Problem receiving messages with Blackberry messenger

I recently purchased the Blackberry 8130 Pearl. While using the blackberry messenger I have an intermitant problem where I do not receive messages. I have to remove the battery and restart the phone to receive the message. Can anyone shed some light on this?

Y U No Help Me

Similar Messages

There was a problem during installation of blackberry messenger. Please try again

There was a problem during installation of blackberry messenger ( any application). Please try again, this is the message i get anytime i try to download or upgrade any application on my blackberry bold 9870. pls i need your help
Thanks
bellokeshi

bellokeshi wrote:
Blackberry appworld version: 4.0.0.63
OK, that is almost the latest version... .65 is later.
You can upgrade your AppWorld from using your BlackBerry browser to go to www.blackberry.com/appworld
After you upgrade, Do a simple reboot on the BlackBerry in this manner: With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
IF then you don't see or can't find the AppWorld icon, please post back here.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Why do I receive messages with only a date, no subject, no from, no body, etc.?

at varying times I receive messages with a blank subject, no entry in [from, to] no body, but a date in 1969.
Any ideas why I receive these?

Thank you for your help.
I tried emptying the inbox, deleting the 2 files, and restarting TB.
I did the same for Sent and Trash.
I also deleted all .msf files for all inbox sub-folders and for all folders and sub-folders under "My Mail".
the problem persists.
My inbox has many sub-folders and sub-sub-folders should those be moved to My Mail?
Another problem I am having. I do not know if it is related.
I have a stack of filters that move incoming mail into folders. The stack ends with 2 filters.
(1) a filter that checks whether FROM is from someone in my mail lists. It then moves the message into a folder called "Known Sender".
(2) a psuedo-ELSE filter that check whether the subject contains a very improbable string. It put the message in a folder called ") Suspicious".
Sometimes I still end up with folders in Inbox that clearly should be in the two folders, "Known Sender" or ") Suspicious".

Problem receiving messages from M$ ISA Server...

I'm having a problem receiving messages on our Ironport from a M$ ISA Server cluster at another organization. When they try to send us messages and they leave a specific machine (x.x.169.233) it doesn't work. When the messages leave the other machine (x.x.169.237), it works just fine. However, if the .233 machine gets turned off, the .237 machines then fails to send us messages as well. See the following injection debug logfile for specifics:
Tue Jun 14 15:41:33 2005 Info: 18064693 Sent to 'x.x.169.233': '220 mta1.RecipientDomain.edu ESMTP\r\n'
Tue Jun 14 15:41:33 2005 Info: 18064693 Rcvd from 'x.x.169.233': 'EHLO smtp.SenderDomain.edu\r\n'
Tue Jun 14 15:41:33 2005 Info: 18064693 Sent to 'x.x.169.233': '250-mta1.RecipientDomain.edu\r\n250-8BITMIME\r\n250 SIZE 209715200\r\n'
Tue Jun 14 15:41:33 2005 Info: 18064693 Rcvd from 'x.x.169.233': 'MAIL FROM:<[email protected]> SIZE=4228\r\n'
Tue Jun 14 15:41:33 2005 Info: 18064693 Sent to 'x.x.169.233': '250 sender <[email protected]> ok\r\n'
Tue Jun 14 15:41:33 2005 Info: 18064693 Rcvd from 'x.x.169.233': 'RCPT TO:<[email protected]>\r\n'
Tue Jun 14 15:41:33 2005 Info: 18064693 Sent to 'x.x.169.233': '250 recipient <[email protected]> ok\r\n'
Tue Jun 14 15:41:33 2005 Info: 18064693 Rcvd from 'x.x.169.233': 'DATA\r\n'
Tue Jun 14 15:41:33 2005 Info: 18064693 Sent to 'x.x.169.233': '354 go ahead\r\n'
Tue Jun 14 15:41:45 2005 Info: 18064718 Sent to 'x.x.169.233': '220 mta1.RecipientDomain.edu ESMTP\r\n'
Tue Jun 14 15:41:45 2005 Info: 18064718 Rcvd from 'x.x.169.233': 'EHLO smtp.SenderDomain.edu\r\n'
Tue Jun 14 15:41:45 2005 Info: 18064718 Sent to 'x.x.169.233': '250-mta1.RecipientDomain.edu\r\n250-8BITMIME\r\n250 SIZE 209715200\r\n'
Tue Jun 14 15:41:45 2005 Info: 18064718 Rcvd from 'x.x.169.233': 'MAIL FROM:<[email protected]> SIZE=4211\r\n'
Tue Jun 14 15:41:45 2005 Info: 18064718 Sent to 'x.x.169.233': '250 sender <[email protected]> ok\r\n'
Tue Jun 14 15:41:45 2005 Info: 18064718 Rcvd from 'x.x.169.233': 'RCPT TO:<[email protected]>\r\n'
Tue Jun 14 15:41:45 2005 Info: 18064718 Sent to 'x.x.169.233': '250 recipient <[email protected]> ok\r\n'
Tue Jun 14 15:41:45 2005 Info: 18064718 Rcvd from 'x.x.169.233': 'DATA\r\n'
Tue Jun 14 15:41:45 2005 Info: 18064718 Sent to 'x.x.169.233': '354 go ahead\r\n'
Tue Jun 14 15:45:17 2005 Info: 18065031 Sent to 'x.x.169.233': '220 mta1.RecipientDomain.edu ESMTP\r\n'
Tue Jun 14 15:45:17 2005 Info: 18065031 Rcvd from 'x.x.169.233': 'EHLO smtp.SenderDomain.edu\r\n'
Tue Jun 14 15:45:17 2005 Info: 18065031 Sent to 'x.x.169.233': '250-mta1.RecipientDomain.edu\r\n250-8BITMIME\r\n250 SIZE 209715200\r\n'
Tue Jun 14 15:45:17 2005 Info: 18065031 Rcvd from 'x.x.169.233': 'MAIL FROM:<[email protected]> SIZE=4211\r\n'
Tue Jun 14 15:45:17 2005 Info: 18065031 Sent to 'x.x.169.233': '250 sender <[email protected]> ok\r\n'
Tue Jun 14 15:45:17 2005 Info: 18065031 Rcvd from 'x.x.169.233': 'RCPT TO:<[email protected]>\r\n'
Tue Jun 14 15:45:17 2005 Info: 18065031 Sent to 'x.x.169.233': '250 recipient <[email protected]> ok\r\n'
Tue Jun 14 15:45:17 2005 Info: 18065031 Rcvd from 'x.x.169.233': 'DATA\r\n'
Tue Jun 14 15:45:17 2005 Info: 18065031 Sent to 'x.x.169.233': '354 go ahead\r\n'
Tue Jun 14 15:45:19 2005 Info: 18065033 Sent to 'x.x.169.233': '220 mta1.RecipientDomain.edu ESMTP\r\n'
Tue Jun 14 15:45:19 2005 Info: 18065033 Rcvd from 'x.x.169.233': 'EHLO smtp.SenderDomain.edu\r\n'
Tue Jun 14 15:45:19 2005 Info: 18065033 Sent to 'x.x.169.233': '250-mta1.RecipientDomain.edu\r\n250-8BITMIME\r\n250 SIZE 209715200\r\n'
Tue Jun 14 15:45:19 2005 Info: 18065033 Rcvd from 'x.x.169.233': 'MAIL FROM:<[email protected]> SIZE=4228\r\n'
Tue Jun 14 15:45:19 2005 Info: 18065033 Sent to 'x.x.169.233': '250 sender <[email protected]> ok\r\n'
Tue Jun 14 15:45:19 2005 Info: 18065033 Rcvd from 'x.x.169.233': 'RCPT TO:<[email protected]>\r\n'
Tue Jun 14 15:45:19 2005 Info: 18065033 Sent to 'x.x.169.233': '250 recipient <[email protected]> ok\r\n'
Tue Jun 14 15:45:19 2005 Info: 18065033 Rcvd from 'x.x.169.233': 'DATA\r\n'
Tue Jun 14 15:45:19 2005 Info: 18065033 Sent to 'x.x.169.233': '354 go ahead\r\n'
It seems to be failing consistently right after the DATA command. Has anyone else seen anything like this? M$ says they don't see anything wrong with the source system and they made vague references to "having problems sending to e-mail appliances in the past".
Randle

We've run into problems SENDING to MS servers in the past, when there was a SonicWall TZ170 between them, but I have never had a problem (that I am aware of) RECEIVING from an MS server. The symtoms were sortof similar though. We would send a period on a line by itself to terminate the message, but would never get the 250 Message Accepted message from the MS server. We found out that the TZ170 was dropping the packet. There was a firmware revision released about this time last year for the TZ170 that corrected the issue.
Since this probably isn't exactly the case, but appears similar, you may want to sniff the connection and see if a packet is getting dropped by a firewall/router in the middle.

Received message with invalid client_id

I am running a Mac Mini Server with Mac OSX 10.7.3 Server and when I log in with a client (also a Mac Mini running Lion OSX 10.7.3) I see this in the system log. Everything is working fine but I don't understand why I recieve these messages.
Feb 23 12:28:15 server AppleFileServer[558]: received message with invalid client_id 462
Feb 23 12:28:15 server AppleFileServer[558]: received message with invalid client_id 463
Feb 23 12:28:17 server AppleFileServer[558]: received message with invalid client_id 470
Feb 23 12:28:17 server AppleFileServer[558]: received message with invalid client_id 471
If I log in with an older Mac Mini running Snow Leopard I don't see these messages. I tried this with another Mac Mini running the same Lion 10.7.3 and I see the same messages (different id numbers).
Anybody have an idea why this is happening?
Thanks,
Tony

You may find the solution here:
https://discussions.apple.com/thread/3602806
SQL

Received message with invalid client

Logs on one Lion 10.7.5 machine are full of
dscl[48193]: received message with invalid client_id 3
The PID keeps incrementing but the client_id is always 3
Googling mainly leads back to:
https://discussions.apple.com/message/18643232?searchText=Received%20message%20w ith%20invalid%20client#18643232
But this system isn't using LDAP. I found one post that suggested stopping and restarting AFP, but:
macbook:~ joliver$ sudo serveradmin stop afp
afp:error = "CANNOT_LOAD_BUNDLE_ERR"
macbook:~ joliver$ sudo serveradmin start afp
afp:error = "CANNOT_LOAD_BUNDLE_ERR"
Any ideas?

You may find the solution here:
https://discussions.apple.com/thread/3602806
SQL

Message Bridge error "Received message with no URI property"

I have created a message bridge between two weblogic JMS servers on different domains.
          Message bridge has source and destinations.
          I have tested each ques seperately with MDB deployed on each server.
          When i am putting message on source que then i am getting this error "Received message with no URI property"
          It would be grat help if some could tell me what might be going wrong.
          Thanks
          Akash

Hi,
          This exception indicates a failure to establish a JNDI context for either the source or target destination host. Check if the the bridge's configured URLs for both are correct. I'm not 100% sure, but it is likely that no URL need be configured for destination's that are in the same cluster as the bridge.
          For more information, I suggest looking at the Messaging Bridge FAQ, which contains some troubleshooting tips. You can find a link to it here:
          http://dev2dev.bea.com/technologies/jms/index.jsp
          Tom Barnes, BEA

HT3529 I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off? I can usually send the message, but often do not receive messages until I either have wifi or turn cellular on.

I am confused about messaging. Shouldn't I be able to send and receive messages with cellular data off and without wifi? I can send the message but often do not receive messages from others, iPhone or other, until I turn on cellular or wifi.

Depends on the type of Message.
SMS messages will send and receive with data off. and while you can guarantee you send using SMS you cannot guarantee that whoever replies to you does also. They may be replying thorugh iMessage if they are using iPhones.
However Android should be sending through SMS.
You can turn off iMessage if you want to, though people with limtied SMS text messaging in their plans may not appreciate it, and stop messaging you.

Problems with blackberry messenger

im having problems with my blackberry messenger. Certain contacts on my bbm couldnt send messages to me it just came up as a red cross, so i deleted them and tried adding them again and now it just keeps saying pending. I cant add them and they cant add me. I wiped my phone and i had an email account set up on it so i could restore my contact list but now im having problems with that too.

janette21 wrote:
Hi I have been having problems with my internet and bbm I phoned my network and they told me different steps but none worked they then told me blackberry have my details and it will get fixed but its still not working can you help? X
Hi and Welcome to the Community!
That post is a tad bit confusing, especially lacking adequate punctuation to understand where your sentence breaks are. But, if I am interpreting it correctly, then your carrier already has escalated your case up to BlackBerry and you are waiting to hear back for status. Is that correct? If so, then until you hear back, you should have no expectation of functionality anyway. I suggest you either continue to wait or ring them back up and ask for status.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

B1iSN - sender and receiver message with different tesk

Hi all,
I have a question regarding the B1i.
Is it possible to have the receiver will have a different task then the sender?
My scenario is:
The user creates a Delivery note in company "a",
The B1i creates an Invoice from that Delivery Note in company "b".
now I want to update the Delivery note with the DocEntry of the created Invoice.
I copied all other fields to my receiver message.
My problem is that I want on the event of "Create Invoice" in company "b" to update a Delivery note in company "a".
I tried doing in 2 ways:
one is in the xsl file I wrote the <QueryParams> element. Then I got this error: The business object already exists
The second is without the <QueryParams> a new Invoice was created (but i wanted the existing one to be updated).
Is it possible to do this in the B1i? How?
Thanks in advance!
Chana

Hi Chana,
Did you configured the biu to "Update on Exist"??? (Guide 03 Extensibility, section 2.14)
You can have a look to the B1iSN 8.8 B12B1 Intercompany scenario in order to see how it is done (B1iSN 8.8 is already in GA). In that scenario the Subsidiary PO is updated with the number of the SO when the SO created by B1iSN in the Headquarters.
Regards,
Trinidad.

Having problems receiving messages from queue

Hi,
I have one machine simply sending messages to a message queue on another machine. I know that the messages are arriving at the destination queue because I can use a modified version of the SimpleSyncConsumer program from the j2ee tutorial to receive the message with no troubles.
On the destination machine, I also have deployed a web servlet that is trying to do the exact same thing as the SimpleSyncConsumer, connecting to the same connection factory and same destination resource, yet it cannot receive (non-block) the message. It's almost as if it has connected to the wrong queue. There doesn't seem to be any indication of errors prior to the attempt to receive. The connection factory, connection session, consumer, all look fine.
Does anyone know why I'm getting this problem?
Thank you very much

Thanks to strachaj and pazhanikanthan for your replies.
I'd also like to emphasize the small (not servlet) application I made that is just like the SimpleSyncConsumer program which uses the same code I used inthe servlet, to connect to the servlet's queue and that it is able to receive the message.
Is there some configuration that needs to be done on the servlet war file using the deploytool to enable it to properly receive the message? I noticed the other examples in the tutorial made use of MDB's which required some extensive configuration (that dealt with queues) from the deploytool. I did not use any MDB's as I didn't think it was necessary judging from how the SimpleSyncConsumer connected to the queue. Am I mistaken?
Thanks again!

Problems receiving MMS with Video

I have Alltel (if it matters) and have only had my curve a few days. When I receive mms messages with video, I am directed to go to axcessmypics.com to retrieve the message. When I do so, I am only able to view a still of the video. There is no way to play it. The video never plays from the message itself. These videos are being sent from friends, most of whom have verizon, none of whom have a blackberry themselves. Is there some software I need to have on my phone in order to view these?

At this point in time Alltel doesn't support MMS messages on their BlackBerry devices. I believe I read somewhere that they will be changing that, but I don't have a firm date.

I can't send and receive message with my 3GS french iphone with the iOS5. What can I do?

I have install the new iOS5 and now i can't send or receive message. What can i do to resolve this problem? Can I downgrade to the iOS 4.3.5 and where can i find the information to do that

MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os
http://www.apple.com/support/macbookpro
This is helpful Mail Setup Wizard:
http://www.apple.com/support/mail
This, is not forum for notebook owners.
I would post in Mountain Lion : Mail

Having a problem receiving email with Outlook

Hello all:
Just installed a WRT54GS.
I am having a problem receiving email. Sometimes it comes through but most of the time I'm getting am error message 0X8004210A which is a timeout error. I can send email OK.
I have port forwarded 25 and 113 as well as trying to port trigger these.
Using Outlook for my email.
TIA
Message Edited by Segwin on 09-05-2006 04:45 AM

Sir,
Try to check on your outlook properties...
make sure you have to make sure that you have the correct incoming server..

Problem receiving message. 1 of 3 indicated but only receive first and restart Thunderbird and it will resend the first of 3 again.

Have been having trouble receiving messages. An indication of 1 of 3 messages being loaded. The first message comes up and that's the end. I'll restart Thunderbird and the same indication happens - the same first message returns and then that is it. If you send me an email, I doubt whether I will be able to receive it.
dmr

* http://kb.mozillazine.org/New_messages_do_not_appear
* https://support.mozillamessaging.com/en-US/kb/problems-sending-and-receiving-messages

Problem receiving messages with Blackberry messenger

Similar Messages

Maybe you are looking for