Problem recording with WaveStu

Hi all! I can't figure out why I'm not getting a signal when I'm recording. I believe my soundcard is working fine because I can play back old recordings through the external amplifier and also can get an imput signal off the card. When I select "record", it says it's recording, but there's no display of a wave on the screen. When I save the file and play it back, there's nothing. I've checked the obvious stuff like the volume control. The Help is really unhelpful on this. I've sent an email to Creative, but have gotten no reply yet. I wanted to use the weekend to transfer a pile of old tapes. Any ideas? Thanks!
Paul

Hey,
Ok I read your post so I realized i've never used wave studio to try to record. I have a elite pro as well.
I tried to record just now using the aux in on the external amp, and you are right it doesn't work. Same exact problem you are having. I have another problem too I think I just updated drivers so it might fix this problem not sure, but when I record using the other recording program. Its all staticly and stuff. I can't figure out why it is real bad quaitly and makes static noises and stuff. I have my guitar and mic going through a mixer andthen into my external x fi amp. Its fine when I play it where everything is not up loud but soon as I like turn everything up major amounts of static. My aim is shadowing98304 and my msn is [email][email protected]][email protected][/url] and my yahoo is shadowing98320 get on messager so we can talk about these problems.
John

Similar Messages

Problem recording with a mic in flash 9.0.124.0

Hi, I just wanted to see if someone can help me with this
issue. I'm using Ubuntu Gutsy with Mozilla Firefox 2.0.0.16 (in
case this has some relevance). I can see flash videos, I can hear
sounds, everything works fine, everywhere. But when I try to record
audio in some pages (using a mic), even if I can use the mic
outside, and even if Flash recognizes the mic as being connected,
it doesn't work. I can shout next to the mic and Flash won't show
any sign of "hearing" anything (the yellow bar next to the control
doesn't show). :(
Hope someone helps.

Bentley,
Don't mean to shoot the messenger...so please take this in
good faith.
I'd gladly log a bug if anything was ever done about it. I've
been logging bugs with Adobe on Flash player and Flex for two years
but these bugs are still outstanding and deferred to the next
release :). Releases come and go but the issues are outstanding.
These issues are show stoppers for a lot of people.
I see no point in me taking the extra effort if nothing is
going to be done about it. Other software companies I work with
respond immediately.
Others, won't see the issue unless they're doing what we are
:). Things were working fine until we upgraded to the new player.
To me that's an issue that needs to be addressed no?
I'd gladly provide you with two links, one that shows this
issue and one that does not if it helps verify the problem.

Problem Recording with a MOTU Ultra Lite

Hi, everyone:
I'm not getting any green bar movement on the audio/recording display. It worked yesterday, but now, suddenly, nothing. Here's the thing: I CAN RECORD. My MacBook Pro is showing a connecton with the MOTU - the meter goes up and down in system preferences. Also, the MOTU is showing a connection with my MacBook - meter on MOTU going up and down.
But in FCP X...no green in recording meter. Yet I AM recording. Difficult to monitor levels, obviously.
I checked the channel (channel 1, mono, only one mic). Everything seems OK.
Thanks either way

Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

Problem recording with keyboard...

I am trying to put some crowd noises at the beginning of a song, and whenever I do the "applause and laughter" or "comedy noises" instrument and try to record from flat/sharp keys like "w" "e" "t" "y" or "u", it makes the sound, but it doesn't actually record in the song.
It only records when I hit non-flat notes.

i can't duplicate that here, all keys with sounds play and record (and playback).
first things to try for “oddball” probs:
http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs

Problem recording with L

Whenever recording something the volume level is either too low to be heard or its insanely loud and distorted. This happens nearly every other time I record something. It seems as if the input volume changes without affecting any of the sliders on the volume control. Sometimes it works fine but it happens to much to just ignore. Im using a line in from my amp to record. Ive also tried using my microphone but I get the same results.

Im using windows xp on one of the newer HP pavilion models (not sure what it is exactly). The other day I uninstalled the card and reinstalled it. It recorded fine after doing this but now its back to the state it was at in my other post. Now whenever I use a microphone it doesnt record anything at all except for static, but the monitor feature still works fine. Also, whenever I select line in as the input source and start recording, it only plays back through one speaker. Im starting to think that this card just plain sucks for recording. So many people have been having this problem and no one has found a solution. Creative needs to warn people about this because Im planning on taking this card back to Wal-mart.

Problems recording with Logic Pro 8

I just purchased an Aluminum MacBook 2.4 GHz (2 GB memory) and Logic Pro Studio. I couldn't justify spending the extra cash on a MacBook Pro as the specs are way too similar nowadays.......except for Firewire. I didn't think I'd need a Firewire port as USB 2.0 is supposed to be faster than Firewire 400. So I have an audio interface connected via USB 2.0 and a 1 TB external hard drive running at 7200 RPM also connected via USB 2.0. Problem is, each track in Logic takes forever to load before it records (i.e. I press record and have to wait like a minute before the recording begins), and subsequent tracks added are not recording or working properly. I'm recording everything to the external hard drive and now am thinking the USB 2.0 is not fast enough for recording processes. But if USB 2.0 is faster than Firewire 400, why should I be having this trouble? Do you need Firewire 800 to record to an external hard drive properly?
I'm beside myself thinking that I just purchased a $500 program and won't be able to run it on my MacBook the way I intended. It seems like the computer should be able to handle the workload of the program. Would swapping out the internal hard drive for a 7200 RPM drive work for recording as long as I immediately backed up the data on the external drive to save space? What about upgrading to 4 GB of memory? Will I have trouble regardless as long as I am recording several tracks on one song?
I can't tell if this is a hardware problem or not. Maybe my problem is I had this grand idea in my head that I'd be able to max out Logic Pro on a MacBook just like I could on a Mac Pro Desktop. But I've seen friends of mine max out Pro Tools on OLDER MacBook Pros; what gives? Any and all insight/help would be greatly appreciated.

Yeah i just reformatted the external hard drive and am going to attempt recording again tomorrow. I have a Seagate external drive that's supposed to be Mac compatible, but I've reformatted it twice. I've read that if the format is not correct then you're going to have recording problems. If that doesn't work then I'll try the internal HD and look into a different external drive.
I know that USB 2.0 is only "theoretically" faster than Firewire 400, but I'd like to find a USB external HD that is known to support the highest USB speeds available. But I dunno if USB 2.0 has a protocol that supports 2 way data transfer like Firewire, so I'm not sure how much it would matter.

Problems recording with MIDI in Garageband

I have a Yamaha DTXplorer electronic drumset and I'm using Garageband '09 with Mac OSX 10.5.8.
I connected my drumset to the computer using an M-Audio Midisport UNO ("plug-and-play" midi to usb). I plug in the "to midi out" to my drumset. When it's connected, the UNO "midi in" light is green and the "usb" light pulses.
Garageband doesn't recognize that there's a midi attached (under preferences it says "0 MIDI inputs detected"), but I can see the UNO in my "Audio MIDI setup" utility, so I know the computer is aware that the device is plugged in. What's more strange is that when I first plugged everything in, everything worked ok. The drumset would trigger notes in GB. That only lasted for about two days though, and now it won't work at all. I really don't think there's an issue with the cord itself though.
I'm not sure if I need a driver. I downloaded the 10.5.8 one from the M-Audio site, but nothing is working. I'm getting extremely frustrated that GB won't recognize the midi. I'm not great with computers and I'm pretty new to all this, so I'd really appreciate any help I can get...
Thanks in advance for any input on this.

Does your drum machine have a USB port? If so, you could go straight in via USB, not needing the MIDI adapter. The Mac would almost certainly recognise the drum machine, maybe needing a driver download. This happened with my Roland A300 Pro. I can use MIDI connections, but it's far more convenient and just as good to go USB. But this is just straight off the top of the head--you'd have worked out such a basic troubleshoot by now. Try a new driver from the Yamaha site, if available. Try a restart of the Mac with the gear plugged in (it has been known to work). Try a different cable, just in case. Try a different USB port on the Mac. These tend to be generic fixes, and success varies wildly. Finally, you're sure you're going MIDI OUT of the drum unit, right?

Captivate 8 Tin Can - problem communicating with the learning record store

When publishing a course to Tin Can format, what should I enter in the 'Identifier' field?
If I publish with the default 'Course_ID1' text, I get an error when launching the course on our LMS. Errors says "There was a problem communicating with the learning record store."

Hello,
Welcome to Adobe Forums.
Please share your contact information via [email protected]
Thanks,
Vikram Gaur
Adobe Support

PROBLEM AXIOM AIR 61 IN LOGIC, DON'T REPRODUCE SOMETIMES THE TRACK RECORDED WITH AXIOM AIR 61

I have some problems working on LogicX, cuz when i play the track that i recorded with the AXIOM AIR 61, sometimes don't sound nothing, and then when i put play again it sound the track, the think is that the LogicX. I don't know if it's a driver problem o something like that. Need Help Urgent!

Folks.... I eventually solved the problem so if anyone else is interested here is the solution.
The Axiom DirectLink for Logic/Garage band: Axiom_DirectLink_For_Logic_OSX_1_0_0-3.dmg
Should install a file called Axiom.bundle in the directory
MacintoshHD/Library/Application Support/MIDI Device Plug-ins/Axiom.bundle
In my case (see above) the file had successfully installed to that location. However, for some peculiar reason the permissions on the folder had been changed - current admin and users could not read or write. I have no idea how that happened. In any event, despite the fact that the file had been installed, when Logic was opened I was unable to see the Axiom as an available control surface to install.
I reset the permissions and the problem was solved!
It's only taken me a week to get there but now happy that it's OK. The Axiom612 isn't cheap!
I hope this helps someone else.

Problems Recording Video with Photo Booth

Macbook Details:
OS X Yosemite
Version 10.10.2
MacBook Pro (15-inch, Late 2011)
Processor 2.2 GHz Intel Core i7
Memory 4 GB 1333 MHz DDR3
Photo Booth: Version 7.0 (724)
Some background: It all started going downhill for my laptop when I got a "Service Battery" warning back in December. Thought it could possibly be a glitch from the new OS. In any case, they told me to wait it out till the Full Charge Capacity reaches the 2000s. It's currently at around 4225 and slowly steadily decreasing. I can't keep many applications open at one given time.
The problem: Built-in camera is working fine with Skype, FaceTime, etc. Photo Booth pictures are fine as well. Simply unable to record any video with PB. It will sometimes record, but during recording, the image freezes. Upon playback, the image is frozen for the entire video, and audio lags or skips around. Today it froze and actually sat frozen all day while I continued to use other applications.
Is there anything I can do??

You can't record video with PhotoBooth, you can record video with iMovie, or you can record with Quicktime if you have the Pro version. I would suggest using iMovie, create an MPEG-4 project, record your footage, drag your recorded clips into the timeline, then choose the Share menu and choose Email.
Baby footage will be on its way to the grandparents in no time!

Facing Problem in creation on Customer Master Record with reference

Dear SAP Experts,
I am making a New Customer master record with referenec to existing one. Account Group """ Stock Transfer - Depot""" do not use internal no assignment, we put external no to customer code. but when we enter the customer master with reference to existing one, system shows the error.....enter a no between A001 and Z999.
Customer Record Details-
Account Group - Stock Transfer Depot
Customer - 1101
Compnay Code- 1000
Sales Organisation - 1000
Distribution Channel -20
Division - 01
Reference:
Customer - 2001
Comapny Code - 2000
Sales Organisation - 2000
Distribution Channel - 20
Division - 01
Error: ENTER A NO BETWEEN A001 AND Z999
I m not getting why system showing this type of error, should i need to configure new customer code sumwhere in IMG if yes please let me know.
Lokking forward for your quick response on the same.
Regards
Parul Deshwal

Hi Parul Deshwal,
- The number range is created in XDN1.
- The number range is assigned to the account group "Stock Transfer - Depot" in SAP Customizing Implementation Guide>Financial Accounting>Accounts Receivable and Accounts Payable>Customer Accounts>Master Data>Preparations for Creating Customer Master Data>Assign Number Ranges to Customer Account Groups
Remember - If you are entering an external number it generally means the number is created in an external system and replicated to your system.
Help - Check what external number was used last by doing SE16 on table KNA1 and use the account group "Stock Transfer - Depot" as a selection parameter.
Best regards,
Glynn

Problems updating BP record with SOAP

Trying to update a business partner record with the SOAP env. below I get the error message: "Key not supplied". Where in the XML should I insert the key (CardCode) of the business partner I wish to update?
<?xml version="1.0" encoding="UTF-16"?>
<env:Envelope xmlns:env="http://www.w3.org/2003/05/soap-envelope">
<env:Header>
<SessionID>A9DE2062-4F96-F9E1-DE3C-81E0DB23F174</SessionID>
</env:Header>
<env:Body>
<dis:UpdateObject xmlns:dis="http://www.sap.com/SBO/DIS">
<BOM>
<BO>
<AdmInfo>
<Object>oBusinessPartners</Object>
</AdmInfo>
<BusinessPartners>
<row>
<CardCode>31177</CardCode>
<FederalTaxID>987280115</FederalTaxID>
</row>
</BusinessPartners>
</BO>
</BOM>
</dis:UpdateObject>
</env:Body>
</env:Envelope>

For those interested I succsesfully managed to update a business partner record with the follwing XML:
(Replace $session_id with valid session id)
[code]<?xml version="1.0" encoding="UTF-16"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
     <env:Header>
          <SessionID>$session_id</SessionID>
     </env:Header>
     <env:Body>
          <dis:UpdateObject xmlns:dis="http://www.soap.com/SBO/DIS">
               <BOM>
                    <BO>
                         <AdmInfo>
                              <Object>2</Object>
                              <Version>2</Version>
                         </AdmInfo>
                         <QueryParams>
                              <CardCode>30001</CardCode>
                         </QueryParams>
                         <BusinessPartners>
                              <row>
                                   <ZipCode>5265</ZipCode>
                              </row>
                         </BusinessPartners>
                    </BO>
               </BOM>
          </dis:UpdateObject>
     </env:Body>
</env:Envelope>
[/code]

Problem viewing videos I recorded with the phone

When trying to view videos I recorded with the phone, It gives me a message saying it is impossible to view this multimedia file format!
It has been recorded with the phone and it can't watch it on the phone!? It doesn't recognize its own recording format
Help please

If the format is in 3GP you can view it with a player called VLC (http://www.videolan.org/vlc/), or can try a video conversion program to convert it into a format your computer can read. Once such program can be found here http://www.avs4you.com/AVS-Video-Converter.aspx
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

How to fix this problem? Secure Connection Failed, SSL received a record with an incorrect Message Authentication Code. (Error code: ssl_error_bad_mac_read)

Secure Connection Failed
SSL received a record with an incorrect Message Authentication Code. (Error code: ssl_error_bad_mac_read)
I have been receiving this error message recently when I tried to access school elearning websites and other school related websites, I have also tried on internet explorer and it shows page cannot be displayed. I have been trying the available solutions to solve it but none of them work. Is there alternative solutions available? Please advise. Thanks.

It works after I disabled IPv6 in Firefox. Thank you for your help :)

Problems with recording with Audigy 2 ZS Notebook pls pls help????

hi
!!! I am try to fix a record from a dj mixer to my Audigy 2 ZS Notebook...every is set ...from the mixer i am using 3.5 mm strero? 2 st RCA to the Audigy 2 ZS Notebook...but when i click record i donot get any signal in ...i am try to record through line in on the record program. but when i try to record with a anther program" sony" its works ....but not the Audigy 2 ZS record program ...pls help ...
mike

jkeener7 wrote:
Thanks I went ahead and got some Logitech Z5500 speakers.
Hi
Did you not looked "Audigy 2 Zs Notebook's" User's Guide?
jutapa

Problem recording with WaveStu

Similar Messages

Maybe you are looking for