Problem Recording FMX1 Transaction for Batch Input. Plz Help

Hi Everyone!!!
I'm using the Transaction SHDB to create a new recording over the FMX1 Transaction for a Batch Input. The strange thing is that when i'm about to save the recording i get the following error:
"A runtime error: SAPSQL_ARRAY_INSERT_DUPREC"
I tried using the transaction FMX1 with the same data(constants), and it works perfectly. And I know it's not a duplicated key or anything, it works fine when i use the transaction.
This lead me to think that the problem is somewhere when i try to record the transaction.
Any Ideas of how to fix the problem, or does anyone knows if its a SAP problem that needs some kind of fix.
Any help would be really aprreciated!
Thx again.

Try using recording method and try to post 1 item...U will get the recording. In this recording, the field might be shown up which can be used.

Similar Messages

  • Authorisation to transactions for batch input

    We have a reuirement where in the user should have access to create vendors through batch input (BDC) but the user should not have direct access to tcode XK01. Is this possible?

    you can do that, normally what is followed in that case is to designate a single user Id for BDC executiona nd give it all the access so that it can be useful in tracking down the changes and all the other work too.
    Also, this will help in avoiding other users from making changes,
    But for using this option you have to discuss with you project manager and the client.
    Regards,
    Amit
    Reward all helpful replies.

  • AFAB IM document type is defined only for batch input

    Hello Everybody,
    With the new version ECC6, I have this message error : "document type is defined only for batch input"  when I launch the monthly depreciation with AFAB transaction.
    Thanks a lot in advance for your help !
    Regards.

    Hi
    For this document type in OBA7, remove the check for 'batch input only'
    Thank You,

  • How can i remove my credit card from app store, the none option its not there and i don't Owen  nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

    How can i remove my credit card from app store, the none option its not there and i don't Owen  nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

    You've logged into your account and viewed your purchase history and there aren't any error messages shown (e.g. 'problem with a previous purchase'), and you haven't got any purchases due (e.g. pre-orders and/or subscriptions) : Why can’t I select None when I edit my Apple ID payment information ?

  • Which is the best for me?plz help me .I've more confusing about my Career.

    I've done B.E Computer Science and Engineering year of 2013. Currently i'm doing IT-Support Engineer job. I've only 7 months experience. But i know how to install,Mounting of the blade server.but i don't know about windows servers.but i can install server
    OS.i have lot of confusion and fear also,about my career.which is suitable for me?plz help me.frnds. 

    Hi, Ravi.
    Based on your experience, you may want to start working your way to earning an MCSA for Windows Server 2012 R2. It requires you to pass three exams. The first exam you may want to take on is 70-410 which is on install Windows Server 2012.
    Here is the MCSA: Windows Server 2012 certification title description:
    http://www.microsoft.com/learning/en-us/mcsa-windows-server-certification.aspx
    As you can see, it will require you to pass three exams. Here they are:
    70-410 Installing and Configuring Windows Server 2012
    http://www.microsoft.com/learning/en-us/exam-70-410.aspx
    70-411 Administering Windows Server 2012
    http://www.microsoft.com/learning/en-us/exam-70-411.aspx
    70-412 Configuring Advanced Windows Server 2012 Services
    http://www.microsoft.com/learning/en-us/exam-70-412.aspx
    Microsoft offers free online training through different web sites. Consider these as a few of the many resources you can use to study for these exams.
    TechNet
    http://technet.microsoft.com/en-US/
    Microsoft Virtual Academy
    http://www.microsoftvirtualacademy.com/
    By the way - if you are still in school and prefer a more entry-level certification, you can also consider the MTA certification track designed for college students:
    http://www.microsoft.com/learning/en-us/mta-certification.aspx
    Good luck!
    Best wishes, Davin Mickelson

  • How to Active face Time on my iPhone 4s remember its design for saudhi arabia plz help me now its using Sri Lanka

    Hi guys Help me
    How to Active face Time on my iPhone 4s remember its design for saudhi arabia plz help me now its using Sri Lanka its not jeilbroken & Never like do it I heat jeilbroken I need to active my resriction face time with apple & leagle mode plz help
    Thank you all

    FaceTime is not available for iPhones purchased in Saudi Arabia as stated in this article: http://support.apple.com/kb/HT1937
    So unfortunately that iPhone will never have FaceTime.

  • Transaction WAHD2 - Batch Input compatible?

    Hi,
    Can anyone tell me if the transaction code WAHD2 (Alternative Historical Data) is compatible with Batch Input. There's a particular field (forecast value) which we're trying to use but when we try the 'help'(F1) for this field, it does not show the batch input field name.
    Is there a BAPI which can be used instead?
    Thanks in advance.
    Regards,
    Manu.

    Try using recording method and try to post 1 item...U will get the recording. In this recording, the field might be shown up which can be used.

  • Field Exit for Batch Input creation from LSMW

    Hi all,
    I am having problems getting a field exit to work for validation of user id in the "Create Batch Input Session" step of LSMW.
    Program: /SAPDMC/SAP_LSMW_BI_RECORDING
    Screen:  1000
    Data Element: SYUNAME
    Any help would be appreciated.
    Regards,
    Jason
    Message was edited by: Jason Lante

    Field exits are not supported after 4.6 yes, but they still work. I found the reason why my field exit wasn't working; it related to the fact that the field I am applying it to is not directly related to a dictionary object. Meaning I cannot apply a field exit.
    So my question now is what other ways are there to enhance LSMW?
    Regards,
    Jason

  • T-codes for batch input

    regards,
    still need the t-codes for the following:
    Batch Input: Physical Inventory document for cycle counting, vendor consignment,project stk and ABC Analysis for cycle counting. thanks

    IM level see:
    MI01 Create Physical Inventory Document
    MI02 Change Physical Inventory Document
    MI03 Display Physical Inventory Document
    MI04 Enter Inventory Count with Document
    MI05 Change Inventory Count
    MI06 Display Inventory Count
    MI07 Process List of Differences
    MI08 Create List of Differences with Doc.
    MI09 Enter Inventory Count w/o Document
    MI10 Create List of Differences w/o Doc.
    MI11 Recount Physical Inventory Document
    MI12 Display changes
    MI20 Print List of Differences
    MI21 Print physical inventory document
    MI22 Display Phys. Inv. Docs. f. Material
    MI23 Disp. Phys. Inv. Data for Material
    MI24 Physical Inventory List
    MI31 Batch Input: Create Phys. Inv. Doc.
    MI32 Batch Input: Block Material
    MI33 Batch Input: Freeze Book Inv.Balance
    MI34 Batch Input: Enter Count
    MI35 Batch Input: Post Zero Stock Balance
    MI37 Batch Input: Post Differences
    MI38 Batch Input: Count and Differences
    MI39 Batch Input: Document and Count
    MI40 Batch Input: Doc., Count and Diff.

  • Structure for batch input

    is there any quicker way to find appropriate sap structure regarding batch input?
    line batch input for vendor creation, how to find the sap structure so that the format file can be defined later on.

    Hi Oscar,
    U can also use LSMW, using std batch object 0040 (vendors) - very quick to define. In LSMW u can at any time go to 'Maintain source fields' (which is the structure of the source file) and change the order/length of the fields.
    Good luck
    Igal

  • No budget checking for batch input

    Hi people
    We are using the budget checking functions under Funds Mgmt (Former Budgeting) ECC6.0. Is there a way that we can exclude budget checking for postings done through batch input?
    appreciate any help.
    TQ
    darth maut

    Hi,
    Please check the SAP note 573409
    Regards,
    Abhijit

  • How to write code for this logic, plz help me very urgent

    Hi All,
    i am new to sap-abap, i got this work and i m working on this can any body help me in writing code, plz help me, this is very very urgent.
    here  i m giving my logic, can anybody send me the code related to this logic.
    this is very urgent .
    this program o/p should be in ALV format and need to create one commond 'SAVE" on this o/t list  if  user clicks save processedon and processedby fields in ZFIBUE should be updated automatically.
    i am creating one custom table zfibue having fields: (serialno, bukrs, matnr,prdha,hkont,gsber,wrbtr,budat, credate, cretime,processed, processedon, processedby,mapped)
    fields of zfibue:
    serailno = numc
    bukrs = char
    matnr = char
    prdha = char
    hkont = char
    gsber = char
    wrbtr = char
    budat = date
    credate = date
    cretime = time
    processed= char
    processedon = date
    processedby = char
    mapped = char      are   belongs to above type data types
    and seelct-optionfields:  s_bukrs for bseg-bukrs
                                        s_hkont for bseg-hkont,
                                         s_budat for bkpf-budat,
                                         s_processed for zfibue-processed,
                                          s_processedon for zfibue-processedon,
                                          s_mapped. for zfibue-mapped
    parameters: p_chk1 as checkbox,
                      p_chk2 as checkbox.
                      p_filepath type rlgrap-filename.
    1.1 Validate the user inputs (S_BUKRS and S_HKONT) against respective check tables (T001 and SKB1). If the validation fails, provide respective error message. Eg: “Invalid input for Company Code”.
    1.2 Fetch SERIALNO, BUKRS, MATNR, PRDHA, HKONT, GSBER, WRBTR, BUDAT, CREDATE, CRETIME, PROCESSED, PROCESSEDON, PROCESSEDBY, MAPPED from table ZFIBUE into internal table GT_ZFIBUE where BUKRS IN S_BUKRS, HKONT IN S_HKONT, BUDAT IN S_BUDAT, PROCESSED IN S_PROCESSED, PROCESSEDON IN S_PROCESSEDON, and MAPPED IN S_MAPPED.
    1.3 If P_CHK2 = ‘X’, go to step 1.11. Else continue.
    1.4 If P_CHK1 = ‘X’, continue. Else go to step 1.9
    1.5 Fetch MATNR, PRDHA from MARA into GT_MARA for all entries in GT_ZFIBUE where MATNR = GT_ZFIBUE-MATNR.
    1.6 Sort and delete adjacent duplicates from GT_MARA based on MATNR.
    1.7 Loop through GT_ZFIBUE where PRDHA = blank.
              Read Table GT_MARA based on MATNR = GT_ZFIBUE-MATNR.
              IF sy-subrc = 0.
                     Move GT_MARA-PRDHA to GT_ZFIBUE-PRDHA.
                  Modify Table GT_ZFIBUE. “Update Product Hierarchy
                 Endif.
        Fetch PRDHA, GSBER from ZFIBU into GT_ZFIBU for all entries in GT_ZFIBUE where PRDHA = GT_ZFIBUE-PRDHA.
        Read Table GT_ZFIBU based on PRDHA = GT_ZFIBUE-PRDHA.
              IF sy-subrc = 0.
                     Move GT_ZFIBU-GSBER to GT_ZFIBUE-GSBER.
                  Move “X” to GT_ZFIBUE-MAPPED.      
                  Modify Table GT_ZFIBUE.
                 Endif.   
    Endloop.
    1.8 Modify database table ZFIBUE from GT_ZFIBUE.
    1.9 Fill the field catalog table GT_FIELDCAT using the details of output fields listed in section “Inputs/Outputs” (above).
       Eg:                 LWA_ FIELDCAT -SELTEXT_L = 'Serial Number’.
                              LWA_ FIELDCAT -DATATYPE = ‘NUMC’.
                              LWA_ FIELDCAT -OUTPUTLEN = 9.
                              LWA_ FIELDCAT -TABNAME = 'GT_ZFIBUE'.
                              LWA_ FIELDCAT-FIELDNAME = 'SERIALNO'.
              Append LWA_FIELDCAT to GT_FIELDCAT
    Note: a) The output field GT_ZFIBUE-PROCESSED will be editable marking INPUT = “X” in field catalog (GT_FIELDCAT).
             b) The standard ALV functionality will be used to give the user option for selecting all or blocks of entries at a time.
             c) The PF-STATUS STANDARD_FULLSCREEN from function group SLVC_FULLSCREEN will be copied to the program and modified to include a “SAVE” button.
    1.10 Call the function module REUSE_ALV_GRID_DISPLAY passing output table GT_ZFIBUE and field catalog GT_FIELDCAT. Additional parameters like I_CALLBACK_PF_STATUS_SET (= ‘ZFIBUESTAT’) and I_CALLBACK_USER_COMMAND (=’HANDLE_USER_ACTION’) will also be passed to handle user events. Go to 2.14.
    1.11 Download the file to P_FILEPATH using function module GUI_DOWNLOAD passing GT_ZFIBUE.
    1.12 Exit Program.
    Logic to be implemented in  routine “Handle_User_Action”
    This routine will have the following interface:
    FORM Handle_User_Action  USING r_ucomm LIKE sy-ucomm
                                                               rs_selfield TYPE slis_selfield.
    ENDFORM.
    Following logic will be implemented in this routine:
    1.     If r_ucomm = ‘SAVE’, continue. Else exit.
    2.     Loop through GT_ZFIBUE where SEL_ROW = ‘X’. “Row is selected
    a.     IF GT_ZFIBUE-PROCESSED = ‘X’.
    i.     GT_ZFIBUE-PROCESSEDON = SY-DATUM.
    ii.     GT_ZFIBUE-PROCESSEDBY = SY-UNAME.
    iii.     MODIFY ZFIBUE FROM work area GT_ZFIBUE.
    Endif.
    Endloop.

    Hi Swathi,
    If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop.

  • I was trying to restore my iPhone 4(iOS 7.0.4) on my hp Laptop. But when i was restoring, it gets stuck in middle. then i tried again but same problem. always stuck at the same point. plz help me.

    i was trying to restore my iPhone 4(iOS 7.0.4) on my hp laptop. but when i was restoring, it gets stuck in middle.then it keep showing recovery mode screen and i tried again to restore but same problem. Always stuck at the same point. plz help me.

    Hi Varinder Ghuman,
    Thanks for using Apple Support Communities.  If you're unable to restore your iPhone, this article may help:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Cheers,
    - Ari

  • Reverse SSH not working for Cisco 3750.Plz help.

    Hi,
    I have configured the reverse ssh mentioned on the cisco document:http://www.cisco.com/en/US/docs/ios/12_3t/12_3t11/feature/guide/gt_rssh.html#wp1051457.
    But now I am running into the issue that When I  issue command ssh -l alex:rotary1 192.38.6.8 from the cli of the router  I’m presented with a password prompt.
    I  enter my password and get connected. However at this point when I type, for  example, the atdt command I don’t see any output  displayed.
    So I  tried typing command atdt <tel no.> and at the same time ran a debug modem  on a separate session. It was from the separate session I could see the call  been made to the remote device and connected successfully. However almost  immediately the modem debug displays message 0236596: Dec  7 2010  12:18:18.236 GMT: TTY69: cleanup pending. Delaying DTR. At no point do I see  output displayed on the session where I connected to the  modem.
    When using telnet to  connect, i.e using the same modem and the same remote device, we have had no  problems it is just with SSH.
    Any suggestion on this will be highly appriciated.
    Thanks
    Alex.

    Philip,
    I first thank you for coming forward to help me on this.
    I use the 30DM(Digital Modem) Card on the router. I have configured on of this modem  on the PRI card(1/18) to make outbound calls. We use this dailup to cyclades the devices located on our remote office. Hence we loose the main internet connectivity we use this option as a backup.
    Show ver:Cisco IOS Software, 3700 Software (C3725-ADVSECURITYK9-M), Version 12.3(11)T5
    ine con 0
    transport output none
    line 72 92
    modem InOut
    modem autoconfigure type mica
    transport input all
    transport output all
    autoselect during-login
    autoselect ppp
    line 93
    absolute-timeout 60
    modem InOut
    modem autoconfigure type mica
    rotary 1
    no exec
    transport input ssh
    transport output none
    line aux 0
    no exec
    transport output none
    line vty 0 4
    logging synchronous
    transport input ssh
    transport output ssh
    Please let me know is this a bug or anything else. AS the same setup works fine when I use TElnet rather than ssh.
    Thanks in advance.
    REgards
    Alex.

  • Exceptions in QuickTimes for JAVA examples - plz help!

    Hello,
    I have a problem with the QuickTime for JAVA Applet Demos.
    I set the correct CLASSPATH and the examples with the Frames are working fine. The Compilation of the Applet examples also works.
    set CLASSPATH=C:\Programs\Java\j2re1.4.2_02\lib\ext\QTJava.zip;.
    javac -classpath C:\Programs\Java\j2re1.4.2_02\lib\ext\QTJava.zip;. QTSimpleApplet.java
    But when I want to run and test them with the Internet Explorer or SUNs appletviewer an
    Exception is thrown (NoClassDefFoundError) and an error message appears in the appletviewer / browser: "Applet could not be initialized".
    java.lang.NoClassDefFoundError: quicktime/QTException
    at java.lang.Class.getDeclaredConstructors0(Native Method)
    at java.lang.Class.privateGetDeclaredConstructors(Class.java:1610)
    at java.lang.Class.getConstructor0(Class.java:1922)
    at java.lang.Class.newInstance0(Class.java:278)
    at java.lang.Class.newInstance(Class.java:261)
    at sun.applet.AppletPanel.createApplet(AppletPanel.java:617)
    at sun.applet.AppletPanel.runLoader(AppletPanel.java:546)
    at sun.applet.AppletPanel.run(AppletPanel.java:298)
    at java.lang.Thread.run(Thread.java:534)
    When I copy the extracted QTJava.zip to the directory where the source file and the class file for the example are located an other Exception is thrown (ExceptionInInitializerError). :-( This Except. is caused by the security.
    java.lang.ExceptionInInitializerError
    at quicktime.jdirect.QTNative.loadQT(QTNative.java:33)
    at quicktime.jdirect.QuickTimeLib.<clinit>(QuickTimeLib.java:17)
    at quicktime.QTSession.<clinit>(QTSession.java:82)
    at QTSimpleApplet.init(QTSimpleApplet.java:34)
    at sun.applet.AppletPanel.run(AppletPanel.java:353)
    at java.lang.Thread.run(Thread.java:534)
    Caused by: java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.QTJava)
    at java.security.AccessControlContext.checkPermission(AccessControlContext.java:269)
    at java.security.AccessController.checkPermission(AccessController.java:401)
    at java.lang.SecurityManager.checkPermission(SecurityManager.java:524)
    at java.lang.SecurityManager.checkLink(SecurityManager.java:810)
    at java.lang.Runtime.loadLibrary0(Runtime.java:782)
    at java.lang.System.loadLibrary(System.java:834)
    at quicktime.jdirect.JDirectLinker$1.run(JDirectLinker.java:266)
    at java.security.AccessController.doPrivileged(Native Method)
    at quicktime.jdirect.JDirectLinker$1$PrivelegedAction.establish(JDirectLinker.java:264)
    at quicktime.jdirect.JDirectLinker.<clinit>(JDirectLinker.java:272)
    ... 6 more
    How can I solve these problems? I just want to view some movies in an applet!
    Please help me. Thanks in advance!

    Hi
    I also has similar problem using the QuickTime using via Applet.
    When I connect QuickTime via Applet, I have the error message
    Caused by: java.security.AccessControlException: access denied (java.lang.RuntimePermission loadLibrary.QTJava)
    I know that
    this error is caused by the Java security "sandbox" for Plug-in.
    Plug-in has restrictions for unsigned applets..and
    I can use the QuickTime via Applet, if did manual editing of the java.policy file in the JRE.
    ( grant { permission java.security.AllPermission; } )
    But editing of the java.policy file is discouraged...
    My question is why loadLibrary.QTJava has restrictions for unsigned applets??
    and how can I use QuickTime via Applet without manual editing of the java.policy??
    Please give me some advice.

Maybe you are looking for