Problem Publishing to FTP site-I think it has something to do with encoding

When I publish to my ftp server, the pages all get messed up. Titles get codes inserted into them (ï¿¼ is always inserted), special characters I have inserted into the text get messed up (like apostrophes, bullets, etc. etc.) It's a royal mess. I end up having to go in and fix it all by hand, which takes WAY more time than just coding the page by hand; I chose to try iWeb because I thought it would be easier and faster. It ends up being much slower!
You can see the site here: http://www.yorku.ca/earmstro/glossonomia
I had the site all fixed up, using a 3rd party ftp client to upload, but thought "hey maybe if I upload through iWeb, it will get fixed" and I messed up the whole site again. I'm feeling like I should just give up and start again by hand. This is just not worth it. Argh.
Any help will be appreciated.

Your server is misconfigured to force all browsers to use the wrong encoding. For fixes see the Server Settings section of
http://homepage.mac.com/thgewecke/iwebchars.html

Similar Messages

I have a frustrating problem with my iPhone 5 post ios8 installation. The ring tone won't sound when phone is locked/switched off, although the vibration does work. I think it has something to do with "do not disturb"

Hi, I have a frustrating problem that seems to have occurred post iOS 8 installation. When my iphone5 is switched off the ring tone fails to sound i only get the vibration. If i am using my phone and a have an incoming call then the ring tone works as normal. I think it has something to do with "do not disturb" ... i see from the menu in "do not disturb" that under the heading "silence" there are two options "always" and "only when the phone is locked" This does not seem to make sense as i have to choose one or the other!
If anybody can help advise me on this problem i would be very grateful.
Thanks

Hello Mogulman46,
So what that means is when you have Do Not Disturb turned on, you may have an alert depending on the setting and how you are using your iPhone. So if it is set to Always, then that means that no matter what, your iPhone will not be notified. If it set to Only while the iPhone is locked, then that means that you will not get notification when your iPhone is locked but you will get notifications if your iPhone is being used. Also keep in mind the settings All Calls From can be set to certain contacts like Favorites, Everyone or no one. If you are using Do Not Disturb and you do not need it, then turn it off.
Use Do Not Disturb on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5463
Regards,
-Norm G.

When I turn my computer on I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. I think this has something to do with Apple "push". I had a problem with this in iTunes when I tried to sync my iPod Touc

When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. The change has something to do with Apple "push". I recently had a problem with"push" on iTunes when I tried to sync my iPod Touch. I have latest software for iTunes and iPod. Can anyone tell me what to do to get this change to install?

ptford wrote:
When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware
Since hardware cannot be changed with software, perhaps you would be so kind as to post the exact wording of the message?

I installed 10.6.8 from 10.6.6 on my Macbook Pro and now can't open Safari-think it's something to do with the Intego anti-virus software. Reverted Intego software back to default state and now computer just boots ups up slowly and can't access a thing.

I installed 10.6.8 from 10.6.6 OS on my MacBook Pro and have not been able to open secure sites on Safari. Think it has something to do with the Intego Anti-virus installed. Tried restoring Intego to default status and now my Mac barely boots up and does nothing else but spin. Ugh. Has anyone had similar issues and if so, were you able to resolve? How? Thanks,

1: Backup your user files folders of Documents, Music, Pictures etc., to a external powered drive (not TimeMachine) and disconnect.
2: Insert the 10.6 installer disk and reboot holding c
3: Simply reinstall OS X without erasing the drive, it will overwrite the installed version of OS X and the root level software, but leave your Applications folder contents (expect Apple bundled programs) and user files alone. (but backup anyway in case it fails)
4: Reboot and the Integro is gone out of your system, but there may still be something laying around in Applicaitons to delete. Use Software Update to get up to date.
5: You don't need anti-virus on a Mac, Apple provides it already for you sight unseen.
6: If you Software update, the bad certificate issues are pulled, thus are not a threat.

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple s

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple store from debug menu, double checked my apple id account and etc..but doesn't work anyway.

I'm having the same problem and went as far as to delete and reinstall the AppStore and still no dice.

I upgraded my 3rd gen iTouch to iOS 5.1.1 and now its speed to repond is slower and the battery goes flat quicker than before the upgrade. Skype, Sky iCloud and other apps are turned off (I think). Has anybody else suffered with this? Any ideas?

I upgraded my 3rd gen iTouch to iOS 5.1.1 and now its speed to repond is slower and the battery goes flat quicker than before the upgrade. Skype, Sky iCloud and other apps are turned off (I think). Has anybody else suffered with this? Any ideas?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

I've just changed my router and whilst my laptops sync ok, my G4 tower which connects via an airport express doesn't connect to the internet. I think it's something to do with the IP or DHCP settings but have had no success, any help much appreciated.

Hi Jake,
Is it connecting to the Router or Modem?
Is the new Router using maybe WPA2 encryption? If so, G4s can only do WPA or less.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
old... http://docs.info.apple.com/article.html?artnum=106653
Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
The Interface that connects to the Internet, needs to be drug to the top of System Preferences>Network>Show:>Network Port Configurations and checked ON.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
Then... Try putting these numbers in Network>Airport>TCP/IP>DNS Servers, for the Interface you connect with...
208.67.222.222
208.67.220.220
Then Apply.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6

Problem publishing my iWeb site to new server

I have a problem publishing my site to a new server HostGator.
I click publish, everything continues normally, then I get an ERROR notice:
Publish Error
There was an error communicating with the FTP server.
Try again later, or check with your service provider
Since I changed the settings for the new server all the iWeb pages symbols go pink every time I close and reopen iWeb. Once I have tried to publish and get the ERROR notice I see that most of the pages have turned blue (suggesting they have been correctly published) and the same 5 pages remain pink (suggesting they have not been published) I have used the HostGator link
http://gator694.hostgator.com/~carouge1/carouge-art/Welcome.html
to look at the uploaded pages.
All the pages are on their server file BUT the pages which remain pink on iWeb have problems. These problems (missing photos etc.) don't seem to affect the pages when the site is called up normally. The site is apparently still being uploaded to people’s computers through MobileMe eventhough I have changed the server settings! So I’m assuming the page problems will show up after MobileMe stops at the end of this month? I cannot find an explanation for the failed pages from HostGator or from the Apple online answers.
Grateful for any advice.

I am having a similar problem trying to upload from iWeb through FTP to MacHighway web hosting.
I am using iWeb 3.0.4, the latest version.
I have followed the instructions on the MacHighway site: https://customers.machighway.com/knowledgebase.php?action=displayarticle&id=10
When I type "public_html" into Directory/Path window in iWeb I get the following message:
Testing failed.
The directory/path couldn't be found. Verify your settings and try again.
When I type "/public_html" or /public_html/" into Directory/Path window in iWeb I get the following message:
Testing failed.
A connection to mel.machighway.com couldn't be established. Verify your settings and try again.
Unlike carougeart, however, nothing gets uploaded.

How to publish to FTP site NOT mobile me???

how do i publish the site to an FTP site that is hosting for me? i don't have mobile me and dont want it if i don't have to. please help. thanks!

As you have posted this in the iWeb 08 forum I am assuming that you are using iWeb 08 which does not have a built in ftp to server option.
In iWeb 08 you need to select the publish to a folder option and your site will be published to your Home Sites folder - there will be an index file, plus the Site folder of the same name that you named your site in iWeb.
Next you need to download Cyberduck free from the internet - this is a dedicated ftp program that you use to upload your files to your server. Open Cyberduck and enter your host, username and password details to connect with your host and then upload both your Site folder and your index.html file to your server. Your Site folder needs to be placed in the public_html folder on your server or whichever folder your server requires you to upload to. The index file needs to sit outside this folder to point into it.

Iweb publishing free ftp sites

What free FTP sites can I use to publish my iweb document?

This one has a free version...
http://www.000webhost.com
You need to add this line to the .htaccess file to get it to work...
php_flag short_open_tag off
Otherwise, if your are new to FTP, you may be better off with paid hosting to get better service and tech support...
http://www.iwebformusicians.com/iWeb/Website-Hosting.html

I am unable to publish to FTP site or Folder ... errrrrr

I am getting very frustrated! I can publish just fine to Mobleme but I have another site that I publish to an SFTP site which worked fine at first. I upgraded to the 10.6.2 and was getting a SFWordProcessing plug in problem.. I fixed that and all was working fine.
BUT THEN I went to add to my blog and the Entries were listed but no pages showing. I couldn't fix it so I then created a new blog and started over and deleted the old one. I tried publishing it to FTP and got a publishing error. I tried publishing it to local folder (desktop) and it got an unknown publishing error.
I need help immediately!!!! I've called the help line and they haven't gotten back with me yet.

Try the troubleshooting steps under "Fix iWeb" here.....
http://www.iwebformusicians.com/WebMusic/iWebTips.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

I cannot use itunes with windows 7. I think the problem has something to do with the fact that a 32 bit xp version was loaded on my machine. I can't uninstall it and the 64 bit version will not install.

I cannot use tunes with windows 7. A 32 bit xp version was loaded from my prior computer. It will not uninstall. The 64 bit version will noit install.

I cannot use tunes with windows 7. A 32 bit xp version was loaded from my prior computer. It will not uninstall. The 64 bit version will noit install.

Facebook and 1 other site comes up so small I can not see it. Works in Google so it has something to do with firefox I am guessing

2 website are coming up with really small print and pictures can not see one the other is getting worse facebook is one the other is the url below. They are not doing this when I use google chrome

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages

Does the iphone 4 work with Ford SYNC? I recently lost all my contacts and think it had something to do with SYNC. Any suggestions?

Anybody else had problems with Ford SYNC and iphone 4?
Lost all my contacts. Any way to recover them if they haven't been backed up?

The complaints I've heard most are due to the fact that the iPhone will not let you use the sync system to read and compose text messages, etc. I vaguely recall somthing about address books not syncing properly, but I've never heard of the sync system wiping the address book on the phone. It shouldn't be possible as the iPhone only supports PBAP for contact syncing, which is one way.
In any event, if the contacts were not synced to something and have been lost, there is no way to recover them, no matter what it was that wiped them.

I cannot get my apps to sync. This happened with a previous iPhone 3gs. I think it had something to do with error message 6. Could there be some settings on my computer that are causing the conflict? I WANT to use my apps!!

I can't get my apps to sync on my new iPhone 3gs. This happened on a previous iPhone and never was resolved. Could there be a conflict with some settings on my computer? I want to use my apps!!!

Click 6 here > iOS: Resolving update and restore alert messages
Could be your security software preventing the sync to finish.

Problem Publishing to FTP site-I think it has something to do with encoding

Similar Messages

Maybe you are looking for