Problem regarding the Payloads in IDOC to file scenario

Hi All
My scenario is IDoc to file where I use to get 5 IDocu2019s (in it there will be 10 segments) at a time and in one IDoc there will be only 9 segments, and that IDoc (with 9 segments) must be the last payload (I.e. file) at the target side (i.e. IDocu2019s with 10 segments must be at the first and the IDoc with 9 segments must be at last in the target payload).
Thanks in advance

Hi,
as the thread is marked as question you should not forget to ask something
Regards,
Udo

Similar Messages

Regarding remote login in IDOC to FILE Scenario

Hi Friends,
 I have been struggling from this issue from many days.
when i am doing IDOC to FILE Scenario, i was posting an CREMAS03 IDOC from ECC client 800 to SAP XI Client 001.
 After executing WE19 in SAP ECC, its automatically asking for XI login detals.
will it really ask for login details.
Because if we do FILE to IDOC Scenario, it wont ask for login details.
 If i check RFC destination from XI to ECC, we could easily remote logon to ECC without asking for any logon details, but if i check RFC destination from ECC to XI, its asking for Lodin ID and Password.
Regards,
Varun Reddy.K

HI Varun
Check the roles assigned to you.
The roles are...SAP_XI_ADMINISTRATOR and SAP_XI_DEVELOPER.
If u have created the user in SU01 just now..and checking logon to IB immediately ..it will not come cos it takes some time for the users to get reflected in JAVA stack.
Cheers..
Vasu
** Reward Points if found useful **

How can we do the Testing in Idoc to File Scenario( With out using We19)

Hi All,
As all we know we can generate the Idocs from SAP R/3 to XI using the change Pointers,this we will apply in Production time.
But as of now in the Test system we can'd do it daily.
So we have already created materials in the SAP R/3 system.
I want to send the Idoc to XI by selecting some n number of materials.means i want to generate the Idoc for materials.this is like i have to do repeatedly for testing purpose.
Is there any T-code
How can we do this
Regards

Hi Vamsi,
   For the Message Type ORDERS you can configure Output Type (txn NACE) for IDoc generations and then you can trigger the IDoc using transaction WE15.
Selection Parameter will be as follows
Output application: This will be from Output Type
Object key          : Order Number
Output type         : Output Type name, that you configured
Transmission medium : A
Check the checkbox "Send Again".
Thanks,
Punit

Idoc to file scenario( I dont want acknowledgements )

Hi all,
where i can disble the acknowledgements in idoc to file scenario.
Kiran

Hi,
If you want the ack..
Go throughthis steps..
go to transaction SXMB_ADM on XI SAP system
Choose Integration Engine Configuration
Select "Execute"
Choose "Specific Configuration"
choose New Entries
Select :
Category : RUNTIME
Parameters : ACK_SYSTEM_FAILURE
Current Value : 1
and save it.
The below link contains everything about IDOC acknowledgments
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
Might help you..
Regards,
vasanth

IDOC to FILE scenario With Screen shots

CAN YOU PLEASE SEND US THE DETAILS OF IDOC to FILE scenario With Screen shots and do the needful for me

Hi Surya,
I thought i will just share a few basic thoughts that you need to take care while doing an IDOC to File Scenario. Just see if it helps you in anyways.
While doing an IDOC -> XI -> File scenario, The Points to noted are:
1. You dont need a DT, MT or a message interface for the IDOC as it itself acts as the Message Interface.
2. You import the IDOC and use the same in your mapping.
3. In this configuration note that you dont have a sender agreement as you dont have a sender IDOC adapter.
If it is that you wanted to send an IDOC from XI (File to IDOC) , then in this case:
points 1 and 2 will remain, but the 3 will not. You will need a sender agreement for the file and a receiver agreement for the IDOC.
IDOC -> File scenario ref:
<a href="/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters scenario</a>
File -> IDOC ref:
<a href="/people/anish.abraham2/blog/2005/12/22/file-to-multiple-idocs-xslt-mapping to IDOC</a>
To be able to trigger your IDOC from the SAP ISU system, you will have to set the partner profile in we20. Select your Business System (mostly under Logical system) and then create Outbound entries for whichever IDOC you want to trigger.
You define your basic type also in your partner profile settings, Please go thru the following links to get a better idea about partner profile:
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b833243d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b7cd343d711d1893e0000e8323c4f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/32/692037b1f10709e10000009b38f839/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/5e/b8f8bf356dc84096e4fedc2cd71426/frameset.htm
Also, I would suggest that you go through this blog by michal if any issue arises,
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions
Also have a look at these forum threads...
IDOC TO FILE SCENARIO
idoc to file scenario
I hope this helps.
Regards,
Abhy Thomas

Idoc to file scenario doc

Hi,
Can anybody share the document of IDOC to File Scenario for Vendor Master.
Regards,
Balaji

Hi Balaji Permi ,
Check these websites which wil answer u'r question:
A Step-by-Step Guide on IDoc-to-File Using Business Service in the XI Integration Directory
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
How to convert an IDoc-XML structure to a flat file and vice-versa in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Introduction to IDoc-XI-File scenario and complete walk through for starters.
IDOCs (Multiple Types) Collection in BPM
IDOCs (Multiple Types) Collection in BPM
cheers!
gyanaraj
<removed by moderator>
Edited by: Mike Pokraka on Aug 12, 2008 3:07 PM

FIle Content Conversion Problem in IDOC-XI-File Scenario

Dear All,
I am doing IDOC-XI-FILE scenario.
I am facing one problem related to File Content Coversion.My requirement was to generate a dynamic file like %store_code%_%current_date%_sitemaster.xml , I have completed the dynamic generation successfully .
Now there is slight change in the requirement ,we have to suppress the current_date node of the xml content . i have tried to suppress the current_date using these DATE.fieldFixedLengths 0 , Date.fixedLengthTooShortHandling Cut , But I am unable to suppress it Can some body provide me the details on this .
The output xml version generated by Reciever file adapter is as below :
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
</ns0:MT_SITE_MASTER>
Plz provide me the code I have to write in the file content conversion .
Thanks in advance
Regards
Prabhat

If u see my earlier reply, I mentioned that u can not suppress the field from the one node.i.e Form SITE_DATA data type u can not suppress the field called CURRENT_DATE.
My suggestion is that , modify the Data type in such a way that you will be having two nodes as I have mentioned earlier. Then use the Suppress Logic for the Current Date.
So it will look like this-
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_SITE_MASTER xmlns:ns0="http://sample-xitest.com/sitemaster">
- <SITE_DATA>
<STORE_CODE>N002</STORE_CODE>
<TITLE_MEDI>Company</TITLE_MEDI>
<STORE_NAME>Mount Road</STORE_NAME>
<STREET>Chennai</STREET>
<COUNTRY>IN</COUNTRY>
<SALES_TAX_NO>12345678910</SALES_TAX_NO>
</SITE_DATA>
<CURR_DATE>
<CURRENT_DATE>20051105</CURRENT_DATE>
</CURR_DATE>
</ns0:MT_SITE_MASTER>
So ur SITE_DATA is not having a field called CURRENT_DATE. This field is in separate node (segment ) called CURR_DATE. Now u can use the Suppress Logic for the same like this.
CURR_DATE.fieldFixedLengths - 0
CURR_DATE.fixedLengthTooShortHanling - Cut
And in your Variable Substitution you can use the date from the other segment called CURR_DATE.
Hope this solves ur problem.
Regards,
Moorthy

Problem in idoc to file scenario

hi
while creating the idoc to file scenario i am facing few problems.
1) My design time objects are working fine. i have checked my message mapping, message interface etc.. (all design time objects are in active mode).
2) In ID, i have tested my configuration in test configuration, its working fine there as well (in ID i am using 2 business service one for sender, one for receiver)
3) i am using my ecc6 training server as my sender and using my XI server as receiver.
4) i am sending idoc from ecc6 and converting it to file in XI server and saving it in XI server itself(my receiver in this case).
my error:
i send my idoc from we19 transaction, and i see a error message stating
that 'RCVR_DETERMINATION.NO_RECEIVER_CASE_ASYNC'
my doubts.
1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
kindly help me with this issue.
regards
manoharan

>
manoj murugesan wrote:
> 1) while sending the idoc from ecc6, is it mandatory to give process code in partner profile ( that is, assign an outbound function module to push the created idoc to the mentioned destination).
>
> 2) also is it mandatory to have a partner profile on the receiver side( XI in this case) along with inbound process code.
>
> 3) in my receiver adapter ( file adatper in this case ) i have used NFS protocal. is it rite?
>
>
> kindly help me with this issue.
>
>
> regards
> manoharan
and to 1 & 2 ref. below,
Configuration steps required for posting idoc's(XI) -
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
ALE configuration for pushing idocs from SAP to XI -
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
3. NFS protocol is used to read/write files to the XI server itself. If you have to write to a local machine then use FTP

IDoc to File scenario Monitoring Problem

Hi,
I have a problem in monitoring. In my IDoc to file scenario the ftp server is not reachable (wrong ip) but still in sxmb_moni I get a successful processed message with acknowledgement system error.
Now, why dont I get an normal error in sxmb_moni?
Thanks in advance...

Hi,
>>Now, why dont I get an normal error in sxmb_moni?
Why because in MONI we generally get the Errors related to the Message Processing like mapping, and pipe line Services.
But the error which u got is related to the Receiver, so this we can find out in the Receiver File Adapter monitoring( CC monitoring)
MONI Shows the Errors those are related to the ABAP Satck means if any Errors occurs while going the process on ABAP Stack
But the error which u got is on Adapter Engine Process, so Definately the Error finding place is on Receiver CC monitoring
REgards
Seshagiri
Edited by: N V Seshagiri on Sep 26, 2008 1:17 PM

How to suppress the Acknowledgement Error in IDOC to File scenario?

Hi -
I got the status in SXMB_MONI as 'Processed Successfully' for the IDOC to File scenario but the Acknoledgement status throws an error saying 'Acknowledgement not possible'.
I read one of the documents in the forums on how to suppress the acknowledgement using a table on R/3 side using IDXNOALE,
i tried that option but i still get the 'Acknowledgement not possible' error.
Is there any other way to suppress this error?
Thanks,
Tirumal

Hi Tirumal,
Receiver adapters that run on the Adapter Engine support system acknowledgments if they are requested by the sender. Acknowledgements are triggered when a message is successfully processed by the adapter or if an error occurs while it is being processed. Receiver adapters do not support application acknowledgments. The RNIF and CIDX adapters are exceptions to this rule, since they also support scenario-dependent application acknowledgments. Sender adapters of the Adapter Engine do not request any acknowledgments.
This means, JDBC adapter does only send system acks, however IDoc adapter is requesting application acks. Therefore as mentioned by the previous poster, you have to disable acks for this scenario using report IDX_NOALE.
Also go through these documents for any further help:
http://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how to handle acknowledgments for idoc.pdf
http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
Regards,
abhy

Problem IDOC to File scenario: No service for system SAPIDC, clnt in ID

in IDOC to File scenario, when IDOCis triggered from R/3 to XI, it gives error in SM58 transaction
"No service for system SAPIDC, client 800 in Integration Directory"

In a scenario, i have a BPM which has a transformation step which contains a mutimapping ...means 2 messages mapped to 1 messgaes, here in the mapping i m using an UDF and written code to extract the file name from dynamic configuration.....
the problem is ...the same BPM contains another transformation step which contains a message mapping (which is not multi mapping), and here the code (UDF) works to fetch the file name...
the code is all correct....and it looks like
DynamicConfiguration conf = (DynamicConfiguration)
container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String sourceFileName = conf.get(key);
if (sourceFileName == null ){
sourceFileName = "ErrorFile.xml";}
return sourceFileName;

Problem with IDOC TO FILE Scenario

Hi Experts,
I am doing IDOC TO FILE Scenario.
I have done all the configuration.I have cretaed RFC,PORT,LS and Partner profile at both R/3 and
XI Side.
when I am trying to generate IDOC using we19 and I put the r/3 port,partner in sender and XI
port and partner in receiver it gives me error as "Port 'SAPCU6_100' does not exist in the table
of port descriptions.
Please help me.....
Regards

HI Saras,
Please go through the below weblog which has all the stpes which is required for ur scenario...I think screen by screen help u to debug ur problem and it will help u to find out the msitake which u have made.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag

Regarding IDOC 2 FILE Scenario

Hi Friends,
please help on IDOC 2 File Scenario. I have done tha ALE settings in R3 system and the Idoc has been generated out of r3 system. but how it wiil be sent to XI server can any body help me on this issue.make it as quick as possible.

Hi,
Goto We02 and take the IDOC number froom there.
goto WE19, give the copied idoc number and click on execute.
Check for Control records for that IDOC and say outbound processing
ALE Settings
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
Check this for posting the IDOC From R/3 to XI
/people/sameer.shadab/blog/2005/07/25/reposting-idocs-instead-of-recreating--for-testing-purpose-xi
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI+--
StepsSummarized&
Regards
Seshagiri

Problem regarding the creation of Table using CSS.

Hi ,
Here I have a Problem regarding the creation of Table using CSS.
In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
width:900px;
height : auto,
Overflow : visible,
Max-height: : 200px.
If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
Thanks & Regards
Madhavi

Hey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?

Problem with the EFI system partition's file system.

I installed latest yosemite 10.10.2 update - did a verify disk on “WDC WD1001FALS-403AA0 Media” (internal HD on my iMac 21.5-inch, Mid 2011) and got
Problems were found with the partition map which might prevent booting
Error: The partition map needs to be repaired because there’s a problem with the EFI system partition’s file system.
However a verify disk on the volume partition gets a clean bill of health!
I haven't done a 'repair disk' yet. Thought I'd check if anybody else has same message first.
Cheers

I had issues where my MacPro 8-core would not boot after the 10.7.4 upgrade, but my MacBook Air 13" 2011 upgrade worked just fine.
I had to restore my MacPro HD from my TimeMachine back up. Apparently, the Softraid raid drivers that I use on my MacPro are not compatible yet with 10.7.4. See here for more info:
http://macperformanceguide.com/blog/2012/20120511_1-MacOSX-SoftRAID.html
I contacted Softraid and they are already aware of the issues and are working with Apple for a fix.
Cheers.
Bud

Problem regarding the Payloads in IDOC to file scenario

Similar Messages

Maybe you are looking for