Problem receiving message. 1 of 3 indicated but only receive first and restart Thunderbird and it will resend the first of 3 again.
Have been having trouble receiving messages. An indication of 1 of 3 messages being loaded. The first message comes up and that's the end. I'll restart Thunderbird and the same indication happens - the same first message returns and then that is it. If you send me an email, I doubt whether I will be able to receive it.
dmr
* http://kb.mozillazine.org/New_messages_do_not_appear
* https://support.mozillamessaging.com/en-US/kb/problems-sending-and-receiving-messages
Similar Messages
-
Since installing iOS 6, I have had problems receiving calls and messages. Calls go straight to answerphone and messages do not appear until I switch off and on again. I have also installed iOS 6.1.1
Try a reset. Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons. This should not affect any content on the iPad, it is similar to rebooting your computer.
-
I am fed up with Spring and Apple passing me off to one another and neither will fix the problem. I am unable to receive a connection on my phone.
The internet goes out and I have to reset network setting each and every time. This is only a temporary solution which by the time I release the line with Spring or leave the apple store the issue is back. Sprint indicates that it is a know issue with the Iphone 5 and apple says it is a network issue as Sprint's network is not up to par with the Iphone and can not meet the expectations on the Iphone 5.
I have attached a few picture, as you can see it clearly says I have 5 bars and 3g available but I have no connections what so ever.
This issue affects all data and so I can not send or receive picture messages, use apps, or access the internet. The data goes in and out intermittently and it seems the phone chooses what I can and can't do.
For example I can watch Youtube or Vevo videos but I can not access Facebook or Instagram.
Is anyone else having this issue?
I will soon loose my patience....
I have reset my phone three time and have reset network and other setting mutltiple times. -
My Acrobat 8 Pro is failing to print to a pdf from multiple software. I get an error message that a repair fixes but only for a little while. Pretty soon the trial version of 9 that I installed pops up telling me it has expired but it would take me to a way to buy a valid serial number and then 8 stops working again. I’d be happy if the 8 I paid for worked right or I could get 9 for a small cost but I cannot afford $450 or $20/month. I need a permanent solution that I should be already paid for with 8 pro.
After multiple repair procedures with reboot in AA8 I was eventually able to restore the printing to pdf function from various software. However I have again lost my Acrobat tab in Outlook 2007. I need that back, but today an even bigger problem arose. AA8 has stopped printing to fax. It faxes a blank page. The only fax printing option is “Microsoft Shared Fax Driver”. My fax software is “Windows Fax and Scan” and it was working fine just a couple weeks ago. My OS is Windows 7 Professional.
I have tried doing the updates you referred to but I get error messages like these:
“No qualifying products found to apply this update, or update has been already applied”
or
“The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing , or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch.” -
Problems Receiving Emails and some data on WIFI since latest software update.
Problems Receiving Emails and some data on WIFI since latest software update.
My blackberry torch will not receive emails on wifi since the latest software update, I've tried numerous wifi networks and several handsets, even had them replaced and received a brand new. Still the same problem.
When turning off the wifi network on the torch, the phone will stall for 5-10min while it tries to communicate with the network (vodafone) to receive outstanding emails and data.
Can someone please inform Blackberry and get a quick fix on thisSounds like you have Do NOt Disturb turned on.
settings - do not disturb - off -
Can a .mov file be recovered if the record was accidentally shut down from loss of power? i was recording from the AJA Pro Ki when we lost power, the file is there but it wont play and comes up with the message, "The document “SC1ATK63.mov” could not be opened. The movie is not in a format that QuickTime Player understands."
Hi,
Troubleshooting a start up script can be difficult. There are some third party programs that also keep logs of start up programs, however for Firefox this may be different.
Is Firefox a startup program? [http://www.winxptutor.com/msinfo32.htm]
Its also possible to check the Web developer tools for any scripts in a page: [https://developer.mozilla.org/en-US/docs/Tools/Debugger]
In the control panel there is also Administrative tools to view event logs, but this may be something a local technician can walk you through. -
I am having trouble sending emails, I can receive them and access safari. The error message I am getting is "the recipient 'persons email address' was rejected by the server. I use a company email so its not one of the selections so I set the email account up as other.
I have deleted the accounts, reset them, reset my iphone, tried syning through iTunes still wont work
-
I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.
Geoff2T wrote:
I am thing of using Final Cut Pro but when I try and download I get the message “Your computer’s video card does not meet the minimum system requirements.” Can I do anything about this? I am using a Mac Pro early 2008 with Yosemite 10.10.2. My current graphics card is a ATI Radeon HD 2600 XT 256 MB.
It is just as the message says. Your video card is not compatible.
You can add a compatible graphics card and use FCP X with your mac. I can't suggest which one, but maybe other people on this forum can guide.
And you may also get good suggestions in the Mac Pro forum. -
i have a printer xerox 3220 on networking ,have pc´s and a mac ,problem:it´s already install but does not work ,only print many page with code program,i will appreciate the solution
Hi guillermospain,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
OS X: Connecting a Wi-Fi printer to your Wi-Fi network
http://support.apple.com/kb/ht3500
OS X Mountain Lion: Set up a printer
http://support.apple.com/kb/PH11145
OS X Mountain Lion: Reset the printing system
http://support.apple.com/kb/PH11143
Cheers,
- Judy -
iTunes suggested to upgrade iOS for my iPodtouch but couldn't upgrade and asks to restore the iPod. But it doesn't restore also and gives error (1). Pl help.
ERROR (1)
- Place the iPod in DFU mode and then restore
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Try on another computer
- Try another cable
- Also, confirm your security software and settings are allowing communication between your device and update servers.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I bought a book that was priced $7.99 but was charged $14 and did not recieve the usual reciept for it, who do I contact for help?
You most likely did not receive the usual receipt because it was one of those authorization charges. It happens time to time, and should drop off your card. But go ahead and check with iTS just to make sure.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
As the title says....I rented a movie and started playing it, but it stopped downloading, and didnt finish within the 24hrs it should... Now I didnt watch crap and dont have a refund nor do I have a way to watch it, and worse yet no way to even re-buy it....
I want to see what i rented or get refndeed...
I will be contacting me credit card tomorrow.
thanksHave you tried contacting iTunes Support (these are user-to-user forums) ? If not then try the 'report a problem' page to contact them : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I have an iphone 4s that is having display issues. If I turn the phone on, it vibrates to acknowledge it successfully turned on but the screen stays solid black. I can plug the phone into my computer and itunes will recognize the phone as well. However, itunes can not do anything with the phone because the phone is locked and I can not unlock the phone because the screen is black.
>CURVEBALL!!!<
The screen does work though! Through trial and error along side a little troubleshooting, I was able to figure out that the screen will cut on after the phone dies completely. The phone has to die completely with no battery power left. Then if I plug the phone into a charge and wait a while for it to charge, the phone will turn on like nothing was ever even wrong with it. I charge the phone up to like 30% and turn it off then bam the phone turns on but the screen is solid black again.
I am currently in the process of waiting for the phone to die and when I turn the phone back on I am going to completely remove the auto-lock and lock code off of the phone for the time being.
Any other suggestions? Please help!Sounds like the device was dropped at some point and damaged as a result.
Take it to Apple for evaluation and a replacement. -
Hi
How can I hook up my DVI Adapter onto my new MacBookAir if the machine does not have a mini port (but only 2 USBs and 1 Thunderbolt)?
Is there a DVI adaptor already for Thunderbolt?
Thanks,
JFRThe Mini Display port and Thunderbolt port use compatible connector bodies. Your current Mini Display to DVI or VGA adapter will still work as before on the newer Thunderbolt capable machines.
-
Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page. Is there any reason for this? I've been updating the app everytime and now it's not letting me in. Pls advise. Tq
Reset the device, restart the device, try downloading any other app.
All of these are basic steps that could have been found by a simple search of the forums as a resolution for the issue.
Maybe you are looking for
-
Firewire port on Macpro won't work with my Sony DV Cam
I just got my Macpro and love it-but I do have a small problem that maybe somebody can help with. I have a Sony PD100A. I was using this camera on my PC just up until last week and grabbing video via firewire into Premier. It all worked fine. On my M
-
SRM 7.0 RFx: Supplier not able to reply to Header level questions
Hi Gurus I am currently working on SRM 7.0. I am facing a strange issue. While creating an RFX I am able to create questions as both item level and header level and able to assign weights to the same. I am also able to see questions along with weig
-
Returning XML Data from a database
Ok, just got the new DW CS3 and really want to begin using the built in Spry capabilitites. All of the examples I've seen for populating the datasets with XML data are based on referencing a static XML file. I want to query my database and return XML
-
When I try to connect Iphone to the coputer it hangs up windows XP Pro. I am running Itune7.5.0.20. I activated the Iphone successfully. But now when I try to connect it to the computer inorder to Sync Calendar and Phone directory it hangs up the Win
-
How to export an internal table to another report while submitting ..
Hi , I have 2 reports ZR1 and ZR2 . Both contains an Internal table with same structure IT_DATA. After the output of ZR1 comes,I am submitting ZR2 at a click event. The requirement is to pass the data from IT_DATA from ZR1 to IT_DATA of ZR2 while sub