Problem regarding with AD through IDM

Hi,
i want to create organization Units in AD through IDM dynamically....
i.e, whenever the activeSync happens the organizations shoulb created in IDM as well as AD.......
Please give me the suggetion......

Explore directory joins, and then create organizations in IdM.
Can't say I do it with AD, but have with LDAP.

Similar Messages

  • Problem while communicating with ECU through NI USB CAN

    Hello sir,
    I want to communicate with ECU through NI USB CAN interface while i tried to communicate with ECU it gives timeout error. here i am using CCP version 1.0, ECU toolkit 2.1.4 and NI CAN 2.7.2 .if you have any problem that communicates with ECU using CCP version 1.0 Please attach it.
    Thanks and Regards,
    Madhan

    So for the fifth time you start a new thread about the same problem!
    If you don't get any response to your threads, it could be because you are not giving a lot information about your problem.You could start with giving the vi you have problem with, so that we can see what you are doing.
    You also need to give any error code and a description on that you have done, in details!
    You also had one response in one of the other threads, it is polite to make an answer when someone is replying to you.
    [email protected] wrote:
    Hello sir,
    I want to communicate with ECU through NI USB CAN interface while i tried to communicate with ECU it gives timeout error. here i am using CCP version 1.0, ECU toolkit 2.1.4 and NI CAN 2.7.2 .if you have any problem that communicates with ECU using CCP version 1.0 Please attach it.
    Thanks and Regards,
    Madhan
    That makes no sense, where have you copied that from ?

  • A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 &java 2

    A problem regarding set up of Oracle Lite 3.6.0.2.0 on Win 95, with JDK 1.1.8 and Java 2 SDK ( Ver 1.3 Beta)
    After the installation of Oracle Lite 3.6.0.2.0 on a laptop (with WIN 95 OS), When I run Oracle Lite Designer from start menu, I receive following error message :
    ====================================
    Invalid class name 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
    usage: java [-options] class
    where options include:
    -help print out this message
    -version print out the build version
    -v -verbose turn on verbose mode
    -debug enable remote JAVA debugging
    -noasyncgc don't allow asynchronous garbage collection
    -verbosegc print a message when garbage collection occurs
    -noclassgc disable class garbage collection
    -ss<number> set the maximum native stack size for any thread
    -oss<number> set the maximum Java stack size for any thread
    -ms<number> set the initial Java heap size
    -mx<number> set the maximum Java heap size
    -classpath <directories separated by semicolons>
    list directories in which to look for classes
    -prof[:<file>] output profiling data to .\java.prof or .\<file>
    -verify verify all classes when read in
    -verifyremote verify classes read in over the network [default]
    -noverify do not verify any class
    -nojit disable JIT compiler
    Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
    ====================================
    My ORACLE_HOME is c:\program files\ora95_2 and Oracle Lite is installed under the ORACLE_HOME in LITE\DESIGNER directory.
    JDK version is 1.1.8 which is greater than 1.1.4 installed in c:\program files\jdk1.1.8, My PATH, and CLASSPATH are set in AUTOEXEC.BAT as follows:
    set CLASSPATH=c:\Progra~1\jdk1.1.8\lib\classes.zip;c:\progra~1\ora95_2\lite\classes\olite36.jar;c:\progra~1\ora95_2\lite\designer\oldes.jar;c:\progra~1\ora95_2\lite\designer\swingall.j ar
    PATH=C:\Progra~1\Ora95_2\bin;.;c:\Progra~1\jdk1.1.8\lib;c:\Progra~1\jdk1.1.8\bin;C:\Progra~1\Ora95_2\lite\Designer;C:\WIN95;C:\WIN95\COMMAND;C:\UTIL
    And, I can run JAVA.EXE from any directory on command prompt.
    With JAVA 2 SDK (ver 1.3 Beta) instead of JDK 1.1.8 I'm getting a different Error message as follows:
    =============================
    java.lang.NoClassFoundError: 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
    Please make sure that JDK 1.1.4 (or greater) is installed in your machine and CLASSPATH is set properly. JAVA.EXE must be in the PATH.
    ==============================
    the PATH and CLASSPATH were set accordingly, as with JDK1.1.8, and there was no classes.zip in classpath
    also the class file or the jar file looks weird or wrapped in the error message : 'FILES\ORA95_2\LITE\DESIGNER\oldes.jar;C:\PROGRAM'
    Another interesting thing I noticed is if I run oldes.exe from Installation CD, the Oracle Lite Designer runs fine, and without error, I'm able to modify tables in the database of my laptop also.
    Could someone shade some light on what am I doing wrong here ?
    Thanks for help in advance .
    Regards
    Viral
    null

    On 07/20/2015 06:35 AM, Itzhak Hovav wrote:
    > hi
    > [snip]
    > [root@p22 eclipse]# cat eclipse.ini -startup
    > plugins/org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar
    > --launcher.library
    > plugins/org.eclipse.equinox.launcher.gtk.linux.x86_64_1.1.200.v20120913-144807
    >
    > -showsplash
    > org.eclipse.platform
    > --launcher.XXMaxPermSize
    > 256m
    > --launcher.defaultAction
    > openFile
    > -vmargs
    > -Xms40m
    > -Xmx512m
    > [snip]
    Try this: http://wiki.eclipse.org/Eclipse.ini. You should have read the
    sticky posts at forum's top for getting started help.

  • I have a problem regarding sales order line item with confimed quanity

    Hi Experts,
    I have a problem regarding sales order line item with confimed quanity with '0'  with delivery block but confirming the sales order quantity once the order is released from credit check.
    The situation arises as per the below scenarios.
    Scenario - 1 -  When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
    Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx  and the order is set with credit check.  Once the order is relased from the credit check.  The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
    Scenario -2-  Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
    Maintain the stock for the line item 2 ( 5 Pcs).
    Once the order is released from the credit check.  Then  for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
    This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
    Can you please help me how to solve this issue.
    Looking forward for your reply.
    Thanks and Regards,

    Hi,
    I agree with your point.  In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check.  Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5,  But it should set to Zero quantity.  Quatity should not be get confirmed it should be Zero Quantity. 
    Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok.  But we dont want to remove the - Confirmation Block tick mark
    Please any one can help me if you have any solution to solve this problem.
    Thanks and Regards.

  • I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.

    I am having problems interacting with Microsoft Office programs since the last update:cannot create a pdf through the 'print' menu in exel and both Word and Exel docs sent in Mac Mail end up being received as .dat files.
    Both these situations have cropped up on my MacBook Pro since the last update.
    Thanks for your help.
    Cheers
    Bob

    The 'Winmail.dat' problem has been extensively covered in these forums, I would search for that (a Google search works well) and unfortunately I have not seen the pdf print problem before, but assuming the software is current and functions normally (other than the pdf print problem) I have no suggestion other than the obvious (but time consuming) re-installation of Office.
    I wish I had more

  • How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    How can I stop receiving email automatically from the community when they have issues with there problems regarding the apple products.

    Click here for the instructions on stopping the emails.
    (85713)

  • I have a problem regarding af:dataTable with tableSelectOne .

    HI,
    I have a problem regarding <af:dataTable> with <tableSelectOne>. I would like to know how can I pre-select
    the first item of the table? I have tried to search on the net but can't find something useful.
    Any help would be appreciated
    Regards
    Amu

    Ask has the human to know?

  • I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoint​s along with text box. Can anybody help me in this? Thanks.

    I am facing problem regarding graphical user interface. I am using text box for editing files. I want to show the line numbers and graphical breakpoints along with text box. Can anybody help me in this? Thanks.

    Thanks for you reply.
    But actually I don't want to show the \ (backslashes) to the user in my text box. 
    Ok let me elaborate this problem little more. 
    I want to show my text box as it is in normal editors e.g. In Matlab editor. There is a text box and on left side the gray bar shows the line numbers corresponding to the text. Further more i want that the user should be able to click on any line number to mark specific line as breakpoint (red circle or any graphical indication for mark). 
    Regards,
    Waqas Ahmad

  • OK, I'm perplexed.  I've been a mac user for almost 30 years.  My entire ecosystem is Mac and I remained with mac through the dark 90s.  What apple has does in the past 2 years is unbelieveable.  I just upgraded to 10.86, then 10.9, no end of problems

    OK, I'm perplexed.  I've been a mac user for almost 30 years.  My entire ecosystem is Mac and I remained with mac through the dark 90s.  What apple has does in the past 2 years is unbelieveable.  I just upgraded to 10.86, then 10.9, no end of problems.
    I can no longer mirror and of my monitors VGA or HDMI, my itunes which supplies iphone and ipad has disabled podcast app so that I can't listen to my favorite programs and I find out after the fact that Office software is not compatible with OSX 8.6.
    Forget about the fact that itunes looks like it was developed by a 1980s MS-DOS programmer.   Its kludgy, limited and generally does not work.
    What does one do?  Frankly, I used to use macs because they were like info appliances that just worked.  Now the time to manage tech glitches from the company has become way too costly.  Sadly, Apple has become Microsoft and Microsoft seems to become Apple.

    "... as do the users who are downloading recent OSXs in record numbers."
    USUALLY YOU DO NOT KNOW WHAT YOU DOWNLOAD UNTIL YOU HAVE IT !!!
    APPLE USED TO HAVE GREAT STUFF BUT OBVIOUSLY TRIES TO INVENT FOR THE SAKE OF INVENTING !!!
    THIS IS ACTUALLY A STEP BACKWARDS (TO MS).
    CALENDAR & CONTACTS SYNC VIA ICLOUD ONLY IS AN ABSOLUTE NO GO !!!
    @APPLE: FIX THIS ASAP !!!

  • Problem in creating IR through BAPI_INCOMINGINVOICE_create BAPI

    Hi,
    Some problem in creating IR through the BAPI BAPI_INCOMINGINVOICE_create. I am able to see the IR number after executing the BAPI but unable to see the IR number in the table. The IR number is not getting updated in the database table even though we are doing the commit work after executing the BAPI. Could anyone help me out with this error.
    Regards,
    Ram

    First of all I am assuming that you did not get any error in the BAPI return structure (even though you see document number populated).
    Secondly,  I guess you tested the BAPI with SE37 and did not get any error (functionally there are a number of BAPIs available to post an invoice and it is important to figure out the correct BAPI - e.g. PO, non-PO invoice, invoice as a GL entry only, etc.).
    If that is not true (there is some error in posting), since during the BAPI call the next document number is obtained as a first step, you will see the document number but subsequently if for some reason it is not posted, you will see the result as you mentioned (no data in the database).
    If you are using correct BAPI and have no errors, then  in ABAP program make sure to call 'BAPI_TRANSACTION_COMMIT' after the BAPI call to post invoice.
    For non-SAP external system, you need not have to call the commit BAPI but just closing the connection to SAP will help.

  • Profile Type Privilege Assignments through IDM roles are stuck in Pending State

    Hi Everyone,
    We are getting a strange problem in our project in IDM 7.2 SP8. We use IDM role based concept where backend system specific technical roles, profiles (called as privileges in IDM) combined into IDM roles and these IDM roles are assigned to users.
    Events are configured on the privileges level (i,e backend system specific technical roles, profiles) in IDM so that once a IDM role is assigned to a user the corresponding privileges are assigned to user in IDM and these assignments triggers provisioning to associated backend systems.
    Now for role type privileges the provisioning is working fine. But for profile type privileges the provisioning status is always showing as pending and nothing happening and even no logs are showing in job log.
    I tried with execution of the mc_analyze_assignments stored procedure that came with SP08 to find the logs at least but still no information appearing. Looks like the triggering itself is not happening.
    I also compared the member events definition for the profile type privileges with the role type privileges (for which the provisioning is working fine) and looks like the settings are exactly same.
    Can any one suggest any other things that we are suppose to check? Any help is highly appreciable.

    Hello Venkata,
    did I understand correctly: You have business roles, that have SAP-profiles & SAP-roles (both privileges in IDM) assigned. Now you assign such a business role to a user, but only the SAP-roles are provisioned to the backend system and the SAP-profiles are not?
    Since you can see them in the UI for the user as pending, it looks like at least the provisioning is triggered, just not completed.
    You could check with the following SQL-statement, if they are waiting for the sucessful completion of another task and work your way from there:
    select * from mxp_provision where msg like 'Wait for%'
    The MSG-column gives you the audit-id of the "blocking" task and you can find more information about that one via
    select * from mxp_audit where auditid=<auditid>
    to see, what is going on there.
    Also do you have access to the Monitoring-tab via http://<portalurl:port>/idm/admin? In the provisioning-audit you might find some clues for those operations, too.
    Regards,
    Steffi.

  • Red circle with X through it after plugging ipod classic into computer?

    My ipod classic is roughly 5 or 6 years old. It has worked great besides a few problems here and there. Today I plugged it into my computer and updated it on itunes. It had been a long time since I had done this. But generally the ipod works great! Shortly after unplugging the ipod (by ejecting it) a red cross with an "X" through it came on the screen after the music froze. PLEASE help!!! I use this everyday and it has tons of irreplaceable music on it!!! Thanks!

    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/itunes/download/
    For old and other versions of iPod updater for window you can get here
    http://www.ipodwizard.net/showthread.php?t=7369
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iTunes 7 and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
    http://www.ipodresq.com/index.php
    http://www.ifixit.com/
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    Spank your iPod
    http://www.youtube.com/watch?v=3ljPhrFUaOY
    http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    Cant put it into disk mode
    http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
    I think my iPod just died its final death
    http://discussions.apple.com/thread.jspa?messageID=3813051
    Apple logo & monochrome battery stay
    http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
    My iPod ism’t resetting and isn’t being read by my computer
    http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
    Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
    Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote

  • Problem in creating delivery through VL10B

    Hi,
    While creating delivery through VL10B, i am getting error -
    An item with no delivery quantity is not permitted. Item will be deleted.
    What should be error???
    Ref. My previous Thread..
    Re: Problem in creating delivery through VL10B
    Regards...

    In MMBE transaction, there is sufficient stock.
    Please clear, if this will be allocated to other outbound deliveries..then any problem... How can I check this, that it is allocated to other outbound deliveries.
    How can we it found under the stock "Schedule for delivery"..
    Regards..

  • Wierd problem regarding JInternalFrames and OUTLINE_DRAG_MODE

    Hi there,
    I'm currently experiencing a strange problem regarding the use of a JDesktopPane and JInternalFrames.
    Code may look as this, its a random Example as I encounter the same results no matter how I construct the Frame and so on:
    public class Example extends JFrame{
        public Example() {
            this.setTitle("Example");
            this.setPreferredSize(new Dimension(800,800));
            this.setLocationRelativeTo(null);
            this.setDefaultCloseOperation(EXIT_ON_CLOSE);
            JPanel contentPane = (JPanel) this.getContentPane();
            contentPane.setLayout(new BorderLayout());
            JDesktopPane dp = new JDesktopPane();
            dp.setDragMode(JDesktopPane.OUTLINE_DRAG_MODE);
            contentPane.add(dp, BorderLayout.CENTER);
            this.setVisible(true);
            JInternalFrame f = new JInternalFrame("not so cool", true);
            f.setPreferredSize(new Dimension(400,400));
            f.pack();
            dp.add(f);
            f.setVisible(true);
        public static void main(String args[]){
            Example ex = new Example();
    }So, I'm currently using Netbeans and when I'm running any application/project with those settings from inside the IDE
    theres absolutley no problem. As soon as I'm running the Jar file, the drawing of the "outlines" while resizing the InternalFrame
    is kinda laggy and choppy as hell. I spent 2 hours of googling now and I still got no idea why thats the case, so I hope anyone
    here can enlighten me.
    The Java version installed is 1.6.0_10
    regards, me

    AndrewThompson64 wrote:
    (shrugs) Maybe the IDE is using -Dsun.java2d.d3d=false? In any case, very few people around here provide support* for IDEs.
    * Read that as 'speculate on why an IDE does it different - why it works in an IDE'Sir, seems like you got the point, I wasnt familiar with those command line options for the VM before, regarding Graphics options.
    Working fine as soon as I disable D3D. Should've come to that myself but oh well -.-.
    Thanks guys!

  • I get an error message when trying to install windows 7 on my macbook pro. The message says "windows has encountered a problem communicating with a device connected to your computer. I don't have anything connected to my computer. How do I fix this?

    I'm trying to install windows 7 on my macbook pro. I went through the process of bootcamp telling it to install windows 7. Once the windows boot manager started an error message came up. The error message says " windows has encountered a problem communicating with a device connected to your computer. I don't have a usb connected to my computer. I  am using windows 7 professional install disc. I  can't figure out what i am doing wrong. The same message keeps coming up over and over. Am I doing something wrong or is it something else?

    Well, shucks, i just spent almost 30 minutes trying to find your model user guide to explain it better, I guess they never got around to making it.....
    I would just borrow another Windows disk and try installing it again and if it does it again then you might take it to an Apple Store and see if one of the "Genius' " can figure it out.
    Make sure your internet is enabled and click on your blank desktop and at the top of your screen is a Help menu option, enter PRAM and it should give you a list of things relating to Pram. It may take a few seconds to list anything as it has to connect to Apples severs first. It should list the things you may have to fill back in when your done.
    "P-ram" stores some common information that is used in the background, your date, time, startup disk, etc, that you don't have to re-fill when you restart, it's a little different for each computer.

Maybe you are looking for