...the good news is that the DNG Converter can help you convert your RAWs into DNGs for use in CS5 and Lightroom 3.

I'm thinking of buying a new camera. Does anyone know if can I process RAW images from a Nikon D5100 or Nikon D3200 using IPhoto on a OSX 10.5.8?

I'm thinking of buying a new camera. Does anyone know if can I process RAW images from a Nikon D5100 or Nikon D3200 using IPhoto on a OSX 10.5.8?

I think you'll note that Google found the list for 10.8, amazing, isn't it
No, neither are supported for Raw on 10.5.8
You'll need 10.6.8 minimum for the D5100
http://support.apple.com/kb/HT3825
and for the D3200 you'll need 10.7.4 plus compatibility update 3.1.3
http://support.apple.com/kb/HT4757
Bear in mind that you may also need to update your version of iPhoto too.

I want to install hybrid drive in Macbook pro. I bought my Mac book with lion and am now running mountain lion. I was told I needed install disk to set up new drive before restoring from my time capsule.Is this correct and if so how do I get disk osx10?

I purchased a Mac book Pro in Aug 2012 with lion and have upgraded to mountain lion. I currently am looking to install the segate 750 gig hybrid drive. I watching video I shows me needing a OSX 10 disk to boot off of when the new disk is in and the use time capsule to restore system from back up drive to new hybrid. Hope I got this correct so far. that being said my Mac Book did not come with a disk therefore is one available, when I get to point of restoring from back up with it be the same mountain lion system I had. Sorr if this sounds redudant.. Thank you in advance

Connect the new hybrid drive to your MBP. Start up your MBP holding the OPTION key, the two HDD icons will appear. Select the 'restore' icon on the right. When you get to the menu where you have 4 options, select Disk Utility. Format the drive and then you can use the option of restoring it from Time Machine.
Ciao.

I just purchased an IMac with lion and I tryed to install an old math program that is for winmac running systems. When I try to boot the cd it comes up with a notepad window with a bunch of weird symbols and codes but the program will not start up.

I just purchase my first IMac with lion and I was trying to install a math program I bought 6 years ago. When I went to boot it off the disk while following the program instructions a window popped up with a note pad format with symbols and codes but the program would not download or open. How do I get this program to work? It is a mac compatible program by the way.

Your Mac probably does not know with which application to open the file and is opening a file with a text editor that really needs to be opened by the application itself. Try starting the application first, then use the File > open command to open the file.
As varjak paw comments, there isn't a "winmac" so that's not telling us anything.
Note that it is possible that software purchased 6 years ago may no longer run on your computer. Once we know what it is we can help more.

Problem processing RAW images with Lion and 3.1.3

Similar Messages

Maybe you are looking for