Problem recording guitar through Black star Id USB amp.

Through changing the sample rate through windows control panel to 48000 i got audition to register in the real time indicator a response from my amp, however when i press record these registered sounds are not recorded. Any advice?
Cheers.

I had your problem and I resolved it! i have my mic and guitars plugged into my Eurorack UB1202 analog mixer which outputs to my MacBook Pro via Bheringer UCA222 audio interface then back to my mixer and to my headphones/speakers. i noticed a white noise last night while i was working and all I did to fix it was unplug the audio interface from the outside usb hub (closest to the screen) and plugged it into my middle hub. the noise has now stopped and its crystal clear.
TL;DR try plugging your audio interface into different usb hubs. it worked for me. hope that helps!

Similar Messages

Problems recording audio through garageband

Hello Mac world, I'm completely new to the Mac computers, and just purchased my MacBook Pro with a 2.3 ghz quad-core i7 processor, 16 GB of RAM, and 512 GB SSD, so I don't think specs are the problem to my issue. I purchased the Mac to record audio, and also purchased an audio interface to record through (Focusrite Scarlett 2i2). I have downloaded the most recent drivers for that. I connected my guitar through the instrument input, connected the interface through USB, and connected headphones into the headphone jack. I can hear the audio playback while I play through the headphones, but my problem relates to the actual recording process, as well as the audio playback.
When recording, I get the following error: "Error while trying to synchronize Audio and MIDI - Sample rate 41068 recognized. Check conflict between GarageBand and external device". I read that GarageBand requires a sample rate of 41000, but I don't know how to check/change that. I also can't hear the metronome or the count in while I play/record. My input source is Mono 1 (Scarlett 2i2 USB), instead of Stereo (Scarlett 2i2 USB) in both my GarageBand preferences and my System Preferences.
Next, I have a problem hearing the audio playback after recording. Again, I can hear the guitar while I play, but not after I record. Also, like I mentioned above, I can't hear any metronome or count in.
I also successfully recorded using a MIDI controller when connecting directly from the controller to computer using USB. Again, I don't think that my system specs are an issue, but I am completely new to the Mac side of things, and am not sure where I am going wrong with this.
Does anyone have any clues as to what the issue may be? Any help would be greatly appreciated.
Thanks!
Adam

WO HOO I answered my own question.
I found this little gem of a tutorial:
http://homepage.mac.com/beryrinaldo/gbsf/
...which outlines how to route DV audio into garageband using soundflower. Worked like a charm!

Heavy white noise/hiss while recording guitar through audio interface

I have just purchased a new MacBook pro 2011 (low end 15") and have tried recording with an m-audio fast track audio interface. Unfortunately I'm getting terrible white noise and hiss while recording my guitar. The guitar is plugged straight into the interface using a guitar lead which is then usb connected to my mac.
I am pretty sure it's not the interface because it's brand new. Also I have tried three different guitars and all have the same out come.
Please help
Things that may help diagnose the problem:
I have installed a new driver.
When the gain and presence is increased the noise is worse.
The output is not hitting the red mark.
Thanks
Andre

I had your problem and I resolved it! i have my mic and guitars plugged into my Eurorack UB1202 analog mixer which outputs to my MacBook Pro via Bheringer UCA222 audio interface then back to my mixer and to my headphones/speakers. i noticed a white noise last night while i was working and all I did to fix it was unplug the audio interface from the outside usb hub (closest to the screen) and plugged it into my middle hub. the noise has now stopped and its crystal clear.
TL;DR try plugging your audio interface into different usb hubs. it worked for me. hope that helps!

Serious problem recording guitar tracks! I can't get them tight!

I am a good player and have recorded quite a bit in my life, but I can't for the life of me get these part to lock with everything else. I'm using a click and also playing to drums and keys. It feels tight and feels like it is locking when playing but upon playback, at least for my ears it is not there. I've had this problem before and literally had to shift the region to get it to lock a little better.
Could it be something with latency, what I am playing and feeling is not what is going down to tape, or hard disk?
Perplexed.

Hi Foxboy,
Yes I'm am using an M-Audio Fastrack Pro. I think I might have solved the issue, but if you have any suggestions I am completely open to suggestion.
Thanks

No sound or strange sounds when trying to record guitar

Hi!
I'm new to Logic Pro, after having worked with garageband for many years. I've just been trying to record guitar through my audio interface, with strange results. I've set my audio in and output source as my M-Audio firewire solo, created an audio track, and selected the guitar sound I want. At first there was no input, then when I deleted the first track and created a new one, I could hear the guitar through the monitor and it was being input, but it had a horrible distorted and out of tune sound - and that was how it sounded when I recorded it too. Then I tried it again and it seemed to be working fine for about 5 minutes - it sounded fine through the headphones and the recording was right - but then went back to the strange sounds again - without me changing anything!
I'm using Logic Pro 9.1.8, on a Macbook Pro running Mac OSX 10.8.3, and have a M-Audio Firewire Solo audio interface.
I'm very frustrated right now - so I'd be grateful for any help!
Thanks,
Stephen

Hi stephenhis,
If you are having issues with imput audio in Logic Pro, the first place to start would be with some basic isolation troubleshooting to see if the issue can be localized. That should provide a good basis for further troublshooting should the issue persist.
Logic Pro 8 and 9: Troubleshooting basics
http://support.apple.com/kb/HT2375
Regards,
- Brenden

I have a usb to 14" cable and want to record my guitar through in on logic. How do I do so?!?

I have a usb to 1/4" cable and want to record my guitar through it on logic. How do I do so?!?

Hi,
Interesting cable you have there but, unless it's also and analog to digital converter, it may not work.

Zoom G2.1u USB interface to record guitar

The Zoom is my floor guitar effects unit, but is also a USB interface. What do I need to record guitar into Garageband other than that, if anything? How/where do I set up the input preferences on the Mac so it reads the signal?
Related, I want to record 4-track tapes to digital. I have the cables that connect the red/white audio outs to the 1/4" input on the Zoom, then the USB to the computer. Will that work?
Thanks in advance for answering my dumb questions!

You have the G2 set for both input and output in the Garageband preferences. Choose the built-in output to monitor from the mac or plug the headphones into the G2.

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

I'm trying to record audio into my iPad2 using GarageBand and an iRig, but I can't monitor my tracks at the same time as recording, meaning if I lay down a drum track and attempt to record guitar, I can't hear the drums while recording. Thoughts?

Hi, I have this exact same problem. I haven't been using an iRig, just a cheap USB-jack cable. I managed to do this with the first cable I bought, but since it broke I've been unable to find a replacement that allows me to hear the drums while recording. DId you manage to get over this issue? If so I would really like to know how. Thanks and best wishes.

How to record guitar in Logic Pro 8

Hi,
Well, I´ve got a Mac Mini, Logic Pro 8, Audio Kontrol 1 audio interface, and an acoustic guitar. What I would like to do is to record my guitar songs into Logic Pro 8 and add other sound effects. My problem is, however, that I can´t figure out how to record guitar using Logic Pro 8. In the "Preferences" I choose "Core Audio" as device. I connect my guitar into the audio interface (Audio Kontrol 1) and from the audio interface to my Mac Mini using an USB.
When I start playing, Logic Pro is silent. When I record, there is no sound. What is even more strange is that GarageBand is working perfect! So I guess it has something to do with the settings in Logic Pro 8. So, I ask you guys...do you know have to solve this problem? If so, I would be very grateful!
Best regards,
Tor

Thanks guys!
I will try this as soon as I come home!
I will let you know how it works.
Tor
Well, I mentioned the aggregate audio device since I saw this article. Is this possible for me? Why should I do this?
http://www.apple.com/pro/techniques/aggregateaudio/recording.html

X-FI Xtreme Audio (OEM) problems with Guitar Po

Hey all, I just upgraded from a SB Li've 5. Sound card to an X-FI Xtreme Audio Card and am now having problems with guitar port. There seems to be a delay or lag time from playing to actually hearing the sound. It sounds like its about half a second or so which makes it really annoying for trying to play. Is there a remedy for this or is there something wrong with the card/drivers?Also, is Line in and Mic levels no longer in the windows volume?playback control?

jutapa wrote:
frubsen wrote:
Hey all, I just upgraded from a SB Li've 5. Sound card to an X-FI Xtreme Audio Card and am now having problems with guitar port. There seems to be a delay or lag time from playing to actually hearing the sound. It sounds like its about half a second or so which makes it really annoying for trying to play. Is there a remedy for this or is there something wrong with the card/drivers?Also, is Line in and Mic levels no longer in the windows volume playback control?
You should be able to control I/Os through Windows mixer(s) and Creative Control Panel (comes with the driver package). If you like to install those software intend for X-Fi you need to download the CD image from BadBoys site (if he still has the site up an running). You get those mixers showing up either through panel which pops up when you enter mmsys.cpl in start->run... prompt (Audio tab, Volume buttons). Individual mixer panels can be called with commands sndvol32 (play) and sndvol32 /r (recording). The lag you have there is normally called as latency. You get rid of it by using ASIO driver mode with 2 - 0ms latency settings. You can set the latency through ASIO controlpanel. If the guitarport has an ASIO driver it's own, use it's control panel or try with asio4all driver (http://www.asio4all.com).jutapaMessage Edited by jutapa on 0-9-20080:0 PM
Is this a standalone driver? Or is it something used in addition to an existing sound driver? I'm having a similar problem with my mic, there is a delay (and it has to be turned up really loud to be heard, although that may be a different problem) and I'm looking for a solution.

I have an iPhone 4 still running 6.1.3 software. A few days ago it stopped working through my car's USB connection. How can this be fixed?

I have an iPhone 4 still running 6.1.3 software. A few days ago it stopped working through my car's USB connection (I have a 2010 Honda Civic Hybrid). I can no longer control my music through my car's stereo system. I am unable to choose what song, album, playlist, etc. to be played and cannot skip songs. When I try to skip, it reverts back to the first song. When I choose what to be played directly on my phone, it can only be played for about 30 seconds through my car's stereo system before it stops and displays the message "Unsupported Version." How can this be fixed? (Also, I know it is my iPhone and not my car because someone I know has the same exact car as me from 2009 and it did the same thing on theirs.)
Any help would be greatly appreciated. This problem is extremely frustrating and the alternative of trying to change music directly on my phone while driving is a risk I am not willing to consider. Thanks!

Alright, sorry for not having browsed this page a bit more before stating my question. I have just found some other similar topics on this problem. Please don't reply this thread unless there actually is a solution to the problem, because at current time there is not.

"Fade Through Black" transition in slideshows corrupts project!

I built a project from the ground up in iMovie. Shared this to iDVD. Constructed the whole dvd including a slideshow. When I clicked on "Fade Through Black" in the transitions menu for slideshows, iDVD abruptly quit with no error message! Completely quit.
I tried to open the project by double-clicking it and it would bring up a prompt saying "Loading themes", then show the iDVD window for a split second and quit again.
I tried making the iDVD project twice. With different themes each time, and still got the same result when I clicked on the "Fade Through Black" transistion. I had even saved the file right before clicking the transistion. That didn't help at all...

This frequently helps solve some problems. Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
You'll need to reset some Preferences.

Problem Recording a Line In

I am having problems recording line in through macbook in Logic Pro. i am sure i have gone straight through my stereo out into line in on my laptop and and recorded it in logic but for some reason its not working. any ideas check list etc. i know this is lame but i have gone totally blank. thx

Try to do:
- open MacOS system pref. / audio / input / select "line in"
-open Logic:
preferences / audio 7 devices
select built-in Input as device and click apply changes.
Create a new audio track (mono or stereo) and select input 1 or 2 if mono or 1+2 if stereo
It should work, let me know
goodbye

L7680 Horizontal white lines through black/gray only

HP OfficeJet Pro L7680, Windows 7
Getting white horizontal lines through black or gray text and graphics.
The Print Quality Diagnostics Page results are:
Test pattern 1 looks fine
Test pattern 2 has white horizontal lines on the black and gray blocks. The color blocks look fine.
Test pattern 3 has white horizontal lines spaced 0.87 inches apart. They do not line up with the arrows.
I have run the Align Printer, Clean Printhead (three times) and Calibrate Linefeed functions and the problem still remains the same.
This particular case doesn't seem to be covered in the "Fixing Print Quality Problems for the HP Officejet Pro L7500, L7600, and L7700 All-in-One Printer Series" page at
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01957673&cc=us&dlc=en&lc=en
This question was solved.
View Solution.

Hi @Gerald22 ,
I see that you are having issues with the horizontal lines printing through the black. I can help you today.
Thanks for providing all the troubleshooting steps you have already tried. The cleanings, I believe that you meant you ran them through the printer settings.
I have provided a document for manually cleaning the contacts and one for manually cleaning the printheads to see if that helps. Please disregard the titles.
A 'Cartridge Problem,' 'Ink Cartridge Failure,' or 'Incompatible Ink Cartridges' Error Message Displ...
'The Following Printhead has a problem' or 'The following printheads are missing or damaged, replace...
Are you using Genuine HP Cartridges?
What are the ink levels?
Please call our technical support if the issue persists, at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Contact HP.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Fade Through Black Transition Not Displaying Properly

Greetings all. I have imported my movie clips into iMovie '08. Each of the clips plays fine by themselves as well as when edited and combined in my project. The problem arrises when I try to add a Fade Through Black (or any transition for that matter) between the clips. Since the transition I'm interested in is the Fade Through Black that's the one I'm going to continue to reference as my transition. When I scrub the cursor across the transition it displays perfectly in the preview window. However, when I try to play the movie it doesn't fade to black it just jumps to black, and doesn't come out of black for several seconds (much longer than my duration). Any suggestions on what to try would be most appreciated. Thank you and have a good night.

This frequently helps solve some problems. Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
You'll need to reset some Preferences.

Problem recording guitar through Black star Id USB amp.

Similar Messages

Maybe you are looking for