Problem .prproj - "damaged"

I just updated the whole master collection of adobe. I still can't open a normal .prproj file - done in premiere (but creative cloud). I can't see the reason, why there's a problem to open it. Especially, since I've updated the new version 6.0.5.
When I'd like to open the file, I just can read "the data is damaged".
Anyone? I'd be very thankful.

Did you manage to get around your issue without resorting to a wired keyboard? My brother has the same issue.

Similar Messages

  • !!HELP!! Iphone4 battery problem, water damaged.

    My phone is showing (for example) 27% battery, then turning off, then turning its self back on, then showing 2%,then turning off,then showing 56%,then staying on for a few hours and not going down at all no matter how much it is used.when charging the percent does not increase even after 6 hours on charge then will start going up and down when it turns itself off/on. The phone was dropped in water but was left to dry out and was fine initially. It also says "no sim" sometimes. Is this a battery problem or a problem with the actual phone? everything else on the phone works great, no lcd damage, no mic/speaker/camera problems. It is very strange. Any ideas? Also, the apple service charge of £126, does this cover more than one problem? As the glass on my screen is also smashed, would this be £252 to get both issues fixed?
    Thank you for any info you may have,
    Alan.

    The Out of Warranty fee is not to "fix" issues, it is for a replacement device.

  • Lightroom import problem, or damaged catalogue

    Hi, tried to import a large file of large raw pics directly from flash card into lightroom. the file was a bit big and it crashed.
    now it wont import at all, even one pic from hard disk.
    I ran the catalog optimiser. no change. 
    I upgraded from 2.6 to 2.7 hoping a bug fix might be there.
    no better.
    I removed lots of pics to reduce size (had over 8000 pics in lightroom) and re-optimised
    but still no import. no error message just no importing.
    any ideas anyone?

    Hi , thanks John, sorry I have been away for a few days.
    I am trying to get a consistent behaviour to a set of circumstances so I can give you specific details, in case it helps you spot the problem or suggest a cure.
    here are details of todays experiments...
    i now have 3 catalogs set up under the PC user where the problem occurs. (under  the windows admin user there is no problem, only the one where the error/corruption has  happened.)
    the 3 catalogs are -  1. a brand new one I set up to try and see if i could recreate the importing failure
           2. the original corrupted one.
           3 an  exported one from the original above
    I have several folders of pictures copied from the flash drive onto the hard drive.  the pictures are around 18 to 20 mb each taken in RAW.(pics from this camera have been processed many times before without problem)
    If I take a folder with 17 pics in it - it imports fine into the new cat (number 1)  but it fails after one or 2 pics in both 2 and 3.
    When I import I use the following import settings :
    add photos without moving, dont re-import suspected duplicates, dev settings -none,  metatdata - none, keywords window - blank, Initial previews minimal.
    I  start  the import, and loads a few pics (sorry when I repeat this sometimes it takes just one and sometimes a 2 or 3), then it stops with the import progress bar showing at top  left of screen as partially imported.  it hangs there and nothing happens, I come back later but no change. so I close lightroom and it says there is an import in progress do i want to quit or wait. well wait just hangs so i try quit.
    When I open the same catalog again, it has the folder showing on the left but only one or 2 pics in it, so I tried the suggestion in your last post, i right clicked on the folder and selected synchronise. it syas it is waiting to import the reamining 14 or so pictures with ticks on 'import new photos', 'show dialog' and 'scan for metadata' so i try the import again. i click to show preview - all the pics show on the preview fine.
    but the import tries and stops with the dialog progress bar in the top  left and no activity.
    I left it for ages but nothing.
    As it works fine on the new small catalog and fine on different pc user catalogs, I think the problem must lie in the catalog of number 3 and exporting it (number2) also has the same problem.
    So i am thinking I will just have to import all 8000+ pics into a new catalog and bin the old one however i will loose all my tagging and editing etc.
    any othe ideas?

  • Installation Problems - "Applications Damaged Or Incomplete"

    Hello! I would greatly appreciate some help on this matter. I recently purchased CS4 Web Premium and began installing it on my Macbook Pro. After the first disk was finished I inserted the second disk and walked away for 15 minutes. I came back to see the login screen so I assumed the installation was complete and that my computer automatically restarted. However, when I look in my Applications I see that critical items are missing (like Photoshop Extended) and although some icons/folders are there the programs won't open (a pop-up appears saying that the application is "damaged or incomplete". What should I do? Please help me!

    Is it really possible to delete applications for good that easy though?
    If you run as an admin user, yes you can delete many apps without any "Are you sure?" type warnings. Some operations require you to confirm them by entering an admin name & password, even if you are logged in as admin.
    You can also move apps to non-standard locations or rename them, which sometimes makes it seem that they are deleted when they are not. If you can remember the steps you took before you noticed that the apps went missing, it may shed a clue about this.

  • IPhone problems, water damage

    Hey there, I need some help on what to do with my phone. I dropped it in water for roughly 5 seconds. After that it would not turn on so I disassembled it and used a blowdryer on it for an hour. Now, my speakers won't play any sounds, my screen has grey spots underneath it, the 'this accesory is not compatabile...' message appears every so often even thiugh nothing is plugged in and it shuts off every so often randomly. How can I fix this and if I can't, is this covered under warranty? Cheers.

    Accidental damage is not covered under the iPhone's warranty. Apple's warranty for the iPhone is a limited manufacturer's warranty, not insurance.
    Sounds like there is hardware damage which could affect a number of components. No one here or remotely can determine which component or components are damaged.
    Apple offers an out of warranty or not covered under the warranty "repair" price, which pays for an exchange at a discounted price off the full retail sales price. The cost in the U.S. is $199 plus applicable sales tax. This pays for an exchange - for the same model.
    Or you can contact a 3rd party repair service which will need to have the iPhone on hand to inspect and run a diagnostic check to determine which components are damaged and need to be replaced along with the cost.

  • 845 PE Max 2 Problem with damaged capacitor

    Hi, my system is:
    MSI 845 PE MAX 2 SOCKET 478
    INTEL PENTIUM 4/ 2.4 NORTHWOOD  FSB 533
    2X512 MB DDR 333
    MSI GEFORCE- AGP X 4 128 MB- G4Ti4200-VTP
    SEAGATE ST3200 828A-200 GB
    WD WDC ND2500JB-250 GB
    XP PRO SP2
    The problem is:
    The computer case and specifically the DVD is accidentally kicked by a child, the DVD moves and hits the capacitors located to the right of the DDR memory modules. Specifically the capacitor to the right, the last one before the right corner of the motherboard falls off. I tried to reposition the capacitor back in place ( no soldering) but the motherboard does not boot. In fact it seems that there is no power supply. I checked the PSU with a multi-meter and seems to be OK. What is wrong ? Is the motherboard useless ? Any help is welcome.
    Thanks in advance.

    Was this machine on?!?  If it was, your board may well be dead.  If it wasn't, you could bring it to a computer repair shop who has someone with good electronic soldering skills to see if they can fix it.  But, I don't hold out a lot of hope.  If the board gets fixed or you get a new system, secure that drive.

  • How you can solve a problem or find out on a dead pc if the problem relies on motherboard and not on processor or vice versa

    hi.
    I am working myself with computers ,  so there is one thing in my mind I wanted to be sure,which I couldn't find an answer for it!
    because I had before totally black screen and the problem was damaged processor.
    I am wondering how I can be sure as the last option when I get a black screen and there is no lihgts at all no any LED is lighting.totally dead pc.
    how  you can be sure then that the problem relies on processor and not on motherboard or vice versa the problem relies on motherboard and not on processor
      because I can't say to the customer lets buy first a processor if it is the cause of dead PC and if not then we buy motherboard. this sounds not wise.
    so I experimented first with my latop ,I pulled out the processor to see if I can see any LED light or any movement on the motherboard to be sure that motherboard giving me some clue that it is healty. I gave some light heat to de fan to let it turn ,because 
    it is working with heat sensors then I know that the motherboard is healty. but it didn't work. 
    I did the same with my desktop computer and the result is the same no any lights and no any movement on the motherboard . so now can some one tell me how you can distuingish as a last result which of this 2 components is causing dead PC. is there any
    tool to test the motherboard or how asus,dell ect. they solve such a problem if the customer send to them a dead pc.
    I know that the power supply also can cause dead pc but I know how to solve a problem  with dead power supply. and I want to keep away power supply from this question. please do not tell me that  Idon't have to pull out processor
    because I am a technician and both of my computers are doing very good after this experiment.
    thanks
    johan
    h.david

    Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
    So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
    Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
    Memory can be tested with memory diagnostics programs like Memtest+
    Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
    If the motherboard has no response then do the basics first:
    Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

  • Some Adresses seems to be damaged, Mails does not reach the receipient

    Hi,
    we have following problem with one costumer:
    He is sending invitations from outlook to a notes client behind a domino server. But the receipient gets an damaged invitation. The sender takes the address out of his contacts. If he deletes the contact or he types the address manuell, all seems to be fine.
    The invitation reaches the receipient and can be accepted or declined.
    If you want to look behind a contact and choose preferences, I will get an errror.
    What is the problem? I've often problems with damaged contacts but I can't find something in the web. Can I control and/or repair all contacts at once to prevend such problems?
    Achim

    Hi,
    Do you mean the message cannot be sent completely when some Exchange users directly select their Contact as a recipient? And if users directly type the contact address, there is no issue with sending messages.
    Please close Outlook and send a test message with selecting Contact as a recipient in OWA to check whether the message can be sent completely. If the issue continues in OWA, we can follow Denis’s suggestion to export Contact to an excel / CSV file to tidy
    them up.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • TV Show: Damages and FX Channel don't appear

    I see that the show "Damages" (and the FX Channel) are available in iTunes, but they are not available on AppleTV Menu?
    What gives?  Shouldn't the same content be available on ATV that is available on iTunes?
    ATV is on latest iOS.

    Thank you, but that is not the problem.  Damages is available in both SD and HD.
    However, I think I found my own solution.  Purchasing via iTunes on my mac...it does show up via AirPlay.  What I found interesting is that the entire show must be downloaded before it is "available" under TV Shows.
    I found somewhere on the forums that a lot of TV Shows require a device that can download - as "streaming" is unavailable.  Since ATV2 cannot "download" and can only stream - some shows are not available via the ATV menu but are available via iTunes.
    Problem solved - download via iTunes and Airshare to ATV.
    Thanks for all who have looked.

  • After System Update keyboard doesn't work -MacBook

    Here is what happened and I was able to fix, someway... but not definetly.
    I updated to Snow Leopard and everything was fine. After I launched System Update to finish the update, I installed a few ones then I rebooted.
    At the login I realized that some of the keys didn't work anymore. Namely
    0 = P ] ; \ / ENTER
    those what I found.
    With the help of the virtual keyboard I was able to take a look at the log and I noticed that the /System/Library/Extensions/AppleHIDKeyboard.kext was updated just before the last working configuration...
    Luckily I had a bootable backup of the system before Snow Leopard, so I boot from the external USB drive and copied the old AppleHIDKeyboard.kext in place of the new one, that I saved with .bak extension.
    I rebooted and the keyboard was properly working again.
    I think my fix is "dirty". I experienced some slowdowns here and there and I found a log message stating:
    com.apple.kextcache[271] AppleHIDKeyboard.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
    I'm wondering why the keyboard stopped working and if there is a better way to fix it.
    Any comment? (Please)
    All log messages containig "keyboard" follows
    Thanks
    <START OF LOG MESSAGES CONTAINING "keyboard">
    [[MARKER THIS IS AFTER SNOW LEOPARD UPDATE]]
    16/03/2010 14:47:53 pkgutil[1163] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/CodeDirectory' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/CodeDirectory'.
    16/03/2010 14:47:53 pkgutil[1164] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/CodeRequirements' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/CodeRequirements'.
    16/03/2010 14:47:54 pkgutil[1165] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/CodeResources' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/CodeResources'.
    16/03/2010 14:47:54 pkgutil[1166] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/CodeSignature' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/CodeSignature'.
    16/03/2010 14:47:54 pkgutil[1167] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/Info.plist' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/Info.plist'.
    16/03/2010 14:47:54 pkgutil[1168] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/MacOS/AppleBluetoothHIDKeyboard' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/MacOS/AppleBluetoothHIDKeyboard'.
    16/03/2010 14:47:54 pkgutil[1169] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/Resources/AppleBluetoothHIDKeyboard.plist' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/Resources/AppleBluetoothHIDKeyboard.plist'.
    16/03/2010 14:47:54 pkgutil[1170] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/_CodeSignature/CodeDirectory' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/_CodeSignature/CodeDirectory'.
    16/03/2010 14:47:54 pkgutil[1171] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/_CodeSignature/CodeRequirements' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/_CodeSignature/CodeRequirements'.
    16/03/2010 14:47:54 pkgutil[1172] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/_CodeSignature/CodeResources' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/_CodeSignature/CodeResources'.
    16/03/2010 14:47:54 pkgutil[1173] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/_CodeSignature/CodeSignature' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/_CodeSignature/CodeSignature'.
    16/03/2010 14:47:54 pkgutil[1174] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoot hHIDKeyboard.kext/Contents/version.plist' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleBluetoo thHIDKeyboard.kext/Contents/version.plist'.
    16/03/2010 14:47:54 pkgutil[1175] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/CodeDirectory' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/CodeDirectory'.
    16/03/2010 14:47:54 pkgutil[1176] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/CodeRequirements' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/CodeRequirements'.
    16/03/2010 14:47:55 pkgutil[1177] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/CodeResources' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/CodeResources'.
    16/03/2010 14:47:55 pkgutil[1178] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/CodeSignature' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/CodeSignature'.
    16/03/2010 14:47:55 pkgutil[1179] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/Info.plist' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/Info.plist'.
    16/03/2010 14:47:55 pkgutil[1180] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/MacOS/AppleUSBHIDKeyboard' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/MacOS/AppleUSBHIDKeyboard'.
    16/03/2010 14:47:55 pkgutil[1181] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/_CodeSignature/CodeDirectory' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/_CodeSignature/CodeDirectory'.
    16/03/2010 14:47:55 pkgutil[1182] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/_CodeSignature/CodeRequirements' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/_CodeSignature/CodeRequirements'.
    16/03/2010 14:47:55 pkgutil[1183] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/_CodeSignature/CodeResources' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/_CodeSignature/CodeResources'.
    16/03/2010 14:47:55 pkgutil[1184] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/_CodeSignature/CodeSignature' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/_CodeSignature/CodeSignature'.
    16/03/2010 14:47:55 pkgutil[1185] Updating receipt 'com.apple.pkg.BaseSystem' path 'System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDKe yboard.kext/Contents/version.plist' on '/' with actual metadata from '/System/Library/Extensions/AppleHIDKeyboard.kext/Contents/PlugIns/AppleUSBHIDK eyboard.kext/Contents/version.plist'.
    [[MARKER NOW I REBOOTED AND THE KEYBOARD DID NOT WORK]]
    16/03/2010 17:24:43 /System/Library/Input Methods/KeyboardViewer.app/Contents/MacOS/KeyboardViewer[313] CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
    16/03/2010 17:55:06 /System/Library/Input Methods/KeyboardViewer.app/Contents/MacOS/KeyboardViewer[337] CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
    [[MARKER NOW I WILL TRY TO INSTALL A FIRMWARE UPDATE, BUT IT WILL STATE THAT MY SYSTEM DOESN'T NEED IT. SO NOTHING DONE]]
    16/03/2010 21:27:26 /System/Library/Input Methods/KeyboardViewer.app/Contents/MacOS/KeyboardViewer[433] CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
    16/03/2010 21:33:37 Installer[462] Opened from: /Volumes/MacBook MacBook Pro Keyboard Update/MacBookMacBookProKbdSU.pkg
    16/03/2010 21:36:52 /System/Library/Input Methods/KeyboardViewer.app/Contents/MacOS/KeyboardViewer[490] CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
    17/03/2010 07:13:25 /System/Library/Input Methods/KeyboardViewer.app/Contents/MacOS/KeyboardViewer[662] CGSKeyTranslateInitialize: KLGetCurrentKeyboardLayout or KLGetKeyboardLayoutProperty is not available, fall back to USA keymap
    [[MARKER AND HERE IS AFTER I RESTORED THE OLD AppleHIDKeyboard.kext...]
    17/03/2010 07:44:23 com.apple.launchd.peruser.502[182] ([0x0-0x60060].com.apple.KeyboardViewer[662]) Exited: Killed
    17/03/2010 08:21:55 com.apple.kextcache[271] AppleHIDKeyboard.kext does not declare a kernel dependency; using com.apple.kernel.6.0.
    <END OF LOGS>

    It is never a good idea to mix system components like kext's from different OS X versions. If you right-click on for instance the AppleHIDKeyboard.kext & choose "Show contents" you will see that it is a bundle composed of many individual files. Many of these files contain information about files in other OS bundles. Similarly, other OS bundles may contain info about the files in this bundle. This tells the OS what +set of files+ it can & can't use for various functions.
    IOW, kext's are not self-contained, functionally independent items. When you replace one with one from a different OS version, its info about other files usually won't be right. This can & very often does cause problems. Some are minor but others can cause progressively greater problems, eventually damaging the OS enough that it becomes inoperative.
    So, your fix is almost certainly "dirty."
    It's also not addressing the source of the problem. There is nothing wrong with Snow Leopard's AppleHIDKeyboard.kext file (version 1.2.0). Snow Leopard works perfectly well with my & thousands of other users' MacBooks. The cause of your problem could be many things, but this is not one of them. If you can accept that, there are several things you can do to find the cause, starting with running the Apple Hardware Test to see if it finds up any problems with your MacBook.

  • Nvidia 8600M GT GPU issues - please explain

    what is this exactly? well, whatever it is, someone told me this is why my MBP is in shop right now! screen went totally black lastnight with the computer running fine and normal. if this Nvidia thing is truly the problem and damaged, is this a big deal to fix? will i lose all my HD info during the repair? i dont know enough about the interior of my MBP to understand what this is exactly, so please help me. seems my 1year warranty should cover the repairs,but this is ridiculous. not even a year, and my $2800 machine shut down. my baby
    just found this:
    http://apple.slashdot.org/article.pl?sid=08/10/11/1518246&from=rss
    Message was edited by: Carmine Matarazzo

    I had the GPU on my MacBook Pro fail, sent it into Apple late last year , they must have replaced all the guts of the computer because the hard drive was wiped of my data. Luckily I had it backed-up via Time Machine so was able to restore it.
    Since I figured it would probably fail again I bought the extended AppleCare plan. This past week it failed again, exact same problem. It's now in a local shop being repaired under AppleCare. Not sure if the hard drive will get wiped again.
    I expect it to fail again in the future as the problem appears inherent in the Nvidia GPU model. Apple can't seem to identify which parts will work or fail or I wouldn't have gotten a faulty GPU part installed as a fix. I hope I'm wrong as this is a hassle to deal with as my MBP is my workhorse computer, now I'm on a Windows machine as a workaround. This is really frustrating.

  • Nvidia 8600M GT GPU (no clue what this thing is) issues - please explain

    what is this exactly? well, whatever it is, someone told me this is why my MBP is in shop right now! screen went totally black lastnight with the computer running fine and normal. if this Nvidia thing is truly the problem and damaged, is this a big deal to fix? will i lose all my HD info during the repair? i dont know enough about the interior of my MBP to understand what this is exactly, so please help me. seems my 1year warranty should cover the repairs,but this is ridiculous. not even a year, and my $2800 machine shut down. my baby
    just found this:
    http://apple.slashdot.org/article.pl?sid=08/10/11/1518246&from=rss
    Message was edited by: Carmine Matarazzo

    Nvidia is a manufacturer of graphics chips and one of Apple's many suppliers. The chip will be attached to your logic board and has to do with graphics and the display. If the chip is defective and fails, Apple will replace the logic board under warranty. This should not in any way affect your hard drive, which is an entirely different component and is NOT physically attached to the logic board. Rather, it is connected by a cable which can be unplugged.
    The reality of manufacturing is that despite all precautions, defective parts are occasionally produced which end up getting incorporated into things--even very expensive things. It's unfortunate, but it happens.
    Your one year warranty should certainly cover the cost of the repair. You might want to consider getting 3 year Applecare.
    You might be able to access your hard drive using another Mac and Firewire Target Disk Mode. If so, it would be wise to make a backup of your hard drive before sending your Mac off for repairs. If you have access to an Apple Store, they should be able to help you to do this. They might also be able to replace the logic board for you.
    Your hard drive should not be affected by replacing the logic board, but there is always the possibility that the entire MBP will be examined, and if someone thinks the hard drive should be replaced, it probably would be. So be sure to make a backup of your entire hard drive before sending it off.
    Good luck!

  • T.code ME55

    Hi Experts ,
    I want to know where exactly the ALV GRID DISPLAY Function Module has been called in the program of T.code ME55(RM06BF00) , Actually my requirement is to add one more field (available stock of the material ) in the ALV Output of the T.code ME55 . I tried to find the field catalogue in the prog. RM06BF00 , but could'nt find it anywhere in the prog. Then I copied the prog. into a Z Report and after executing the Z report in the Selection screen I entered Release Code = G3 and Scope of List = ALV .
    But an exit message comes saying ' Scope of list ALV not defined (please correct)' . However for another scope of list it is coming . Plese help .
    Thanks ,
    Suvendu

    *& Report  ZBREAKDOWN
    REPORT  ZBREAKDOWN NO STANDARD PAGE HEADING..
    tables: CRHD, QMEL, QMFE, QMIH, QMUR, TQ80_T, TQ15T, QPGT, QPGR, t001w.
    type-pools slis.
    data : it_list type slis_t_listheader with header line,
           gt_evnt type slis_t_event with header line.
    data : begin of outstand_wa occurs 0,
    ********Work Center Header
    OBJTY       LIKE CRHD-OBJTY    ,  " Object types of the CIM resource
    OBJID       LIKE CRHD-OBJID    ,  " Object ID of the resource
    ARBPL       LIKE CRHD-ARBPL    ,  " Work center
    WERKS       like CRHD-WERKS    ,  " Plant
    VERWE       LIKE CRHD-VERWE    ,  " Work center cat.
    VERAN       LIKE CRHD-VERAN    ,  " Person responsible for the work center
    *********Quality Notification
    CROBJTY     LIKE QMEL-CROBJTY  ,  " Object types of the CIM resource
    ARBPLn      LIKE QMEL-ARBPL    ,  " Object ID of the Work Center
    QMNUM       LIKE QMEL-QMNUM    ,  " Notification No
    QMART       LIKE QMEL-QMART    ,  " Notification Type
    QMTXT       LIKE QMEL-QMTXT    ,  " Short Text
    QMDAT       LIKE QMEL-QMDAT    ,  " Date of Notification
    AUFNR       LIKE QMEL-AUFNR    ,  " Order Number
    **********Notification type texts
    QMARTX      LIKE TQ80_T-QMARTX ,  " Notification Type Texts
    *********Quality notification - items
    FEKAT       LIKE QMFE-FEKAT    ,  " Catalog Type - Problems/Defects
    FEGRP       LIKE QMFE-FEGRP    ,  " Code Group - Problem
    FECOD       LIKE QMFE-FECOD    ,  " Problem or Damage Code
    OTKAT       LIKE QMFE-OTKAT    ,  " Catalog Type - Object Parts
    OTGRP       LIKE QMFE-OTGRP    ,  " Code Group - Object Parts
    KOSTL       LIKE QMFE-KOSTL    ,  " Cost Center
    FETXT       LIKE QMFE-FETXT    ,  " Notification Item Short Text
    ERNAM       LIKE QMFE-ERNAM    ,  " Name of Person who Created the Object
    ERDAT       LIKE QMFE-ERDAT    ,  " Date on Which Record Was Created
    AENAM       LIKE QMFE-AENAM    ,  " Name of Person Who Changed Object
    AEDAT       LIKE QMFE-AEDAT    ,  " Changed On
    *****Inspection catalog type index
    SPRACHE     LIKE TQ15T-SPRACHE    , " Language Key
    KATALOGART  LIKE TQ15T-KATALOGART , " Catalog
    KATALOGTXT  LIKE TQ15T-KATALOGTXT , " Catalog Text
    **********Code group texts
    CODEGRUPPE  LIKE QPGT-CODEGRUPPE  , " Code Group
    KURZTEXT    LIKE QPGT-KURZTEXT    , " Short Description of the Code Group
    **********Inspection catalog code groups
    *KURZTEX     LIKE QPGR-KURZTEXT    , "
    *********Quality message - maintenance data excerpt
    MSAUS       LIKE QMIH-MSAUS    ,  " Breakdown Indicator
    AUSVN       LIKE QMIH-AUSVN    ,  " Start of Malfunction (Date)
    AUSBS       LIKE QMIH-AUSBS    ,  " End of Malfunction (Date)
    AUZTV       LIKE QMIH-AUZTV    ,  " Start of Malfunction (Time)
    AUZTB       LIKE QMIH-AUZTB    ,  " End of Malfunction (Time)
    AUSZT       LIKE QMIH-AUSZT    ,  " Breakdown Duration
    INGRP       LIKE QMIH-INGRP    ,  " Planner Group for Customer Service and Plant Maintenance
    *********Quality notification - causes
    URTXT       LIKE QMUR-URTXT    ,  " Cause Text
    URKAT       LIKE QMUR-URKAT    ,  " Catalog Type - Causes
    URGRP       LIKE QMUR-URGRP    ,  " Code Group - Causes
    URCOD       LIKE QMUR-URCOD    ,  " Cause Code
    *********Person responsible for the work center
    KTEXT       LIKE TC24-KTEXT    ,  " NAME OF THE PERSON RESP.
    *****Plants/Branches
    stras       like t001w-stras   ,
    pstlz       like t001w-pstlz   ,
    adrnr       like t001w-adrnr   ,
    ort01       LIKE t001w-ort01   ,
    BIND(3),
    KATALOG(40),
    ddiff TYPE  p,
    tdiff TYPE  p DECIMALS 2,
    d3 type p,
    t3 type minutes,
    m_break type sy-uzeit,
    t4(16) type p,
    t6 type sy-tabix,
    t7 type swl_pm_cvh-duration,
    t5 type swl_pm_cvh-duration,
    end of outstand_wa.
    *data : outstand_hd type standard table of  outstand_wa initial size 0 with header line.
    data : tab_etab type standard table of etab,
           wa_etab type etab.
    DATA: is_layout TYPE slis_layout_alv.
    DATA: M_TIME TYPE SY-UZEIT VALUE 24.
    data: l_start     type t,
          l_end       type t,
          l_startdate type d,
          l_enddate   type d,
          l_hours     type p decimals 2.
    *DATA :  DATE1 TYPE SY-DATUM,
           TIME1 TYPE SY-UZEIT,
           DATE2 TYPE SY-DATUM,
           TIME2 TYPE SY-UZEIT.
    selection-screen begin of block plant with frame title text-001.
    select-options : m_plant for CRHD-WERKS obligatory .  " Plant
    select-options : m_work  for CRHD-ARBPL .             " Work center
    select-options : m_catg  for CRHD-VERWE .             " Work center cat.
    select-options : m_pern  for CRHD-VERAN .             " Person responsible for the work center
    select-options : m_type  for QMEL-QMART .             " Notification Type
    select-options : m_date  for QMEL-QMDAT obligatory.   " Date of Notification
    select-options : m_ordr  for QMEL-AUFNR .             " Order Number
    select-options : m_cost  for QMFE-KOSTL .             " Cost Center
    selection-screen end of block plant.
    selection-screen begin of block radi with frame title text-004.
    *parameters list      radiobutton group rad1.
    parameters grid      radiobutton group rad1.
    parameters alv       radiobutton group rad1.
    selection-screen end of block radi.
    data: fieldcat type slis_t_fieldcat_alv .
    select CRHDOBJTY   CRHDOBJID CRHDARBPL CRHDWERKS CRHDVERWE CRHDVERAN
           QMELCROBJTY QMELARBPL QMELQMNUM QMELQMART QMELQMTXT QMELQMDAT QMEL~AUFNR
           TQ80_T~QMARTX
           QMFEFEKAT   QMFEFEGRP QMFEFECOD QMFEOTKAT QMFEOTGRP QMFEKOSTL QMFEFETXT QMFEERNAM QMFEERDAT QMFEAENAM QMFE~AEDAT
           TQ15TSPRACHE TQ15TKATALOGART TQ15T~KATALOGTXT
           QPGTCODEGRUPPE QPGTKURZTEXT
           QMIHMSAUS   QMIHAUSVN QMIHAUSBS QMIHAUZTV QMIHAUZTB QMIHAUSZT QMIH~INGRP
           QMURURTXT   QMURURKAT QMURURGRP QMURURCOD
           TC24~KTEXT
           T001WSTRAS  T001WPSTLZ T001WADRNR T001WORT01
    into table outstand_wa
         from CRHD
    INNER JOIN QMEL   ON CRHDOBJID = QMELARBPL
    INNER JOIN QMFE   ON QMELQMNUM = QMFEQMNUM
    INNER JOIN QMIH   ON QMFEQMNUM = QMIHQMNUM
    INNER JOIN QMUR   ON QMIHQMNUM = QMURQMNUM
    INNER JOIN TC24   ON CRHDVERAN = TC24VERAN
    INNER JOIN T001W  ON CRHDWERKS = T001WWERKS
    INNER JOIN TQ80_T ON QMELQMART = TQ80_TQMART
    INNER JOIN TQ15T  ON QMFEFEKAT = TQ15TKATALOGART
    INNER JOIN QPGT   ON QMFEFEGRP = QPGTCODEGRUPPE
    WHERE CRHDWERKS IN m_plant AND CRHDARBPL IN m_work AND CRHDVERWE IN m_catg AND CRHDVERAN IN m_pern
    AND QMELQMART IN m_type AND QMELAUFNR IN m_ordr AND QMFEKOSTL IN m_cost AND TQ15TSPRACHE = 'E' AND QMEL~QMDAT IN m_date.
    *AND QMEL~QMDAT IN m_date
    **AND CRHDARBPL IN m_work AND CRHDVERWE IN m_catg AND CRHD~VERAN IN m_pern
    **AND QMELQMART IN m_type AND QMELQMDAT IN m_date AND QMELAUFNR IN m_ordr AND QMFEKOSTL IN m_cost AND TQ15T~SPRACHE = 'E'.
    *AND QPGTCODEGRUPPE = QMFEOTGRP.
    if sy-subrc = 0.
    LOOP AT outstand_wa.
      if outstand_wa-MSAUS = 'X'.
         outstand_wa-BIND = 'YES'.
         modify outstand_wa transporting BIND.
      endif.
      if outstand_wa-MSAUS = ' '.
         outstand_wa-BIND = 'NO'.
         modify outstand_wa transporting BIND.
      endif.
    if outstand_wa-URKAT = '1'.
       outstand_wa-KATALOG = 'Characteristic Attributes'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = '2'.
       outstand_wa-KATALOG = 'Tasks'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = '3'.
       outstand_wa-KATALOG = 'Usage Decisions'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = '4'.
       outstand_wa-KATALOG = 'Events'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = '5'.
       outstand_wa-KATALOG = 'Causes'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = '6'.
       outstand_wa-KATALOG = 'Results of Defects'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = '8'.
       outstand_wa-KATALOG = 'Activities(QM)'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = '9'.
       outstand_wa-KATALOG = 'Defect Types'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = 'A'.
       outstand_wa-KATALOG = 'Activities(PM)'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = 'B'.
       outstand_wa-KATALOG = 'Object Parts'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = 'C'.
       outstand_wa-KATALOG = 'Overview of Damage'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = 'D'.
       outstand_wa-KATALOG = 'Coding'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = 'E'.
       outstand_wa-KATALOG = 'Defect Locations'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = 'F'.
       outstand_wa-KATALOG = 'Decision(SPM Returns)'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = 'G'.
       outstand_wa-KATALOG = 'Defect(SPM Returns)'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = 'H'.
       outstand_wa-KATALOG = 'Effort(SPM Returns)'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    if outstand_wa-URKAT = 'I'.
       outstand_wa-KATALOG = 'Follow-Up Activity(SPM Returns)'.
       MODIFY outstand_wa TRANSPORTING KATALOG.
    ENDIF.
    ENDLOOP.
    ENDIF.
    IF outstand_wa-MSAUS = 'X'.
    BIND = 'YES'.
    ELSEIF outstand_wa-MSAUS = '  '.
    BIND ='NO'.
    ENDIF.
    *ENDLOOP.
    *ENDIF.
    case 'X'.
        WHEN LIST.
        PERFORM SIMPLE_LIST.
      when grid.
        perform writ_list.
        perform calculation.
      when alv.
        perform writ_alv.
        perform calculation.
       DATA: layout TYPE slis_layout_alv.
       PERFORM build_field_catalog.
       CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
         EXPORTING
           is_layout              = layout
           it_fieldcat            = fieldcat
           i_callback_top_of_page = 'TOP_OF_PAGE'
           it_events              = gt_evnt[]
         TABLES
           t_outtab               = outstand_wa.
    endcase.
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    *form build_layout.
    gd_layout-no_input          = 'X'.
    gd_layout-colwidth_optimize = 'X'.
    gd_layout-totals_text       = 'Totals'(201).
    *gd_layout-totals_text       = 'Totals'.
    Set layout field for row attributes(i.e. color)
    gd_layout-info_fieldname =      'LINE_COLOR'.
    gd_layout-totals_only        = 'X'.
    gd_layout-f2code            = 'DISP'.  "Sets fcode for when double
                                            "click(press f2)
    gd_layout-zebra             = 'X'.
    gd_layout-group_change_edit = 'X'.
    gd_layout-header_text       = 'helllllo'.

  • Error -50 when using an external editor

    Having finally graduated from iPhoto 2, I found some "interesting" behavior in iPhoto '08...
    iPhoto objected when I tried to save an externally edited photo back into its slot in iPhoto -- nothing lost, just an error dialog and the edits were not applied. Since it was repeatable, it made me curious.
    When you choose external editor to edit a photo in iPhoto 8, the first thing iPhoto does is stash a copy of the original (and activates the "Revert to Original" menu item for that photo). Just editing in iPhoto 8 doesn't do any of this until you accept the changes -- that's an important distinction, because if you change your mind with the external editor (and make no edits, or cancel them without saving), that stashed copy stays in the "modified" folder.
    For all practical purposes, it's "forgotten" unless you happen to choose "Revert to Original", in which case, the extra photo is unceremoniously purged. Now, if you don't think about purging that forgotten copy and later decide that you actually do want to edit that photo in an external editor after all, iPhoto will again stash a copy while your external editor is opening. It gets stashed in the same folder that already has the previously stashed (and forgotten) image file. If the file were overwritten, there would be no big problem, but it does not get overwritten, and you can't have two files with the same name in the same folder. So the finder appends a "_1" to the end of the file name -- and THAT sets up the problem. When you finish editing and save the file back to iPhoto, you will be (unintentionally) trying to add a file to your collection that iPhoto doesn't know about. The filename change to avoid a conflict in the folder is not reflected in the iPhoto 8 database.
    Older iPhoto versions would have let that pass (and that's why there were always problems with database corruption), but the newer version catches the attempt and simply doesn't allow the save to take place.
    That's the "why it happens", but it's only my second day with iPhoto '08 and I'll need a little more time to work out how to selectively fix the problem without damaging the database -- a database rebuild does not purge those stashed photos (and you wouldn't want it to because most of them are the originals for photos that were actually modified).

    Brie Fly:
    I tried to replicate that using Photoshop and could not. When starting an edit with PS a file is created and remains is I abort the edit in PS. However, if I edit again with PS and save the original modified file is changed with no other file being created.
    What 3rd party editor are you using? The only time I get a _1 file is when I move a file to an event that has the same file name as a file already in that event.
    What system are you running and are you at iPhoto 7.1.1, iLife Support 8.1.1 and Quicktime 7.3?
    Happy Holidays
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Can't Repair Disk. Format needed?!

    Hi, I Have the black macbook i got about 2 years ago. just recently whenever i use anything like finder, firefox or even safari i would get the hanging balloon thing for a long time. Good thing i have bootcamp with windows 7 or else my computer with out totally out of use. I've tried booting from a snow leopard dvd and ran disk utilities but it says disk can't be repaired and i have to format. So my question is there a fix for the hanging? so if i really have to format am i able to save my windows 7 bootcamp, and just format the osx?

    I've tried booting from a snow leopard dvd and ran disk utilities but it says disk can't be repaired and i have to format.
    What does Disk Utility say is the problem? There should be some indication of this in the log or in the First Aid window if you have "Show Details" checked.
    As others have suggested, there are more powerful disk repair utilities than Disk Utility on the market. Disk Warrior is considered by many to be the best single-purpose one; TechTools Pro is another favorite. But be advised that there is no guarantee these utilities will repair the problem -- some damage is too extensive even for them to repair.
    If you do a full reformat of the drive (this is done from the "Partitions" tab in Disk Utility), you will erase all partitions, both the OS X & Boot Camp/Windows ones. If this is required, you must backup each partition separately. SuperDuper! is excellent for cloning OS X partitions; some Windows utility may be better for the Windows one.
    However, if the damage is just to the file system of the OS X partition but does not extend to the partition scheme of the drive, you will just need to erase & set the file system format of the OS X partition (this is done from the "Erase" tab in Disk Utility) to recover. This will still erase the OS X partition, so you must still back it up, but it should leave the Windows partition untouched.
    As an aside, you should always have a good backup strategy for everything you can't afford to lose, whether on the OS X or Windows side.

Maybe you are looking for

  • IMac no longer connects to Wi-Fi on startup or after manual sleep

    Hello folks, I need some suggestions. Here is a description of the problem (as brief as possible): My late '09 21.5" iMac spur-of-the-moment didn't connect to my wireless network on a random day (2 or so weeks ago). I thought nothing of it, until I n

  • Reference to parent record in Tree view

    Dear Jheadstart Team, When creating a Tree which I intend to use to insert child records, it is indeed possible to insert these records, unfortunately the key that identifies the relationship with the parent (in the child record) is always set to nul

  • RoboHelp Search Engine doesn't work properly in Mac browsers

    On a Mac, the Search engine actually lists every single number and word that has been indexed by the search engine, and to the right of each word it posts the number of times that word appears in the project. But it doesn't let you type a word to sea

  • Form name in SPRO

    I have to see the form name which is used for indent.Where in SPRO, it is present?

  • Can anyone clarify my doubt in a simple JSP Program ?

    when we write a simple jsp program such as helloworld.jsp does a class file or servlet be created when we run the jsp program using a web browser and Tomcat ? if so please tell the folder(path) in tomcat where this class file will be located or store