Problem regarding Same Sender interface and Diff receiver channels

Hi Friends,
i am usina IDOC-File Scenario. I have 9 different target strctures for which same idoc type has to be mapped.
the problem came when same business system and with one interface XI doesnt allow to create multiple receiver determinations.
i have 9 communication channels for 9 diff structures which belong to same business system(Target) as i am using variable substitution for naming.
How Could i over come this problem of defining several communication channels in one receiver determination..or any other alternate sollution kindly suggest please

Later part of 9 interfaces in one interface determination has been done already..
But while specifying receiver determination we need to enter the receiver agreement rite? out of these 9 recvr agreements what needs to be filled in there?

Similar Messages

PI 7.1Error between the sender interface and the receiver (abstract)interf.

Hi all,
I have been receiving an error in configuring the step of type receiver (BPM). More exactly I receive the following error message about the pipeline to the adapter between a third-part sender and a BPM receiver. The sender interface does not known the receiver interface.
BPE_ADAPTER">UNKNOWN_MESSAGE</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No object type found for the message. Check that the corresponding process is activated</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any help will be well appreciated.
Many thanks in advance for your kind support.
Regards,
Giovanni

looks like message interface is not able to identify by the integration engine ,Check that the interface name and namespace of sender are coming as of expected
if not this provide more details
Rajesh

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

Thanks for you reply.
But actually I don't want to show the \ (backslashes) to the user in my text box.
Ok let me elaborate this problem little more.
I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark).
Regards,
Waqas Ahmad

Soap sender adpater issue missing sender interface and namespace in the msg

Hi Expert,
I got a problem when try to using soap sender adapter.
Here is the sceanrio:
Http web service client call ---PI soap sender adapter -some routing data-business system inbound.
Sytem information:
SAP_ABA     700     0019     SAPKA70019     Cross-Application Component
SAP_BASIS     700     0019     SAPKB70019     SAP Basis Component
PI_BASIS     2005_1_700     0019     SAPKIPYJ7J     PI_BASIS 2005_1_700
ST-PI     2008_1_700     0001     SAPKITLRD1     SAP Solution Tools Plug-In
SAP_BW     700     0021     SAPKW70021     SAP NetWeaver BI 7.0
ST-A/PI     01L_BCO700     0000          -     Servicetools for other App./Netweaver 04
Here is my problem. I use soapui trigger a test msg to PI system. But in the sxmb_moni, only sender service is there.
The sender interface and sender namespace is missing. And the msg has error called: :INTERFACE_REGISTRATION_ERROR.
Which means I do not have a inbound interface to process the msg.
But I suppose to redirect the msg to business system.
Here is the configuration:
reciever determination: soap sender service, soap outbound interface, soap interface namespace --> reciever business sytem.
Interface ditermination: soap sender service, soap interface --> receiver interface, receiver namespace.
Sender agreement: soap service, soap itnerface --- soap communication channel
receiver agreement, soap service---> receiver sevice, receiver interface, reciever namespace and reciever cummunication channel
define of soap sender adapter:
soap sernder, with use encoded header and use query string checked and qos as exactly once.
Anyone has any idea here? Many thanks! And most strange thing is yesterday it works and today it failed.
Please kindly help here.
Thanks a lot,
Leon

Hi guys,
thanks for the input.
Hi Sven,
I have input default interface and namespace.
Hi sivasakthi,
Regarding mistype, it may happen, I will do it again right away.
And the URL is generated by the wsdl toolkit in the directory.
I marked use encoded header and query string in the communication channel.
I will generate the wsdl again and test it again.
Regarding URL(endpoint of web service):
http://hostname:50000/XISOAPAdapter/MessageServlet?channel=:AGSSAL_SOAP:AGSSAL_SOAP_CC&version=3.0&Sender.Service=AGSSAL_SOAP&Interface=urn:a1s_saplivelinkcontent.service.sap.com^MI_O_AS_DELIVERNOTIFY_SOAP
Again thanks for you guys help.
Best regards,
Leon

5 Sender communication channels and 1 receiver channel

My scenario demands to handle 5 different select queries from single data base.
I need to have 5 sender communication channels for editing an employee and only 1 receiver channel at receiver side and i'm using one common Functional module to handle.
Can i handle the above situation in one single interface??? like having 5 sender communication channel at sender side and 1 receiver communication channel at receiver side??
Thanks
LN

like having 5 sender communication channel at sender side and 1 receiver communication channel at receiver side??
Yes it is possible....if it is not possible for you to combine the query into one.
How is the data to be processed? Is the data pulled by the 5 sender channels, to be merged into one target message? Is yes then you have to make use of a BPM.
If the Data from 5 sender channels will be individually forwarded to the receiver channel then there is no need of a BPM.

My phone isn't sending texts and only receiving some and I can't ise any Apps or Safari on cellular data.

My Iphone 4S isn't sending texts and only receiving some incoming text messages. My cellular data is turned on but it still won't let me use safari or any other App unless i'm connected to the WIFI at home. Any help would be much appreciated.

I think I can help with the Cell usage issue.
You may in fact have cell data turned on, but it may be turned off for specific apps.
Please go to Settings...Cellular.
First, ensure that Cellular Data is turned on.
Next, scroll down the page and you should see a list of all your apps.
Make sure Cell data is turned on for the apps in question.

PI 7.1 Sender Interface and Receiver Interface gets interchanged

Hi All,
I m facing a strange problem in PI 7.1
For many of my scenarios, the Sender Interface, sender namespace and receiver Interface, receiver namespace information gets interchanged and displayed incorrectly.
But sometimes its working fine.
When we analysed the Log messages, found that, after xml validation step, the sender and reciever interface gets interchanged.
Any idea why this happens?
How to rectify this error?

Aarthi,
Please check your message interfaces once again. Sender is outbound and Receiver is inbound.
Also please check your receiver determination.
Regards,
---Satish

Three sender systems and one receiver

Hi Experts,
In my scenario I have three sender R/3 systems and one receiver file system.This is Idoc-XI-File bypass scenario.
Idoc can get trigerred from any one of these R/3 systems and reach the file system via XI without any mapping or routing.So I didn't touch any of the IR objects.
In ID,
I have created three business systems for three senders and one business service for receiver file system.
I have created three receiver determinations,three interface determinations and three receiver agreeements.I have created one receiver communication channel.
All the ALE configurations are correct.
The Idoc is reaching XI system when I trigger from any one of the R/3 systems but the error it is showing is <b>no receiver could be determined</b>.
Can any one of you through light on where I have done the mistake .
Regards,
Lokesh

Lokesh
Can you pls. try these two different options & let us know the result -->
Option 1.
Design this scenario as 1 Sender & 1 Receiver and check whether you are able to create the IDOC xml in Receiver System. With this atleast we can say that rest of the configuration are correct.
Option 2.
For the Receiver System, create 3 different Business Services & now map each of them with 3 Senders individually. I mean in this case also you will create 3 Rec. Determinations but now receiever is going to be different in each of them. Then in File Adapter you can actually mention the same location path.
- Lalit -

How to keep same sender file name for receiver mail attachement

Hi,
i am working with File to Mail scanario. There i want to pick a flat file from native file system and then send it as email attachment. Now i am able to send the file but the flat is getting converted as an xml file. is there any method to keep the same sender file name and type for receiver mail attachment. i am not using any mail package. i am using XI payload and keep attachments.
Thanks in advance.
-Siva

Hi,
Yes,With out using the mail package u can send the Mail Attachments to the receiver side,
In that case no need of Integration Repository objects.
Chck this links.
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure
/people/community.user/blog/2006/09/07/email-reporting
/people/community.user/blog/2006/09/08/email-report-as-attachment-excelword
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter
If u dont get ur requirement then let me know ur Mail id i will send u a Doc.
Regards,
Phani
Reward points if Helpful

Is Email Send ONLY and NOT Receive Possible?

I know that mail uses both Pop and SMTP servers to recieve and send, respectively, email. Is it possible to set up the SEND only portion of an email account on an iPhone so that the user doesn't need to manage incoming junk email but can still send OUT email messages when needed? Do I just leave the Pop server info out???

You could also set up your desktop mail program to delete the mails as soon as you downloaded them to your computer and the phone to never delete after downloading.
The last time I had to set up my account again, I choose the wrong identification in the advanced menu and never received mail, although there was mail waiting on the server to be delivered. I did not notice at first, because there was no error popup. Maybe this also works with your provider.

I downloaded iOS 6.1.2 and now I don't receive any of my notifications despite they are all on. Also iMessage is failing so much! I'm never able to send texts and I receive hours late the ones that are sent to me. Is anyone else having this problem?

What can I do?

I have been having the same problem as well...I dont know whats going on?!

Send email and the receiver has duplicated text in same email

Hello, Something has really been bothering me. I'm trying to send a email trough Mountain Lion email and my gmail. I copy and paste a letter from word and its in the proper format and looks perfect. The text in the right place and only one version of it. I cc Myself on the email and when I open it has the letter I wrote Twice seperated by 2 line breaks and the bottom one is in different text format. I of course don't want this and cant figure out how to prevent this. Pease help. Thanks so much

It is likely that the pasted text is in rich text format, and an automatic Plain Text alternative is created.
However, I'm not sure how to stop that from happening.
Some people only view emails in plain text, so the plain text alternative is created so that they can see the text of the email.
If you don't need the formatting, you could convert the entire email to plain text before sending.
Why you are seeing both html and plain text, I don't know either.

Problem with file sender adapter and endSeparator

Hy,
have the following situation: with a sender File adpater i have to receive the same structure of data but in two mode.
1) First mode : each recorset is defined as a file line
   Example (not fields separator):
   fielda,fieldb,fieldc
   field2a,field2b,field2c
2) Second mode : recorset of the same line without end
    separator and fieldseparator
   Example (not fields separator):
   fielda,fieldb,fieldc,field2a,field2b,field2c,......
I configured the adapter as follow.
structure.fieldFixedLengths      1,2,3
structure.fieldNames             field1,field2,field3
structure.lastFieldsOptional     YES
structure.processFieldNames      fromConfiguration
structure.endSeparator           'nl'
PROBLEM
Mode 1) works but mode 2) doesn't work.
Could anyone solve my problem??
Thank's
Mati

Hi,
Try using two differnt record structure name for each mode.for eg give it as structure1 and structure2.then u give the content conversion parameter for both the recordset depending on ur requirement i.e, with and without end seperator.
regards
jithesh

Sending txt and the receiving end person get it saying is from someone else

I updated my husband's iPhone 3GS to io5 and now he send a txt message and we get it but is tell us is from my dauthers iPhone so it said from her number or her email address ....we all use the same store email wich is my dauthers email but even logginoff from the stores still happens but he is the only one having this problem...HELP PLEASE

No disrespect intended, but if I could see the address I'd have used it long ago - and it was not included in bccs (which have their own problems under this awful system - it's amazing how such a great machine coud come with such a poorly thought out mail program), it was listed in ccs only as part of "and 2 more". I have at this point figured out that a practical work around is to start a "reply to all" which shows the address I want to capture, then just delete the started note - but it's silly to have to do this and hard to understand why I shouldn't be able to instruct the system to just show all ccs. So the question, I guess, is can I and I'm just missing it? I do appreciate your taking the time to answer.

Problem regarding difference in FS10N and FBL3N

Dear Friends,
We are facing a problem where the balance of FBL3N does not match with balance of FS10N for all reconciliation accounts for vendors (K). In fact FS10N itself the cumulative balance for a particular month doesn't match with line items if we go from the same report.

Hi,
1)FS10N will also carry opening balance of the year...hence the balance of FS10N will not match with FBL3N because FBL3N for current period/year line item display without opening balance.
2) If FS10N itself is not correct means...may be of morethan one currency could have involved for the same GL.
Regards/Velumani

Problem regarding Same Sender interface and Diff receiver channels

Similar Messages

Maybe you are looking for