Problem Regarding indexes
BR301E SQL error -1502 at location stats_tab_collect-4
ORA-01502: index 'SAPDAT./BIC/B0000111000~0' or partition of such index is in unusable state
BR886E Checking/collecting statistics failed for table/index SAPDAT./BIC/B0000111000
BR301E SQL error -1502 at location stats_tab_collect-4
ORA-01502: index 'SAPDAT./BIC/B0000356000~0' or partition of such index is in unusable state
BR886E Checking/collecting statistics failed for table/index SAPDAT./BIC/B0000356000
BR301E SQL error -1502 at location stats_tab_collect-4
ORA-01502: index 'SAPDAT./BIC/B0000357000~0' or partition of such index is in unusable state
BR886E Checking/collecting statistics failed for table/index SAPDAT./BIC/B0000357000
how to create or repair these indexes.
please let me know.
Hi,
Was searching something and found yours and the following link:
db stat warnings
Regards,
siddhesh
Similar Messages
-
Problems with Indexing and Classification
hi KM Gurus,
We faced some problems in Indexing and Taxonomies for which I would like to know the solution/reason.
(1) We tried providing query based classification in which the query condition which is based on the "Content" alone worked for us. Whenever we tried specifying conditions based on "file extension" or "title", it didn't work out. Did that work for anybody else?
(2) Also we are not able to get any proper info about the various options that are available while creating a query based classification. For example, there are two options like "title" and "string title". But we donno the difference b/n the two. If it works out we can find the difference. But it is not working too. So we are not able to find the difference between the two.
(3) And I tried setting the crawler parameter of my own instead of the standard crawler. But the index was found to be inactive when i set that to my crawler and it worked fine with the standard crawler. I am not able to make it active. Any clues behind this?
Expect all your guidance and help.
best regds,
alagammai.Hi Alagammai,
concerning issues (1) and (2).
Normally the mentioned properties are displayed as 'Name' and 'Namme as String'.
These two properties are(in most cases) the title of the document.
One is indexed in 'Text' format. The other one in 'String' format. That results into different opportunities within the query based classification.
'Displayname as String' can be used to sort documents alphabetically: A, B, ... into categories.
'Displayname' allows you to do a linguistic scan on document titles.
To separate file types I would use the property MIME-Type.
But you may try to define a query *.doc for the property 'Name as String'.
Regards Matthias -
Does anybody have this update problem?
index-lion-snowleopard-leopard.merged-1.sucatalog could not be found on server swscan.apple.com
Is there a solution?You can send feedback to Apple here > Apple - Mac OS X - Feedback
Including the link to this thread may help > https://discussions.apple.com/message/16092403#16092403
I'm seeing numerous posts regarding this issue also. -
Wierd problem regarding JInternalFrames and OUTLINE_DRAG_MODE
Hi there,
I'm currently experiencing a strange problem regarding the use of a JDesktopPane and JInternalFrames.
Code may look as this, its a random Example as I encounter the same results no matter how I construct the Frame and so on:
public class Example extends JFrame{
public Example() {
this.setTitle("Example");
this.setPreferredSize(new Dimension(800,800));
this.setLocationRelativeTo(null);
this.setDefaultCloseOperation(EXIT_ON_CLOSE);
JPanel contentPane = (JPanel) this.getContentPane();
contentPane.setLayout(new BorderLayout());
JDesktopPane dp = new JDesktopPane();
dp.setDragMode(JDesktopPane.OUTLINE_DRAG_MODE);
contentPane.add(dp, BorderLayout.CENTER);
this.setVisible(true);
JInternalFrame f = new JInternalFrame("not so cool", true);
f.setPreferredSize(new Dimension(400,400));
f.pack();
dp.add(f);
f.setVisible(true);
public static void main(String args[]){
Example ex = new Example();
}So, I'm currently using Netbeans and when I'm running any application/project with those settings from inside the IDE
theres absolutley no problem. As soon as I'm running the Jar file, the drawing of the "outlines" while resizing the InternalFrame
is kinda laggy and choppy as hell. I spent 2 hours of googling now and I still got no idea why thats the case, so I hope anyone
here can enlighten me.
The Java version installed is 1.6.0_10
regards, meAndrewThompson64 wrote:
(shrugs) Maybe the IDE is using -Dsun.java2d.d3d=false? In any case, very few people around here provide support* for IDEs.
* Read that as 'speculate on why an IDE does it different - why it works in an IDE'Sir, seems like you got the point, I wasnt familiar with those command line options for the VM before, regarding Graphics options.
Working fine as soon as I disable D3D. Should've come to that myself but oh well -.-.
Thanks guys! -
Problem regarding installation of drivers of hp m1005 mfp on windows 8.1(64 bit)
i am facing problem regarding the installation of the drivers on my new windows 8.1 pc.
i have already downloaded the full solution present on the website twice but found my efforts in vain.Hello @naga_akkireddi , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 and Java 2 SDK ( Ver 1.3 Beta)
After the installation of Oracle Lite 3.6.0.2.0 on a laptop (with WIN 95 OS), When I run Oracle Lite Designer from start menu, I receive following error message :
====================================
Invalid class name 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
usage: java [-options] class
where options include:
-help print out this message
-version print out the build version
-v -verbose turn on verbose mode
-debug enable remote JAVA debugging
-noasyncgc don't allow asynchronous garbage collection
-verbosegc print a message when garbage collection occurs
-noclassgc disable class garbage collection
-ss<number> set the maximum native stack size for any thread
-oss<number> set the maximum Java stack size for any thread
-ms<number> set the initial Java heap size
-mx<number> set the maximum Java heap size
-classpath <directories separated by semicolons>
list directories in which to look for classes
-prof[:<file>] output profiling data to .\java.prof or .\<file>
-verify verify all classes when read in
-verifyremote verify classes read in over the network [default]
-noverify do not verify any class
-nojit disable JIT compiler
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
====================================
My ORACLE_HOME is c:\program files\ora95_2 and Oracle Lite is installed under the ORACLE_HOME in LITE\DESIGNER directory.
JDK version is 1.1.8 which is greater than 1.1.4 installed in c:\program files\jdk1.1.8, My PATH, and CLASSPATH are set in AUTOEXEC.BAT as follows:
set CLASSPATH=c:\Progra~1\jdk1.1.8\lib\classes.zip;c:\progra~1\ora95_2\lite\classes\olite36.jar;c:\progra~1\ora95_2\lite\designer\oldes.jar;c:\progra~1\ora95_2\lite\designer\swingall.j ar
PATH=C:\Progra~1\Ora95_2\bin;.;c:\Progra~1\jdk1.1.8\lib;c:\Progra~1\jdk1.1.8\bin;C:\Progra~1\Ora95_2\lite\Designer;C:\WIN95;C:\WIN95\COMMAND;C:\UTIL
And, I can run JAVA.EXE from any directory on command prompt.
With JAVA 2 SDK (ver 1.3 Beta) instead of JDK 1.1.8 I'm getting a different Error message as follows:
=============================
java.lang.NoClassFoundError: 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
==============================
the PATH and CLASSPATH were set accordingly, as with JDK1.1.8, and there was no classes.zip in classpath
also the class file or the jar file looks weird or wrapped in the error message : 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
Another interesting thing I noticed is if I run oldes.exe from Installation CD, the Oracle Lite Designer runs fine, and without error, I'm able to modify tables in the database of my laptop also.
Could someone shade some light on what am I doing wrong here ?
Thanks for help in advance .
Regards
Viral
nullOn 07/20/2015 06:35 AM, Itzhak Hovav wrote:
> hi
> [snip]
> [root@p22 eclipse]# cat eclipse.ini -startup
> plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
> --launcher.library
> plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
>
> -showsplash
> org.eclipse.platform
> --launcher.XXMaxPermSize
> 256m
> --launcher.defaultAction
> openFile
> -vmargs
> -Xms40m
> -Xmx512m
> [snip]
Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
sticky posts at forum's top for getting started help. -
I am sonu v s from india...i am a apple id user...now i have a problem regarding this apple ID...i forget my apple ID security question...so i can't access and purchase any apps by using my apple ID..4 times i frwd my reqst using itune apps store but i can't get any solution....many times i my try to call u bt there is no response from ur custmr support group...pls kindly give me any solution
Contact the App store for Apple ID help. Their support link is on the right of the App store window
LN -
I have a problem regarding sales order line item with confimed quanity
Hi Experts,
I have a problem regarding sales order line item with confimed quanity with '0' with delivery block but confirming the sales order quantity once the order is released from credit check.
The situation arises as per the below scenarios.
Scenario - 1 - When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx and the order is set with credit check. Once the order is relased from the credit check. The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
Scenario -2- Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
Maintain the stock for the line item 2 ( 5 Pcs).
Once the order is released from the credit check. Then for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
Can you please help me how to solve this issue.
Looking forward for your reply.
Thanks and Regards,Hi,
I agree with your point. In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check. Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5, But it should set to Zero quantity. Quatity should not be get confirmed it should be Zero Quantity.
Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok. But we dont want to remove the - Confirmation Block tick mark
Please any one can help me if you have any solution to solve this problem.
Thanks and Regards. -
Problem with index in merged projects
Dear Sir,
I have a problem with index in the master project, I can only
view the master project index keywords under the index tab. My
master project contains 2 topics besides the other sub projects. I
have created index for all sub projects indvidually and at the end
I created the master project index.
I made sure that the 'Binary Index' flag is ticked before
compilation and stil the problem is on, do somebody know what could
be the problem.Hi,
Two points here.
Firstly, you can duplicate SSL's. (Right click on an SSL in
the projects sub-directory and select the duplicate layout option.
This will give you a copy of the original SSL).
I tend to have two SSL's - one is local and I use that every
time I test compile the project when I'm working on it.
The other is set to output to the master project. I use that
once I'm happy with the sub-project and start working with the
master project.
Second point is to be aware of how RoboHelp treats the
imported/merged .chm files from the sub projects.
It imports them into the main project master directory - then
when the master project is compiled it puts a copy of them into the
master project SSL. However, if you re-compile it doesn't overwrite
the files that are already in the master project SSL directory.
This is why you have to be aware of where the sub project
.chm files are going - you need to make sure that if you revise the
sub projects, a fresh copy of the .chm files ends up in the output
SSL directory of the master project. -
Problem Regarding Creation of Compound field
Hi all,
I have a problem regarding creation of a compound source field.
My source field is say for eg. SF1 and SF2
Destination Field is a look up flat field say LF which has 2 display fields D1 and D2
I mapped SF1 to D1 and SF2 to D2
But when i right click at source and select 'Create compound field' for SF1 and SF2, the compound field is not created automatically.
Can anyone give me a hint as to why is this happening?
Regards,
RoshaniHi Roshani,
Just check for couple of other things, like
1) I hope its not a qualified table and none of those fields are qualified.
2) None of the fields are ther currently in the matching set in the next tab.
3) You didnt map the main filed (look up table filed, which is there as a sub-table name)
4) There are no more display fields for that table.
I hope it should be one of the above issues. please check for them.
Cheers,
Cherry. -
Problem regarding the creation of Table using CSS.
Hi ,
Here I have a Problem regarding the creation of Table using CSS.
In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
width:900px;
height : auto,
Overflow : visible,
Max-height: : 200px.
If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
Thanks & Regards
MadhaviHey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?
-
ys can you help me, i have problem regarding on syncing of my apps in my ipad it usually stops on step 4 saying determining apps to sync then its stop... can anyone have an idea..i already reset the setting of my ipad
Hello Violet03,
Thank you for using Apple Support Communities!
I would recommend a few things here. If you havent already restart both your computer, and the iPad.
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
If that doesnt work then close all the apps that are running on the iPad with this process:
From the Home screen, click the Home button twice.
Tap and hold on the app.
When it starts to jiggle, tap the to close it.
Double-click the Home button and try opening the app again.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
And if the issue persists it might be a good idea to backup and restore your iPad in iTunes with this article.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
All the best,
Sterling -
hey my iphone 4 has a problem regarding carrier. Its always showing searching mode and wifi-address N/A and Bluetooth address 00:00:00:00:00 and call function is disable. Please help me. I have tried every thing ..like restore from DFU mode with out sucess.
Refer to Note 98458 - SAPMSSY1, CALL_FUNCTION_NOT_FOUND
-
Buget Exceed problem regarding material transfer in project system
Hello Sir,
I have a problem regarding budget in project system.
when i do budget and release . and do any transaction
with that budgeted wbs element in particular project.
i get budget excced errors usally.
however, budget remains more than exceeded buget.
Let us touch with a example in brief, we have a buget for a L&T project 10 Lakh.
Buget Release actual cost total cost commitment
10Lakh 10Lakh 8lakh 1Lakh
when i transfer a material from another project to this L&T project material worth is 50thousands.
i get a errors for L&T project budget exceed with 40thousands.
however in project budget remains 1Lakh remaining .
why system shows errors for this material transfer worth rs 50thousands
Please help me regarding this problem where is 1lakh budget
with regards
sanjay agrawalHello sir,
there is no any problem regarding budget supplement but if project sometimes
remains 20lakh buget price remaining out of 50lakh.
and need 1 lakh material price for transfer in project
then why need to do budget supplement for 1 lakh if project
remains 20lakh price rest.
please guide me for above problems
with regards
sanjay agrawal -
How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.
Click here for the instructions on stopping the emails.
(85713)
Maybe you are looking for
-
How to create a single SCN [Inbound Deliery] ' VL31n ' for multiple PO's
How to create a single SCN [Inbound Deliery] ' VL31n ' for multiple Purchase-Orders with the help of BAPI or BDC Recording in 4.6 b version. Manually its possible.. but how is it possible in the background i.e through BDC Recording or BAPI's. [
-
Can't view most folders in icon view, it just crashes.
When I try to do icon view in most folders, finder freezes and restarts. But the strange thing is that icon view works in most sections of my home folder. http://www.youtube.com/watch?v=DjyHbiO_cY4
-
SOLVED!!! Couldn't install/ uninstall Quicktime....
Have noticed a few people with the same problem so here goes... After installing MS installation clean up utility and with some help from this thread... http://forums.techguy.org/multimedia/420942-cant-run-uninstall-quicktime.html?t= 420942 I managed
-
No point of using Skype.. calls are getting drop f...
No point of using Skype.. calls are getting drop frequently.. I have waisted time and money too here. My calls are getting dropped again and again.. now i am thinking how to finish available balance. anybody can suggest me how to use my rest money be
-
LR 4 Upgrades and works perfectly
Just like to say thank you to the LightRoom team for a wonderful release of stable, fast product. I might add that the 2012 process is much better and it is easier to 'tune' photos. Just for the record I use the following hardware and all I did was u